Used other metal cutting saws for sale (97)

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Minor Type: 3/67 Machine Type: Metal Circular Saw Electrical Data Operating Voltage: 380 V Frequency: 50 Hz Saw Unit Saw Blade Diameter: approx. 200 mm MACHINE DETAILS Dimensions Gkjdpfxo Adzive Agled Length: 1,000 mm Width: 700 mm Height: 1,600 mm Weight Weight: 200 kg

Year of construction: 2020, condition: ready for operation (used), Metal Band Saw manufactured in 2020. This BOMAR Extend 800.620 ANC 2500 features a hydraulic bundle clamping system and a mist lubrication system for efficient operation. It includes a laser alignment line and adjustable vise clamping pressure for precision cutting. The machine comes with selected accessories such as material stop systems and height-adjustable roller conveyors. If you are looking to get high-quality sawing capabilities, consider the BOMAR Extend 800.620 ANC 2500 machine we have for sale. Contact us for further details. Gksdpfxs Ai D Tfs Agljd • Saw blade deviation monitoring • Hydraulic bundle clamping system • Micronizer – mist lubrication system (24V unit) • Laser Liner – laser alignment line • Adjustable vise clamping pressure • Hydraulic saw blade tensioning • Version with 54 mm saw blade • Version with 5.5 kW drive motor • Digital display for saw arm descent speed (feed rate) • Condition: Very good; used for about 6 months Additional equipment • Material stop system • Modification of the vise and top clamp at the machine’s exit side • Increased jaw height (500 mm) • Roller conveyors: • Infeed roller conveyors (X850), height-adjustable 740–840 mm, non-driven, 8 m long • Outfeed roller conveyors (X850), height-adjustable 740–840 mm, non-driven, 6 m long

Condition: used, Westphal Mechanik C7x Commutator Slot Processing Center Machine No. M64127 Year of manufacture: The commutator slot processing center has four processing steps. The following components are processed in these steps: - Contact slot saw - Insulation slot saw - Deburring tool - Brush The Stäubli TS 80 robot with SP1 control has two grippers that transfer the commutator to the individual stations. Software data: Marking Builder2 (2D) Marking Builder2 (3D) Logo designer Power supply: 3/N/PE AC 400/230 V 50 Hz Control voltage: 24 VDC More images can be found via this link. Further technical data will follow shortly. Gkedpfx Asg H Inzeglsd Complete factory closure, large selection of storage platforms, pallet racking, shelving, and paternoster lifts. High-quality industrial machines, lathes, grinding machines, and hand tools. More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, machine/vehicle number: 103521108, cutting range round steel at 45°: 200 mm, cutting range round steel at 90°: 225 mm, total length: 1,350 mm, total height: 580 mm, total width: 970 mm, cutting speed: 75 mm/min, overall weight: 195 kg, type of input current: three-phase, cutting range square steel at 45°: 170 mm, cutting range square steel at 90°: 170 mm, rotational speed (min.): 1,400 rpm, input voltage: 400 V, workpiece weight (max.): 195 kg, coolant pump power: 25 W, cutting range flat at 90° (X-axis): 225 mm, cutting range flat at 90° (Y-axis): 225 mm, input frequency: 50 Hz, input current: 5 A, For sale is a used Holzmann BS 280GPS metal bandsaw in good working condition. This machine is ideal for professional use in workshops, locksmith shops, and metalworking. The bandsaw impresses with its robust construction, precise cutting performance, and ease of operation. Technical data: Manufacturer: Holzmann Model: BS 280GPS Type: Metal bandsaw / Miter bandsaw Godpfozr Upbex Aglekd Condition: Used, fully functional Robust machine construction Precise blade guide Stable workpiece clamping Suitable for steel, stainless steel, and various metals Miter cuts possible Automatic shut-off after cutting is complete Integrated coolant system Additional data: Blade: 2450 x 27 x 0.9 mm Cutting speed: approx. 75 m/min Motor power: approx. 1.1 kW Voltage: 230 V / 50 Hz Weight: approx. 195 kg The machine can be inspected and tested on site.

Condition: used, Year of construction: 1995, total length: 22,000 mm, total width: 7,300 mm, total height: 6,700 mm, cutting range round steel at 90°: 120 mm, type of input current: three-phase, overall weight: 30,000 kg, input voltage: 380 V, cutting range square steel at 90°: 120 mm, input current: 63 A, cutting range flat at 90° (X-axis): 120 mm, space requirement height: 7,000 mm, space requirement length: 25,000 mm, space requirement width: 13,000 mm, Price reduced for a quick sale – valid until 8 November 2026 due to the upcoming relocation of the storage system. Complete KASTO automated long-material storage, handling and sawing system for steel bars, tubes, pipes and profiles. The system consists of a KASTO SSZ Vario 140 Duo automatic storage installation with material handling equipment and a KASTO PKS 140 PL circular saw. The installation is designed for efficient storage and automatic supply of long steel materials directly to the cutting process. A key advantage of the system is the very high storage density. The storage system itself, without the saw, measures approximately: 22.0 m × 7.3 m × 6.7 m Floor space required: approx. 160.6 m² At the same time, the system offers a total of: 526 storage locations consisting of: 489 storage shelves with 275 mm depth 37 storage shelves with 565 mm depth Each storage location can accommodate material up to: 6,500 mm length The calculated total horizontal shelf area is approximately: 1,010 m² This means that more than 1,000 m² of usable long-material storage surface is concentrated within only approximately 160 m² of factory floor space. The storage structure consists of 9 double-sided material storage columns. Technical data Manufacturer: KASTO Maschinenbau GmbH & Co. KG Model: SSZ Vario 140 Duo Documentation designation: SSL Vario 140 K-Duo Year of manufacture: 1995 Storage locations: 526 Maximum material length: 6,500 mm Maximum material dimensions: Ø 140 mm or 260 × 120 mm Handling device capacity: 10 kN / approx. 1,000 kg Storage location load ratings: 5 / 10 / 15 / 25 kN Storage dimensions without saw: approx. 22.0 × 7.3 × 6.7 m Storage footprint: approx. 160.6 m² Calculated total shelf area: approx. 1,010 m² Storage configuration: 9 double-sided storage columns Electrical supply: 380 V / 50 Hz / 3-phase Power: 20.0 kW Current: 63 A Weight of bridge handling unit according to nameplate: approx. 4,700 kg Integrated / associated sawing machine: KASTO PKS 140 PL circular saw The system is particularly suitable for steel service centres, steel distributors, metalworking companies, machine builders and manufacturers processing large quantities of bars, tubes and profiles. Automatic material storage and handling can significantly reduce internal transport, forklift and crane movements, material searching and preparation time before cutting. Technical documentation and installation drawings are available. Location: Poznań, Poland Godpfoz I Tm Isx Aglskd Inspection possible by prior arrangement. Exact technical condition and final scope of supply can be confirmed during inspection.

Year of construction: 2020, condition: ready for operation (used), Metal Band Saw manufactured in 2020. This Behringer HBE 411 A includes an inclined chip conveyor for efficient material handling. If you are looking to get high-quality cutting capabilities, consider the Behringer HBE 411 A machine we have for sale. Contact us for more information about this machine. Godpfx Ae Ahydtjglekd - Equipment Included: Inclined chip conveyor (Späneschrägförderer)- Base Machine Weight: 3,200.000 kg - Roller Usable Width: 700 mm - Roller Diameter: 60 mm - Load Capacity per Roller: 10 kN - Material Support Height: 900 mm- CE Marked

Condition: good (used), Sawing and Drilling Machine KALTENBACH KDX 1215 and HDM 1432 Workpiece width: 1,200 mm Workpiece height: 500 mm Gedpfx Aj Aitzwoglskd Drilling diameter: 8 - 40 mm Number of drilling spindles: 3 pcs Spindle speed: 150 - 1,100 RPM Tool changer: 15 pcs Saw blade diameter: 1,430 mm Cutting speed: 8 - 30 m/min Total power requirement: 43 kW Machine weight approx.: 20 t Space requirement approx.: m Additional information Working range Angle steel: 80 × 65 × 10 mm to 250 × 250 × 28 mm U-steel: 80 × 45 mm to 400 × 110 mm Double-T beams: 80 × 46 mm to 600 × 220 mm Wide flange beams: 100 × 100 mm to 1,008 × 302 mm Special wide flange beams / welded T-beams: up to 1,200 × 500 mm Workpiece data Workpiece width max.: 1,200 mm Workpiece height max.: 500 mm Drilling unit Number of drilling spindles: 3 (1 vertical, 2 horizontal) Drilling diameter: 8 - 40 mm Spindle speed: 150 - 1,100 RPM Drilling spindle feed: 0 - 500 mm/min Rapid traverse: 3,850 mm/min Rapid return: 8,000 mm/min Positioning speed: 15,000 mm/min Automatic tool changer: 15 tool positions (3 × 5) Clamping system Horizontal clamping force: 25,000 N Vertical clamping force: 4 × 10,000 N Sawing unit Saw blade diameter: 1,430 mm Saw blade type: HSS segmented saw blade Saw blade dimensions: 100 × 4 × 30 × 250 mm Cutting width: 9.5 mm Cutting speed: 8 - 30 m/min Saw feed: 0 - 400 mm/min Rapid return: 2,000 mm/min Drives Drilling drives: 3 × 11.0 kW Saw motor: 18.5 kW Positioning drives: 3 × 1.5 kW Hydraulic unit: 5.5 kW Hydraulic saw: 3.0 kW Vertical clamping cylinder: 1.5 kW Swiveling drive: 0.25 kW Hydraulic oil heater (option): 3.0 kW Total power Total connected power of the drilling unit: 43.0 kW Total installed power of the complete drilling and sawing unit: approx. 66 kW (incl. saw motor and auxiliary drives) Compressed air Compressed air connection: 6 - 8 bar Air consumption: 1,000 l/min Dimensions Drilling unit Dimensions (L × W × H): 6,650 × 1,300 × 3,730 mm Working height: 640 mm Weight: approx. 8,500 kg Saw Dimensions (L × W × H): 4,500 × 1,500 × 3,200 mm Working height: 640 mm Weight: approx. 10,980 kg Total weight approx. 19,500 kg (without accessories) Electrical data Operating voltage: 400 V / 50 Hz Control voltage: 24 V

Year of construction: 2014, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: Simatic Panel Touch, overall weight: 4,000 kg, total width: 1,300 mm, total height: 2,200 mm, product length (max.): 2,540 mm, Metal Band Saw manufactured in 2014. This JAESPA Classic 423 DGH features a heavy steel construction and a low-vibration grey cast iron saw band table. It includes an NC control system with a 9-inch colour touchscreen for cutting program management and automatic positioning for mitre cuts. If you are looking to get high-quality cutting capabilities, consider the JAESPA Classic 423 DGH machine we have for sale. Contact us for further details. - Saw Frame Construction: Heavy steel construction, double-mounted close to the saw band, precisely guided by a hydraulic feed cylinder- Saw Band Table: Low-vibration grey cast iron with a machined surface and T-slots- Control System: NC control with 9-inch colour touchscreen for preselection and control of cutting programs (cutting lengths, piece counts, band speed, and angular position)- Mitre Cuts: Automatic positioning of the saw frame for mitre cuts on both sides between 30° and 90°- Upper Saw Band Guide: Automatically self-adjusts to the required workpiece height- Operating Modes: "HAND" for single cuts and "AUTO" for fully automatic series production cuts- Material Transport: Motorised feed (pliers vice / Zangenspannstock)- Material Clamping: Hydraulic clamping via short-stroke cylinders on both sides of the saw band- Saw Band Drive: Infinitely variable control via a frequency-regulated electric motor- Band Tensioning: Regulated mechanically via disc springs and monitored via manometer- Saw Band Length: 4570 mm- Net Weight: Approx. 4000 kg (incl. 3000 mm roller conveyor)- Dimensions (Required Footprint): 1300 mm x 2540 mm (without roller conveyor)- Height: 2200 mm- Additional Equipment: Electrically powered chip brush, generous coolant tank with integrated chip collection container, 3000 mm roller conveyor Gksdpfx Agjzzavxoljd

Condition: good (used), Year of construction: 2001, machine/vehicle number: 2354, functionality: fully functional, fuel type: electric, Due to the upgrade of our machinery park, we are offering a precision cutting saw for thin-walled aluminum profiles, which are used to manufacture aluminum rims for bicycle wheels. The saw is used for cutting profiles to the diameter of 26, 27.5, 28, and 29-inch rims. It is in perfect working condition and has been regularly serviced by our in-house technical team at defined intervals. We have four such machines available. Gsdpfx Agjzwgpwslokd

Year of construction: 2017, condition: ready for operation (used), Metal Band Saw manufactured in 2017. This Pilous ARG 640 DCT SAF features a maximum cutting diameter of 640 mm and a cutting range of 1,100 × 550 mm at 90°. It operates with a saw band speed of 15–90 m/min and has a coolant tank capacity of 70 liters. If you are looking to get high-quality cutting capabilities, consider the Pilous ARG 640 DCT SAF machine we have for sale. Contact us for further details. - Connected Load (Power): 8.80 kW - Operating Voltage: 3 × 400 V - Mains Frequency: 50 Hz - Hydraulic Pressure Max.: 70 bar - Coolant Tank Capacity: 70 Liters - Saw Band Dimensions: 8,100 × 54 × 1.6 mm - Saw Band Speed: 15–90 m/min - Max. Cutting Diameter at 90°: 640 mm - Max. Cutting Range Rectangular at 90°: 1,100 × 550 mm - Max. Cutting Range at 45°: 710 × 550 mm - Max. Cutting Range at 60°: 375 × 550 mm - Vise Working Height: 800 mm - Machine Dimensions (L × W × H): 3,800 mm × 2,500–2,700 mm × 2,050–2,700 mm - Machine Weight: 4,200 kg Godps Ahx D Ejfx Agljkd

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1966, Wagner metal band saw - Control unit with analog counter - Band length 5,000 mm Gksdpfx Ao Adz E Roglsd - Front-mounted guide rollers - Semi-automatic tensioning device - Chip conveyor

Year of construction: 2011, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1613030303, Saw blade diameter 280 mm Saw blade speed 3,200 rpm Power supply 230/400 V, 3~, 50 Hz Power output 1.05 kW Length 650 mm, depth 750 mm, height 1,300 mm, weight 130 kg Accuracy is achieved by cutting from below Wide pivoting range of up to 0° to the right and up to 45° to the left The special pivoting mechanism with integrated turn table enables working from the front at any angle position The workpiece stop is adjustable to allow optimal use of the saw blade capacity for wide and flat profiles Manual material clamping unit (vertical) Machine is ready for operation, saw blade was sharpened Gjdpjz S Nayefx Aglskd

Year of construction: 2018, condition: ready for operation (used), Metal Band Saw manufactured in 2018. This Pilous ARG 640 DCT SAF features a cutting range of Ø 640 mm for round materials and 550 mm for square materials at 90°. It offers continuous angle setting for miter cutting from 90° to 60° left. With a robust design and a total weight of approximately 4200 kg, this machine is ideal for various cutting applications. If you are looking to get high-quality cutting capabilities, consider the Pilous ARG 640 DCT SAF machine we have for sale. Contact us for further details. Godpfe Ahx R Iex Aglokd - Total Connected Load: 8.80 kW - Main Motor: 400 V / 50 Hz, 7.5 kW - Hydraulic Motor: 400 V / 50 Hz, 0.37 kW - Cooling Pump Motor: 400 V / 50 Hz, 0.12 kW - Connected Voltage: 3 × 400 V - Mains Frequency: 50 Hz - Hydraulic Pressure Max.: 70 bar - Coolant Tank Capacity: 70 Litres - Saw Band Dimensions: 8100 × 54 × 1.6 mm - Saw Blade Angle: 5° to the vice table surface - Saw Band Speed: 15–90 m/min (infinitely variable via frequency converter) - Cutting Range at 90° Round: Ø 640 mm - Cutting Range at 90° Square: 550 mm- Cutting Range at 90° Rectangular / Flat: 1100 × 550 mm - Cutting Range at 45° Round: Ø 640 mm - Cutting Range at 45° Square: 550 mm - Cutting Range at 45° Rectangular / Flat: 710 × 550 mm - Cutting Range at 60° Round: Ø 375 mm - Cutting Range at 60° Square: 375 mm - Cutting Range at 60° Rectangular / Flat: 375 × 550 mm - Miter Cutting Range: Continuous angle setting 90°–60° left - Vice Working Height: 800 mm - Machine Dimensions (Min.): 2050 × 3800 × 2500 mm - Machine Dimensions (Max.): 2700 × 3800 × 2700 mm - Total Machine Weight: 4200 kg – 4300 kg

Year of construction: 1989, condition: used, Total motor power 6,5 Kw Saw motor 4 Kw Sawing capacity round 260 mm Sawing capacity square 260 x 260 mm Smallest cutting dia 10 mm round Smallest cutting length 6 mm Automatik material feed 600 mm (w/repetition 1800 mm) Min. remaining workpiece length 10/110 mm (manual/automatic) Stepless variable speed 15-125 mm/min Stepless variable cutting feed Hydraulic material feed Automatic feeding w/horizontal vice, hydraulic variable material clamping Clamping power: Horizontal vice 0-800 dn Feeding vice 0-800 dn Saw blade dimensions 4115 x 32 x 1,1 mm Saw blade guides - hard metal Saw blade tension - Hydraulic Saw blade cleaning - w/easy changeable brush Coolant - 60 L, pump 25 L/min Equipped with: 3000 mm in feed roller conveyor 1500 mm out feed conveyor Godpfs Aba Urox Aglekd Coolant 3 new cutting blades

Year of construction: 2007, condition: good (used), machine/vehicle number: 1380-1207, >with Siemens Sinumerik Panel Control >with chip conveyor >control panel Gsdpfx Agem Nb Rijljkd >electric cabinet >capacity through spindle 60 mm >max. piece length 340 mm

Year of construction: 2022, condition: used, Cutting capacity at 60° right round/square/rectangular: 160mm/150mm/150mm×270mm, max. miter range left/right: 60°, saw blade dimensions X/Y/Z: 4250mm/34mm/1.1mm, max. blade speed: 100m/min, max. vise opening: 450mm, saw blade motor: 2.2kW, working height: 845mm. Machine dimensions X/Y/Z: approx. 1400mm/2000mm/2180mm, weight: approx. 990kg. Including micro-spray system and roller conveyor. Documentation available. An on-site inspection is possible. Gksdpfszxhlpex Aglsd

Condition: used, Year of construction: 2011, functionality: fully functional, working width: 1,015 mm, cutting height (max.): 310 mm, cutting width (max.): 1,015 mm, FICEP KATANA K100 + K60 - TWO REFURBISHED STRUCTURAL-STEEL BAND SAWS | BUNDLE OFFER Two automatic Ficep mitre band saws of the Katana series: the K100 (year 2011, profiles up to approx. 1000 mm) and the smaller K60 (profiles up to approx. 600 mm). Both designed for economical cutting of solid material, profiles and tubes in steel and non-ferrous metals. AVAILABLE INDIVIDUALLY OR AS A PACKAGE. CONDITION & REFURBISHMENT Both machines have been overhauled and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies per machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machines reconditioned - no demonstration under power). FUNCTION & APPLICATION Automatic mitre band saws for profile processing in structural steelwork: beam, tube and flat material as well as solid material in steel, aluminium and non-ferrous metals. Motorised feed with infinitely variable cutting speed, hydraulic clamping systems, CNC-controlled mitre cuts and cutting programs. The K60 is additionally prepared for the DSTV data interface (import from CAD/CAM). Applications: steel fabrication shops, steel and semi-finished trading, industrial pre-fabrication. --- MACHINE 1: FICEP KATANA K100 (YEAR 2011) --- Horizontal CNC mitre band saw for large structural-steel cross-sections. Hydraulic blade tensioning, dual automatically pre-settable blade guidance, integrated cooling/lubrication. - Year: 2011 | Serial number: 33111 - Cutting width at 90 deg: 1015 mm | Cutting height at 90 deg: 310 mm - Min. profile size at 90 deg: 60 x 10 mm - Cutting width at +/-45 deg: 610 mm | Cutting height at +/-45 deg: 310 mm - Max. mitre angle: +/-60 deg - Saw blade: 7880 x 41 x 1.3 mm | Blade speed: 60-170 m/min - Blade motor: 9 kW | Control: Ficep CNC - Hydraulic blade tensioning, dual blade guidance (fixed/mobile side) - Synchronised cleaning brush, integrated cooling/lubrication system - Hold-downs and workpiece vices: hydraulic, independent --- MACHINE 2: FICEP KATANA K60 --- Horizontal CNC double-mitre band saw for medium cross-sections. Hydraulic horizontal and vertical clamping, minimum-quantity lubrication, Mitrol CNC with Pegaso software. - Year and serial number: on request (to be confirmed on the name plate) - Cutting range at 90 deg: 610 x 310 mm - Cutting range at 45 deg: 400 x 300 mm | at 60 deg: 250 x 250 mm - Mitre angle range: +45 / -60 deg | Min. profile height: 60 mm - Saw blade: 34 x 1.1 x 6350 mm - Blade motor: 7 kW | Control: Mitrol CNC, Pegaso software - Data interface: DSTV | Remote diagnostics via network - Hydraulic horizontal/vertical clamping, minimum-quantity lubrication (MQL) Gedpfxswd Ugtj Aglskd - Operating mode: standalone or as combined line with drill unit Machine weights and dimensions for both machines follow on request. LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further Ficep machines on request. CONTACT / INQUIRY Price on request - individually or as a bundle | Viewing by arrangement. Sale exclusively to commercial customers (B2B).

Year of construction: 1997, condition: used, Cutting speed copper/aluminum: 80m/min, structural steel/steel pipes: 65-85m/min, C45/comparable steels: 55-80m/min, C60/comparable steels: 55-65m/min, 34CrMo4: 40-60m/min, 42CrMo4: 40-55m/min, 10CrMo9-10: 30-50m/min, high-alloy steels: approx. 20-40m/min, connected load: 5kW, rated current: 16A, weight: 1.75t, an on-site inspection is possible. Gedj Adt Epjpfx Aglekd

Year of construction: 2015, condition: ready for operation (used), A MEP saw with a Kenning automation system is available. Mitering range min./max.: -45°/60°, saw blade diameter: 350mm, saw blade bore: 32mm, thickness: 2.5mm, speed: 90rpm, max. vise opening: 190mm, max. cutting capacity: 115mm. Machine dimensions X/Y/Z: approx. 2050mm/1050mm/1150mm, weight: approx. 450kg, control system: PC. Documentation available. An on-site inspection is possible. Godpfx Agszf Ncpolokd

Year of construction: 1990, condition: used, Cutting angle: 90°-45°, operating hours: approx. 4420h. Equipped with automatic material feed as well as roller conveyors on the left and right with ball-bearing rollers and storage compartments beneath the roller conveyors for short material sections. Including spare saw blades. The coolant was changed approx. 5 operating hours ago. An on-site inspection is possible. Gjdpfxjzx Ehhs Agljkd

Year of construction: 2019, condition: ready for operation (used), overall weight: 1,800 kg, total height: 2,160 mm, This BOMAR Individual 520.360 GANC was manufactured in 2019. It features an automatic operating mode with a mitre cutting range of 0° – 60°. The saw band operates at speeds between 20 – 120 m/min, accommodating a maximum material weight of 2,500 kg. Ideal for those looking to enhance their metal cutting capabilities. Contact us for more information about this machine. Additional information • Operating mode: Automatic • Mitre cutting range: 0° – 60° • Drive: 3 kW, 3x400V, 50 Hz • Saw band size: 4780 x 34 x 1.1 mm • Material loading height: 770 mm • Shortest length of rest: 220 mm • One upstroke: 750 mm • Maximum weight of material: 2500 kg • Saw band speed: 20 – 120 m/min • Disconnected, currently cannot be operated, but was fully operational prior to factory relocation. • The seller can dismantle and load the machine for transport. • Not the main company bandsaw due to bulky size relative to material processed. Godpfxex D Iwpj Agljkd Dimensions Machine Depth 3350 mm

Year of construction: 1995, condition: used, Offered for sale is an automatic horizontal bandsaw with roller conveyor. Control system: Electronic machine control system with display, keyboard and control buttons. Equipped with hydraulic workpiece clamping, material feed system, roller conveyor, safety guards and additional bandsaw blades. Inspection possible by arrangement. Gjdpfxjz N Haxo Agljkd

Year of construction: 2026, condition: new, functionality: fully functional, High-speed cutting. Precision feeding. Reliable performance. The SK MACHINERY XC70 is a high-speed automatic circular sawing machine designed for efficient and precise cutting of metal bars and profiles. With its advanced servo-controlled feeding system, high-speed cutting technology, and automatic material handling, the XC70 offers an excellent solution for companies looking to increase productivity and reduce manual operations. Its compact industrial design and competitive investment cost make it an attractive solution for small and medium-sized production facilities. KEY ADVANTAGES High-speed automatic cutting Cutting capacity up to Ø 70 mm round material Advanced servo-controlled feeding system Special gearbox design with backlash elimination High positioning accuracy Automatic three-station material loading system Contactless material feeding mechanism High-performance hydraulic system Reduced auxiliary cycle time User-friendly machine operation CUTTING PERFORMANCE The XC70 is designed for high-speed cutting of medium and low-carbon steel. According to the manufacturer's specifications, when cutting Ø 50 mm round steel into 50 mm lengths, the machine can achieve a stable cutting cycle of approximately 7 seconds. The feeding cycle time for a 50 mm cutting length is approximately 1.3 seconds. MATERIAL APPLICATIONS The machine is suitable for cutting: Gode Ai Ul Rspfx Agljkd Medium and low-carbon steel Stainless steel Copper Aluminum alloys TECHNICAL SPECIFICATIONS Parameter Specification Model XC70 (XS70) Maximum round cutting capacity Ø 70 mm Saw blade diameter 285 mm Connected power 7.5 kW Cutting speed Up to 125 RPM (45# steel) Feeding control Servo-controlled Material loading Automatic three-station system WHY SK MACHINERY? SK MACHINERY provides more than just machinery. We offer professional support throughout the entire machine lifecycle: Machine sales and technical consulting Installation and commissioning Operator training Spare parts supply Technical service and after-sales support Our goal is to provide reliable industrial cutting solutions to customers throughout Europe. CONTACT SK MACHINERY For further technical information, pricing, and availability, please contact us. SK MACHINERY – Your Partner in Industrial Cutting Solutions.

Year of construction: 2002, condition: ready for operation (used), total width: 1,100 mm, cutting speed: 375,000 mm/min, product length (max.): 700 mm, Metal Band Saw manufactured in 2002. This MÖSSNER Rekord features a cutting height of 170 mm and a roller diameter of 320 mm. It has a table size of 500 x 500 mm and offers a cutting speed ranging from 12 to 375 m/min. If you are looking to get high-quality cutting capabilities, consider the MÖSSNER Rekord metal band saw we have for sale. Contact us for further details. Godpfx Aezwu Izsglokd - Accessories/Documentation Available: Yes - Dimensions (mm): 700x1100 - Cutting Height: 170 mm - Roller Diameter: 320 mm - Table Size: 500 x 500 mm - Cutting Speed: 12 to 375 m/min - Saw Blade Length: 2460–2650 mm

Year of construction: 1996, condition: ready for operation (used), A horizontal miter saw Kaltenbach is available. Saw blade dimensions X/Y/Z: 3830mm/27mm/0.9mm, saw blade speed: 100m/min, working height: 700mm, max. cutting range round material: 305mm, max. cutting range square material: 360mm/305mm. Machine dimensions X/Y/Z: approx. 2300mm/1450mm/1650mm, weight: approx. 800kg. An inspection on site is possible. Gkedjx Dcaxopfx Agljd