Used Hacksaw machines & power hacksaws for sale (18)

Condition: used, Year of construction: 2009, Circular saw KASTOflex F in good condition, documentation included. Can be tested in Kaunas. Specification Belraowfd Icjkpijwl Model: Kastoflex F Year: 2009 Weight: 2700 kg Power: 13 kW Dimensions: length 4800 x height 2225 x width 2580 Automatic feeding, dumping Sawn conveyor Corner cutting Pressure CNC controller Cutting at an angle of 90 (round, square, flat) 150 / 140 x 140 / 200 x 100 mm Cutting at an angle of 45 (round, square, flat) 145 / 120 x 120 / 160 x 80 mm Cutting at an angle of 60 (round, square, flat) 115 / 100 x 100 / 120 x 60 Disc diameter (Ø 350 mm opt.) Ø 400 to 450 mm If If you have more questions, we will be happy to answer them.

Condition: reconditioned (used), Year of construction: 2010, operating hours: 480 h, Functionality: fully functional, machine/vehicle number: P00479, saw blade length: 3,300 mm, cutting capacity: 260 mm, total height: 1,380 mm, total length: 3,050 mm, total width: 1,450 mm, cutting speed: 120 mm/min, cutting range round at 45°: 260 mm, cutting range round at 90°: 260 mm, cutting length (max.): 6,000 mm, stroke distance: 500 mm, outer dimension length: 3,050 mm, outer dimension width: 1,450 mm, overall weight: 1,170 kg, oil tank capacity: 40 l, We offer for sale a fully automatic band saw FMB Jupiter, year 2010, fully functional, overhauled and ready for use. It is a reliable and robust machine, designed to perform precise and repetitive cuts without operator intervention, thanks to the fully automatic cycle. Ideal machine for intensive processing and serial cuts on tubes, profiles and solids. To ensure immediate use and without further investments, the machine is supplied complete with: Loading and unloading rollers, to facilitate the positioning and movement of the material Three new blades for cutting metal, ready to be assembled and used Original and CE certified use and maintenance manual, to guarantee compliance with European regulations 🔹 MAIN FEATURES The FMB Jupiter is an automatic band saw with a completely electronically managed work cycle. After setting the parameters, the machine performs the cut in total autonomy, ensuring high productivity and repeatability. Cutting capacity: At 0°: Ø 260 mm (round) | 260x310 mm (rectangle) At 45°: Ø 260 mm (round) | 120x290 mm (rectangle) At 60°: Ø 180 mm (round) | 90x190 mm (rectangle) Fully automated movement: once the material has been loaded, the machine performs the cut, advances automatically and repeats the process until the set series is completed Dynamometric tensioning of the belt: always guarantees the correct tension of the blade for optimal performance and long tool life Electronic speed variator (VHZ): allows you to adapt the cutting speed to the type of material, optimizing the performance and life of the blade Advanced hydraulic system, which manages the lowering of the cutting arc with precision and fluidity MODIFICATIONS AND ADDITIONAL IMPROVEMENTS To further improve the versatility of the machine, the following technical modifications have been made: Adjustment of the clamp pressure, essential for cutting thin-walled pipes and profiles, avoiding crushing and deformation Support for cutting in bundles, ideal for working multiple pieces at the same time, increasing productivity Bwolrajwb Ulkokpiel PRICE AND TERMS OF SALE Price: € [9500] (VAT excluded) Available for viewing and testing at our office POSSIBILITY OF DEFERRED PAYMENT WITH RI.BA (ITALY) ✔ Invoicable with regular documentation

Condition: like new (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 051888, Used automatic disc cut-off saw Brand: Pedrazzoli Model: SB 350/45 AP Registration number: 051888 Year: 2004 Head block rotation mechanism for angled cuts up to 45° to the left with locking lever. Pneumatic and anti-burr removable vice. Pneumatic cylinder for head movement, with brake for speed regulation. Transmission with double extensible pulley for variable speed from 15 to 90 m/s. Tilting head on adjustable self-lubricating bushings. 600 mm pitch feeder controlled by pneumatic cylinder. Repeat up to a maximum of 9 steps, to obtain a total stroke of 5400 mm. Maximum feeder clamp opening 160 mm. Bwjlrakporfw Ikoijl Programmable piece counter. Minimum final cut waste of 160 mm. Feeder speed regulating valve. Ammeter. Reverse gear. Emergency button and switch with padlock on the control panel. Blade lubrication-cooling system with electric pump. Coolant tank with removable pump for tank cleaning. Integral guarding designed for quick blade change. Blade disc Ø 350 mm. Cutting capacity: Round tubes 0°: 102mm 45° right: 102mm Square tubes 0°: 85mm 45° right: 90mm Rectangular tubes 0°: 158 x 85mm 45° right: 120 x 85mm Features: Three-phase 380V Dimensions: 1300 x 1350 x 1600 mm Work station height: 950 mm Weight: 420 kg

Condition: used, Year of construction: 1992, cutting diameter 200 mm band length 350 mm cutting lenght max. 600 mm Bwelrjtqqrmjakpijl cutting range - square - 180 x 180 mm stroke speeds 52 - 66 - 81 Hübe/min stroke speeds 104 - 132 - 162 Hübe/min dimensions of saw-blade 350 x 35 x 2,0 mm total power requirement 2,5 kW weight of the machine ca. 500 kg dimensions of machine L x W x H 1,50 x 1,50 x 1,00 m Accessories: roller track (length 2600 mm x width 300 mm), electr. length stop for cutting length up to 600 mm, 4 new saw blades, coolant

Condition: good (used), Functionality: fully functional, Pedrazzoli disc saw, working, 300 mm disc diameter, angled cutting capacity Bwolraev S I S Tskpiol

Condition: good (used), Year of construction: 2005, Functionality: fully functional, Semi-automatic glass cutting machine with mechanical measuring device. Bwslraketqlpnepisl

Condition: used, Year of construction: 1996, Technical details: weight of the machine ca.: 1750 kg sawing motor: 2,2 kW total power requirement: 5 kW cutting speed: 17 - 90 m/min cutting diameter: 320 mm cutting range max.: 320 x 320 mm saw band length: 4.930 x 34 x 1,1 mm feed length: max 9x 600 mm dimensions of the machine ca.: 2,6 x 2,4 x 1,40 m Bandsaw automatic, straight cut, min. cutting diameter 10mm, Bolrovpt Eysakpiswl min. cutting length 6mm, min. offcut 15mm (automatic 80mm), max. weight of material 400kg/m, coolant box 60l, pump 16l/min, clamping pressure 20-60bar, dimensions: chipconveyor 2.400x 950mm roller track 2.200 x 950mm, 5pcs. saws (new) 4.930 x 34 x 1,1mm operating manual, *

Condition: used, Year of construction: 1988, 370 mm rund Bwjlrakjupmwrspiel ja möglich

Year of construction: 2002, Condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED Bolrakshzbipjpiewl It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: used, Year of construction: 1986, cutting diameter Ø 340 / 340*290 mm band length 600 * 52 * 2,5 mm Bwjlsu Sby Usrakpijl cutting lenght max. x * 600 mm total power requirement 6 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,5*2,5*1,5 m

Condition: used, Year of construction: 2005, cutting diameter 220 mm Bslrakot Hxayopiowl band length 425 mm cutting lenght max. 2500 mm total power requirement 0,95 kW weight of the machine ca. 219 kg dimensions of the machine ca. m

Condition: excellent (used), I sell a massive band saw for cutting metal in bdb condition. Bwslrakpou Udrieijl

Condition: good (used), Functionality: fully functional, cutting range round at 90°: 360 mm, Heavy-duty bow saw semiautomatic Bslrsvi Izceakpiewl

Condition: used, max. diameter: 400 Belrakjih N Shepiewl

Condition: used, Year of construction: 1987, Hydr. hacksaw, metal saw, lifting saw KASTO Unfortunately there is no type plate available, the data is from a comparable saw Type PSB WBS 210 / 230 Year of manufacture in the 80s Sawing area - round Ø 250 mm Bwslsq R Riijrakpiol Sawing area - square 225 x 225 mm Sawing area - rectangle 260 x 100 mm Cutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. Saw blade length 400 mm Motor power 1.4 and 1.8 kW pole-changing Mains connection 380 Volt, 50 Hz - only for 90° cuts, no mitre adjustment - Saw motor with 2 speeds and 3 V-belt speeds - Hydraulic saw arm feed - Hydraulic cutting pressure adjustment via throttle valve - Rapid traverse for lowering saw bow - manually height-adjustable material support table with mm scale via handwheel - Manual material clamping - Coolant device in the machine base Space requirement L x W x H 1500 x 700 x 1550 mm Weight approx. 590 kg

Condition: used, Year of construction: 1977, cutting diameter:250 mm band length:450 mm cutting speed:50/70/100/135 Hübe/min range L-W-H:2,6 x 1,8 x 1,1 mm total power requirement:3,8 kW weight of the machine ca.:1,2 t Bwslrakscxxw Uepiol

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 28351, in excellent condition, plug and cut Bwjlrjvlwamjakpisl

Condition: not inspected (used), Year of construction: 2018, Functionality: unexamined, overall weight: 1,920 kg, Fabryka Elementów Złącznych S.A. located at 14 Fabryczna Street 41-100 Siemianowice Śląskie NIP: 643 000 00 23 REGON: 000028346 KRS 0000097998 has for sale the machines specified below. Deadline for submission of offers until 22.11.2024r. Offers should be sent to the e-mail address. Machines can be viewed by appointment by phone . Bolrju Hga Njakpiewl "Angle saw works together with automatic feeder of work material model LM 600 with a weight of 1.38 t and year of manufacture 2018. As of the date of inspection, the device stored in the premises of the Company, not used since 2019. Unit of equipment separated from each other. No way to check the correct operation as well as no way to verify the completeness of the device. Accepted statement that the device is complete and was not loaded with continuous operation until delivered to the Company. Non-operational device in good technical condition, however, requiring technical inspection and maintenance before restarting. The degree of technical wear was assumed at the level of 20% mainly due to the length and location of storage, which in the long term may lead to the occurrence of failure of the control system (electronics) and superficial corrosion of sensitive elements of the device. The degree of functional wear was assumed at 10%, resulting from the inability to verify the completeness of the device - here the risk of missing elements was determined at 10%. The degree of economic/environmental wear is mainly due in the case to the reference to the new device in the manufacturer's warranty costs, the cost of training and installation of the device included in the manufacturer's/distributor's selling offer price, as well as the general situation prevailing in the market for similar technical devices. Here, the level of economic/environmental consumption was assumed at 50% corresponding respectively to: 30% of the cost of the warranty, 10% of the cost of installation and training, and 10% of the general market level for this type of equipment and the resulting potential reduction in the selling price (supply over demand).