Circular saws for light metal and aluminium - manually - saw blade dia. 300-369mm for sale
10
saw blade diameter 520 x Ø 50 mm
cutting diameter 200 mm
Cutting height at 45° 140 mm
hole of sawblade 50,0 mm
total power requirement 5,0 kW
Dust suction hood 100 mm
weight of the machine ca. 310 kg.
range L-W-H 1400 x 900 x 1650 mm
- Cross-cut and miter saws for cross-cut cuts
- Miter adjustment on both sides (60 ° / 45 °), with fixed stops
- Shifter cut on both sides (60 ° / 45 °), with fixed stops
- Stable cast iron construction
- Precise linear bushing guide on the tool slide
hardened a...
5
crosscut saw for aluminium with saw blade diameter 350mm
horizontal pneumatic clamp
feeding side left, swivelling of the saw unit
by 45° (right and left) and manual horizontal
swivelling by 45
With mist spraying device
The angular positioning of the saw blade is achieved by
the tilting of the support table with locking bolt for 45
(right and left) and manual clamping for the
intermediate mitres.
Pwdcre
1
saw blade diameter 350 mm
capacity 90 degrees: round 120 mm
capacity 90 degrees: square 110 mm
capacity 90 degrees: flat 200x88 mm
capacity 45 degrees: round 115 mm
Benvwlpexx
capacity 45 degrees: square 110 mm
capacity 45 degrees: square 150x80 mm
total power requirement 1,5/1,8 kW
weight of the machine ca. 0,22 t
dimensions 0,7 x 0,9 x 1,9 m
3
aluminium circular sawing machine make MEP type Cobra 350
Fabr. # 021746 LRX Year of construction 1993
Technical data:
cutting range 0° round 120 mm
cutting range 0° square 105 x 105 mm
cutting range 0° flat 180 x 70 mm
Cutting range 45° round 120/110 mm
cutting range 45° square 100 x 100 / 95 x 95 mm mm
Cutting range 45° flat 135 x 60 mm
Saw blade speeds 1700 / 3400 rpm.
Stymaw
Vise opening 180 mm
Drive power 1.5 / 2.2 kW
Weight approx. 160 kg
with
- 2 hor. pneum. Clamps
- Undercarriage
used, i...
4
Manual cold sawing machine for cutting iron and steel.
Two cutting speeds
Rotating head 45º left and right.
Worm gear reduction head bathed in SAE90 oil.
Double anti-slip clamp
Pw2lf
1
Manual sawing with left & right miter
Heavy stable base
Counterbalance spring
V315T: dual pneumatic tensioning system
V315: double manual clamping device
Pwo7v
Control: Manual
Degree-measuring system: Analog
Circular saw speed: 45/90rpm
Cutting angle: 0-45° R; 0-45° L
Cutting capacity Round: 105 mm
Circular cutting capacity Square: 85 x 85 mm
Cutting capacity flat: 120 x 60 mm
Circular saw diameter: 315 mm
7
saw blade diameter 350 x Ø 32 mm
turning speeds 1800 / 3600 U/min
capacity 90 degrees: round 120 mm
capacity 90 degrees: flat 200 x 88 mm
capacity 90 degrees: square 110 x 110 mm
capacity 45 degrees: round 115 mm
capacity 45 degrees: flat 150 x 80 mm
capacity 45 degrees: square 110 x 110 mm
hole of sawblade 32 mm
work height max. 865 mm
clamping head: max. 200 mm
total power requirement 1,5/1,8 kW
weight of the machine ca. 225 kg
range L-W-H 1100 x 920 x 1700 mm
Furnishing:
- Aluminum circula...
6
Kaltenbach TL350 circular saw for aluminium (glazing beads/ profiles).
Sktf70ej
The exact technical data can be found on the nameplate or the Kaltenbach website. The machine was used few and is like new (year of manufacture 2018).
9
saw blade diameter 350 mm
cutting diameter 110 mm
B2etrjq3rq
stroke 110 mm
turning speeds 2700 U/min
weight of the machine ca. 0,2 t
dimensions of the machine ca. 0,9 x 0,6 x 1,6 m
9
Crosscut saw Cold circular saw
Manufacturer: MEP
Type: Cobra 350
Saw blade diameter: 350 mm
Ylfuvkw
Cutting diameter: 120 mm
Cutting range at 45 degrees: flat 135 x 60 mm
Cutting range at 45 degrees: round 120 mm
Cutting range at 90 degrees: flat 180 x 70 mm
Cutting range at 90 degrees: square 105 mm
Machine weight approx. 0,6 t
Dimensions L x W x H 1600 x 800 x 1700 m
The UK-350-P is a manual table saw with simple safe operation! Double mitre cuts right and left up to 45° are possible with this machine. The mitre adjustment is done by turning the fence jaw. The UK-350-P has a compact design with clear operation. The saw cut is made manually from below into the material to be processed. The material is clamped pneumatically. Fixed guard in front of the cutting area.
Equipment
- Precision circular saw aluminium
- Two-hand safety control
- mitre adjustment left ...
8
Machine type: LMS 2 No. 7920
Year of manufacture: 1967
Operating voltage: 380V / 7,5kVA
dimensions l x w: 2100mm x 750mm
Eqnnoou
sale on commission - inspection only possible by appointment; free delivery in Austria
5
saw blade diameter 350 mm
cutting diameter 120 mm
capacity 45 degrees: flat 180 x 50 mm
capacity 45 degrees: round 116 mm
capacity 90 degrees: flat 200 x 80 mm
capacity 45 degrees: square 100 x 100 mm
capacity 90 degrees: square 105 x 105 mm
capacity 90 degrees: round 120 mm
weight of the machine ca. 266 kg
Nujlp
Furnishing:
- Aluminum circular saw with manual clamping device
- machine base
- without saw blade
7
Blade 350mm, 2,2kW, 280/min,
shipping EU ~300euro
Bvbqknxw3y
10
saw blade diameter 350 mm
cutting diameter 120 mm
turning speeds 1700/3400 U/min
dimensions of saw-blade 350 mm
capacity 45 degrees: flat 135 x 60 mm
W3svw
capacity 45 degrees: round 120 mm
capacity 90 degrees: flat 180 x 70 mm
capacity 90 degrees: square 105 mm
weight of the machine ca. 0,6 t
dimensions 1600 x 800 x 1700 m
3
Glazing bead saw / mitre saw for aluminium and PVC profiles make ELUMATEC type MGS 460
make # 20441 year of construction 1994
Bewwd032tq
Technical data:
Saw blade diameter max. 300 or 250 mm
saw blade speed 3800 rpm
Cutting range sh. Diagram
Compressed air connection 7 bar
Air consumption per working cycle 10 l/min
Power 1100 W
Power supply 380 V / 50 Hz
External dimensions approx. 600 x 600 x 1200 mm
weight approx. 60 kg
with
- spraying device
used, in good condition
6
Offer 21342
Technical data:
- Sawing machine with hand lever saw blade - feed.
- Workpiece clamping in machine vice
- Left + right mitre adjustable
- Saw blade diameter up to 315 mm
- Cutting speed N 40 - 80 rpm
- Cutting range at 90° round 110 mm
- rectangle 82 x 160 mm
- square 82 x 82 mm
Yua97w
- at 45° round 110 mm
- rectangle 80 x 120 mm
- square 82 x 82 mm
- Drive 400 V / 1,4 / 1,9 kW
- Coolant device
- Space requirement approx. W 600 x H 1600 x D 750 mm
- Weight approx. 350 kg
2
disk of circular saw-Ø: 350 mm
cutting area at 90°: 280 x 70 mm
cutting area at 45°: 160 x 70 mm
rotations of disk: 3400 rpm
engine: 380 V, 2,6 kW
space needed: 850 x 550 x 1450 mm
weight: ca. 160 kg
Bcpt7h0gyr
saw blade diameter 350 x 32 mm
capacity 90 degrees: round 120 mm
capacity 90 degrees: square 105 mm
capacity 90 degrees: flat 180 x 70 mm
capacity 45 degrees: round 120 mm links
capacity 45 degrees: round 110 mm rechts
capacity 45 degrees: square 100 mm links
capacity 45 degrees: square 95 mm rechts
capacity 45 degrees: flat 135 x 60 mm
dimensions of saw-blade 350 x 32
turning speeds 1700 / 3400 U/min
capacity 45 degrees: round 120 mm
total power requirement 1,5 / 2,2 kW
weight of the machine c...
2
The IMET manual disc saw for cutting aluminum. VELOX 350 can cut from 45 ° right to 45 ° left and inclined up to 45 ° to the vertical axis. The machine is equipped with a system of automatic stops at 0 °, 15 °,15°, 30 ° and 45 ° both to the right and to the left.With sandfloor.
Bzapgy0nrr
10
saw blade diameter 350 mm
capacity 90 degrees: round 100 mm
capacity 90 degrees: square 100 mm
capacity 90 degrees: flat 100 x 195 mm
capacity 45 degrees: round 100 mm
capacity 45 degrees: square 100 mm
0uvutt2d
capacity 45 degrees: square 100 x 135 mm
saw blade turning speeds 2800 U/min
total power requirement 1,5 kW
weight of the machine ca. 0,09 t
dimensions 0,7 x 0,7 x 1,4 m
1
1 used well preserved manual high performance cold circular saw for cutting aluminium, non-ferrous metals, plastic as well as wood
max. saw blade diameter 440 mm
speed range 3400 rpm.
Accessories / special features:
- 2 pneumatic hold-downs
- mitre left and right
- support roller table left 4000 mm and right 2000 mm long with scale
- underframe
- Saw blade
Siegfried Volz Machine Tools
Bjtnmuqn29
Rüschebrinkstr. 151-153
D - 44143 Dortmund - Wambel
7
OFFER 21290
Technical data:
Cyu22gns8
- Sawing machine with hand lever saw blade - feed
- Workpiece clamping in machine vice
- Left + right mitre adjustable
- Saw blade diameter up to 315 mm
- Cutting speed N 34 - 68 rpm
- Cutting range at 90° round 110 mm
- rectangle 82 x 160 mm
- square 82 x 82 mm
- at 45° round 110 mm
- rectangle 80 x 120 mm
- square 82 x 82 mm
- Drive 400 V / 1,4 / 1,9 kW
- Coolant device
- Dimensional stop 1000 mm
- Space requirement approx. W 600 x H 1600 x D 750 mm
-...
3
Aluminium circular saw Pressta Eisele type SCA 300 with base
Bke9dzno
10
saw blade diameter 410 mm
cutting diameter 170 mm
turning speeds 3.500 U/min
Dust suction hood 100 mm
dimensions of saw-blade 420x3,2/2,4x40 mm
total power requirement 3,0 kW
weight of the machine ca. 120 kg
dimensions of the machine ca. 1300 x 800 x 1600 mm
- Cross-cut and miter saws for cross-cut cuts
- Miter adjustment on both sides (60 ° / 45 °), with fixed stop
- Shifter cut on both sides 45 °, with fixed stop
- Stable cast iron construction
- Precise linear bushing guide on the tool sli...
5
Underfloor circular saw MEP Cobra 400 19-03-027
Delivery time: immediately
Number: 19-03-027
Machine data
Year of construction: approx. 1991
L x W x H: approx. 700 x 900 x 1100 mm
Weight: approx. 150 kg
Eqdnre2
Very good general condition
Technical specifications
Saw blade dimensions: approx. 400 x 3.6 x 40 mm
Saw blade speed: approx. 2800 rpm
equipment
-Pneumatic clamping
-Saw blade
- Miter-adjustable back stop
Further accessories on request
Price and further technical da...
2
Refurbisched Aluminium Saw TL 350 400 Volt Sawblade diameter 350 mm
Nzlid
8
1 used very good condition cold circular saw for cutting aluminium, non-ferrous metals, plastic and wood
Bybrmsd9ei
max. saw blade diameter 300 mm
mitre left up to 60
mitre right up to 45
2 speed ranges 1500 / 3000 rpm
drive power 1,3 / 1,7 kW, 400 V
dimensions L x W x H 600 x 800 x 1600 mm
weight approx. 50 kg
Accessories / special features:
- Saw blade guard
- Mitre left and right
- 2 pole drive motor
- underframe
- Saw blade
Siegfried Volz Machine Tools
Rüschebrinkstr. 151 - 153
D - 44143 Do...
1
MEP COBRA 352 MA
Article number CB352MA
motor power 2,2 kW
belt opening 180 mm
belt dimensions 350x32x3,4
weight 210 Kg
Speed 1700/3400 1/min.
Cutting surface 0° 120 / 105 / 180x70
Cutting surface 45° right 120 / 100 / 135x60
Es9z7u7
Cutting surface 45° left
Cutting surface 60° right
Cutting surface 60° left
Description
Manual circular saw for sawing aluminium, mitre cuts from 45° right to 45° left and saw head can be tilted 0°to 45° to the left. On the Cobra 352 MA (automatic vice) the vices cl...
MEP aluminium circular saw COBRA 352 MA, 2 speeds and automatically closing pneumatic vices.
For mitre cuts from 45° right to 45° left.
The COBRA 352 MA is supplied with a base frame.
When the head is lowered, the vice closes automatically.
automatically.
Some features:
- Ball bearing mounted turntable to ensure easy and
easy and accurate rotation.
- Adjustable mechanical stops for quick
positioning of the head in the angular positions at 0° and
and 45° right and left.
Bvmnfzdixk
- Adju...
9
saw blade diameter 350 mm
cutting length 430 mm
cutting diameter 135 mm
turning speeds 3.800 U/min
Dust suction hood 100 mm
dimensions of saw-blade 350 x 3,0/2,4 x 40 mm
total power requirement 3,0 kW
weight of the machine ca. 100 kg
dimensions of the machine ca. 1300 x 800 x 1600 mm
- Cross-cut and miter saws for cross-cut cuts
- Miter adjustment on both sides (60 ° / 45 °), with fixed stop
- Shift cut on one side up to 45 °, with fixed stop
- Stable cast iron construction
Mqvkuja
- Precise ...
