Condition: new, Year of construction: 2026, Top quality made from high-strength structural steel Q355, including plasma nitriding and calibration. 3D perforated table 4000 x 2000 x 200mm, 100mm grid, plate thickness 20mm, hole diameter 28mm. Surface finish machined, very robust, weight approx. 2400 kg. With table base, adjustable in 8 positions. Price excludes accessory set, surcharge €500. Packed in a wooden crate, shipping on request. The stated price refers to the table in standard version without plasma nitriding (last 4 pictures). Price for high-strength steel Q355, stainless and impact-resistant including plasma nitriding: surcharge €1800 (as shown). Ndodjyg Ex Dopfx Adcjc

Condition: good (used), functionality: fully functional, Welding positioner, Deuma, 1500 kg load capacity very robust Welding current transmission 600 A Disc diameter 1100 mm Height when tilted to center 900 mm Height in horizontal position 1100 mm Length 1500 mm Njdpfx Adozvvckjcjdc Width 1000 mm Speed continuously adjustable, approximately 0.1 - 1.2 rpm Tilt continuously adjustable up to approximately 120° with hand and foot remote control

Condition: good (used), TIG hose assembly, welding torch, hand welding torch, TIG torch Nodpfx Aoz Dtqredcodc -TIG hose package: gas-cooled -Length: 8 m -Connector: 4-pin -Dimensions: 400/400/H80 mm -Weight: 3.6 kg

Condition: good (used), TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled -Length: 8 m Ndedpfxjz Dtuwj Adcoc -Connector: 4-pin -Transport dimensions: 400/400/H90 mm -Weight: 3.2 kg

Condition: good (used), Equipment: foot remote control, The rotary table is motor-driven and features a foot switch; the clamping range can be adjusted to suit any component. Upon request, a perforated table of any size can be supplied. Ndodpfjz Hvl Rox Adcec 3000 kg load capacity, motor-driven braking system. One side is driven, the other side rotates passively. Center height from the floor: 1000 mm, mounting plate size: 700 x 450 mm. Two sets of the same size are available.

Condition: excellent (used), functionality: fully functional, load capacity: 3,500 kg, 3-axis ESAB welding positioner, 3500 kg load capacity in very good condition complete with accessories, including foot and hand-held remote control Clamping plate diameter 1100 mm Njdpszk Rbdsfx Adcjdc

Condition: like new (used), functionality: fully functional, load capacity: 1,000 kg, Equipment: documentation/manual, Lifting, rotating 360°, swiveling 360°, also overhead operation Severt L manipulator, 4 units, lifting capacity of 1000 kg and 2000 kg, price per unit PRODUCT TYPE S10 TYPE CODE S10.1-1HH 1000 kg / 2000 kg LIFTING CAPACITY (KG) 1000 / 2000 kg LIFT (MM) 1000 ARM LENGTH (MM) 1500 / 2000 Torque CLAMPING PLATE (NM) 1400 BENDING MOMENT SUPPORT ARM (NM) 3000 FREQUENCY CONVERTER yes LIFT DRIVE hydraulic Ndedpjzk Rdxjfx Adcsc SELF-WEIGHT (KG) 1700 All machines come with documentation and operating instructions. Price per unit.

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, Single-column lifting and rotating device, 5-ton load capacity, mono, mobile, lifting and turning. Protec turning device / positioner Syncrolift. Drive column with adjustable height, remote control (wireless and manual). Electric column adjustment with powered travel carriage. Load capacity 5,000 kg, 360°. Minimum working height: 800 mm. Maximum working height: 1,700 mm. Speed: 0.5 rpm. Clamping plate diameter: 900 mm. Rotational drive: 2.2 kW. Ndodpow H R I Eofx Adcoc

Condition: excellent (used), functionality: fully functional, load capacity: 750 kg, Equipment: foot remote control, APS welding rotary table DSE 750 kg Speed continuously variable from 0 - 1.7 rpm. Length 1250mm, width 1550mm, height 940mm Height from floor to center of hole min. 500mm, max. 780mm Diameter of clamping disc 600mm Ndjdpfxsv A Rppo Adcoc Hollow shaft or hole 110mm

Condition: new, Year of construction: 2024, load capacity: 3,000 kg, Equipment: foot remote control, 3000 kg load capacity welding rotary table, very robust Speed continuously adjustable from 0.05 to 0.7 rpm Rotary table diameter 1400mm Inclination up to 120° Height horizontal 1300mm, tilted to the middle 1050mm Ndedpov En U Iofx Adcsc Length 2.0 m x width 1.4 m Handheld remote control with digital display and double foot remote control

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 2,000 kg, Protec KT 2000 kg load capacity Nodpowk Hzpefx Adcjdc Horizontal capacity: 2000 kg Tilt capacity: 2000 kg Clamping disc diameter: 1300 mm Horizontal height: 1250 mm Tilt height to center: 1080 mm Length: 1600 mm

Condition: new, Year of construction: 2026, load capacity: 10,000 kg, Column lifting and rotating device, 10 tons lifting capacity, available as a set or individually. Driven on 2 sides. The machine is offered as a set for synchronous operation or individually. Protec rotating device / positioner Syncrolift. Double column, hand-held remote control, wireless and manual. Column adjustment, 2x electrically adjustable (at extra cost). Lifting capacity 10,000 kg, 360°. Minimum working height: 800 mm. Maximum working height: 1700 mm. Speed: 0.5 RPM. Ndedowtq Dtjpfx Adcec Diameter of clamping plate: 900 mm. Rotating movement: 2 x 2.2 kW. Torque: 18950 Nm. The machine is also offered individually as a mono model (more affordable). Optional with a universal joint flange (cardan flange).

Condition: excellent (used), load capacity: 250 kg, Equipment: foot remote control, 250 kg load capacity welding positioner, 2 identical units available with 380mm or 400mm chuck, top condition electrically tiltable Nedpfx Aewtrtcsdcodc very robust Continuously variable speed from 0.15 to 2.0 rpm Current transmission 300 A Turntable diameter approx. 500mm Tilting up to 135° Height (horizontal) approx. 900mm, tilted to center approx. 800mm Length 950 mm x width 600 mm

Condition: excellent (used), functionality: fully functional, load capacity: 650 kg, Equipment: foot remote control, Tilting rotary table with 650 kg load capacity, foot remote control Faceplate diameter: 850 mm Rotational speed: 0.01–2.0 rpm Njdpfxswtrumj Adcedc Mass coupling: 300A Optionally available with 3-jaw chuck Tilted height: 900 mm minus 120 mm Horizontal height: 950 mm minus 120 mm

Condition: excellent (used), Severt L manipulator, 4 units, lifting capacity of 1000 kg and 2000 kg, price per unit. PRODUCT TYPE: S10 TYPE CODE: S10.1-1HH 1000kg / 2000 Kg LIFTING CAPACITY (KG): 1000 / 2000 Kg STROKE (MM): 1000 ARM LENGTH (MM): 1500 / 2000 BENDING MOMENT CLAMPING PLATE (NM): 1400 BENDING MOMENT ARM (NM): 3000 Ndsdpfezbl Sgox Adcsc FREQUENCY CONVERTER: yes LIFTING DRIVE: hydraulic SELF-WEIGHT (KG): 1700

Condition: good (used), load capacity: 3,000 kg, Protec Reiss welding rotator, optionally with a perforated table, size as desired. 360° rotation. Adjustable axis. Can be used without a perforated table for customer-specific parts or with a perforated table. Table height, top surface: 1.16 m. We have several of these rotators in stock. Additional cost for a new perforated table: €2,600 (2.0 x 1.0 x 0.2 m). Ndsdpfx Adsziyh Dscsc

Condition: good (used), functionality: fully functional, load capacity: 1,500 kg, 3-axis PEMA welding positioner APS 1500 - stepless height adjustment - includes handheld remote control - maximum load 15,000 N - 1,500 kg - rotation speed 0.07 - 1.3 rpm Njdpfxexxv Rte Adcjdc - rotation torque 1,000 Nm - hydraulic tilting up to 135° - tilting moment 3,000 N - max welding current 700 A - table diameter 700 mm - height 780 - 1,550 mm - dimensions 1,640 x 810 mm - connection 3 x 400 V / CEE 16A - weight 730 kg We have several of these tables available

Condition: like new (used), functionality: fully functional, load capacity: 2,000 kg, Equipment: foot remote control, Demmeler Ergonomix M-2000 Perforated Plate, original 1.0m, diagonal 1.1m, 28mm holes Almost unused, like new, top condition Thanks to the ingenious arrangement of the entire mechanism, the developers at Demmeler have succeeded in creating an unbeatable large working area while maintaining a compact footprint for the Demmeler Ergonomix®M manipulator. The manipulator always brings maximum loads into the ideal position. A special feature of the Demmeler Ergonomix®M product family is the wide swivel range of up to 180°. This provides a decisive advantage for many workpieces, allowing them to be fully machined in one clamping setup without the need for additional repositioning. Njdpfoy Hl N Djx Adcsdc Payload 2000 kg Model M2000 A = min 490 mm B = max 970 mm C = max 1480 mm D = max 1000 mm Torque 1250 Nm Tilt Angle 180° Tilting Moment 8000 Nm

Condition: new, Welding electrodes 68 HH UTP, 4 mm diameter, 365 mm long Nsdpfjyml Ufex Adcedc

Condition: good (used), functionality: fully functional, load capacity: 7,500 kg, Welding rotary table, Tehag, 7500 kg load capacity Very robust Njdpfszfpmhsx Adcjdc Condition: very good Diameter: 1500 mm Height in horizontal position: 1150 mm Height in tilted position (to center): 950 mm Variable speed: 0.01 - 1.5 rpm Tilt: max. 135°, infinitely adjustable Length: 2.6 m Width: 1.4 m Handheld and foot-operated remote control

Year of construction: 2023, condition: new, PLASMA CUTTER MODEL MTX 2040 - VENTILATED Construction: Steel + Aluminum Working area: 4000/2000/200 XY axis drive: Double-sided gantry drive: 4Nm stepper motors with gearboxes, toothed racks Z axis drive: Stepper motor, ball screw Travel speed: Up to 25 m/min Z axis control system: THC My plasm system Linear guides: TBI IGUS guide Automatic material detection system Power supply: 240V Permissible load: 2000 kg Total weight: 800 kg net USB port for opening projects and transferring files using external pen drives Sheet metal detection system THC cutting height control system TBI linear guides Double-sided gantry drive: X axis: Stepper motor and toothed racks Y axis: Stepper motor and toothed racks Z axis: Stepper motor and ball screw Drives implemented using TBI HGR 20 rails Ventilated table adapted for fume extraction INCLUDED: - Ventilated table - Control software in Polish - CE declaration of conformity - Technical documentation - Warranty - Commissioning and training included The latest control system available in our cutters: Integrated THC height regulator Anti-torch plunge function Supported file types: DXF, PLT (hpgl), G-codes (.tap) Integrated CAM module: MyMini CAM Automatic recognition of external objects Path analysis in advance Database of cutting parameters Project angle correction for the material Possibility of cutting from any location Possibility of cutting from the end Import DXF, PLT or G-CODES Automatic generation of paths with offset, entry and exit points The program can be used with external CAM software Separate speed for holes Parameter database Project correction to the material layout angle Software and hardware limits Anti-plunge THC functions Game Pad control possible Material detection via touch system, floating torch head WHY IS IT WORTH IT? WE ARE A POLISH MANUFACTURER OF PLASMA CUTTERS CLOSE COOPERATION WITH PROMA-ELEKTRONIKA (THC MANUFACTURER) HIGH-QUALITY GUIDES FROM THE RENOWNED HIWIN COMPANY, CHARACTERIZED BY VERY LONG LIFE AND HIGH CUTTING QUALITY, WHICH DOES NOT REQUIRE FURTHER PROCESSING COMPONENTS SUCH AS GEARBOXES, MOUNTINGS, HOLDERS, ETC. ARE MANUFACTURED BY US USING CNC TECHNOLOGY, WHICH GUARANTEES HIGH QUALITY AND REPEATABILITY Ndodpfx Adeiphu Iocec OUR STRENGTHS: HIGH-CLASS SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT AFFECTED BY DUST OR JAMMING ADVANCED THC MY PLASM, SMOOTH TORCH OPERATION CPC INTERFACE (VOLTAGE DIVIDER) MOUNTED IN THE CUTTERS WE MOUNT CUTTERS SUPPLIED BY THE CUSTOMER OR PURCHASE CUTTERS THAT MEET THE CUSTOMER'S REQUIREMENTS WE HELP WITH ARRANGING LEASING Possibility of selecting the appropriate cutter to meet the individual needs of the company. We offer other table dimensions.

Condition: like new (used), Year of construction: 2020, Welding positioner table for sale Sale only within EU member states! No private sales. MAE can be inspected upon request. Ndodpfjz Rxz Rex Adcjc All warranty rights are excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations.

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 84,893 h, machine/vehicle number: A0420A0151, control type: CNC control, controller manufacturer: Siemens, controller model: Siemens Sinumerik 840D (TRUMPF MMC), laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser source model: TLF 3200, laser hours: 32,832 h, laser power: 3,200 W, type of cooling: water, year of last overhaul: 2019, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, TRUMPF Trumatic Lasercell 1005 – 3D Laser Welding System (3.2 kW) Used, ready-to-use 3D laser welding system (Type TLC 1005) Special modification for 3D laser welding (adapted beam guidance) Laser cutting is not possible in the current configuration Special version with a powered rotary table for highly precise round and multi-sided processing Ndsdpoz Rziksfx Adcec Basic data & performance: Manufacturer: TRUMPF Laser- und Systemtechnik GmbH Model: Trumatic Lasercell 1005 (Type TLC 1005) Year of manufacture: 2005 Laser power: 3,200 W (Resonator TRUMPF TLF 3200) Serial number: A0420A0151 Connected load: 68 kVA Operating hours: Processing time (beam on): approx. 32,832 h (pure welding time with active laser beam) Operating time (laser on): approx. 84,893 h (total operating time of the resonator incl. standby) Condition, scope of delivery & history: Scope of delivery includes cooling unit (chiller) and Herding dust extraction/ventilation system (Type DELTA 1200-12/9 SC, year 2004) The system was taken over from a VW plant in 2019 Professional installation, technical commissioning and inspection carried out by GIMTAS in September 2019 Sale & processing: On-site inspection possible after prior arrangement Price negotiable Dismantling and transport preferably carried out by the buyer

Condition: excellent (used), Year of construction: 2016, Technical specifications: Automatic cutting and beveling machine Pipe diameter: 50 – 330 mm Max. sheet thickness: 15 mm Cutting angle: 30 – 37.5° CNC control: PRO-Face Motor power: 30 kW CE mark Dimensions (length x width x height): approx. 3100 x 2600 x 2000 mm Machine weight: approx. 3.6 tons Ndedpfx Adowlahljcec Additional equipment: 2 roller conveyors, each 6000 mm wide Chip conveyor The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2024, functionality: fully functional, type of cooling: water, laser power: 350 W, Equipment: documentation/manual, type plate available, New AC/DC Pulse welder with CWF wire feeder, previously on display in the showroom. Ndedpfezu Tv Esx Adcsc