Used Band saws - horizontal - manually operated - cutting range 0-220mm for sale
7
cutting diameter 140 mm
saw band length 3.000 mm
- - - - - - - - -
Juk3cu0
Band Saw | KASTO - MH 1,8
The KASTO - MH 1,8 band saw is in good condition.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
#Tags:
4
ja
weight of the machine ca. 150 kg
Fq2b0yviu
10
cutting diameter 170 mm
saw band length 2110 mm
table height 890 mm
capacity 90 degrees: flat 140 x 200 mm
capacity 45 degrees: round 125 mm
capacity 45 degrees: flat 100 x 125 mm
capacity 60 degrees: flat 80 x 70 mm
turning speed range: 32 / 64 m/min
dimensions of saw-band 2110 x 20 x 0,9 mm
total power requirement 0,75 / 0,95 kW
weight of the machine ca. 144 kg
dimensions of the machine ca. 1250 x 650 x 1340 mm
Furnishing:
- For cutting profiles, pipes, solid iron materials
- and non-ferrou...
5
Band saw - single cut saw
Fully functional
up to approx. Ø250mm
incl. approx. 2m conveyor belt
saw band length 3700mm
incl. operating instructions
Caj2musd3t
inspection at the moment still possible under power
5
cutting diameter 220 mm
saw band length 2455 mm
table height 850 mm
cutting width 230 mm
cutting speed 35 + 70 m/min
dimensions of saw-band 2455 x 27 x 0,9 mm
90 mm
90 mm
Tzfkhf8r
90 x 100 mm
150
Impact energy 150
Air consume per blow 150 x 210
220 mm
stroke back stop 210 mm
cross-slide 230 x 185
total power requirement 1,2 kW
weight of the machine ca. 0,24 t
dimensions of the machine ca. 1,2 x 0,6 x 1,7 m
Miter cuts to 60 ° left
- cutting speed 35/70 m / min.
- Vice with rapid clamp...
4
cutting diameter:300 mm
saw band length:3900 mm
speed:12 - 72 m/min
Rear feed width:max. 400 mm
dimensions of saw-blade:3900 x 25 x 0,90 mm
drive motor:2,2 kW
Gxhacvma8
dimensions of the machine ca.:2,17 x 0,95 x 1,28 (BxTxH) m
5
OPTIsaw 131 GH - Metal band saw ideal for light sawing work. Mitre sawing from -45° to +60° via swivelling saw bow
Metal band saw with low noise operation
3 saw band speeds
Ball bearing mounted 3-point saw band guide
Three switchable saw band speeds
Quick hold of the workpiece due to quick clamping vice
Standard with high quality bi-metal saw band
Base plate and saw bow made of grey cast iron
Material stop
emergency stop impact switch, motor protection switch
Easy to read scale for angle adjust...
10
cutting diameter max. 360 mm
speed 20 - 100 m/min
Bov899ypbv
total power requirement 400 Volt
weight of the machine ca. 2 t
8
OFFER 22042
Technical data:
- manual band saw machine
- saw band dimension 2375 x 20 x 0,9 mm
Qdjlx
- 2 cutting speeds N 33 / 66 rpm
- max. clamping possibility 205 mm
- miter adjustable l + r 30 °
- cutting range - 90° round 160 mm
- square 160 mm
- flat 200 x 100 mm
- 45° left + right round 140 mm
- flat 140 x 60 mm
- drive 400 V / 1,5 / 1,8 kW
- coolant device
- stop
- Weight approx. 350 kg
- Space requirement approx. W 1100 x H 1700 x D 1550 mm
3
Hacksaw machine make BEHRINGER type KS 190 N
Machine # 11697052
Technical data:
Cutting range 90° round 190 mm
Orken
45° round 140 mm
90°/45° square 160 x 160 / 140 x 140 mm
Saw blade dimension 400 x 32 x 1,6 mm
Number of cutting speeds 2
Drive power 380 V/50 Hz
with
- cooling device
used, in good condition
5
capacity 90 degrees: round 100 mm
capacity 45 degrees: round 65,0 mm
capacity 90 degrees: flat 100 x 150 mm
capacity 45 degrees: flat 60 x 100 mm
dimensions of saw-band 1470 x 13,0 x 0,65 mm
volt 230 V
45,0 m/min
2tlanu
weight 26,0 kg
range L-W-H 700 x 320 x 420 mm
scope of delivery
- saw band
- workpiece stop
- Quick release vice
- Ergonomic handle
- Chip collector
3
cutting diameter 220 mm
saw band length 2455 mm
cutting width 230 mm
cutting speed 35 + 70 m/min
dimensions of saw-band 2455 x 27 x 0,9 mm
90 mm
90 mm
90 x 100 mm
150 mm
150 mm
Bz79vaqkgs
150 x 210 mm
220 mm
210 mm
230 x 185 mm
total power requirement 1,2 kW
weight of the machine ca. 0,24 t
dimensions of the machine ca. 1,2 x 0,6 x 1,7 m
10
cutting diameter 225 mm
saw band length 2455 mm
table height 850 mm
cutting width 245 x 150 mm
cutting speed 45/90 m/min
dimensions of saw-band 2480 x 27 x 0,9 mm
90 mm
90 mm
145 mm
Impact energy 145 mm
connected load frequency 400 Volt
total power requirement 1,5 kW
weight of the machine ca. 0,2 t
dimensions 1,43 x 0,72 x 1,7 m
- Miter cuts up to 60 ° left
-Vise with quick release device
-Band tension control
H8ghojup8
-Electr. Automatic cooling
6
cutting diameter 220 mm
saw band length 2455 mm
table height 850 mm
cutting width 230 mm
cutting speed 35 + 70 m/min
dimensions of saw-band 2455 x 27 x 0,9 mm
90 mm
C0giobre
90 mm
90 x 100 mm
150
Impact energy 150
Air consume per blow 150 x 210
220 mm
stroke back stop 210 mm
cross-slide 230 x 185
total power requirement 1,2 kW
weight of the machine ca. 240 kg
dimensions of the machine ca. 1,2 x 0,6 x 1,7 m
Miter band saw cuts to 60 ° left
- cutting speed 35/70 m / min.
- Vice with ra...
Portable mitre band saw for mitres left to 45°with manual saw cut function.
The manual metal band saw Femi-SN 105 XL-G is designed for quick single cuts in workshops and, due to its dimensions, is ideally suited for use on construction sites. The machine has a two-stage motor with overload protection, the material is clamped by a vice with prismatic guide. The saw feed is carried out manually by pulling the manual guide lever with which the machine is also switched on.
Bxkr789jmp
Another advanta...
3
cutting capacity - round Ø 150 mm
Ø 75 mm
150x125 mm
70x50 mm
125 mm
Hfdh3hezs
50 mm
speeds steplessly adjustable 25-138 m/min
total power requirement 1,8 kW
weight of the machine ca. 35 kg
cutting diameter 180 mm
capacity 90 degrees: square 180 x 180 mm
capacity 90 degrees: flat 200 x 150 mm
capacity 45 degrees: round 115 mm
capacity 45 degrees: square 110 x 110 mm
capacity 45 degrees: flat 125 x 110 mm
capacity 60 degrees: flat 70 x 70 mm
capacity 60 degrees: square 70 x 70 mm
capacity 60 degrees: round 70 mm
Beobtq9alw
turning speed range: 40 / 80 m/min
saw band length 2.130 x 20 x 0,9 mm
total power requirement 0,75 kW
weight of the machine ca. 190 kg
Furnishing:
- manual ba...
5
cutting diameter 225 mm
saw band length 2480 mm
cutting width 150 mm
table height 910 mm
G0t9itf
capacity 45 degrees: flat 160 x 160 mm
capacity 45 degrees: round 160 mm
capacity 90 degrees: flat 245 x 150 mm
capacity 90 degrees: round 225 mm
turning speed range 45 / 90 U/min
dimensions of saw-band 2480 x 27 x 0,9 mm
total power requirement 1,5 kW
dimensions of the machine ca. 1,43 x 0,72 x 1,7 m
weight of the machine ca. 0,2 t
Equipment: - For cutting profiles, pipes, solid materials made of...
9
cutting diameter 250 mm
saw band length 3150 x 27 x 0,9 mm
table height 700 mm
cutting width 250 x 320 mm
cutting speed 25 - 90 m/min
dimensions of saw-band 2480 x 27 x 0,9 mm
120 mm
120 mm
190 mm
Impact energy 190 mm
connected load frequency 400 Volt
total power requirement 1,5 kW
weight of the machine ca. 0,5 t
dimensions 0,95 x 1,16 x 1,98 m
3eti3o
Miter cuts to 60 ° left
- cutting speed 35/70 m / min.
- Vice with rapid clamping device
- Bandsaw blade guide made of hard metal
- Band ten...
7
Quiet running
Stable cast iron design
Lowering of the saw bow infinitely adjustable via hydraulic cylinder with throttle valve
Microswitch for automatic limit switch
Easily readable scale for angle adjustment
Standard with high quality bi-metal saw band
Ball bearing saw band guide
Robust machine base with large wheels and handy transport handle for easy relocation of the machine
Saw band tension adjustable at the front via hand wheel
Adjustable material stop for serial work
Completely equipped, ...
1
Portable mitre band saw for mitres left to 45°with manual saw cut function.
The manual metal band saw Femi-785 XL-G is designed for quick single cuts in workshops and, due to its dimensions, is ideally suited for use on construction sites. The machine has a two-stage motor with overload protection, the material is clamped by a vice. The saw feed is done manually by pulling the hand lever which is also used to switch on the machine. Another advantage of this machine is its large cutting range of ...
1
ZIMMER metal band saw Z125/R infinitely variable, 19 Kg, band size: 1.440x13x0,65 mm - Ideal for construction sites and for assembly - cutting dimensions 90° - 125 mm round / 125x120 mm rectangular - swivelling up to 60° left.
Bpwj97gzcr
2
Electrical voltage 400 / 440 V
Frequency 50 / 60 Hz
N° Phases 3 / 3 Ph
Power motor blade 0.75 / 0.37 Kw
Engine power Water pump 0.06 Kw
Compressed air supply (pN/NB only) Max 6 bar
Ikig8bn
Mass 240 Kg
Dimensions Dimensions a x w x c 67 x 62 x 140 cm
Dimensions Sheet 2450 (x 5) x 27 x 0.9
Speed leaf rotation:
Standard from 35 to 70 m/1'
Accessory V from 20 to 100 m/1'
10
- High stability due to the moulded saw arm
- Perfect cutting results because of the 27×0.9mm saw blade
- Equipped with CD display option (for bandsaw tension)
SPECIFICATIONS:
- CD-read display for bandsaw tension gauge
- Left 45° and right 60° adjustable
- 2 Belt speeds: 40 & 80 m/min.
Bvcjlqqjqy
- Motor: 400V / 1,4kW
- WEIGHT: 290kg
CAPACITY:
- 90°: 235 / 230 / 280x180mm (round / square / rectangle)
- 45°: 185 / 160 / 160x100mm (round / square / rectangle)
OPTIONALLY POSSIBLE:
- ASS235: Ele...
7
capacity 90 degrees: round 130 mm
capacity 90 degrees: square 127 x 127 mm
dimensions of saw-band 1140 x 13 x 0,65 mm
band speed max. 144 m/min
total power requirement 1,1 kW
weight of the machine ca. 15 kg
dimensions 500 x 300 x 400 m
Portable and removable metal band saw
Blnqpx0zwc
Special features Powerful with 1100 watts.
Including 2 saw bands, work table and integrated LED lighting.
With adjustable, variable handle. Light and handy.
For universal work in the workshop, on the construction...
6
HABUSCH BANDSAW MACHINE
TYPE CY210N
- 2 Speeds
- Mitre
- Sawing pressure hydraulically adjustable
Jwuw2u
- Quick release clamp
- Cooling system
- Automatic shutdown
- Saw blade 2080 x 27 x 0.9 mm
- Emergency stop
- Documentations
- 400V
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
4
The manual metal band saw Femi 783 XL-G is designed for quick single cuts in workshops and due to its dimensions is ideally suited for use on construction sites.
The machine has a stepless motor with overload protection, the material clamping is done via a vice with prismatic guide. The saw feed is carried out manually by pulling the manual guide lever with which the machine is also switched on.
Another advantage of this machine is its low weight of only 16kg.
Design: Portable
Saw feed: Manual
Y...
1
Standard equipment
• Fast adjustment of mitre, stepless from 90°-30°.
With indication to 0,5 accuracy on scale. The swivel is directly
above the intersection of the saw blade and the fixed vice jaw
so that there is a datum measuring point which does not
Cid9tesa
change with the mitre angle
• Powerful motor 2000W
• Manual material clamping
• Complete coolant equipment with electro-pump
• saw blade tension, monitored electronically
• Colour silvergrey/ bluegrey (RAL 7001 / RAL 7031)
• Saw blade 19...
5
Manual bandsaw machine for cuts from 0° to 60° right.
Hydraulic band tensioning, bow handle with control knob.
Combination band guide with lateral bearings.
Carbide cutting plates and upper bearing.
Manual cutting or cutting without operator, with the weight of the handle and controlled by hydraulic brakes; then the handle is manually raised to the desired position.
Manual clamp for a fast and precise locking of the piece.
Hj0bap7r
The rotation of the clamp from 0° to 60° right with locks, preci...
6
The HMB210 is the perfect universal bandsaw for any metalworker, craftsman or other company.
Type:
The machine is suitable for cutting steel, stainless steel and aluminum profiles.
Pressure gauge for band tension
Ergonomic handle
Electric coolant pump
Hydraulic lowering of the saw frame (infinitely adjustable)
Automatic limit stop
2 switchable saw speeds
with stable base
Data:
Supply voltage 400 V
Motor power 950 W
Coolant pump 45 W
Weight Approx. 150 kg
Machine dimensions approx. LxDxH 1200 x 6...
7
capacity 90 degrees: round 125 mm
capacity 90 degrees: square 125 mm
127 x 125 mm
Doigbz3wu
dimensions of saw-band 1435 x 12,7 x 0,65 mm
band speed 38 - 80 m/min
total power requirement 0,95 kW
weight of the machine ca. 18 kg
dimensions 720 x 380 x 450 m
3
HBS 275 BAND SAW
- 2 Speeds
Oxbtb
- Mitre
- Sawing pressure hydraulically adjustable
- Quick-release clamp
- Cooling system
- Automatic switch off
- Saw blade 2455 x 27 x 0.9 mm
- Emergency stop
- Documentations
- 400V
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
1
Portable mitre band saw for mitres left to 45°with manual saw cut function.
The manual metal band saw Femi-784 XL-G is designed for quick single cuts in workshops and due to its dimensions is ideally suited for use on construction sites. The machine has an electronically controlled drive motor with overload protection, the material is clamped by a vice. The saw feed is carried out manually by pulling the manual guide lever with which the machine is also switched on.
Another advantage of this mac...
1
The ZIMMER Z151/R is a portable metal band saw for the professional
professional use for steel pipes in assembly.
Technical data:
Motor power 230V / 1,5kW
Cutting speed 30 - 80 m/min.
saw band dimensions 1.735 x 13 x 0,65 mm
weight 37 kg
Bxrc7tqqjx
Order number Z151/R
Cutting data
Round material Square Rectangle
0° 150 140 150 x 140 mm
45° right 100 90 100 x 90 mm
60° right 70 65 65 x 70 mm
6
capacity 90 degrees: round 105 mm
capacity 90 degrees: square 100 mm
100 x 105
Blnqncahbz
dimensions of saw-band 1335 x 13 x 0,65 mm
band speed 30 - 80 m/min
total power requirement 0,95 kW
weight of the machine ca. 18 kg
dimensions 310 x 650 x 480 m
5
HABUSCH BANDSAW MACHINE
TYPE CY210N
- 2 Speeds
- Mitre
- Sawing pressure hydraulically adjustable
- Quick release clamp
- Cooling system
- Automatic shutdown
- Saw blade 2080 x 27 x 0.9 mm
- Emergency stop
- Documentations
- 400V
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
C7of3rr
ENSCHEDE
Portable mitre band saw for left-hand mitres up to 60°with automatic saw cut function.
The manual metal band saw Femi ABS NG120-G is designed for quick single cuts in workshops and, due to its dimensions, is ideally suited for use on construction sites. The machine has an electronically controlled drive motor with overload protection, the material is clamped by a vice with prismatic guide. The saw feed is automatic with the new push-click system in four selectable feed speeds. After sawing throu...
1
With the model ZIMMER Z125/R we offer a small and handy
metal band saw for professional use:
Infinitely variable speed regulation
Saw arm swivels up to 60° to the right
Band guide with 8 ball bearings
Very smooth running
Weight 19kg
Inclusive 1 saw band (1.440 x 13 x 0,65)
Technical data:
82rl7pnu
Motor power 230V / 1,0kW
Cutting speed 30 - 80 m/min.
Saw band dimensions 1.440 x 13 x 0,65 mm
weight 19 kg
Order number Z125/R
Cutting data
Round material Square Rectangle
0° 125 80 80 mm
45° right 12...
6
capacity 90 degrees: round 110 mm
capacity 90 degrees: square 110 mm
130 x 110
dimensions of saw-band 1440 x 13 x 0,65 mm
dimensions 350 x 690 x 520 m
band speed 30 - 80 m/min
total power requirement 1,05 kW
Jvxkn3
weight of the machine ca. 19 kg
6
KARMETAL BANDSAW MACHINE
TYPE KMT 220
- Steplessly adjustable bandsaw speed
- Mitre 60
- Sawing pressure hydraulically adjustable
- Quick release clamp
- Cooling system
- Automatic switch off
- Emergency stop
- Documentations
- 400V
CALL FOR MORE INFO
DUTCHMACH
Brn02frr3v
Metalworking machines
ENSCHEDE
Portable mitre band saw for mitres left to 45° with manual saw cut function.
The manual metal band saw Femi NG 160-G is designed for quick single cuts in workshops and, due to its dimensions, is ideally suited for use on construction sites. The machine has an electronically controlled drive motor with overload protection, the material is clamped by a vice with prismatic guide and quick adjustment. The saw feed is carried out manually by pulling the manual guide lever with which the machine is al...
1
Motor power 1,2 kW 50Hz/400V
belt opening
belt dimensions 2450 x 27 x 0,9 mm
weight 240 Kg
Speed 35 + 70 m/min.
cutting surface 0° 220 / 210 x 150 / 230 x 185 mm
Cutting surface 45° right
Cutting area 45° left 150 / 150 x 150 / 150 x 210 mm
Cutting area 60° right
Cutting area 60° left 90 / 90 x 90 / 90 x 100 mm
Description
The Zimmer Z241/R is a self-lowering saw for mitre cuts from 0° - 60° left. After the cut the machine stops by a safety limit switch. The lowering is infinitely variable via a...
9
capacity 90 degrees: round 172 mm
capacity 90 degrees: square 170 mm
170 x 170
dimensions of saw-band 2035 x 20 x 0,9 mm
dimensions 430 x 960 x 520 m
band speed 30 - 80 m/min
Bh0ndiackv
total power requirement 1,5 kW
weight of the machine ca. 38 kg
4
CAND SAW TYPE BS170G - 2 Speeds - Mitre - Sawing pressure hydraulically adjustable - Quick-clamp - Cooling - Automatic stop - Saw blade 2085 x 20 x 0,9 mm - Emergency stop - Documentation - 400V Price excl. VAT 1250,- Price incl. VAT 1512,50 BELFOR MORE INFO DUTCHMACH Metalworking machines ENSCHEDE
Brnzlzgtlw
1
Motor power 230V / 2,35 kW
belt opening 230 mm
belt dimensions 2085 x 20 x0,9 mm
weight 195 kg
Nk0xx
Speed 30 - 75 m/min.
Cutting area 0° 185 / 150 x 150 / 220 x 150 mm
Cutting area 45° right 110 / 100 x 100 / 110 x 90 mm
Cutting area 45° left
Cutting area 60° right 70 / 70 x 70 / 70x70 mm
Cutting surface 60° left
Description
Metal band saw with infinitely variable electronic speed regulation and automatic lowering.
Selector switch for hydraulically controlled or manual band arm lowering.
S...
6
capacity 90 degrees: round 130 mm
capacity 90 degrees: square 130 mm
130 x 125
dimensions of saw-band 1440 x 13 x 0,65 mm
dimensions 350 x 690 x 520 m
Vujwlmz9
band speed 30 - 80 m/min
total power requirement 1,2 kW
weight of the machine ca. 19 kg
5
HBS 210 BAND SAW
- 2 Speeds
- Mitre
- Sawing pressure hydraulically adjustable
- Quick release clamp
- Cooling system
- Automatic switch off
- Saw blade 2110 x 20 x 0.9 mm
- Emergency stop
- Documentations
- 400V
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
Kjiyxt02
ENSCHEDE
9