Condition: good (used), Year of construction: 2008, machine/vehicle number: 61747, Offer 26264 Technical specifications: - Welding current 330 A 35% duty cycle Fpsdo Ad H Uwopfx Actsp - Welding current 250 A 100% duty cycle - Adjustable welding current 10 A - 330 A - Digital voltage and amperage display - 4-roller wire feed, continuously adjustable 0.5 - 25 m/min - 2-cycle - 4-cycle regulation - Pulse setting - Wire burn-back setting - Water-cooled hose pack approx. 4 m - Ground cable - Pressure regulator - Water cooling unit MERKLE, type: WK 230 - 300 - Connection 400 V / 32 A / 18 kVA - Space requirement approx. W 450 x H 1200 x D 1050 mm - Weight approx. 80 kg

Condition: used, Year of construction: 2011, operating hours: 2,591 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,400 mm, total length: 1,250 mm, total height: 4,000 mm, volume flow: 10,000 m³/h, filter area: 100 m², suction capacity: 10,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P10. The main areas of application for these systems are industrial plants/welding shops where point extraction is not feasible or where point extraction is insufficient to maintain air quality in the hall. Laterally mounted ducts with a pollutant collection point at a height of 3 m draw in contaminated air and direct it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses are supplied to clean the cartridge filters automatically at the required intervals. Upon impact, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the hall towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. Parameters: Capacity - 10,000 m3/h Motor power - 11 kW Filtration area - 100 m2 Fan in a sound-absorbing housing Fedsz N Am Uspfx Actjpp Year of manufacture - 2011 Number of operating hours - 2591 h Dimensions: Height - 4.00 m Base width - 1.20 m x 0.80 m Stock number: 1173

Condition: used, Offered for sale is a CNC cutting system for plasma and oxy-fuel cutting. Cutting area X/Y: 3100mm/16100mm. Cutting table overall dimensions X/Y: 3305mm/16220mm. Cutting height: 720mm. Number of extraction sections: 32. Extraction sections X/Y: 30mm/500mm and 2mm/550mm. Cutting support X/Y: Flat steel bars 80mm/5mm. Spacing between cutting supports: 75mm. Control system: Lincoln Electric BURNY 10 LCD PLUS CNC controller. Equipped with: 2 oxy-fuel torches, SAF NERTAJET 120 plasma cutting system, BEUTING cutting table type BT500-1IAK, sectional table fume extraction system, Donaldson TORIT DCE DFPRO 8-IP dust collector, 8 oval Ultra-Web FR filter cartridges, dust collection container with 50l capacity and radial fan with 11kW power. Extraction airflow: 6800m³/h at 3400Pa. Inspection possible by arrangement. Fpjdpfxo Ad Nrfj Actjp

Condition: good (used), Year of construction: 2011, Demmeler Turning Unit Robotix IP 4000 Max. height: 3500 mm Servo-hydraulic drive Fedpfx Acjw Rq Thjtjpp Length: adjustable from 1000 to 12,000 mm Permissible weight: 11,000 kg Rotation: 360 degrees endless

Condition: used, Year of construction: 2022, functionality: fully functional, table length: 6,000 mm, table width: 3,100 mm, sheet thickness steel (max.): 40 mm, cutting length (max.): 6,000 mm, cutting width (max.): 3,100 mm, drill diameter: 32 mm, Equipment: documentation/manual, FICEP KRONOS KR32SP - CNC GANTRY CUTTING SYSTEM PLASMA + DRILLING | YEAR 2022 The Ficep Kronos KR32SP is a CNC gantry cutting system for combined plasma cutting and drilling of steel plates in heavy steel construction. Plasma cutting, drilling, tapping, scribing and marking run in a single pass without intermediate handling. Built in 2022, among the youngest of its class on the used market. CONDITION & REFURBISHMENT Fpsdpfxox H T H Rj Actop Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The KR32SP processes raw steel plates into finished components for steel construction. Plasma cutting, drilling, tapping, scribing and marking are combined on a single machine - a continuous workflow without re-clamping. Typical components: gusset plates, stiffener plates, end plates and connection plates. Target industries: steel construction, bridge building, tower construction and general metalworking. Plasma cutting is performed with a Hypertherm XPR300 power source; Hypertherm True Hole technology for dimensionally accurate hole quality is available. The scribing function transfers part numbers, bend lines and weld positions directly onto the component. CAD/DSTV connectivity and specific programming/interface details are confirmed on request. TECHNICAL DATA - Machine type: CNC gantry cutting system (plasma) | Product line: KRONOS SP - Control: Ficep PC-based CNC control - Manufacturer: Ficep S.p.A., Italy | Year: 2022 | Serial number: 36610 - Max. plate size (W x L): 3100 x 6000 mm - Max. plate thickness plasma (straight): 40 mm - Max. number of straight plasma torches: 1 | Plasma power source: Hypertherm XPR300 - Hypertherm True Hole technology: available - Number of drilling heads: 1 | Tool positions per drilling head: 6 - Max. drilling diameter: 32 mm - Spindle power (drilling head): 19 kW | Max. spindle speed: 3500 rpm - Cutting table: sturdy steel grid, prepared for extraction and filter system - Marking/scribing function: available - Dual-gantry option (tandem): available | Remote diagnostics: available (network/VPN) - Combined processes: plasma cutting, drilling, tapping, scribing, marking SCOPE OF DELIVERY - 1 x Ficep KRONOS KR32SP CNC gantry cutting system (base machine) - 1 x straight plasma torch head (Hypertherm XPR300) - 1 x drilling unit with 6-position tool changer - 1 x cutting table (steel grid, 3100 x 6000 mm, integrated extraction preparation) - 1 x CNC control unit (Ficep PC-based, remote diagnostics via network) - 1 x hydraulic and pneumatic power unit - Technical documentation / operating manual - Further equipment and accessories on request LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Machine weight, footprint and electrical connection values follow on request. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in refurbished Ficep steel-construction machinery - from saw-drill lines to gantry cutting systems. Further Ficep systems on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: new, functionality: fully functional, input voltage: 400 V, compressed air connection: 10 bar, hose package length: 8 mm, air demand: 10.5 m³/h, air pressure: 5.2 bar, EX-TRAFIRE 125HD plasma cutting system, new unit from stock, original packaging * The perfect solution for demanding applications in industry * Extremely high cutting speed and the highest cutting quality, even with long cuts * Cuts sheet metal thicknesses up to 60 mm and more * Suitable for mechanized and manual applications * Beveling with a high material removal rate of 12.5 kg/h and more * Simple operation thanks to a large, clear 4" LCD color display with self-explanatory symbols and TCS for quick torch change * Automatic gas identification (air, nitrogen, argon) and integrated gas-saving function * Fine, deep or wide markings possible * Automatic settings for gas, current, pilot current and compensation for pressure losses Included in delivery: 1 x EX-TRAFIRE® 125HD plasma cutting system, 1 x standard machine torch FHT-EX®125TTM with 8 meters length, 1 x ground cable, 1 x CEE plug 32 A 220/380V, 1 x starter kit * Dimensions: L x W x H: 610 x 310 x 535 mm * Connection voltage: 3x 400 V +/- 15%, 50/60 Hz Fpsdpfx Acs Afglrstep * Torch length: 8 m * Weight: 38 kg (cutting unit), 3.2 kg (torch) * Piercing: 25 mm * Air flow: 175 L/min at 5.2 bar * Max. input pressure: 10 bar * Quality cut up to: 40 mm * Separation cut up to: 60 mm * Brand: THERMACUT * Several units available Delivery/shipping possible at additional cost. Product image is similar.

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 1,100 kg, input voltage: 400 V, total width: 1,650 mm, total length: 2,000 mm, total height: 4,000 mm, filter area: 140 m², suction capacity: 3,800 m³/h, negative pressure: 3,500 Pa, Dust extraction unit, fume extraction for welding, self-cleaning filter, suitable for plasma cutting, laser cutting, sandblasting, shot blasting, and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Fpjdpfx Acjzlzv Ietsp Year of manufacture: 2003 Motor power: 7.5 kW Capacity: 3800 m3/h Inlet diameter: 280 mm Filter cartridges: 9 pcs. Filtration area: 140 m2 Fire damper Noise silencer Dimensions: Height: 4.00 m Width: 1.65 m Depth: 2.00 m Base: 1.33 m x 1.84 m Stock number: 1148

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 620 kg, filter area: 60 m², suction capacity: 5,000 m³/h, negative pressure: 2,500 Pa, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-based system for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Kemper System 8000 The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Fpsdpszil Ivsfx Actep Year of manufacture: 2003 Fans with a power of 5.5 kW. Flow rate: 5000 m3/h Vacuum: 2500 Pa Filtration area: 60 m2 Stock number: 1147

Condition: excellent (used), Rowatec MM 33 Fedpfx Acez Sb Ukjtopp - Transformer welding machine - Transformer with thick copper winding - Power: 330A - 60%, 250A - 100% - Voltage range: 15.8V - 33V - Current protection: 22A, 400V - Stepped voltage adjustment (10 fine adjustment positions, 2 coarse adjustment positions) - Smooth wire feed adjustment - 4-roller wire feeder - Welding modes: 2-stroke, 2-stroke spot welding, 2-stroke timed welding, 4-stroke, 4-stroke spot welding, 4-stroke timed welding - Smooth adjustment of pause duration and welding duration - Wire retraction time after welding

Condition: used, Year of construction: 2013, functionality: fully functional, load capacity: 1,000 kg, total height: 850 mm, total length: 2,000 mm, total width: 1,100 mm, rotary table diameter: 900 mm, overall weight: 1,100 kg, height adjustment type: hydraulic, table load: 1,000 kg, disc diameter: 900 mm, product height (max.): 1,350 mm, faceplate diameter: 900 mm, workpiece weight (max.): 1,000 kg, plate diameter: 900 mm, Equipment: foot remote control, Max load: 1000 kg Table size: Ø900 mm Max. height with vertical table: 1350 mm to middle of table Rotation speed: 0.1 - 1.2 rpm Featured with: Wired remote control Country of origin: The Netherlands Fpjdjz H Npijpfx Actep Motor power: 0,75 kW Machine (L×W×H): 200 x 110 x 85 cm Machine weight: 1100 kg

Condition: good (used), Year of construction: 2019, functionality: fully functional, load capacity: 30,000 kg, total height: 650 mm, total length: 2,500 mm, total width: 1,600 mm, overall weight: 970 kg, table load: 30,000 kg, product height (max.): 500 mm, workpiece weight (max.): 30,000 kg, Equipment: foot remote control, Capacity: 30 Ton Workpiece diameter range: ø 235 mm min. / ø 5.517 mm max. Roll speed: 103–1.032 mm/min Complete with: - Driveunit LPP30-30-FM-WE - Idler unit LIP30-FM - Dual motor drive Fpjdpfxjz H Nq Hs Actep - Radio remote control Euroweld Country of origin: UK Motor power: 2,2 kW Machine (L×W×H): 250 x 160 x 65 cm Machine weight: 970 kg

Condition: good (used), functionality: fully functional, total height: 2,350 mm, total width: 1,200 mm, total length: 2,750 mm, overall weight: 3,500 kg, workpiece weight (max.): 1,000 kg, Workpiece diameter: ø25 - 630 mm (min-max) Torch stroke: 1500 mm Chuck through-hole: ø200 mm Cutting speed: 2000 mm/min Max. workpiece weight: 1000 kg PLC Controller: Siemens C7-633 Cutting process: Plasma cutting or oxy-fuel cutting Fodpfx Acsz H Nzfjtepp Country of origin: Germany Machine (L×W×H): 275 x 120 x 235 cm Machine weight: ca. 3500 kg

Condition: used, TRUMPF Mobile Laser Marking System / Mobile Laser Marker TRUMPF TruMark 5010 Mobile Marker Mobile fiber laser marking system with a hand-held processing unit For sale is a used mobile laser marking system from the manufacturer TRUMPF. The system is suitable for the permanent marking of metallic components, for texts, barcodes, Data-Matrix codes, graphics, and logos, as well as for industrial applications in production and quality assurance. Technical data: Manufacturer: TRUMPF Laser Marking Systems AG Type: TruMark 5010 Mobile Marker Device type: Mobile laser marking system / Fiber laser Fpodpfoz Eh Eyex Actop Year of construction: 2014 Laser medium: Yb:Fiber Wavelength: 1062 ± 3 nm Pulse repetition frequency: 1–200 kHz Pulse duration: 250 ns Max. Marking area size: 50 × 30 mm² Min. Focal diameter: 70 µm Beam quality M²: < 1.6 Electrical connection: 100–230 V / 50–60 Hz Power consumption: 2.5 / 5 A Power rating according to nameplate: 600 W Typical power consumption at rated power: 210 W Protection class: IP40 Dimensions: 460 × 1200 × 980 mm (W × H × D) Weight: 90 kg Processing unit: Dimensions: 190 × 320 × 490 mm (W × H × D) Weight: 5 kg Length of connecting hose: 1.7 m Laser safety class: 1 for metallic workpieces Extraction: integrated Equipment: Hand-held laser processing unit Mobile chassis Integrated touch display Integrated extraction Yb:Fiber laser TruTops Mark operating/marking software Connecting hose Original TRUMPF product documentation Accessories as shown in the pictures Application areas: Laser marking of metallic components Component marking Traceability Static and variable texts Barcodes Data-Matrix codes Graphics and logos Prototype construction Sheet metal fabrication Automotive industry Aerospace industry Scope of delivery: 1 × TRUMPF TruMark 5010 Mobile Marker Hand-held processing unit Touch display Integrated extraction TRUMPF product documentation Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Nameplate present The table shown in the photos or any other items not explicitly mentioned are not included in the sale. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: new, Year of construction: 2025, table diameter: 1,000 mm, – Horizontal capacity: 1200 kg – Vertical load capacity: 600 kg – Table size: 1000 mm – Electrically tiltable – Remote control with cable – Digital display Fsdjliftnjpfx Actjpp – Documentation – 400V

Condition: used, functionality: fully functional, Multi-function welding machine (MIG, TIG, electrodes) Brand: Kemppi Fpsdpjxf Hv Hsfx Actsp Model: Pro 3000 / Promig 500 Water-cooled unit with Kemppi PRO Cool 10 chiller. TIG/electrode welding unit Kemppi PRO TIG 410 - Kemppi TL control panel - Functions for TIG welding: pre-gas, post-gas, arc, high frequency TIG generator Kemppi Pro 3000 MIG/wire welding unit Kemppi PRO MIG 500 - Duty cycle: 500A - 60% - Kemppi ML SYNERGIC control panel - 4 feed rollers - Pulsed arc current with Synergic panel - Dedicated functions for welding steel, stainless steel and aluminum Includes: - TIG welding torch - MIG welding torch - Earth cable - Gas regulator

Condition: new, Year of construction: 2026, CORMAK WL3000 laser welding machine is a professional 3-in-1 device with a power output of 3000 W, designed for laser welding, cleaning, and cutting. It has been developed for industrial plants and workshops requiring reliability, precision, and high operating efficiency. Thanks to fiber laser technology, the machine provides exceptional beam stability and enables processing of a wide range of metal materials while maintaining a minimal heat-affected zone. Main advantages of the machine Maximum power of 3000 W – increased penetration depth and higher welding speed. Water cooling system – ensures stable operating conditions during continuous operation. Ergonomic welding head – lightweight and flexible, with adjustable spot size from 0–5 mm and interchangeable nozzles. Automatic dual wire feeder – integrated with the control system. Welding speed up to 215 mm/s – up to 10 times faster than traditional methods. Ability to process thin materials – for example stainless steel with a thickness of 0.5 mm. Operating modes: continuous / modulated – full control over weld parameters. Welding with or without wire – versatile technological solution. Cleaning and cutting functions – expanded range of applications. Design and technology The machine is based on a fiber laser source with a wavelength of 1070 nm and a 10 m fiber optic cable. Thanks to its compact housing and integrated connections for shielding gases and cooling systems, the CORMAK WL3000 ensures safe and efficient operation. The high-power welding head enables welding at various angles, while the optical system guarantees excellent beam quality and stability. Precision and work efficiency The CORMAK WL3000 laser welder enables fast and repeatable welds without the need for additional finishing operations. Due to the small heat-affected zone, the material structure remains unchanged. Low levels of reflected radiation improve operator safety while maintaining excellent final weld quality. Applications Industrial and manufacturing plants Metalworking, automotive, and HVAC industries Laser welding, cutting, and cleaning of metals: mild steel, stainless steel, aluminum, brass Production of lightweight structures, railings, housings, and precision components Standard equipment Laser welding machine with water cooling system Welding head with focal length adjustment MaxPhotonics laser source Automatic dual wire feeder Connection cables Starter set of nozzles and protective lenses Optional equipment Optical kit for laser cleaning – PLN 1500 net Technical specifications Parameter Value Maximum laser power 3000 W Laser wavelength 1070 nm Fiber optic cable length 10 m Operating modes Continuous / Modulated Shielding gas flow rate 10–15 L/min Welding speed 0–215 mm/s Automatic wire feeder Ø 0.8–2.0 mm Maximum power consumption ≤11.0 kW Fpedpfx Askkbw Usctop Focal length 150 mm Cooling system Water cooling Operating voltage 400 V Shielding gas consumption Approx. 10–12 L/min per wire diameter Dimensions 600 × 1100 × 1100 mm Approximate weight 207 kg

Condition: new, load capacity: 10,000 kg, rotational speed (distance/time): 1,000 mm/min, Capacity: 10Tn Type: Self-aligning Minimum diameter: 320 mm Maximum diameter: 2.800 mm Wheel dimensions: 300 x 160 mm (Diameter x Width) Wheel coating: Polyurethane rubber Rotation speed (Min.-Max.): 100 - 1.000 mm/min. Motor power: 1,1 KW Fedpfxsuf A Aho Actopp Inverter: Danfoss Electrical components: Schneider Included: 1 motor-driven + 1 idler Control unit with 6 meter extension pole and digital display with the speed of rotation.

Condition: good (used), Year of construction: 2017, operating hours: 12,900 h, functionality: fully functional, machine/vehicle number: 20170777, repeat accuracy: 0.03 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.06 mm, type of input current: three-phase, input voltage: 400 V, operating pressure: 4,000 bar, power of the servo motor: 37,000 W, feed length X-axis: 4,000 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 200 mm, total height: 3,500 mm, total length: 6,200 mm, total width: 3,200 mm, water pressure: 4,000 bar, control cabinet height: 1,950 mm, compressed air connection: 7 bar, pump pressure: 4,000 bar, control cabinet width: 800 mm, overall weight: 7,500 kg, product height (max.): 200 mm, input frequency: 50 Hz, power: 37 kW (50.31 HP), Equipment: safety light barrier, Waterjet cutting system Perndorfer type WSS4020, table size 4000/2000 mm, high-pressure pump BFT Ecotron with 37 kW and 4000 bar cutting pressure, 3D cutting head for contour cutting. The machine is used and in good condition, and has recently undergone an overhaul by the manufacturer. The machine can be inspected and tested at any time. Fpodpex H Ny Tjfx Actjp

Condition: good (used), Year of construction: 1989, machine/vehicle number: 28913707-1, Offer 24014 Technical specifications: - Rated power at 50% duty cycle: 40 kVA - Max. welding power: 118 kVA - Adjustable overhang: 225 - 550 mm - Welding parameters: Fpjdpfe Agunhex Actjp - Steel sheet: 4 + 4 mm - Brass sheet: 2 + 2 mm - Aluminum sheet: 1 + 1 mm - Adjustable electrode force: 65 - 390 daN - Required air pressure: 6 - 10 bar - Cooling water flow rate: 8 l/min - Control for: holding time, welding time, - post-weld time + open time, as well as - pulse time + pause time - Voltage: 380 V - Space requirement: approx. W 600 x H 1350 x D 1550 mm - Weight: approx. 330 kg - Includes: - Complete electrical and pneumatic system - 6-time synchronous control MPS 1036 - Foot switch

Condition: good (used), Year of construction: 2022, functionality: fully functional, track width: 2,600 mm, total length: 6,000 mm, table length: 4,000 mm, sheet thickness (max.): 150 mm, Equipment: documentation/manual, Zinser flame cutting machine from 2022, in very good condition. Sold without fume extraction system/table. Plasma cutting unit may be sold at an additional cost, but is not currently included in the sale. The machine is still in production and can be tested at any time; availability by arrangement. Equipment can be provided for dismantling and loading; price is ex works. Fedpfj Ahdrkox Actepp

Condition: good (used), Year of construction: 2010, machine/vehicle number: 235654, Offer 26284 Technical data: - Inverter DC welding machine for MIG-MAG – Pulse – Standard – and - E-hand (stick) welding - Welding current 330 A 25% ED - 250 A 60% ED - 210 A 100% ED - Welding current continuously adjustable from 5 to 330 A - Wire diameter steel – stainless steel – AL 1.0 / 1.2 mm - Program control M3-10 with 4 main welding programs - Digital display for welding voltage, current and parameters - Adjustable parameters: wire feed speed m/min, welding voltage correction - Dynamics, wire burn-back time, gas post-flow time, etc. - Wire feeder Drive 4 L P with 4-roller drive and program control - Roller wire feed continuously adjustable 0.25 - 24 m/min - 2-cycle + 4-cycle regulation + special functions, spot welding - Water-cooled hose pack approx. 4 m - Ground cable - Pressure regulator - Intermediate hose pack machine – separate wire feeder case 5 m - Connection 400 V Fpodpfx As Afwyljctsp - Space required approx. W 500 x H 1350 x D 1050 mm - Weight approx. 200 kg

Condition: used, laser type: CO₂ laser, laser source model: Laser Coherent CO2, workpiece weight (max.): 100 kg, - Laser Tube LT8 year 2009 - Machine hours: 80.000 - Automatic profile loader with 8500 mm, bundle management system. Rear installation side - Manual loader for single bar length 8500 mm. Front installation side - Automatic support/unloader for cut parts with a maximum length of 8500 mm, max. unloading length 8500 mm. - Metal conveyor with evacuation on the back for waste up to 350 mm. - Evacuator for cut pieces with max. length = 500 mm. - Piece collection bench on the front side - 3D head integration with inclination from + 45° to - 45° - 7.5" Lens and Lens Holder - 5" Lens and Lens Holder - Active Piercing LT8: device for controlling and optimizing the piercing process - Optical weld seam detection device - CO2 Rofin Sinar DC035 - 3500 Watt laser source - Closed circuit chiller for laser source Rofin DC 030-035 - Smoke extractor - USB key for Artube software Fsdpfx Acoza S Ifstopp - CAD – CAM Artube [first license] - IGES / STEP Artube import module [first license]. - Artube Post Processor for LT8 [first license] - Artube Service Contract [one year] - Remote assistance equipment for VPN Internet connection.

Condition: excellent (used), For sale: Professional SOYER BMS 800-90 stud welding machine from a renowned German manufacturer. This device is designed for industrial stud welding using the spitzenzündung (contact ignition) method. Ideal applications: - Steel construction - Industrial production - Metalworking and assembly workshops Fpodpsz Smnvsfx Actop ⚙️ Technical data: Manufacturer: Heinz Soyer Bolzenschweißtechnik GmbH Model: BMS 800 Type: BMS 800-90 Year of manufacture: 1991 Power supply: 220 V Frequency: 50–60 Hz Charging voltage: 60–190 V Capacity: 90,000 µF Max. current: 8 A Protection class: IP21 Made in: Germany (West Germany) 📦 Included: - Control unit - Welding gun - Power and work cables - Ground clamp 📊 Technical condition: - Used device - Shows normal signs of use consistent with operation - Visual condition as shown in the photos - Not tested under full load ✅ Advantages: - Robust industrial-grade construction - Proven German technology - Compact and mobile casing - Easy operation 🚚 Shipping: Courier shipping or personal collection available. International shipping is possible.

Condition: good (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: P2060, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser source manufacturer: RAYCUS, laser source model: fiberlaser, laser power: 3,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, workpiece weight (max.): 27 kg, input voltage: 380 V, input frequency: 60 Hz, type of input current: three-phase, type of cooling: water, overall weight: 12,000 kg, total length: 12,000 mm, total width: 5,000 mm, total height: 5,000 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, Fiber laser tube cutting machine Golden Laser P2060A-3D 3000 W for sale. The machine is in daily production use, fully functional, and can be inspected while powered on. Main configuration: Laser source: Raycus 3,000 W fiber laser Cutting head: 3D 5-axis bevel cutting head with auto focus CNC control and software: PA (Germany) Nesting software: Lantek (Spain) Servo motors: Yaskawa (Japan) Reducers: APEX (Taiwan); gears and rack: alpha (Germany) Linear guides: HIWIN (Taiwan) Proportional valve: SMC (Japan) Main electrical parts: Schneider (France) Chiller: Tongfei Automatic bundle loader (load size 800 x 800 x 6,000 mm) Fpjdo Afwzwjpfx Actep Automatic unloading / collecting device (max. collecting length 3,000 mm) Pneumatic double chucks with auto-centering Floating support system and floating rear material support Weld seam recognition camera (round and rectangular tubes) Automatic lubrication Dust extraction unit / air dust dryer 5.5 kW Technical data: Tube diameter range: 20–200 mm Max. tube length: 6,000 mm Tube types: round, square, rectangular, oval, obround, H, angle, I and irregular profiles Max. tube weight: 37 kg/m Remnant length: 50–80 mm (Ø < 100 mm), 180–200 mm (Ø ≥ 100 mm) X/Y positioning speed: 95 m/min X/Y acceleration: 1.5 G Chuck rotation speed: 160 rpm Positioning accuracy: ±0.03 mm Axis travel: X 7,180 mm / Y 250 mm / Z 125 mm Axis motor power: X 3 kW, Y 2 kW, Z 2 kW Machine power: 30 kW, 380 V AC, 50/60 Hz Machine weight: approx. 12 t Footprint: approx. 12 x 5.5 m Year of manufacture: 2022 Location: Slovenia Inspection and test cutting possible by appointment.

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 20,000 kg, Equipment: documentation/manual, foot remote control, Protec container rotator, 20-ton lifting capacity, complete set Fpedpfx Aszxxhzsctjp incl. foot and hand remote control Component diameter 500 - 3500 mm Speed continuously adjustable from 100 - 1000 mm/min. Motor power 1.5 kW Dual drive Drive wheel diameter 290 mm Drive wheel width 140 mm