Condition: new, MEP band saw machine SHARK 331-1 NC 5.0 Spider All MEP models on request ! Motor power 2,2 kW band opening 340 mm belt dimensions 3650x27x0,9 mm weight 1.240 Kg speed 15 - 100 m/min. infinitely variable cutting area 0° 280 / 260x260 / 330x260 Cgjb Eochhdij D Nwmet cutting area 45° right 260 / 250x250 / 270x200 Cutting surface 45° left Cutting area 60° right 180 / 170x170 / 170x170 Cutting surface 60° left Description Hydraulic bandsaw fully automatic Miter cuts up to 60° left possible saw band length: 3650x27x0,9 Single stroke: 600 mm (programmable up to 10m) Simple touch screen operation. Saw arm made of Spheroguss - robust and stable Required floor space 3,4 m² Footprint 1900mm wide x 1800 mm deep For further technical data please refer to the attached PDF document.

Year of construction: 2020, Condition: new, Available from stock Strip dimensions: 4420 x 34 x 1.1 mm Cgsb E D Noiryf Sswmjt Cutting capacity (square): 360 x 400 mm Cutting capacity (round): 360 mm bundled cutting: 180 - 280 x 50 - 160 mm Cutting speed: 35 - 85 m/min Motor power main drive: 3.75 kW Engine power hydraulic pump: 0.75 kW Motor power coolant pump: 0.125 kW table height: 755 mm Weight: 1680 kg Dimensions W x D x H: 2400 x 2120 x 1840 mm

Condition: ready for operation (used), Year of construction: 1995, Functionality: fully functional, saw band length: 2,450 mm, saw band width: 27 mm, type of input current: three-phase, Carif band saw machine, has been checked and ready for a new lifecycle. New parts on machine: - Hydraulic pump - Drive wheel sawblade - Miter degree band Brand: Carif Type: 260 BSA Year of construction: 1995 Cgeb E D Nwowb Aypsmet Main voltage: 400V Bandsaw dimensions: 2450x27x0.9 mm Cutting speeds: 2 ( 33 / 66 m/min ) Capacity: See images Machine dimensions: ± 1200 x 700 mm Machine weight: ± 320 kg Warranty: 2 months

Condition: new, Year of construction: 2025, Optimum Geared Metal Band Saw OPTIsaw SD 200V For demanding sawing work Item number: 3300205 DESCRIPTION Quiet operation Sturdy cast iron construction Saw frame lowering continuously adjustable via hydraulic cylinder with throttle valve Microswitch for automatic limit stop Clearly legible scale for angle adjustment Standard with high-quality bi-metal saw blade Saw blade tension adjustable from the front via handwheel Ball-bearing saw blade guide Robust machine base with large wheels and handy transport handle for easy relocation of the machine Adjustable material stop for series work Safety switch for the saw blade cover Fully equipped, allowing the user to work productively immediately after commissioning TECHNICAL DATA Dimensions and Weights Length (product) approx. 1382 mm Width without material stop approx. 434 mm Width/Depth (product) approx. 533 mm Width with Material stop approx. 533 mm Height (product) approx. 1200 mm Height of lower end position approx. 790 mm Height of upper end position approx. 1200 mm Weight (net) approx. 130 kg Work table height 530 mm Electrical data Drive motor power 0.75 kW Connection voltage 230 V Mains frequency 50 Hz Coolant pump motor power 100 W Machine data Saw blade speed(s) 26 – 80 m/min Saw blade length 2360 mm Saw blade width 19 mm Saw blade thickness 0.9 mm Cutting angle 0 – 45° Cjb E D Njv Sg T Newmjgt Feed continuously adjustable Saw frame lift manually Cutting ranges Cutting range 0° round (solid material) 180 mm Cutting range 0° square (solid material) 180mm Cutting range 0° rectangular vertical (solid material) 180 x 240 / 50 x 300mm Cutting range +45° round (solid material) 110mm Cutting range +45° square (solid material) 150mm Cutting range +45° rectangular vertical (solid material) 110 x 170mm SCOPE OF DELIVERY Material stop Bi-metal saw blade Machine base

Condition: excellent (used), Year of construction: 1998, Functionality: fully functional, BEMATO Bland Saw Model : UE-712A Made in Taiwan Year : 1998 Capacity 90° : ⌀ 180mm . □ 165X280 mm . ▮65X300 mm Cgsb E D Nwewg Tdcjmet Capacity 45°: ⌀110 mm . □180X110 mm Blade Motor : 1HP Weigth : 145 kg In exellent condition

Condition: used, Year of construction: 2000, saw blade diameter 350 mm dimensions of saw-blade 350 x 32 x 2,5 mm Cgjb E Dov Rrruo Nwmjt cutting diameter 115 mm stroke 100 mm capacity 90 degrees: square 95 mm capacity 90 degrees: flat 180 x 95 mm capacity 45 degrees: round rechts & links 110 mm capacity 45 degrees: square rechts & links 95 mm capacity 45 degrees: flat rechts & links 125 x 95 mm capacity 60 degrees: round 90 mm capacity 60 degrees: square 80 mm capacity 60 degrees: flat 90 x 95 mm cutting speed 15 / 30 / 45 / 90 m/min total power requirement 2,6 kW weight of the machine ca. 375 kg dimensions of the machine ca. 1000 x 950 x 1800 mm -The powerful, 2-stage gear was specially designed for cuts in solid material designed -The user has a total of 4 blade speeds for optimal adjustment the material available -The large bearing rotary table with internal table clamping and Precision stops at 0/45/60° ensure quick adjustability miter cuts -The vice with quick clamping (optional is a pneumatic one Vise = MA, available) is with screwed vise jaws Mistake. With their ribbing, these ensure optimal hold of the workpiece -Underframe with lockable door, chip drawer and removable Coolant pan with electric coolant pump -Chip removal brush

Condition: new, BMBS 300 x 320 CNC-G Fully automatic, CNC-controlled swing frame metal band saw for miter cuts up to +60°. Description -Fully automatic, CNC-controlled swing frame metal band saw for miter cuts up to +60°. -Hydraulically controlled system for both vices and the working steps of the saw arm -Ball bearing mounted turntable -Frequency converter as standard for stepless adjustment of -saw band speed from 20 - 100 m/min -BRP - Saw band monitoring -The jaws of the two vices are equipped with long-stroke hydraulic cylinders as standard, thus eliminating the need for presetting to the material cross-section to be sawn -Quality Made in Europe Technical data Cob E D Nwocgz Suomegt Electrical connection 3 x 400 V / 50 Hz Motor power 2,4 kW Speed levels 2 saw band speed 20 - 100 m/min Saw band dimensions 3660 x 27 x 0,9 mm dimensions (L x W/D x H) approx. 2240 x 2710 x 2050 mm Table height material feed 800 mm weight approx. 800 kg Residual workpiece length min. CNC operation 115+20 mm cutting range 0° round profile 300 mm cutting range 0° round full 180 mm Cutting range 0° square material lying 320 x 300 mm Cutting range -45° round profile 300 mm Cutting range -45° round full 110 mm Cutting range -45° square material lying 290 x 300 mm Cutting range -60° round profile 200 mm Cutting range -60° round full 80 mm Cutting range -60° square material lying 190 x 190 mm Cutting range bundle round profile 320 x 160 mm

Condition: new, Year of construction: 2025, Available from stock! Speed 17/34 rpm. For saw blades up to 350 mm in diameter. With pole-changing three-phase motor, 1.4/1.9 kW, Stationary base frame with built-in coolant system and chip drawer Cutting range: Flat 90° 170 x 100 mm Flat 45° 120 x 100 mm Ceb E Dsllvpwo Nwmsgt Flat 30° 85 x 100 mm (right side only) Square 90° 100 mm Square 45° 95 mm Square 30° 85 mm (right side only) Round 90° 120 mm Round 45° 120 mm Round 30° 100 mm (right side only) Technical specifications: Length 895 mm Width 665 mm Height 1750 mm Weight 300 kg Support height 900 mm available as an option Available: Roller conveyors and length measuring devices (the roller conveyor with measuring device shown is available from stock) We recommend our coolant concentrate, which has been proven effective for decades on Eisele saws, our micro-spray oil (for machines with micro-spray devices), as well as high-quality circular saw blades and band saw blades for your specific needs. Contact us without obligation!

Condition: ready for operation (used), Year of construction: 1978, Maximum cutting width (throat) approx. 780 mm Parts height maximum approx. 500 mm stroke length: 140 mm feed regulation: by hand cutting speed: 15 - 4000 m/min Cgeb E Dsgu N Tne Nwmjt Painting: grey weight: approx. 2500 kg dimensions: 1200 x 2000 x 2600 mm swivelling range table + - 40 Accessories: On request

Condition: good (used), Automatic Circular Saw KALTENBACH Ø 370 mm Blades diameter: Ø 370 mm Maxi cutting height in round: 115 mm Maxi cutting height in flat: 120 mm 2 speed rotation motor Graduated circular tray Ø 590 mm Swivel +/- 45° Hydraulic clamping of the workpiece Cob E D Nwourtt Ssmogt Graduated stop length: 2000 mm Machine used only for stainless steel cutting Voltage: 380 V Length with fixed feed: 3000 mm Depth: 1400 mm Height: 2000 mm Weight: approx 900 kg

Condition: new, MEP SHARK 230-1 NC HS 5.0 Two-column metal band saw Item number SH230-1NCHS motor power 2,2kW band opening 235 mm Cgsb E Dechhfus Nwmet band dimensions 2950x27x0,9 mm weight 1.000 kg speed 15 - 100 m/min. infinitely variable cutting surface 0° 230 / 230x230 cutting surface 45° right cutting surface 45° left cutting surface 60° right cutting surface 60° left Description: SHARK 230-1 NC 5.0, electro-hydraulic twin-column fully automatic bandsaw with semi-automatic and fully automatic mode. Max. remnant length 70 mm. Bundle cuts 230 x 230 mm. Numerically controlled sawing machine with the new MEP 50- Windows based control. Material feed with stepper motor via ball screw mounted on opposing ball bearings. Single stroke 500 mm - repeatable to saw any length. Easy programming - enter cutting length and number of pieces and press "START". Electronic belt tension control. Automatic monitoring of cutting load by servo valve mounted directly on the cylinder. Rotation control of the band with immediate stop in case of a blocked saw band.

Condition: excellent (used), Year of construction: 2020, Available from stock! Column-guided band saw with semi-automatic sawing process including: Clamping the workpiece, sawing, and raising it to the set height after the cut 90° round 335mm, flat 500x335mm Cutting speed: 15-150m/min AC frequency-controlled drive, continuously adjustable at the control panel Cgjbjwcxl Dj E D Nwmet Incl.: Hydraulic bundle clamping device Micro-spray device Laser light Material support table on the infeed side with lifting roller

Condition: good (used), Band Saw MEBA Cgjb E D Njvzrh Rswmjt Blades dimensions: L 4270 mm x H 41 mm x Thickness 1,5 mm Maxi square cutting capacity: Ø 440 mm Flat cutting capacity: 700 x 300 mm Jaws width: 380 mm Jaws height: 300 mm Removable jaws at +/- 45° Auto blade descent with hydraulic advance Blade speed adjustment: mechanical variator Delivered with 2 feed tables Lubricant pump Voltage: 380 V Length: 2700 mm Width: 1300 mm Height in closed position: 1500 mm Weight: approx 1,2 T

Condition: new, MEP SHARK 350 NC HS 5.0 Fully automatic two-column metal band saw Cgob E D Nwji Hmcdsmst Item number MEP SHARK 350 NC HS 5.0 Motor power 4,0kW Bench opening 355 mm band dimensions 4640x34x1,1 mm weight 2800 Kg speed 15 - 115 m/min. infinitely variable cutting surface 0° 350 / 350x350 mm cutting surface 45° right cutting surface 45° left cutting surface 60° right cutting surface 60° left Description: Automatic hydraulic band saw machine in two-column design for 0° cuts on solid material and profiles made of steel, stainless steel and steel alloys up to a maximum of 350x350 mm. Numerically controlled band saw machine which can also be operated semi-automatically, with the new MEP 50 Windows 2 "CE" based control system, specially developed by MEP for automatic machines. The standard equipment includes: Driven chip conveyor, installable on the right or left side of the machine. Clamping pressure regulation of the vices. Feeder with vertical rollers for lateral material support. Clamping pressure regulation. 100 programs can be stored. The machine is available with 34 or 41 belt - without extra charge.

Condition: new, Year of construction: 2025, Available from stock! Csb E D Nwowcwggomogt Semi-automatic band saw with double-sided miter adjustment from 90° to 30°, continuously adjustable to 0.5° accuracy according to the scale. Includes the optional micro-spray device! Hydraulic raising/lowering of the saw frame Semi-automatic sawing process Hydraulic material clamping / short-stroke cylinder Rapid lowering to the top of the material 30° left Ø 130 or 120x120 45° left Ø 200 or 180x180 90° Ø 260 or 300x260 45° right Ø 200 or 180x180 30° right Ø 130 or 120x120 Remnant length 25mm

Condition: good (used), Alternativ Saw KASTO PSB 280 U Blades dimensions: 450 mm x 40 mm x thickness 2 mm Cutting capacity in the round: 280 mm Square cutting capacity: 240 x 240 mm Rectangular cutting capacity: 280 x 160 mm Cutting capacity at 45°: 170 mm Automatic descent 2 speeds rotation Swivel jaws from 0 to 45° Cgsb E D Nwovzrg Hemot Jaws length : 350 mm x Height 150 mm Maxi jaws opening: 310 mm Lubricant pump Voltage: 380 V Dimensions (L x W x H): 1800 x 800 x 1300 mm Weight: approx 1 T

Condition: new, Motor power 1,1/2,2 kW belt opening 130 mm belt dimensions 350x32x2,5 weight 220 kg Speed 30/60 1/min. Cutting surface 0° 115 / 100 / 130x80 Cutting surface 45° right 100 / 85 / 90x80 Cutting surface 45° left 75 / 75 / 90x65 Cutting surface 60° right Cutting surface 60° left Description Manual crosscut saw for miter cuts from 45° right to 45° left, with high sawing power. Construction in sturdy cast iron, practical and safe for every cut. FALCON 352 is available in bench version or on stand (accessories). The machine is equipped with a two-speed - three-phase motor. On request, the machine is supplied with pneumatic vice (FALCON 352 MA, when the head is lowered, the vice closes automatically) This version is always supplied with stand. Basic equipment: clutch adjustable from the outside Blocking device with vice Cgeb E Decgrkyj Nwmst Sliding on prismatic guide with adjustable bar Fixed clamping of the vice with axial adjustment for clamping the workpiece in the immediate vicinity of the cutting line. Adjustable fixing of the degasser, made entirely of steel. Electric 48 V coolant pump for cooling and lubrication of the saw blade. Double spring for the return of the to fix the loading platform. The machine can be lifted. Endless worm shaft mounted on pair of bearings. Saw blade holding shaft mounted on off-center punch. 2 speeds 30 and 60 rpm. Vise opening 130 mm Machine is supplied without saw blade. Electrical equipment: Electrical control panel marked cable connections main safety switch provided for padlock Emergency stop device Phase failure protection Speed changeover switch Thermal magnetic protection Undervoltage release Motor with IP 54 protection Low voltage system 24 Volt Electric coolant pump 48 V Motor 1,1/2,2 kW - 400 Volt For further technical data please refer to the attached PDF document.

Year of construction: 2011, Condition: used, Vertical Semi-Automatic Chainsaw EISMO-IMET type WS 370 SA Year of construction: 2011 Blades dimension: Ø 370 mm Cutting capacity: Straight cut Ø 120 /180 x 100/100 x 100 mm Bevel cut: 45° right - 45° left - 60° right Csb E D Njv Dkyqjwmegt Pneumatic vise Adjustable forward/downward Lubricant pump Voltage: 380 V Width: 800 mm Depth: 1200 mm Total height: 2000 mm Weight: approx 500 kg

Condition: new, ELMAG metal circular saw MKS 315 RLSS-N- SUPER-SET-ACTION SUPER-SET-ACTION - MKS RLSS-N standard equipment - Universal or sheet steel base - Material stand for circular metal saws - Quality saw blade HSS/DMo5 - Coolant concentrate 1:10, 5 liters Standard equipment - MKS RLSS-N metal circular sawing machine - Material support with roller - Bar stop with material stop - WSS quick angle clamp/angle scale - Adjustable cutting depth stop - DSS double quick-clamping vice - Quick clamping lever Cjb E Djt Hkbpo Nwmjgt - Adjustable clamping jaw(s) - High-performance drive - Gearbox with permanent oil bath lubrication - Cooling system with diaphragm pump - ERGO operating lever with reset - Permanent safety switch on the handle - Self-closing saw blade guard - Emergency stop/zero voltage release - Tool/Operating instructions/CE ADVANTAGES High accuracy for series cutting - with bar stop and material stop Quick miter adjustment with a lever handle - with quick angle clamp and 45-0-45° angle scale Flexible miter setting - gear head and/or vice can be swiveled Cutting depth can be precisely limited - with cutting depth stop Powerful - two-speed drive motor 40/80 rpm Smooth-running and durable - quality gearbox with oil bath for permanent lubrication Optimum cooling - coolant circulation system with diaphragm pump, dosing valve and return filter Compact - coolant tank integrated in chip tray Stable cutting guide - with ERGO operating lever Safe - self-closing saw blade guard, permanent switch, emergency stop, zero voltage release, CE-compliant TECHNICAL DATA Round tube cutting range at 0° Max. 90 mm Round tube Cutting range at 45° right mitre Max. 80 mm Square tube Cutting range at 0° Max. 80 mm Square tube Cutting range at 45° right miter Max. 70 mm Rectangular tube Cutting range at 0° Max. 115x70 mm Rectangular tube Cutting range at 45° right mitre Max. 70x70 mm Saw blade outer diameter 315 mm Saw blade inner diameter 32 mm Vice clamping width max. 120 mm Cutting angle 45-0-45 ° Speed level 1 / 2 40 / 80 rpm Motor power speed level 1 / 2 1500 / 2200 W Mains connection 400/50 V/Hz Infeed height for roller conveyors 1030 mm Length 1475 mm Width 1000 mm Height 1150 mm Weight 150 kg

Condition: new, MEP TIGER 372 CNC LR 4.0 Item number TI372CNCLR motor power 4,0 kW belt opening 190 mm belt dimensions 370x32x3 Cgob E D Nwochkyrsmst weight 1.060 Kg Speed 15-150 1/min. Cutting surface 0° 120 / 110 / 180x100 Cutting surface 45° right 115 / 100 / 120x100 Cutting surface 45° left Cutting surface 60° right Cutting surface 60° left Description Electro-mechanical vertical circular saw with semiautomatic function for the use of HSS saw blades to make precision cuts from 45° right to 60° left with multi-micro processors with two controlled axes that allow to program 80 different cutting programs, each with different cutting length and number of pieces, for the same thickness of material Basic equipment: -Saw head slides on recirculating ball linear double guides. -saw head feed with electromechanical cylinder -Rotary axis with thrust bearing -three-stage gearbox -material feeding (length 1000 mm) via recirculating ball screw with stepper motor and movable feeding vice -Vice opening 190 mm -Saw head stroke directly programmable from the control panel, for adaptation to the cutting material -Pneumatic vertical vice -Saw blade HSS DMO 5 Æ 370x32x3 for solid and profiled material -chipping brush -The machine is designed for lift truck transport incl. tools and operating instructions Electrical equipment: -control panel -80 different cutting programs programmable -control light for operational readiness -Main safety switch -console for programming and control, LCD display with auto-diagnostics -LED check indicator on the control panel to check the machine functions -Emergency stop button -Speed changeover switch -Thermomagnetic protection -Undervoltage release -Switch handle protection class IP 55 -Low voltage system 24 volts -Electric coolant device for lubrication and cooling of the saw blade (attachment of a micro-spraying device possible) -Motor 4,0 kW - 400 Volt MEP TIGER 372 CNC LR 4.0 RC with automatic miter cutting Item number TI372CNC LR 4.0 RC motor power 4,0 kW bench opening 190 mm belt dimensions 370x32x3 weight 1.060 Kg Speed 15-150 1/min. Cutting surface 0° 120 / 110 / 180x100 Cutting surface 45° right 115 / 100 / 120x100 Cutting surface 45° left Cutting surface 60° right Cutting surface 60° left Description -Automatic electromechanical vertical circular saw for the use of HSS saw blades to perform serial cuts with automatic miter adjustment between -45° to +45° on steel. -Semi-automatic cycle to perform miter cuts between -45° and +60°. -with multi-micro processors with two controlled axes that allow to program 80 different cutting programs, each with different cutting length and number of pieces, on the same material thickness. Basic equipment: -Saw head slides on recirculating ball linear double guides. -saw head feed with electromechanical cylinder -Rotary axis with thrust bearing -three-stage gearbox -material feed (length 1000 mm) via recirculating ball screw with stepping motor -movable feeding vice -vice opening 190 mm -Saw head stroke directly programmable from the control panel, for adaptation to the cutting material -Pneumatic vertical vice -Saw blade HSS DMO 5 Æ 370x32x3 for solid and profiled material -chipping brush Electrical equipment: -control panel -80 different cutting speeds

Condition: new, MEP TIGER 352 NC 5.0 [Fully automatic] Article number TI352NC motor power 3,0 kW belt opening 190 mm belt dimensions 350x32x2,5 weight 680 kg Cob E Djchhhdj Nwmsgt Speed 15 - 90 m/min. Cutting surface 0° 115 / 95 / 180x95 Cutting surface 45° right 110 / 95 / 125x95 Cutting surface 45° left Cutting surface 60° right Cutting area 60° left Description Electro-pneumatic, vertical, linearly guided automatic saw for the use of HSS saw blades to make serial cuts from 60° left to 45° right on steel. The machine also works in semi-automatic cycle. CNC automatic machine with multiprocessor and two axes controlled by MEP control, latest generation, which allows to program 1000 different cutting programs, each with different cutting length and number of pieces, for the same material thickness. FEATURES: -New centralized control panel on articulated arm to allow operators to easily reach the emergency stop switch from any working position. -NEW: Fieldbus communication system (Modbus protocol) with double microprocessor and serial port. -Display with 20 characters x 4 lines for displaying the following technical parameters: + saw band speed + number of cuts programmed and executed + saw band thickness + feed length + cutting time + ammeter + display of over 100 diagnostic messages and warnings. -NEW: Display and recording of the alarm and error messages with the possibility of displaying the incidents that have occurred. -NEW:

Condition: new, MEP COBRA 352 SX evo [Semi-automatic] Article number CB352SX motor power 1,5/2,2 kW belt opening 180 mm belt dimensions 350x32x3,4 Weight 285 Kg Speed 1700/3400 1/min. Cutting surface 0° 120 / 105 / 180x70 Cutting surface 45° right 120 / 100 / 135x60 Cutting surface 45° left Cutting surface 60° right Cutting surface 60° left Description Semi-automatic circular saw for sawing of solid and hollow aluminum materials and light alloys with electro-welded carbide tooth wheel. Basic equipment: -Machine for miter cuts from 45° right to 45° left. Cob Eechkv Ij D Nwmsgt -Alignment along the vertical gives the possibility of sawing operations with head inclined between 0° and 45° left. -* MEP represents the latest generation of controls designed for semi-automatic machines with single axis microprocessors. -CHARACTERISTICS: At the start of the cycle: - Vise closes and motor starts - Saw head lowers for cut - Motor stops - Saw head raises - Vise opens. -New - Display with 16 characters x 2 lines for displaying the following technical parameters: + number of executed cuts + cutting time + ammeter + display of over 100 diagnostic messages and warnings. -New - Display and entry of the alarm and error messages with the possibility of displaying the incidents that have occurred. Electrical equipment: -New - Low voltage control panel: membrane polyester keypad with thermoformed and highlighted push buttons and actuation control signal. -Saw blade stroke programmable directly from the control panel, to adapt to the cutting material. -Ball bearing mounted rotary table to ensure easy and accurate rotation. -Clamping system consisting of two face vices that can be freely arranged along the longitudinal axis of the parts. -Adjustable mechanical stops for quick positioning of the head in the angular positions at 0° and 45° right and left. -Swarf extractor with preparation for OPTIONAL extraction system. -Automatic saw blade lubrication system, operating only at the start of the cut. -Machine is supplied without saw blade. -Preparation for the installation of the minimal lubrication kit of the saw blade (OPTIONAL), besides the conventional standard lubrication with emulsion oil. -Tool and instruction manual with spare parts list. For further technical data, please refer to the attached PDF document. Catalog 2nd page !

Condition: new, MEP COBRA 352 NC 5.0 [Fully automatic] Article number CB352NC 5.0 motor power 2,6/3,5 kW belt opening 180 mm belt dimensions 350x32x3,4 Weight 600 Kg Speed 1700/3400 1/min. Cob E D Nwechkwhemsgt Cutting surface 0° 120 / 105 / 180x70 Cutting surface 45° right 120 / 100 / 135x60 Cutting surface 45° left Cutting surface 60° right Cutting surface 60° left Description Automatic cross-cut saw with semi-automatic function for sawing aluminium and light alloys. Mitre cuts from 45° right to 45° left and saw head can be tilted 0°-45° to the left. It is controlled by multi-microprocessors, while two NC controlled axes allow to program 1000 different cutting programs, each with a different number of pieces and length, for the same material. -New centralized control panel on an articulated arm, so that the machine can be easily operated from any working position and the emergency stop button can be pressed at any time. -Fieldbus communication system with double microprocessor and serial port. -Display with 20 characters x 4 lines for displaying the following technical parameters: Number of cuts programmed and executed, saw band thickness, feed length, cutting time, ammeter, display of over 100 diagnostic messages and warnings. -New - Display and recording of alarm and error messages with the possibility of displaying the incidents that have occurred. New - Material feed of 600 mm with cutting motor and recirculating ball screw mounted on opposite ball bearings.

Condition: new, MEP COBRA 352 MA Article number CB352MA motor power 2,2 kW belt opening 180 mm belt dimensions 350x32x3,4 weight 210 Kg Speed 1700/3400 1/min. Cutting surface 0° 120 / 105 / 180x70 Cutting surface 45° right 120 / 100 / 135x60 Cutting surface 45° left Cutting surface 60° right Cutting surface 60° left Description Manual circular saw for sawing aluminium, mitre cuts from 45° right to 45° left and saw head can be tilted 0°to 45° to the left. On the Cobra 352 MA (automatic vice) the vices close automatically when the saw head is lowered. Basic equipment: -Roller bearing mounted rotary table for fast and precise mitre adjustment. -screw lock to lock the saw head in any angular position -Automatic saw blade lubrication -Clamping system consisting of two vices -Saw head locking in the upper position -Adjustable length stop for cuts of the same length -Vice opening 180 mm Cgeb Eechku Sj D Nwmjt -incl. tools and operating instructions Electrical equipment: -control panel -marked cable connections -indicator light for operational readiness -Main safety switch -emergency stop button -speed changeover switch -thermal magnetic protection -Undervoltage release -Switch handle Protection class IP 55 -low voltage system 24 Volt -Motor 1,5/2,2 kW - 400 Volt For further technical data, please refer to the attached PDF document.

Condition: new, MEP SHARK 332-1 CCS metal band saw with semi-automatic lowering. MEP authorized dealer - please send us your inquiry! Motor power 1.5/1.8 kW Bench opening 335 mm Blade dimensions 3650 x 27 x 0.9 mm Weight 640 kg Speed 40/80 m/min. Cutting area 0° 300 / 260x260 / 330x260 Cutting area 45° right 260 / 250x250 / 270x200 Cutting area 45° left 200 / 180x180 / 200x160 Cutting area 60° right 180 / 170x170 / 170x170 Cgjb E D Nwjcgbt Rjmot Cutting area 60° left Description of the MEP sawing machine: Functioning in CCS version: After the material has been advanced and the vices have been closed, the cutting process begins. The lowering is controlled by the saw's own weight, balanced by a spring and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually raised to the required position for feeding the material. Electrical control panel (marked cable connections, operational readiness indicator light, main safety switch provided with padlock, switch or speed selector, emergency stop, thermal magnet protection, 24-volt low-voltage system) Electronic blade tension converter with on-screen display. Manual vice with quick-lock mechanism Base frame with coolant tray and chip drawer, which can be replaced with a motorized chip conveyor (accessory). Electric coolant pump for cooling and lubricating the saw blade. Chip removal brush Adjustable precision stops for making cuts of consistent length. The machine is designed for pallet truck transport. Bimetal saw blade for solid and profile material Tools and operating instructions Motor 1.5/1.8 kW 2 speeds 40/80 m/min. Vice opening 335 mm Saw blade 3650 x 27 x 0.9 Weight 640 kg See image for cutting data For further technical data, please refer to the attached PDF document.