Used Cold saws - half-automatic - saw blade diameter 0-350mm for sale (51)

Condition: excellent (used), Cross-cut saw with roller conveyor Type VMS3 430 2 speeds year of construction 1984 Bh0Cailxveu Saw blade 325/350 Ø 200 x 90 mm Cutting range approx. 550 kg Roller conveyor 4000 mm left, 6000 mm right of fence

Condition: used, Year of construction: 2003, Technical data: Max. Cutting range with saw blade ø 370: Clpazkj37E 90° round / flat / square: 120 / 180 x 100 / 100 x 100 mm 45° left round / flat / square: 105 / 130 x 100 / 100 x 100 mm 45° right round / flat / square: 120 / 130 x 100 / 100 x 100 mm 60°re round / flat / square: 110 / 90 x 100 / 90 x 90 mm Speed, infinitely variable: 13 - 73 1/min Max. Opening width - vice: 180 mm Saw blade diameter: 370 mm Motor power: 3 kW Dimensions without roller conveyor (WxDxH), approx.: 800 x 1100 x 2200 mm Dimensions roller conveyor (WxDxH(, approx.: 4200 x 580 x 900 mm Equipment: - Coolant device - Emergency stop button - Roller conveyor with digital measuring system and height-adjustable

Condition: used, Year of construction: 1998, dimensions of saw-blade 350 x Ø 40 x 3 mm cutting range 120 mm capacity 90 degrees: square 100 x 100 mm capacity 90 degrees: flat 170 x 100 mm capacity 45 degrees: round 120 mm capacity 45 degrees: square 95 x 95 mm capacity 45 degrees: flat 120 x 100 mm capacity 60 degrees: round RE 100 mm capacity 60 degrees: square RE 85 x 85 mm capacity 60 degrees: flat RE 85 x 100 mm work height max. 900 mm saw blade turning speeds 17 / 34 U/min compressed air 6.0 - 8.0 bar total power requirement 1.4 / 1.9 kW weight 340 kg range L-W-H 1010 x 765 x 2175 mm Furnishing : - semi-automatic vertical cold circular saw - pneumatic quick clamping device - Infinitely adjustable saw blade feed Bo2Sxgxx - Comfortable miter adjustment - Convenient stroke adjustment of the saw unit via clamping levers - Generously sized gearboxes - with Eisele rotation compensation for a long saw blade service life - Convenient saw blade change - High productivity with the smallest footprint (less than 1 m²) - Machine base - Operation manual (PDF) Machine with factory new spare parts (installed): 1x cylinder Pneu/HydrDoppelw.D80HUB190 for saw blade lowering 1x gas spring Hub100 D23 F=800N for safety hood

Condition: good (used), Year of construction: 1999, Metal Circular Saw BEHRINGER Eisele VMS 350 PV Manufacturer: Behringer Eisele Type: VMS 350 PV Year of construction: 1999 Condition: used Machining cross section max. round at 90° 120 mm Machining cross section max. rectangular at 90° 170 x 100 mm Machining cross-section max. round at 45° 120 mm Machining cross section max. rectangle at 45° 120 x 100 mm Saw blade diameter 350 mm Saw blade width 3 mm Bore diameter 40 mm Adjustable saw blade speed 17 / 34 rpm Machine head swivels 45-90-45-30° Total motor power 1.4/1.9 kW Width 900 mm Weight: approx. 400 kg Length x width x height 1050 x 900 x 1900 mm - Semi-automatic design Bsnm3Fmesy3 - Pneumatic quick clamping devices - Infinitely adjustable hydropneumatic saw blade feed - stroke adjustment of the saw unit via clamping lever - generously dimensioned gears with EISELE rotation compensation - Convenient saw blade change - Micro spray system Scope of delivery: - 1x saw blade - Operating instructions (digital) - Minimum quantity lubrication

Condition: excellent (used), Year of construction: 1966, I sell a circular saw made in Germany. Company Eisele model vms II in good condition Dqnkml

Condition: used, Year of construction: 1997, saw blade diameter 315 mm cutting diameter 95 mm cutting capacity - round bei 90° / 95 mm cutting capacity - square 95 x 95 mm cutting capacity - round bei 45° / mm cutting capacity flat 140 x 80 mm cutting capacity - square 45° / mm saw blade speeds 33/60 p. min. Drive 1,3/1,8 kW weight of the machine ca. 300 kg dimensions of the machine ca. 700 x 1000 x 2050 mm Semiautomatic: Function as follows: 1. clambing material. 2-hand start: material sawing, 3. material ease. 4. Sawing unit goes back in starting position. Cooling equipment in the base, pneumatic high-speed tensioning arrangement workpiece, durable transmission, vertical guidance in dove tail guidance, mitre cuts of 45° left to 60° right, spare saw blade. Machine ready to be demonstrated - very good condition. Bsamijeflpo Machine dealer with own stock of 2500 m².

Condition: used, Year of construction: 1998, Functionality: fully functional, machine/vehicle number: 43003p0400, Metal Circular Saw in good condition working to see. For additional questions check out the pictures first and otherwise contact us by phone. Dqkfsx

Condition: used, Year of construction: 1984, machine/vehicle number: 0278, Mitre cold circular saw EISELE type VMS-III-S-HYD Type No. 430 Machine. No. 0278 Dpcowj Year of construction 1984 Sawing range at 90°: (round) Ø 120 mm Sawing area at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 8, 16, 33, 66 rpm. (2 gear stages + 2 motor speeds) Mitre cut 45° to the left, 90° and up to 30°(60°) to the right, infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Hydraulic material quick clamping device - Infinitely adjustable hydraulic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Convenient and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base - Central lubrication (manually operated) Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 490 kg The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: excellent (used), Metal cross-cut saw DG79 Pneumatic pressure 6.5 bar Weight approx. 175 kg With roller conveyor 3700 mm Machine ready for immediate use Cg89Vtdxqs Digital display works, movable stop must be checked

Condition: good (used), Year of construction: 2002, Metal Circular Saw Behringer Eisele VMS 300 PV Manufacturer: Behringer Eisele Type: VMS 300 PV Year of construction: 2002 Bru9Yjan Condition: used Cutting range: Straight cut: 120 x 75mm 45° miter cut: 80 x 75mm Speed: 40/80 rpm Weight. 200kg - semi-automatic version - pneumatic quick clamping devices - Infinitely adjustable hydropneumatic saw blade feed - stroke adjustment of the saw unit via clamping lever - generously dimensioned gears with EISELE rotation compensation - Convenient saw blade change Scope of delivery - Operating instructions - 1x saw blade (mounted)

Condition: used, Technical details: Saw blade diameter: 350 mm cutting range 90 degrees: round: 110 mm cutting range 90 degrees: square: 85 x 85 mm cutting range 90 degrees: flat: 180 x 85 mm cutting range 45 degrees: round: links/rechts: 105 / 110 mm cutting range 45 degrees: square: links/rechts: 85 x 85 / 85x85 mm Bshazxpyuju cutting range 45 degrees: flat: links/rechts: 130x85 / 130x85 mm hole of sawblade: 40 mm range of revolutions per minute - continous: 9 / 18 / 36 / 74 / 4step U/min rotary table: Ø 400 mm/min table swivelabel +/-: 60° rechts und 45° links ° air-pressure connection: 7 bar total power requirement: ca. 2,2 kW weight of the machine approx.: 430 kg dimensions of machine: B: 0,7 x T: 1,01 x H: 2,1 m The circular saw is an electro-hydro-pneumatic semi-automatic circular saw with which miter cuts of up to 45° inwards or 60° to the right can be made on profiles and solid materials. Vertival circular saw Solid, heavy cast construction max. opening of the vice 180mm cutting counter vertical travel of the saw head: 200mm Vice opening width max. 180mm (jaw size W:220 x H:70mm) Operation via control panel *

Year of construction: 1976, Condition: used, machine/vehicle number: 7510, a used semi-automatic cold circular saw EISELE with pneumatic material clamping and automatic feed, in good condition saw blade diameter 350mm speed 17/34rpm cutting range 90° round/square/rectangle 120/100x100/170x100mm Cutting range 45° right round/square/rectangle 120/95x95/95x100mm Cutting range 30° right round/square/rectangle 100/85x85/65x100mm Cooling device Feed roller conveyor 2000mm Lcnlp Length stop 1000mm

Condition: new, Year of construction: 2024, saw blade diameter: 350 mm, cutting capacity: 115 mm, total length: 1,100 mm, total height: 1,400 mm, total width: 600 mm, cutting speed: 80,000 mm/min, overall weight: 270 kg, warranty duration: 12 months, Semi-automatic sawing machine with automatic material clamping and cutting Product Features Semi-automatic sawing machine with automatic material clamping and cutting Adjustable and controllable cutting speed thanks to the hydro-pneumatically operated saw head Ability to select the most suitable speed for the material properties thanks to the dual-speed motor Precise angle cutting up to 45° in both directions Stroke adjustment to cutting start and end points according to the dimensions of the material to be cut Coolant tank and motor in the cabin to cool the saw and remove it quickly from the cutting surface With the special stop mechanism, once set, the pieces can be cut to the same standard length Fully cast table. Double transmission helical gear system Product features Cutting Capacity Eavspot Makismum Saw Diameter 350 mm Saw Angle 90° +/- 45° Round Material Diameter (max.) 115 mm 110 mm Square Material (max.) 100 x 100 mm 90 x 90 mm Rectangular Material (Max.) 120 x 80 mm 90 x 90 mm Technical Specifications Main Voltage 400 V Control Voltage 24 V Installed Power 5.85 kW Current 2.25 A Saw Motor 1.8 - 2.2 kW Pumping Pump 0.06 kW Air Pressure 6 kg/cm2 (240 l/min) Saw Speed 40 / 80 RPM / Min. Main Voltage 90° / +/- 45° Saw Features Saw Diameter 350 mm Saw Core Diameter 32 mm Pin Holes 2 x Diameter 11 TiN Coating Medium Hard Steel TiCn Coating High Stiffness Steel TiAIN Coating Stainless steel Dimensions Width 1100 mm Length 600 mm Height 1400 mm Net Weight 300 Kg Gross Weight 320 Kg

Condition: good (used), Year of construction: 1986, machine/vehicle number: 0783, Miter cold circular saw EISELE Type VMS-III-S-PV Type No. 430 Machine. No. 0783 Year of construction 1986 Sawing range at 90°: (round) Ø 120 mm Sawing range at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 + 34 rpm Mitre cut 45° to the left, 90° and up to 30°(60°) to the right infinitely variable Dpcow7 Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Pneumatic material quick clamping device - Infinitely adjustable pneumatic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Comfortable and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 460 kg The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: like new (used), Year of construction: 2022, operating hours: 10 h, Functionality: fully functional, Equipment: emergency stop, Incl. 2x roller belts Technical data: - Discs Ø: 305 / 355mm - Mounting hole Ø: 25.4mm - Cutting speed: 80m/sec. Car0Lpz7 - Motor power: 5,5kW - Weight: 300Kg - Dimensions: 600 x 800 x 1800mm Miter adjustment right / left 45° each

Condition: used, Year of construction: 1973, Functionality: fully functional, machine/vehicle number: V28962, saw blade diameter: 250 mm, cutting capacity: 120 mm, total length: 700 mm, total height: 1,500 mm, total width: 700 mm, overall weight: 180 kg, type of input current: three-phase, cutting diameter: 120 mm, space requirement height: 1,800 mm, space requirement length: 1,500 mm, input voltage: 380 V, space requirement width: 1,200 mm, cutting length (max.): 120 mm, working height: 900 mm, coolant pump power: 400 W, saw drive: 1,500 W, motor voltage: 380 V, power: 2.5 kW (3.40 HP), Eisele circular saw up to Ø120mm for sale; column-mounted; coolant pump; 2 speed levels; 440V connection; on wheels Dpbrev

Condition: used, Year of construction: 1987, Functionality: fully functional, saw blade diameter: 250 mm, Machine number: 2403 Saw blade diameter 250 mm Machine weight approx. 1.00 t Three-phase current: 50 Hz Operating voltage: 380 Volt Control voltage: 220 VAC Valve voltage: 24 VDC Rated current: 12 Max. Back-up fuse: 25 Bry7Vjwbmns Prepayment Transportation not included If you require further information, please contact us.

Condition: ready for operation (used), machine/vehicle number: 532-96103, Half automatic band saw with a cutting range upto 280 mm diameter. Saw length 4318 mm Cxp2Xssc

Condition: new, Year of construction: 2024, saw blade diameter: 315 mm, cutting capacity: 105 mm, total length: 1,000 mm, total height: 1,400 mm, total width: 600 mm, cutting speed: 80,000 mm/min, overall weight: 240 kg, warranty duration: 12 months, Semi-automatic sawing machine with automatic material clamping and cutting Product Features Semi-automatic sawing machine with automatic material clamping and cutting Adjustable and controllable cutting speed thanks to the hydro-pneumatically operated saw head Ability to select the most suitable speed for the material properties thanks to the dual-speed motor Precise angle cutting up to 45° in both directions Stroke adjustment to cutting start and end points according to the dimensions of the material to be cut Coolant tank and motor in the cabin to cool the saw and remove it quickly from the cutting surface With the special stop mechanism, once set, the pieces can be cut to the same standard length Safety system in accordance with CE Norms Movable housing for maximum protection against sawing Product features Cutting Capacity Makismum Saw Diameter 315 mm Saw Angle 90° +/- 45° Round Material Diameter (max.) 105 mm 90 mm Square Material (max.) 85 x 85 mm 80 x 80 mm Rectangular Material (Max.) 120 x 60 mm 90 x 60 mm Technical Specifications Main Voltage Main Voltage Control Voltage Control Voltage Installed Power Installed Power Current Current Saw Engine Saw Engine Boryagi Pump Boryagi Pump Air Pressure Air Pressure Dc2338J Saw Age Saw Age Angle Rotation Angle Rotation Saw Features Saw Diameter 315 mm Saw Core Diameter 32 mm Pin Holes 2 x Diameter 11 TiN Coating Medium Hard Steel TiCn Coating High Stiffness Steel TiAIN Coating Stainless steel Dimensions Width 1000 mm Length 600 mm Height 1400 mm Net Weight 240 Kg Gross Weight 260 Kg

Year of construction: 1969, Condition: good (used), machine/vehicle number: 1130, disk of circular saw-Ø: 315 mm cutting area at 90° round: 90 mm cutting area at 90° square: 100 x 60 mm cutting speed: 17/34 m/min engine: 380 V, 1,8/2,6 kW space needed: 1200 x 860 x 1850 mm Cxofdw7 weight: 720 kg

Condition: good (used), Year of construction: 1984, operating hours: 200 h, Functionality: fully functional, machine/vehicle number: 0296, Mitre cold circular saw EISELE type VMS III SPV Sawing area at 90° (round) Ø 120 mm Sawing area at 90° (flat) 150 x 110 mm Sawing range at 45° (round) Ø 100 mm Saw blade diameter 350 mm Saw blade speed 17 + 34 rpm Mitre cut 45° to the left, Motor power 2 and 2.6 kW Mains connection 380 Volt, 50 Hz Urx0Lqtolj Two cutting speed levels via 2 motor speeds stepless saw carriage lowering Pneumatic material clamping Coolant pump and tank in the machine base Weight approx. 500 kg The machine is in good condition ready for immediate use Accessories Half-open cladding Material roller conveyor 2000x300mm Chip remover for the saw blade 5 spare saw blades

Condition: good (used), Year of construction: 1992, Profile material : 90° flat (profile : flat 400 x 125 mm 45° flat (Profile : Flat 280 x 125 mm right + left 30° flat (profile : flat 196 x 125 mm right + left 2 cutting speeds : 20 / 40 m/min Cwasiugatq Drive power 1.5 / 2.0 kW Hydraulic clamping Saw feed, hydraulic 0 - 2000 mm/min, infinitely variable Saw blade retraction in rapid traverse .

Condition: new, Year of construction: 2024, CFM-01 MACHINE FOR CUTTING PROFILES The machine has been designed for cutting profiles used for P20 or P30 ventilation ducts and fittings. The cutting quality is very high, it does not leave any burrs after cutting. Cutting that can be made in any length thanks to the ruler adjustable from 0-1500 mm. The diamond blade used is many times longer than band saws. The machine has a system of pneumatic cylinders responsible for the movement of the disc and material pressure. Thanks to the foot pedal, it provides quick and convenient cutting of profiles. B3Urjpl

Condition: used, Year of construction: 1985, dimensions of saw-blade Ø 320-350 x 3.0 mm cutting range 120 mm capacity 90 degrees: square 90 x 90 mm capacity 90 degrees: flat 200 x 90 mm capacity 45 degrees: flat 140 x 90 mm work height max. 925 mm saw blade turning speeds 17 / 34 U/min compressed air 6.0 - 8.0 bar engine output 1400 / 2800 U/min. total power requirement 2.0 / 2.6 kW weight 470 kg range L-W-H 850 x 900 x 1800 mm Machine from a vocational school (NL) maintained condition (!!) Furnishing : - semi-automatic vertical cold circular saw Bmfvam2Ayyx - pneumatic material quick-clamping device - Infinitely adjustable saw blade feed - Convenient miter adjustment with fixed stops - Convenient stroke adjustment of the saw unit using a clamping lever - Generously sized gearboxes - with Eisele rotation compensation for long saw blade service life - Convenient saw blade change - High productivity with minimal space requirements (less than 1 m²) - Coolant device * Machine link: ?machineno=1008-9164094

Condition: new, Year of construction: 2024, saw blade diameter: 275 mm, cutting capacity: 85 mm, total length: 1,000 mm, total height: 1,400 mm, total width: 600 mm, cutting speed: 80,000 mm/min, overall weight: 250 kg, warranty duration: 12 months, Semi-automatic sawing machine with automatic material clamping and cutting Product Features Semi-automatic sawing machine with automatic material clamping and cutting Adjustable and controllable cutting speed thanks to the hydro-pneumatically operated saw head Ability to select the most suitable speed for the material properties thanks to the dual-speed motor Precise angle cutting up to 45° in both directions Stroke adjustment to cutting start and end points according to the dimensions of the material to be cut Coolant tank and motor in the cabin to cool the saw and remove it quickly from the cutting surface With the special stop mechanism, once set, the pieces can be cut to the same standard length Safety system in accordance with CE Norms Movable housing for maximum protection against sawing Product features Cutting Capacity Makismum Saw Diameter 275 mm Saw Angle 90° +/- 45° Round Material Diameter (max.) 85 mm 70 mm Square Material (max.) 70 x 70 mm 60 x 60 mm Rectangular Material (Max.) 95 x 60 mm 70 x 55 mm Technical Specifications Main Voltage 400 V Control Voltage 24 V Bhirx7V Installed Power 4.7 kW Current 1, 85 A Saw Motor 1.3 - 1.8 kW Pumping Pump 0.06 kW Air Pressure 6 kg/cm2 (240 l/min) Saw Speed 45 / 80 Rev. / Min. Angle Rotation 90° / +/- 45° Saw Features Saw Diameter 275 mm Saw Core Diameter 32 mm Pin Holes 2 x Diameter 11 TiN Coating Medium Hard Steel TiCn Coating High Stiffness Steel TiAIN Coating Stainless steel Dimensions Width 1000 mm Length 600 mm Height 1400 mm Net Weight 230 Kg Gross Weight 250 Kg