Used welding robots for sale (60)

Condition: used, Year of construction: 2012, functionality: fully functional, input voltage: 400 V, type of cooling: water, workpiece weight (max.): 500 kg, Cloos robot with Qineo Pulse MIG/MAG welding power source 6-axis industrial robot Arc sensor / Tactile sensor Automatic torch cleaning 2-station operation Nedpfx Apozty D Hehedb Shows signs of wear, but is fully functional The system has already been disassembled and palletized. Installation and commissioning can also be offered.

Condition: like new (used), Year of construction: 2014, operating hours: 715 h, functionality: fully functional, machine/vehicle number: L62500, arm reach: 1,919 mm, total height: 3,200 mm, total width: 4,600 mm, total length: 5,200 mm, input voltage: 400 V, type of cooling: water, We are offering a Yaskawa TIG welding cell from October 2014 in as-new condition, with very few documented operating hours. The unit was used briefly and then decommissioned, as we no longer produce the components for which it was originally acquired. The system features a rotary table with a maximum capacity of 1000 × 1500 mm, enabling the alternate machining of two parts to optimize cycle times and maximize productivity. It is also equipped with a push-wire (wire feeding) system, useful for overlay welding or areas lacking base material. The installed TIG technology is high-performance, designed for applications demanding high-quality and repeatable weld seams. Technical support is available via Roboteco S.p.A. (Yaskawa), offering reliable after-sales service and an international support network. Ndsdpfex Exl Nex Aphob The machine is immediately available and located in Tre Ville (TN), Italy. The asking price includes: - Professional dismantling - Loading onto the buyer’s transport vehicle Detailed photos and further technical specifications are available upon request.

Condition: ready for operation (used), Year of construction: 2019, total height: 2,110 mm, total width: 1,413 mm, overall weight: 640 kg, product length (max.): 1,413 mm, number of axes: 6, This CLOOS QIROX QRC 350-E was manufactured in 2019. It features a maximum payload of 15 kg and a working range up to 4500 mm. Equipped with a QC 2 Master control system, it includes a handheld programming device with an 8.4" touchscreen. The robot supports expansion up to 12 axes and comes with integrated welding software and a digital interface. Consider the opportunity to buy this CLOOS QIROX QRC 350-E welding robot. Contact us for more information about this machine. Extra Information • Robot is completely new and never used • Robotics and Control Unit • Max. payload: 15 kg • Working range: 0–4500 mm • Digital inputs/outputs: 16 • Serial interface: Yes • CAN bus: Yes • USB interfaces: 2 • Flash memory: 8 GB • Buffer module: 24 V • Expandable to up to 12 axes • Welding Technology Power source: Included • Welding interface: Integrated • Welding and function test: Included • Torch cleaning: CMR-8-C torch cleaning device • upright Robotic welding torch: Included • Sensors Tactile sensor: Yes • Arc sensor: Included Technical Data of Workpiece Positioner Nsdpfx Apjx D Hdhjhsdb • Load capacity: 10 kN • Nominal torque: max. 1600 Nm • Tilting moment: max. 8800 Nm • Mass moment of inertia: 900 kgm² • Rotation range: +,- 360° • Swivel range: 370° • Welding Fume Extraction capacity: 3000 - 4320 m³/h • Motor power: 5.5 kW • Connection voltage: 3 x 400V/50 Hz • Noise level: 65 dB(A) • Weight: 640 kg • Dimensions (W x D x H): 1413 x 1413 x 2110 mm

Condition: used, Year of construction: 2006, total height: 1,700 mm, total width: 1,900 mm, total length: 2,300 mm, Empty weight: 1.120 kg - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: S66B18-1-3 - Number of axes [pcs]: 6 - Reach [mm]: 2651 - Load capacity [kg]: 100 - Control: CNC - Transport dimensions: 2300mm x 1900mm x 1700mm (l x w x h) - Transport weight [kg]: 1120kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Njdpjyic Ifefx Aphodb Lukas van Rossum

Condition: used, Automatic Welding System Brand: Motoman / Robotec Model: W45/635/2.2/F1CS - A45 G59 Ndedex Dbiropfx Aphjb Single-station welding system composed of: * 2 six-axis anthropomorphic robots * 1 two-column positioner Wire welding (MIG/MAG)

Condition: excellent (used), Year of construction: 2011, operating hours: 1,000 h, functionality: fully functional, arm reach: 3,000 mm, type of input current: three-phase, load capacity: 500 kg, control cabinet width: 600 mm, control cabinet height: 2,000 mm, overall weight: 300 kg, input voltage: 220 V, controller manufacturer: Tawers, input current: 22 A, pivoting range: 270 °, teach pendant manufacturer: Panasonic, Equipment: documentation/manual, type plate available, Panasonic Welding Robot TA-199WG/PA-C Frame, complete with controller, software, and full set of control cables; Robot Controller GIII Modules for rotator and bearing unit Rotator Pana Dice 500 and rotator, Pana Dice 500 (can operate simultaneously on the machine) Wire feeder Power source for MIG/MAG and TIG welding, Panasonic Tawers Pulse Anthropomorphic manipulator Water-cooled welding torch with anti-collision function Water chiller Tawers TA-1900 WG III Manipulator Number of controllable axes: up to 12 Maximum welding speed - 180 m/min linear Maximum working area: 1895/3790 mm Panasonic Pulse Power Source Welding methods - MIG/MAG and TIG Duty cycle 350A/80% Panasonic Controller 7-inch color display Windows operating system Ndodpfx Ajyzn D Hophsb Panasonic Pana Dice 500 Rotator Max load - 500 kg Panasonic Pana Dice 1000 Rotator Max load - 1000 kg

Condition: used, Year of construction: 1999, total height: 1,700 mm, total width: 800 mm, total length: 1,200 mm, Colour: Yellow - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: R99X75197 - Number of axes [pcs]: 6 - Reach [mm]: 1368 - Load capacity [kg]: 6 - Control type: Fanuc - Transport dimensions: 1200mm x 800mm x 1700mm (l x w x h) Nodpfxowh Spys Aphedb Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, machine/vehicle number: 03250551610001, arm reach: 900 mm, type of input current: three-phase, load capacity: 5 kg, control cabinet width: 440 mm, control cabinet height: 290 mm, overall weight: 200 kg, input voltage: 400 V, protection type (IP code): IP54, repeat accuracy: 0.02 mm, controller model: MC-05 Controller, wire diameter (max.): 1.8 mm, input current: 32 A, pivoting range: 360 °, warranty duration: 24 months, welding current (max.): 500 A, teach pendant model: Teach Pendant Serie MC, Equipment: CE marking, documentation/manual, type plate available, COBOT WELDING CELL METALSELF CI-05 + AOTAI 500A (EX-DEMO FOR TRADE SHOW) Turnkey collaborative welding cell. Demo unit (2025), only 12 hours of operation. Excellent cosmetic and mechanical condition, like new. Plug&Play solution ideal for flexible automation of small/medium-sized batches. Guarantees maximum precision and easy programming without the need for specific certifications. SOLD WITH A 40% DISCOUNT ON THE LIST PRICE. Njdpszw Nvmjfx Aphjdb COBOT SPECIFICATIONS (ROBOT ARM) -Model: Metalself CI-05, Reach/Payload: 900 mm / 5 kg -Degrees of freedom: 6 axes (±180° range per joint) -Repeatability: ±0.02 mm -Protection / Weight: IP54 (industrial use) / 21.4 kg -Mobile magnetic base -Integrated transport trolley CONTROLLER & INTERFACE -Model: IIMT05-220/100 (220V, Single-phase power supply) -Programming: Color touchscreen Teach Pendant (IIMT-TP) -Connectivity: TCP/IP, Modbus-RTU/TCP, 16 DI/DO, 4 AI/AO AOTAI AMIG-500PSR GENERATOR: Top-of-the-line inverter with dual 32-bit ARM processor. -Processes: MIG/MAG, High-efficiency pulsed MIG -Power: 500A at 100% (Duty cycle at 40°C) for intensive use -Power supply: 380V, Three-phase -Wire feeder: Double closed loop, permanent magnet motor SOFTWARE & ADVANCED FUNCTIONS INCLUDED -Drag-to-Teach: Quick programming by manually guiding the arm -Weaving/Swing: Oscillation for vertical welds/fill welds with programmable dwell -Multi-layer & Array: Repetition of passes and matrix (grid) welding -Trajectories: Support for linear, circular, spline, and tube (saddle) paths SAFETY -Integrated collision detection and adjustable sensitivity -Parking brakes on all joints active when power is off -CE compliance (EN ISO 13849-1 PL d) SALE AND SHIPPING -Machine status: Ready for delivery, viewable and testable at our location in Settimo Torinese (Italy). -Warranty: 24 months. -Documentation: CE declaration, cobot manual, welding package manual, in any language. -Shipping: EXW (Ex Works). Packaging and transportation costs are borne by the buyer (can be quoted separately upon request).

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: A05B-2651-B011, arm reach: 911 mm, type of input current: DC, total height: 600 mm, load capacity: 7 kg, FANUC LR Mate 200iD/7L A05B-1142-B301 + R-30iB Mate A05B-2651-B011 | 2017 | complete set Njdpfx Ajywlgqsphsdb FANUC LR Mate 200iD/7L ➤ Catalogue number: A05B-1142-B301 FANUC R-30iB Mate Controller ➤ Catalogue number: A05B-2651-B011 The package also includes the operator panel (teach pendant) and all cabling! The robot is in very good technical condition, dismantled from a working installation, ready for immediate operation. 🔧 Key robot specifications: ✔ Model: LR Mate 200iD/7L ✔ Manufacturer: FANUC ✔ Year of manufacture: 2017 ✔ Number of axes: 6 ✔ Reach: approx. 911 mm ✔ Payload: 7 kg ✔ Repeatability: ±0.02 mm ✔ Robot weight: approx. 27 kg 🔧 Controller: ✔ Model: R-30iB Mate ✔ Catalogue number: A05B-2651-B011 ✔ Power supply: 200–230V Condition: ✔ Visual: very good ✔ Technical: fully functional, ready for operation ✔ Dismantled from a functioning installation 🛠 Service / Maintenance ✔ Last maintenance: May 2025 ✔ Regularly serviced ✔ Ready to work without the need for immediate servicing Applications ✔ Pick & Place ✔ CNC machine tending ✔ Production automation ✔ Packaging ✔ Assembly Additional information ✔ Shipping within the EU possible ✔ VAT and EU invoice available

Condition: like new (used), Year of construction: 2017, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 356801, arm reach: 706 mm, We only used the TIG welding robot for 2 months. The machine is in perfect condition. The extraction system was never in operation. The machine enclosure and welding table are included. The “Ready2_pilot” programming and material feed for welding can be retrofitted at any time. Njdoxw R Nnjpfx Aphodb

Condition: like new (used), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, arm reach: 1,437 mm, For sale: Panasonic robotic TIG welding workstation purchased from ValkWelding. Workstation includes: Panasonic TM 1400 G3 robot (6 axes, reach 1437 mm, payload 6 kg), two-axis L positioner PD1000/500, TIG welding unit Tetrix 352 AC/DC Synergic CW, accessories, and safety equipment. This workstation is distinguished by its ability to safely weld not only steels and stainless steels but also aluminum. The process is highly synchronized with wire feeding and is capable of seam tracking and adapting to changes in arc height. A very versatile device. I am selling this system because our original capacity expectations have not been met (we don’t have work in the hundreds or thousands of pieces). Over its entire lifetime (approximately 5 years), the workstation was powered on for around 200 hours and did actual test welding for less than an hour in total. It is practically in like-new condition. It would be a pity for it to just “collect dust.” Ndedpjy Efmgsfx Aphjb All support has been directly provided by ValkWelding. In case of sale, they will arrange installation, commissioning, and personnel training as agreed.

Condition: excellent (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, arm reach: 2,890 mm, type of input current: three-phase, load capacity: 6 kg, type of cooling: air, Equipment: cabin, On behalf of a client, we are selling a used Easy Arc 01 welding robot cell from OTC Daihen. The welding robot cell was used to a limited extent for training purposes for vocational school students and future operators of welding robots. In total, the system has approximately 100 operating hours. The system was purchased in November 2019 and put into operation in 2020. It has been idle for 3 years, which is why it is now being sold. Due to the low operating hours spread over the years, the system is still in very good condition, almost like new. The Easy Arc was developed by OTC Daihen as an entry-level solution for welding automation. The highly precise welding robot and the already integrated welding table ensure efficient welding production. The compact design facilitates transportation. In addition, the low assembly effort enables a quick start of production. The Easy Arc 01 consists of the following components: - OTC welding robot, type FD-B6: 6-axis articulated arm robot with a load capacity of 6 kg, including robot controller, type FD-11, and touchscreen control panel - OTC MIG/MAG welding system, type Welbee WB-P400: 400A inverter pulsed welding power source with integrated robot interface - OTC torch, type RT3500H: Robot welding torch (45°) with safety forced stop and 4-roll wire feed system, max. output 350A, gas-cooled, collision protection type B integrated - Siegmund welding table: 2000x1200mm and insertion height 950mm, load capacity 3,200kg, 28mm hole pattern with 100x100mm hole grid for accommodating appropriate clamping technology - OTC safety system: Sturdy safety enclosure including dual-channel monitored material gate and "Robot Monitoring Unit (RMU)". The use of RMU ensures that compliance with the predefined working area of the robot according to Performance Level PLd is guaranteed. The system is CE-compliant (as well as compliant with UVV / VDI / DIN) and can be connected to any standard 32A three-phase power outlet due to an integrated residual current circuit breaker (type B). Further technical data: - Positioning accuracy: +/- 0.08mm - Maximum working area in the P-point: Ø2890mm - Memory capacity of the robot controller, type FD-11: 9999 programs - Communication between the robot controller and the welding system via digital CAN-BUS - Welding power source Welbee WB-P400: Output current range 30-400A, output voltage 12-34V, duty cycle 280A/100%, digital inverter technology with high arc stability over the entire current range The system is delivered including extensive accessories (see picture) for steel and aluminum. In addition, an extraction hood is included in the scope of delivery. The Easy Arc is currently still at the customer's site and is no longer in operation. An inspection may be possible after prior arrangement. Transport must be organized by the buyer; loading will be done on-site. If you have any further questions, please do not hesitate to contact us. Nodpfxozkanae Aphodb

Condition: ready for operation (used), Year of construction: 2009, number of axes: 8, Welding robot manufactured in 2009. This CLOOS Romat 320 features an integrated 2-axis workpiece positioner with a vertical rotary turntable plate and an L-shaped tilt axis. It includes a full safety perimeter booth with optical safety light curtains and a dual pendant remote control box for station control. If you are looking to get high-quality welding capabilities, consider the CLOOS Romat 320 machine we have for sale. Contact us for further details. Ndjdpfx Apezg H E Dohob - Load Capacity: 15 kg- Own Weight: 205 kg- Controller Unit Model: ROTROL® II- Interface / Input System: Integrated control cabinet panel with compact teach pendant (handheld programmer), full physical QWERTY keyboard drawer, and display unit.- Component/Workpiece Positioner: Integrated 2-axis Cloos workpiece positioner with vertical rotary turntable plate mounted on an L-shaped tilt axis.- Cell Enclosure: Full safety perimeter booth with blue/orange panel walls, integrated sliding or swing doors, and optical safety light curtains on the loading station perimeter.- Manual Operating Panel: Dual pendant remote control box with emergency stop and multi-button configuration for station control.

Condition: ready for operation (used), Year of construction: 2004, number of axes: 6, Welding robot manufactured in 2004. This ABB IRB 2400L Welding Cell features a robust design with a positioner model ABB IRB 500R and includes Fronius TPS 4000 welding equipment. It comes equipped with essential safety features such as a light curtain and safety fencing. If you are looking to get high-quality welding capabilities, consider the ABB IRB 2400L Welding Cell we have for sale. Contact us for further details. Ndodjzhmryspfx Aphjb - Industrial Robot Model: ABB IRB 2400L- Positioner Model: ABB IRB 500R- Welding Equipment: Fronius TPS 4000- Supply Voltage: 3x400V/PE/N- Cable Cross-section: 5 x 16 mm²- Fuse Protection: 63 A delayed- Compressed Air Requirements: 6 bar, G1/2"- Robot Control Cabinet: Included- Machine Sequence Control Cabinet: Included- Robot Base Height: 800 mm- Safety Equipment: Light curtain, safety fencing, glare protection partition wall, service door (monitored by ABB), rear access protection (mechanical, h=1100mm)- Maintenance Units: Torch cleaning system, TCP Calibration unit- Control Stations: Main start panel, Pre-Reset button- Footprint Dimensions: Approx. 8025 mm (length) x 5500 mm (width)- Center-to-center distance: 2000 mm x 1200 mm turning circle- Load capacity: 500 kg per side of the table / Maximum load difference: 350 kg- machine hours: 68.107h- contains an S4C controller

Condition: used, Year of construction: 2001, Price: On request - Year: 2001 - Documentation available: No - CE certificate present: No - Number of axes [pcs]: 6 - Reach [mm]: 2700 - Load capacity [kg]: 150 Financial information VAT: The price shown is exclusive of VAT Ndjdpfxswnhdtj Aphob VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, A robot-assisted CLOOS welding system is offered. 1) CLOOS robotic welding system, wire feed speed: 30m/min, steel wire spool weight: 15kg, aluminum wire spool weight: 4kg, welding power source dimensions X/Y/Z: 1245mm/470mm/930mm, welding power source weight: approx. 190kg, wire feeder dimensions: 680mm/410mm/235mm, wire feeder weight: approx. 24kg. 2) CLOOS ROMAT 310 welding robot, payload: approx. 10kg, max. reach: approx. 1540mm, max. workpiece weight: approx. 3500kg, control system: CLOOS ROTROL II-D. 3) CLOOS WPV-DP-10000 N workpiece positioner, quantity: 2. 4) CLOOS GLC 503 Quinto welding power sources, quantity: 2. 5) CLOOS main electrical cabinet. 6) Welding fume extraction system. Including safety fence and peripheral equipment. Inspection possible by prior arrangement. Nsdpfszli Acjx Aphsdb

Condition: used, Year of construction: 2019, weight max. 4 t Nodpfszwg I Hex Aphsdb power capacity 4,25 kW torque 3500 Nm

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Kawasaki RA006L Robot with E-Controller Year of manufacture: 2022 Control unit: FE1 E-Controller Max. payload: 6 kg Max. working range: approx. 1650 mm Standard configuration consists of: • Robot kinematics Nedpfx Apjympvtehsdb • Controller (10 m cable to robot kinematics) • Teach pendant (10 m cable to controller) Interfaces: • RS232 • 2x Ethernet (individually configurable) • 2x USB • 32 digital inputs / 32 digital outputs (freely assignable) • User interface on robot upper arm R-Series 12E / 8A / 2x air (10 mm) (The signals from the user interface are available in addition to the 32 inputs and 32 outputs.)

Condition: ready for operation (used), Year of construction: 2019, number of axes: 6, This 6-axis OTC Daihen EASY ARC V02.04 was manufactured in 2019. It features a robot working range with a radius of 1,445 mm and a maximum payload of 6 kg. The integrated welding table measures approximately 2,200 mm in width and 1,100 mm in depth, with a load capacity of around 1,000 kg. If you are looking to get high-quality welding capabilities, consider the OTC Daihen EASY ARC V02.04 welding robot we have for sale. Contact us for further details. Ndsdpfey T Iyfjx Aphjb - System Type: Mobile Robotic Welding Cell (EasyArc)- Robot Kinematics: 6-axis vertical articulated robot- Robot Payload: 6 kg (Max. upper arm load: 10 kg)- Robot Working Range (P-Point): Radius 1,445 mm- Robot Repeatability: ±0.08 mm (Path), ±0.2 mm (Point)- Robot Drive System: AC Servo Motor- Robot Weight: 145 kg- Welding Power Source Model: OTC Daihen Welbee Inverter P400 (MIG/MAG, Gas-cooled)- Power Source Mains Voltage: 3 x 400 V / 50 Hz (+/- 15%)- Power Source Rated Input Capacity: 18.2 kVA- Welding Current Range: 30 - 400 A- Welding Voltage Range: 12 - 34 V- Power Source Duty Cycle: 400 A at 30%- Robot Controller: OTC Daihen FD11 (Model: EAFDB6-S000, Rated Input: 3.1 kVA, Phases: 3, Voltage: 400 V, Freq: 50/60 Hz, Mass: 60 kg)- Safety Enclosure: Lightweight protective housing with setup and loading doors equipped with electric safety interlocking switches- Welding Table: Integrated hole-pattern welding plate table prepared for clamping elements (Dimensions: ~2,200 mm width x 1,100 mm depth, Weight: ~600 kg, Load Capacity: ~1,000 kg)- Table Mobility: Legs equipped with swivel guide rollers and locking brakes- Horizontal Rotary Positioner: OTC Positioner PB Type (Max. payload 250 kg, Rotation speed 26°/s, Torque 205 Nm, Repeatability ±0.1 mm, Weight 110 kg, central bore in flange plate for media feed-through)- Environmental Conditions: Operating temp 0-45 °C, Humidity 20-80% (non-condensing)- max. 100 operating hours- 1 electronic axis is defective and needs to be repaired

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, input voltage: 400 V, type of cooling: water, Equipment: cabin, For sale is a ready-to-use, compact, plug-and-play welding cell: OTC Easy Arc MIG/MAG 3.03. This system combines precise robotic technology with a high-performance, high-end welding power source and a fully automatically controlled horizontal rotary positioner. It is ideally suited for the automated, cost-effective production of small and medium-sized series. The entire cell is mounted on a stable base frame with a welding table/perforated plate and can be easily integrated into your production process. Technical highlights & components: Robot FD-B6: Highly dynamic 6-axis articulated arm robot, optimized for arc welding with internal cable routing (6 kg payload). Controller FD11: Modern robot controller for precise path guidance, including an ergonomic teach pendant for quick programming. Welding power source Welbee Inverter P400: Pulse welding power source (400 A) for spatter-free welding of steel, stainless steel, and aluminum, even at high welding speeds. Easy Arc PB250 Positioner / Horizontal Rotary Table: Fully controlled additional axis (up to 250 kg payload) for precise workpiece rotation, which enables welding in the optimal weld pool position, even with complex components. Safety concept: Complete enclosure including welding protection viewing windows and CE-compliant safety technology for direct use in a workshop. Nedjzvqunspfx Aphedb Condition & scope of supply: The system is in very good, fully functional, and ready-to-use condition, as it has been used only rarely. Scope of supply: Complete welding cell as described, including welding torch equipment, cable package, and documentation. The system is available immediately and can be inspected under power after consultation. Technical data at a glance: Manufacturer: OTC DAIHEN Europe GmbH Model: Easy Arc MIG/MAG V03.03 Year of manufacture: 2024 Power connection: 400 V / 50 Hz B2B sale with exclusion of all warranties. Subject to prior sale. Net price plus VAT ex Philippsburg. Loading can be arranged on-site. Components: Robot welding cell as shown OTC welding robot Easy Arc MIG/MAG 1.03, robot FD B6 Easy Arc PB250 (Move) programmable positioner for automatic component alignment Controller FD11 Welding machine Welbee P400 Additional equipment: Water cooling If you have any questions or require further information, please send us a message or call us. An inspection and demonstration are possible at any time.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, year of last overhaul: 2026, We are offering this very well-maintained TRUMPF TruLaser Weld 1000 laser welding machine, year of manufacture 2023, with low operating hours. The machine has been serviced annually by TRUMPF, with the most recent service carried out in April 2026. The machine is powered on and fully equipped with two rotary axes. Programming is performed directly on the machine, without additional software required. The machine is still in production. Available for delivery in August 2026. Manufacturer: TRUMPF Model: TruLaser Weld 1000 Year of manufacture: 2023 Njdey I Ak Uspfx Aphodb If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 52.693.00, feed length X-axis: 1,525 mm, feed length Y-axis: 1,525 mm, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, Welding Robot – Fully Equipped Vertical Bend Arm Robot 6 axes Reach: 1525 mm Equipped with automatic welding gun, type: DIX MALZ 520 Wire feed device, manufacturer: FRONIUS, type: ROB.VR1500 DINSE-ZA Includes 2 rotary welding tables Plate dimensions: each 1200 × 750 mm Pneumatically driven cleaning device Positioning and straightening station for the torch Current source, manufacturer: FRONIUS, type: welding device TPS 4000 Supplied with technical documentation Note: Ndedpfxerl S Ufj Aphsb The machine can be transported on a standard truck. Technical Attributes Dimensions (L × W × H): approx. 4700 × 3500 × 3800 mm Weight: approx. 5000 kg Year of construction: 2000

Condition: new, Year of construction: 2026, functionality: fully functional, arm reach: 955 mm, type of input current: AC, total height: 955 mm, total width: 955 mm, total length: 955 mm, load capacity: 5 kg, control cabinet length: 5 mm, overall weight: 35 kg, input voltage: 230 V, type of cooling: air, protection type (IP code): IP62, FAIRINO COBOTS – MODERN AUTOMATION FOR YOUR BUSINESS We offer advanced FAIRINO collaborative robots (cobots) designed to increase productivity, improve quality, and enhance safety in manufacturing processes. Thanks to their intuitive operation, fast deployment, and excellent price-to-performance ratio, FAIRINO cobots are the ideal automation solution for small, medium-sized, and large enterprises. Why Choose FAIRINO Cobots? ✅ Safe human-robot collaboration without the need for expensive and complex safety fencing. ✅ Easy programming through hand-guiding, graphical programming, and a user-friendly interface. ✅ Fast return on investment through process automation and 24/7 operation capability. Njdpfxjzaz Eyj Aphodb ✅ High precision and excellent repeatability for demanding industrial applications. ✅ Compact design that allows operation even in limited production spaces. ✅ Easy integration with vision systems, grippers, CNC machines, AGVs, and other automation equipment. Available Models The FAIRINO FR Series includes collaborative robots with payload capacities ranging from 3 kg to 30 kg, allowing the perfect solution for virtually any industrial application. Available models: • FR3 • FR5 • FR10 • FR16 • FR20 • FR30 Typical Applications • CNC machine tending • Welding and spot welding • Assembly and fastening operations • Packaging and palletizing • Quality inspection • Pick-and-place applications • Dispensing and gluing • Sorting and order fulfillment • Logistics and material handling automation Benefits for Your Business FAIRINO cobots help reduce production costs, increase operational efficiency, and improve process consistency and product quality. Their flexibility allows them to be quickly redeployed between workstations and adapted to new tasks, making them an ideal solution for modern Industry 4.0 manufacturing environments. Warranty and Support ✔ 12-month distributor warranty. ✔ Professional technical support and service coverage throughout Europe. ✔ Assistance with implementation, configuration, and integration into existing production processes. Contact us today to find the right FAIRINO cobot for your application and receive a customized automation solution tailored to your business needs.

Condition: excellent (used), Year of construction: 2023, Laser Welding Robot Manufacturer: TRUMPF Model: TruLaser Weld 5000 (LR03) Year of construction: CW 51/2023 – Commissioned: 2024 4,000-watt solid-state (fiber) laser Operating hours: as new, used ADVANCED EQUIPMENT: 30 m LLK (laser light cable) TruDisk 4001 (solid-state, fiber) with 1 LLK-A, 1 unit, incl. chiller, incl. safety package for laser welding Workpiece Processing: Rotary module for shielding gas guidance FusionLine FusionLine combination nozzle Positioners: Rotary-tilt positioner with endless rotation Zero-point clamping system for rotary-tilt positioner Safety cabin extended to 4,800 x 4,800 mm (front x side) Data transmission: OPC UA for Machine Tools Basic (license may be required) EQUIPMENT: Machine: Collision protection KUKA Robot KR 70 Machine status indicator light Compressed air and shielding gas supply Machine designed for ambient temperatures up to 45°C Welding optics Perlator nozzle Welding optics BrightLine Scan Motorized focus adjustment Welding process visualizer Process gas at welding optics Linear nozzle Process gas and crossjet programmable Operation / Programming: KUKA smartPAD Production plan Touch panel with 21.5'' TFT color display Touchpoint user interface Data transfer: USB interface RJ-45 network interface Central Link Remote support interface Online update manager Safety: Work area monitoring Workpiece Processing: Forming gas Further Optional BASE EQUIPMENT: Automatic sliding door Compact dust extractor with 3,000 m³/h Support arm for operator panel Axis adjustment set Robot elevation (extended standard) Data usage agreement TECHNICAL DATA: Type: High Accuracy Robot Number of axes: 6 Rated payload: 70 kg Repeatability: +/- 0.05 mm Rotary-tilt positioner Max. working area: 2,000 x 1,000 mm x 1,200 mm Max. load: 500 kg Rotary table Max. working area: 2,350 mm (diameter) Max. working area (height): 1,150 mm Max. load (per side): 250 kg Rotary changer with turnover axis Max. working area (turnover drum diameter): 1,200 mm Max. working area (length): 2,600 mm Max. load (per side): 750 kg Turnover positioner Max. working area (turnover drum diameter): 2,000 mm Max. working area (length): 4,000 mm Max. load (per side): 1,000 kg Compact rotary changer with 3D clamping plate (rectangular) Max. working area (diameter): 3,000 mm Max. working area (height): 1,250 mm Max. load (per side): 600 kg Max. permissible mass moment of inertia: 600 kg*m² Rotary changer rotation range: +/- 180° Rotary changer rotation time (for 180°): 3.7 s Insert height: 830 mm Compact rotary changer with vertical rotary axes: Ndsdpfx Apow U Ezzehjb Max. working area (diameter): 3,000 mm Max. working area (height): 1,250 mm Max. load (per side): 600 kg Max. permissible mass moment of inertia ring indexing table: 600 kg*m² Rotary changer rotation range: +/- 180° Rotary changer rotation time (for 180°): 3.7 s Vertical rotary axis rotation range: +/- 190° Max. permissible mass moment of inertia vertical rotary axis: 359 kg*m² Insert height: 885 mm Compliance with CE and EU Machinery Directive must be verified by the buyer upon recommissioning if applicable. Original price: over EUR 580,000 This used machine can be inspected under operating conditions. All information provided without guarantee – sale excludes all warranties and liability. Subject to prior sale.

Condition: used, 1 off Fronius weld overlay cladding cell Full working order, consisting of: FPA 9000 Digital System Controller Complete with PA9000-RC Remote Pendant Bore-to-bore software 1 off TT 5000 DC 500 Amp TIG power source 1 off TT 2200 DC 220 Amp HW power source 1 off 2,000mm by 1,000mm Cross Slides Ndedpfxezquk No Aphsb 1 off KD1500 TIG wire feeder 1 off Standard Single Wire Swivel Head Torch Complete with all ancillary connection cable and hosepacks 1 off 10t turntable 1 off Heavy Duty 4x3 Column and Boom Can be supplied and integrated with optional 3t hollow headstock for horizontal cladding TPS can offer additional installation separately worldwide if required.