Used Plasma cutting tools for sale (30)

Condition: used, JÄCKLE Plasma 70S plasma cutting system S/N: 7407 1197 Power: 400 V/19 kVA Continuously adjustable cutting current: 25 - 70 A Cbjb9K0Ade Max. cutting thickness: Quality cut = 20 mm / Separation cut = 25 mm The listed price is the starting price of the auction. Please follow the link to see the current bid and participate in the auction.

Condition: used, Functionality: fully functional, machine/vehicle number: 9880147, Plasma cutting device, plasma cutting machine MESSER GRIESSHEIM type Plasmastar HA 95 Cutting Setting ranges A/V 45/110 IPower 95 / 110 II l 2 Cutting current 70% ED 45 A - 60% ED 95 A Input current 380 V Input power 11.2 A I level 23 A II level Mains connection 16.6,6,6 mm² Slow-blow fuse 63, 35, 25 A Nominal frequency 50 / 60 Hz Protection class IP 23 Cooling type F Insulation class F Length x width x height 760 x 470 x 850 mm Weight 160 kg Workpiece power 25 mm Setting range 2 levels Hand torch PHC 95/140 Mains connection 380 volts, 50 Hz, 32 Amp. connector - Water cooled Drgdep - 8 meter hose package length Ps2Lh - Operating instructions

Condition: good (used), Year of construction: 1994, Plasma cutting system / power source Manufacturer: Kjellberg Type: PA-S75 CNC Year of manufacture: 1994 Cutting current: 40 – 130 A Quality cut: 35 mm Separation cut: 45 mm Gas console: PV-S75W-1 without hose package 280125ä Gva2Mc

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 1 h, Functionality: fully functional, machine/vehicle number: 285033, type of input current: three-phase, input voltage: 400 V, type of cooling: air, overall weight: 25 kg, electrical fuse: 32 A, cutting current: 105 A, hose package length: 6,000 mm, material thickness: 50 mm, air demand: 15 m³/h, air pressure: 5.8 bar, sheet thickness steel (max.): 50 mm, protection type (IP code): IP23, High-end air plasma cutter for manual cutting. Although the system is equipped with a manual cutting torch, it can also be used for mechanical cutting. The interface for CNC cutting is already installed The manual cutting torch with a length of 6 meters is included in the scope of delivery. The system was operated in our application center for demonstration purposes. The system has an effective cutting time of less than 30 minutes. Further technical information can be found in the attached document / data sheet Dnzre9

Condition: used, Functionality: fully functional, PLASMA CUTTING - HYPERTHERM 130XD Bzqrnjxzgw

Condition: excellent (used), I sell plasma cutter hypertherm powermax 800 d very good condition. /////Price listed for 1 pc ///// Plasma cutter Hypertherm Powermax 800 Udpbicb9St Plasma cutter description The Powermax800 plasma cutting system uses an inverter power supply to provide a smooth DC output voltage for superior cutting and gouging of mild steel, stainless steel, aluminum and other metals. The Powermax800's power supply provides a constant output current that varies from 20 to 50 amps, providing optimal performance for all metal thicknesses up to 1/2 inch (12 mm). At 50 amps, the Powermax800 can cut metals up to 3/4 inch (20 mm) thick and cut metals up to 1 inch (25 mm) thick.

Year of construction: 2024, Condition: new, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. Standard equipment: welded steel construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek Software W / Automatic Nesting Position determination of the sheet metal to be cut by laser DURMA Burner height control Double-sided drive system (rack and pinion) AC servo motors for X and Y axis movement CNC control outputs/inputs for the filter unit Consumables Starter-Kit Plasma torch * Ignition console * Burner height regulation with Ball screws on double Linear bearings * Special equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package+ nozzles + Durma THC + ignition console + burner Hypertherm HPR 260 XD + hose package+ nozzles + Durma THC + ignition console + burner Hypertherm + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + burner CE Standard Safety wire Automatic gas console for Hypertherm, Manual gas console for Hypertherm, Nyuh2 Autogenous cutting torches Plasma torch protection system manual plasma angle cutting head, CNC angle cutting head (+/- 45). Single drilling head Multiple drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning lamp for error and program end With over 60 years of experience

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, table length: 60 mm, table width: 60 mm, It is a portable CNC cutting system from the brand manufacturer Thermacut: Input voltage: (VAC) 230V / 120 V, 50/60 HZ, 180 W, 0.5 A Max. cutting area: 3050×1525 mm Max. cutting speed: 3000 mm/min Vertical stroke: 100 mm Drcagz Autogenous cutting area: up to 100 mm Plasma cutting area: up to 35 mm Plasma interface: Yes Burner height control via arc voltage Total weight: 145 KG Scope of delivery: Autogenous torch, nesting software, Operating instructions Mini cutting table: small, portable and robust with water tank for cutting with water 600×600 mm cutting area Grid is replaceable with Drain valve low weight (only 108kg) built-in lockable wheels maximum material load 400 kg can be purchased with plasma device and burner on request!

Condition: good (used), Plasma power source Power source Manufacturer: Kjellberg Type: HiFocus 160i with automatic gas console Cutting data: Puncture up to 30 mm Cutting up to 50 mm 280125ä Bukmpzdp0U

Condition: new, The machines of the Plasma-Jet TrueCut K series are highly specialized cutting systems for the production and one-off production of complex individual parts. Equipped with the latest technology from Eckelmann and Kjellberg and high-quality components from well-known manufacturers, this series is designed for high loads in multi-shift operation. With extensive optional equipment, this series is very versatile and offers tailor-made solutions for specific customer requirements, such as multiple torches, oxy-fuel cutting heads, miter cuts or pipe processing units. Bsadezadj7U

Condition: used, cutting range for steel to 25 mm capacity at 100% / mm cutting medium / weight 223 kg KJELLBERG HiFocus 161i plasma cutting system Powerful cutting technology: The Kjellberg Hi Focus 161 delivers excellent cutting excellent cutting results with a maximum cutting thickness of 1 to 25 mm. It enables precise cuts in a wide range of materials such as steel, stainless steel and aluminium. Dq0Bar Condition: used, in very good and functional condition

Condition: excellent (used), machine/vehicle number: 02 P 0587, cutting circuit: 15 - 40 A Nf0Lh electrical connection: 230 V, 16 A kW space needed: 470 x 250 x 250 mm weight: 10 kg

Condition: good (used), Year of construction: 2011, machine/vehicle number: 118203-6, Offer 24409 Uap20Paqux Technical data: - Portable air-cooled plasma cutter - Cutting current adjustable in 3 stages 45 - 85 - 130 A - Duty cycle 45 A / 100% ED - 85 A / 100% ED - 130 A / 60% ED - Cutting thickness steel quality cut approx. 35 mm - Cutting thickness steel separating cut approx. 45 mm - Pneumatic connection 5 bar - Gas mixer PM - S 45 W - Connection 400 V / max. 38 kVA - Torch package - Ground cable - Space requirement approx. W 750 x H 1050 x D 1000 mm - Weight approx. 350 kg

Condition: good (used), Year of construction: 2013, Functionality: fully functional, HiFocus 360i plasma source from KJELLBERG with automatic gas console and Contour-Cut technology The CNC plasma source HiFocus 360i with 30 to 360 A from KJELLBERG offers a high output (quality cut) of 1-50/60 mm (piercing in stationary position up to max. 40 mm) and a max. material thickness of 80 mm (separating cut). The achievable cutting quality is based on the specifications of DIN EN ISO 9013-432 for thermal processes (plasma range).  Infinitely variable current setting from 10 - 360 A (marking from 5 - 25 A)  Optimum process sequence through microprocessor control  Current reduction for corner, start and end signals  Monitoring of the process sequence during burner cooling, ignition time, pilot arc time, C92Ktae short-circuit time during burner ignition, current source, etc.  Serial data transmission for diagnostics on a PC...  ContourCut technology (see data sheet) Plasma torch connection (PBA) of the HiFocus 360i The PBA unit for connecting the PBL (plasma torch line) to a short torch hose package. Automatic gas console for the HiFocus 360i / FlowControl By using an automatic gas console (FlowControl) for the HiFocus 360i plasma source with the plasma gas valve unit (PGV) and the plasma gas control unit (PGC) for automatic adjustment of the gas quantities, the parameters for a wide range of material grades and material thicknesses can be set. different material grades and thicknesses are set automatically directly via the CNC control. immediately available

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, 2 pcs. plasma cutter Manufacturer: JÄCKLE /jess Model : JETARC PLASMA 100 I Year of construction : 2023 Weight in kg 24.00000 Type of machine Plasma inverter cutting machine Make JESS Type JETARC Plasma 100i Supply voltage 3 × 400 ± 15 % Setting range 30-100 amperes Duty cycle 100 % at 80 A 50 % at 100 A Current setting Stepless Maximum separating cut 50 mm Maximum quality cut 35 mm Dqodgd with hose package and torch Machine trolley Cooling: Inverter Built-in fan Cooling: Torch cooled by compressed air Portable compact unit version Fuse protection in amps 32 amps Dimensions 265 x 560 x 400 mm

Condition: new, The machines of the Plasma-Jet TrueCut H-series are highly specialized cutting systems for the production or individual production of complex parts. This series is designed for high loads in multi-shift operation and is equipped with the latest Hypertherm technology and high-quality extensive optional equipment enables versatile, tailor-made solutions for specific customer requirements. For example with several torches, oxy-fuel cutting heads, miter cuts or pipe processing units. 8Deovxl

Condition: used, Plasma cutter CLOOS type CPS 40/80 Year of manufacture 1990 Power at 60 % ED 80 Amp. Power at 100 % ED 40 Amp. Adjustment range 40 and 80 Amp (2 steps) cutting capacity with steel max. 25 mm Hose package length 5.5 meters Mains connection 400 Volt with 32 Amp. Plug - Hand torch CLOOS dimension L x W x H 700 x 600 x 750 mm weight 160 kg Cdmapakc good condition

Condition: used, Year of construction: 2010, Functionality: fully functional, machine/vehicle number: 11.032.602/05013/3, input voltage: 400 V, type of cooling: water, overall weight: 30 kg, cutting current: 25 A, hose package length: 5,000 mm, ground cable length: 3,000 mm, Product description: Fine marker plasma marker from Kjellberg Finsterwalde For sale is a fully functional fine marker plasma marking device from Kjelllberg Finsterwalde. This device was used reliably until the last day of use and then stored professionally. It is in excellent condition and ready for immediate use. Dpqmzj Technical details: Brand: Kjellberg Finsterwalde Model: Fine marker plasma marking device Hose package: 5 meters long, for flexible and versatile use Condition: The device is fully functional, and you have the opportunity to check or have the function verified in person before picking it up. In addition, we are happy to provide a video demonstrating that the device is in perfect working order. This allows you to see the quality for yourself in advance. Scope of delivery: - Fine marker plasma marking device - 5 meter hose package This high-quality device is ideal for precise marking work and offers you the reliability and performance you expect from Kjellberg Finsterwalde. Inspection, function test and video: We are happy to check the functionality on site. Alternatively, we can send you a video on request to show you how the device works perfectly. Price: On request Don't miss this opportunity to acquire a well-maintained marking machine at an attractive price! For further information, the video or to arrange a viewing appointment, please do not hesitate to contact me.

Condition: good (used), Year of construction: 1997, machine/vehicle number: 71-000988, Offer 24820 Technical data: Xacu8X8Du - Cutting current continuously adjustable 30 - 100 A - Duty cycle 80 A / 100% ED - 100 A / 80% ED - Max. cutting thickness - Steel approx. 32 mm - Aluminum approx. 25 mm - Stainless steel approx. 55 mm - Air connection 5 bar - Gas mixing system - Connection 400 V / max. 14.5 kVA - Space requirement approx. W 800 x H 1650 x D 700 mm - Weight approx. 250 kg

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, Kjellberg 280i little used including hose package / 30m , 15m 2 quick-release heads 370M With automatic gas console Cutting data see PDF Unakfjhe

Condition: good (used), Year of construction: 2012, Functionality: fully functional, Plasma cutter Manufacturer : Jäckle Model : Plasma 110 I Year of manufacture : 2012 Connected voltage , 3 phases 400 Volt, 50 HZ Blembeqp Max. Power consumption 20 kVA Fuse protection 32 A slow-blow Setting range 20 - 100 A Max. Open circuit voltage 250 Volt Duty cycle 70% 100 A / 120 Volt Duty cycle 100 % 70 A/ 108 Volt Max. Cutting thickness Quality 25 mm Separating cut 35 mm Protection class IP 23 ISO class F (155° C ) Cooling type F Dimensions L x W x H 710 x 285 x 485 Weight 29 kg

Condition: used, Plasma cutter, plasma cutter -Equipment: without hose package -Cooling: Water cooled Qk00Rzuhl -Max. Cutting current: 70 A -Mains voltage: 3x400V

Condition: used, Plasma cutter, plasma cutting machine MESSER GRIESSHEIM type Plasmastar HA 95 Make No. 4040 Year of construction 1990 Power 95 Amp. - 60 % ED 45 Amp. - 70 % ED Adjustment range 2 steps Cutting power 25 mm Hand torch PHC 95/140 Mains connection 380 Volt, 50 Hz, 32 Amp. Plug - Water cooled - 8 meter hose package length - Operating instructions Space requirement L x W x H 900 x 480 x 850 mm Ps2Lh weight 160 kg very good condition

Condition: used, Plasma cutter MB - Welding technology type Plasmaprof 50 Identical to CEBORA Machine. No. 244311 Year of construction approx. 1992 Power 50 Amp. = 35 % ED 30 Amp. = 100 % ED Adjustment range 2 stages Hose package length approx. 6 meters Compressed air connection 4.7 bar Mains connection 400 Volt, 50 Hz, 32 Amp. plug Space requirement L x W x H 500 x 350 x 700 mm Bzuikuz Weight approx. 80 kg good condition

Condition: used, Plasma cutter TELWIN type Plasma Arc 65/1 Machine no. No. C 10048-88 Year of construction 1988 Power 60 Amp. = 40 % ED 45 Amp. = 60 % ED 32 Amp. = 100 % ED Adjustment range 3 stages Hose package length approx. 4.5 meters Compressed air connection approx. 6 bar Mains connection 380 Volt, 50 Hz 32 Amp. plug Space requirement L x W x H 550 x 540 x 910 mm Weight approx. 90 kg Bc9U3Vhdf0 Good condition