Used Bolinder Munktell Bm 55 for sale (7,494)

Condition: like new (used), Year of construction: 2019, Smec Revolver, unused, BMT 55. Godpfx Aezw Uz Ishdjbu

Condition: used, Year of construction: 2022, sheet width:1550 mm plate thickness:4 mm pre-bending:6 total power requirement:2,2 kVA weight of the machine ca.:1,42 t dimensions of the machine ca.:2,7 x 0,75 x 1 m roll feed:3,5 m/min Gbedpet Hmlqefx Ahdou Motorised blade roller 3 rolls Material width 1550 mm Material thickness max. 4 mm Shaft diameter 140 mm Roll feed 3,5 m/min

Condition: good (used), Frequency converter, frequency converter, drive inverter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, inverter, servo drive, servo control, power supply, servo amplifier -Manufacturer: Hauser, servo controller servo amplifier 2 pieces with rack -Type: HBV 750 SEO HBMR 55 A4-445 -Price/charge: complete -Total dimensions: 390/250/H310 mm Gedpon Nbmtofx Ahdjbu -Weight: 8.4 kg

Condition: used, maximum load weight: 34,310 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 02/2009, next inspection (TÜV): 12/2026, loading space volume: 55 m³, total length: 11,500 mm, total width: 2,550 mm, total height: 3,950 mm, Year of construction: 2009, Equipment: ABS, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typographical errors, and prior sale: Spitzer feed silo, 55 cm, 6 compartments, 6 dome lids (Vehicle 872) First registration: 06.02.2009 Type SF 27/55/4P Gbjdpjzyzffofx Ahdsu ID 1532, manufactured 2009 -40/ +80 degrees Celsius 2.0 bar operating pressure Permissible gross vehicle weight 34,000/40,000 kg Unladen weight 5,690 kg Payload 28,040/33,040 kg Overall length 11,500 mm x overall width 2,550 mm x overall height 3,950 mm TÜV (technical inspection) valid until 12/2026 1 x LED reversing light 1 x LED work light front + center + 1 x on the passenger side at the rear 55 cbm capacity 6 compartments, 6 dome lids on top Air suspension with raising and lowering function Loosening device Pressure gauges Outlets / filling points on the outside and at the rear Next internal inspection 12/2027, next external inspection 02/2029 Storage box on the passenger side in front of the frame + plastic storage box on the passenger side in front 2 x 12-ton 2-speed gear winch Air suspension with start-stop function (red+black) 1st axle: lift axle with switch BPW drum brakes ALCOA light alloy rims, predominantly Tires 385/65R22.5, 1st approx. 80/90%, 2nd approx. 50/80%, 3rd approx. 80/90% 3rd axle: steering axle Rear view camera Folding access platform with walkway 4 x wheel chocks Hose compartment / storage compartment open on the driver's side Price: €17,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: used, Year of construction: 2024, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. MINI-BMS 105 / Forestry Mulcher / incl. OQ45-5 / incl. CUT CONTROL / 5-10 t / DEMO unit / in stock and immediately available / very good condition Price: €20,090.00 net / €23,907.10 gross - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching attachment for excavators - For mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brushwood and woody material up to 10 cm Ø - For excavators from 5 to 10 tons - Suitable for mounting to various adapter plates - Drive designed for hydraulic motor, depending on the carrier's oil flow - Indirect V-belt drive with 5 V-belts - Reinforced chassis made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along entire hood length - Front guard with chains - Rear guard with chains - Support skids, height-adjustable, reinforced with a carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 – Forestry rotor with fixed MINI DUO tools (2 carbide inserts) 21 pcs, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Godpfx Ahsy Rdnasdjbu Axial piston hydraulic motor with variable displacement 29–58 cm³ and overpressure valve - Displacement in cm³ (min-max): 29 – 58 - Required hydraulic pressure in bar (min-max): 150 – 250 - Required oil flow in l/min (min-max): 60 – 130 Intermediate adapter for BE314 Z1 incl. OQ45-5 adapter plate - Approx. 200 mm height We have many additional adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We stock a wide range of Seppi products, available for immediate delivery! Please contact us for more information at / . Financing options available upon request. We are official sales and service partners for: - Seppi M. - Holp - Magni telehandlers - Gierking GMT - OilQuick - Weber MT - Westtech - DMS - JCB construction machinery - Mercedes-Benz - Iveco With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi range! Errors and prior sale excepted! Internal reference number: 170051 = Further information = Please contact Marius Herden for more details.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 26-291510 R 1368710, Rod-type magazine for bar feeders, FMB TURBO 5-55/3200"A" Godjznl Uaepfx Ahdebu Magazine for bar feeders, FMB TURBO 5-55/3200"A"

Condition: good (used), Year of construction: 2012, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 11 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 55 t, Durma IW 55 Combination Machine (Punching and Shearing) For sale: a Durma IW 55 combination machine (punching machine + ironworker-type shear), with a capacity of 55 tons. Well-maintained, fully operational, and available for inspection at our facilities in Zaragoza, Spain. Gedez Hla Depfx Ahdobu Manufacturer: Durmazlar (Turkey) Type: IW 55/110 Motor: 5.5 kW, three-phase, 50Hz Operating voltage: 400V — Control voltage: 24V Current: 11.5 A — Fuse: 16A Cutting capacities: L-profile at 90° 120x120x10mm, L-profile at 45° 70x70x7mm, flat bar 300x15mm, round bar Ø40mm, square bar 40mm, punching Ø40x10mm Material capacity: up to 45 kg/mm² (65,000 psi) Includes punching and die tooling For technical inquiries or to arrange a visit, please contact us by email. Price: €6,500 (negotiable), VAT not included. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Original spacer rings PAUL in various widths for edging saw KME 2 or BM, outside-Ø 120 mm, bore-Ø 75 mm, with 2 keyways Original PAUL saw bushings with effective clamping lengths of 55 mm and 110 mm for the KME 2 and BM Gbedpfxoiimz As Ahdsu Original PAUL spacer rings in various widths for S 900 re-cutting saw, outside-Ø 150 mm, bore-Ø 110 mm, with 2 keyways

Condition: used, Year of construction: 2018, total width: 1,899 mm, total height: 2,264 mm, total length: 2,580 mm, working width: 1,350 mm, grinding width: 1,370 mm, overall weight: 1,890 kg, table height: 900 mm, Wide-belt sanding machine Manufacturer: SCM GROUP spa Brand: Casadei Type: Libra 55 RTC 135 Year of manufacture: 2018 Weight: 1,890 kg Technical specifications: Max. working width: 1,350 mm Working height (adjustable table): 4 to 170 mm Working height (optional fixed table): 4 to 200 mm Sanding belt width: 1,370 mm Sanding belt length: 2,620 mm Feed rate: 3 stages: 4, 5, and 9 m/min Power of feed motor: 0.45 / 0.8 kW Power of main motor: 11 kW (15 hp) Purchase price net: €30,000 plus applicable VAT. VAT will be shown separately on our invoice. Note: The equipment text or equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing available Upon request, we can arrange suitable financing through our company. Please feel free to contact us. Subject to changes, errors and prior sale. Gbsdpfjz Ippxox Ahdeu

Condition: new, cutting diameter 355 mm dimensions of saw-band 3770 x 34 x 1,1 mm cutting speed 20 - 80 m/min cutting width 490 x 280 mm 290 mm Impact energy 250 mm 230 mm 180 mm connected load frequency 400 Volt total power requirement 2,2 kW weight of the machine ca. 0,7 t dimensions 1,43 x 0,72 x 1,7 m Godpemhm Aqofx Ahdebu Semi-automatic miter band saw - Miter cuts up to 45° left + right - Miter cuts up to 60° right - Vice with quick release device - Tape tension control via manometer - Electr. automatic cooling

Condition: good (used), machine/vehicle number: 48653674643798, Year of construction: 2018, operating hours: 1,872 h, load capacity: 3,000 kg, lifting height: 5,500 mm, fuel type: electric, mast type: other, overall weight: 5,160 kg, Unser TOYOTA 8FBMT30 - FSW 5500 Elektro-Stapler ist eine robuste und leistungsstarke Lösung für den Materialumschlag im Innen- und Außenbereich. Mit einer maximalen Traglast von 3.000 kg und einer Hubhöhe von 5,50 Metern bietet er die perfekte Kombina... Gbjdpfx Aozqb A Eohdeu Unser TOYOTA 8FBMT30 - FSW 5500 Elektro-Stapler ist eine robuste und leistungsstarke Lösung für den Materialumschlag im Innen- und Außenbereich. Mit einer maximalen Traglast von 3.000 kg und einer Hubhöhe von 5,50 Metern bietet er die perfekte Kombina...

Condition: good (used), machine/vehicle number: 48653810237782, Year of construction: 2018, operating hours: 1,394 h, load capacity: 3,500 kg, lifting height: 5,500 mm, fuel type: electric, mast type: other, overall weight: 5,590 kg, Der Toyota 8FBMT35 - FSW 5500 Elektro-Stapler ist eine leistungsstarke und vielseitige Lösung für den Materialtransport im Innen- und Außenbereich. Mit einer Nenntragfähigkeit von 3.500 kg und einer Hubhöhe von 5,5 Metern bietet er die ideale Kombinati... Gjdpfxjzqb A So Ahdsbu Der Toyota 8FBMT35 - FSW 5500 Elektro-Stapler ist eine leistungsstarke und vielseitige Lösung für den Materialtransport im Innen- und Außenbereich. Mit einer Nenntragfähigkeit von 3.500 kg und einer Hubhöhe von 5,5 Metern bietet er die ideale Kombinati...

Condition: reconditioned (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 210610, The POWERvac is an industrial vacuum cleaner suitable for all types of dust, shavings, oil, and water. This H-class version is designed for hazardous fine dusts regardless of MAK value, including carcinogenic and pathogenic dusts, with clean air recirculated back into the work area. Suction takes place in three stages: cyclone separation of liquids, coarse dust and shavings; fine dust separation via the PTFE-coated main/pocket filter; and a final safety filter stage for remaining fine dust. The main filter uses pneumatic POWER shock cleaning during operation (no extra compressed air required), and the mechanical centrifugal separator is maintenance-free. Gbedpfxjzy H R Te Ahdsu - Motor power: 5.5 kW - Airflow: 520 m³/h - Main filter area: 22,600 cm² - Total max filter area (with safety filter): up to 47,600 cm² - Collection container capacity: 100 litres - Suitable for continuous operation

Condition: excellent (used), Year of construction: 2024, machine/vehicle number: A969 W-10752/95000796, functionality: fully functional, power: 50 kW (67.98 HP), WIPA MD1000-55 Centrifical Dryer Washing Centrifuge (2024) 50kW motor power 500200 kg/h throughput depending on material Gbsdpfx Ahoz Hdkzsdsu

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details x-travel 1200 mm y-travel 600 mm z-travel 600 mm Control Heidenhain iTNC 530 spindle speed: 6000 1/min. Gbedpfx Ahoz Rplasdou spindle taper CAT-50 ISO spindle drive (S1) 10 kW table surface area 1300 x 600 mm table load 1200 kg feed speeds 1-10000 mm/min rapid travel x/y/z 20/20/15 m/min distance table - lower edge spindle 125-725 mm total power requirement 25 kVA weight of the machine ca. 7,5 t dimensions of machine 3600 x 2300 x 3000 mm Additional information Equipped with: * CNC control Heidenhain iTNC 530 * Electr. portable handwheel * Spindle oil cooler * Tool changer 24-pos., double arm changer - Max. tool diameter 80/150 mm - Max. tool length 250 mm - Max. tool weight 8 kg * Preparation for hydraulic machine vice * Preparation for 3-D measuring probes * Chip conveyor * Coolant system, coolant through spindle 20 bar * Machine documentation Working hours (date 29. July 2026): - Control on: 60.822 h - Machine on: 59.602 h - Program cycle: 22.283 h - Spindel on: 19.522 h

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 2.7552.069, wire diameter (max.): 6 mm, power of the servo motor: 10,000 W, input voltage: 400 V, type of input current: three-phase, We are offering this very well-maintained Wafios BM 3 wire bending machine, manufactured in 1998, for sale. Godpfxozvdd Ao Ahdsbu Tool set for 3 - 6 mm wire is included. Complete documentation is available. The PC has already been replaced. We mainly produced 3D parts from 3 mm wire – brochure holders in all variations. Everyone knows what happens when you maintain the speed after the third bend... distortion. Therefore, this machine operated at a maximum speed of 15%. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), machine/vehicle number: 53962917871958, Year of construction: 2020, operating hours: 1,024 h, load capacity: 3,500 kg, lifting height: 5,500 mm, fuel type: electric, mast type: other, overall weight: 5,590 kg, Der Toyota 8FBMT35 - FSW 5500 Elektro-Stapler ist eine leistungsstarke und vielseitige Lösung für den Materialtransport im Innen- und Außenbereich. Mit einer Nenntragfähigkeit von 3.500 kg und einer Hubhöhe von 5,5 Metern bietet er die ideale Kombinati... Godpszqb Afjfx Ahdjbu Der Toyota 8FBMT35 - FSW 5500 Elektro-Stapler ist eine leistungsstarke und vielseitige Lösung für den Materialtransport im Innen- und Außenbereich. Mit einer Nenntragfähigkeit von 3.500 kg und einer Hubhöhe von 5,5 Metern bietet er die ideale Kombinati...

Condition: used, Year of construction: 2002, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 380 V, Used Dominioni Punto & Pasta P 55 pasta processing machine, manufactured in 2002. Manufacturer: DOMINIONI PUNTO & PASTA SAS Model: P 55 Serial number: 662 Year of manufacture: 2002 Voltage: 380 V Gedpfx Aszzmg Rshdjbu Power: 3 kW Condition: Used The machine is in good working condition and is suitable for professional pasta production. For further information, additional pictures or videos, please contact us.

Condition: ready for operation (used), Steel angle / Clamping angle / Solid LxWxH 720mm x 650mm x 1550mm Thickness 65mm Weight 790 kg Errors and omissions excepted. Gbedpfoztd U Ajx Ahdou

Condition: good (used), functionality: fully functional, Year of construction: 2009, Still in good condition, well-maintained press brake from the renowned manufacturer Biegemaster. Maximum processing length: 6.2 m. Suitable for material thicknesses up to 1.25 mm. Gbjdpfx Ahsz Dnqgjdeu Equipped with a Knauf profile upper tool.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 2,605 mm, total width: 3,135 mm, total length: 3,055 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, overall weight: 1,050 kg, table load: 200 kg, ambient temperature (max.): 22 °C, ambient temperature (min.): 18 °C, maximum load weight: 200 kg, Equipment: documentation/manual, type plate available, This WENZEL SF 55 coordinate measuring machine is a modern and highly precise solution for the dimensional inspection of mechanical parts. Built in 2021, it is equipped with a 5-axis Renishaw PH20 measuring head, WM Quartis software, and a temperature compensation system, offering high performance in testing and quality control operations. Key features: * Year of construction: 2021 * Measuring range: 500 × 500 × 500 mm * Measuring uncertainty MPEE: 1.8 + L/350 µm * 5-axis Renishaw PH20 measuring head with Head Touch technology * WM Quartis measuring software * Temperature compensation system * WPC 2040 control unit * Complete set of monitor, keyboard, and mouse * Reference sphere included Equipment: - Complete and ready-to-use measuring system - HT400 (RC) control panel - Compressed air maintenance unit - User, maintenance, and operating manual - CE declaration of conformity Otto Machine For over 30 years, Otto Machine has been selecting and selling used machine tools and measuring systems in Italy and abroad. The machines can be viewed at our showroom or via video call. Gbodpszrtm Sjfx Ahdju Contact us to receive the complete technical data sheet, photographs, videos, and all the information about the machine. It is possible to arrange a visit to our showroom or a video call to view it remotely.

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 50 h, overall weight: 640 kg, input voltage: 400 V, input frequency: 50 Hz, workpiece diameter (max.): 400 mm, de machine is in nieuwstaat. neem contact op voor meer info. Godpjzugnhjfx Ahdebu

Condition: used, mileage: 245,123 km, power: 315 kW (428.28 HP), first registration: 05/2023, fuel type: diesel, number of seats: 55, gearing type: automatic, next inspection (TÜV): 12/2026, emission class: euro6, color: white, brakes: retarder, Year of construction: 2023, Equipment: ABS, air conditioning, bathroom, navigation system, parking heater, soot filter,

Condition: excellent (used), Year of construction: 2019, operating hours: 8,000 h, functionality: fully functional, power: 55 kW (74.78 HP), volume flow: 9.7 m³/h, operating pressure: 8 bar, pressure (min.): 4.5 bar, pressure (max.): 8.5 bar, type of cooling: air, Equipment: documentation/manual, type plate available, Fully functional Atlas Copco screw compressor, model GA 55, in new condition. Gsdpfszzq Ewox Ahdebu

Condition: like new (used), functionality: fully functional, fuel type: electric, Material width for the material inlet: 500 mm METRO 55 HACKER – a professional machine for shredding wood waste. A powerful sawmill shredder, designed for shredding wood waste, branches, boards, and production residues in sawmills and wood processing plants. Its robust construction and powerful cutting system ensure reliable and efficient operation even under heavy loads. The machine is ideally suited for the production of firewood chips, biomass, and material for further processing. Material width for the material inlet: 500 mm Number of blades: 2/3/4 Main engine power: 55 kW Power of the feed motor: 2x3 kW Feed speed: 25 m/min Automatic motor load control. Product features: - High work efficiency, - Robust steel construction, Gbsdpfx Ahsz H Tvasdou - Safe material feed system, - Possibility of continuous operation, - Easy operation and maintenance, - Use in sawmills and industrial plants. Application: Shredding wood and sawmill waste, Wood chip production, Biomass processing, Recycling of wood waste.