Used Elu Circular Saw for sale (9)

Condition: used, machine/vehicle number: 4038, functionality: fully functional, power: 2 kW (2.72 HP), input voltage: 380 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 80 mm, saw blade diameter: 330 mm, saw blade bore: 32 mm, actuation type: pneumatic, rotational speed (max.): 3,800 rpm, ELU Miter saw, model MGS 73 for aluminum and plastic profiles Saw blade 330 x 3.2 x 32 mm, Z = 96, negative tooth angle Cutting height approx. 80 mm, Miter setting right/left +/- 45°, Hfedjzbr Uzopfx Ackjl 2 pneumatic clamps, horizontal, 2 pneumatic clamps, vertical, Motor 2 kW (2.7 hp), 380 volts, 50 Hz, pneumatic feed with hydraulic feed brake, 2-hand operation: left: clamping and releasing, right: saw feed, cast table extension on the right with stop and measuring scale 0 - 3,000 mm without emergency stop switch!, without motor brake! as inspected, ex works Seevetal, Ex Works, without transport, subject to prior sale.

Condition: used, Year of construction: 1993, Technical details: saw blade diameter: 250 mm saw blade drill hole: 30 mm Cutting depth: 68 mm Cutting length: 450 mm total power requirement: 2,55 kW weight of the machine approx.: 150 kg dimensions L x W x H: 0,85 x 0,86 x 1,4 m Hsdpfxeu Nifyo Ackefl This circular saw is hand operated, equipped with a table support 400 x 860 x 22mm, relocatable, which is placed on a frame. Uses: Wood, thermosetting plastics, plaster, chipboard and other similar materials. Details of the swivel arm: Length 800mm, max. projection 580mm, swiveling 45° right/left their indication via radial scale. Sawhorse data: Feed manually (handle), tiltable 90° left their indication via radial scale, motor 380V with 2,700 rpm, protection class IP44, *

Condition: used, Year of construction: 1982, machine/vehicle number: 27563, functionality: not functional, power: 2 kW (2.72 HP), input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: three-phase, total length: 750 mm, total width: 750 mm, ELU / ELUMATEC DG 79 double miter saw – defective / for DIY enthusiasts Selling a used ELUMATEC DG 79 double miter saw. The machine is explicitly sold as defective or untested. It is sold exclusively as a DIY project, for spare parts, or for repair. For safety reasons, the machine has been taken out of service. No guarantee regarding function or operational safety. The DG 79 is an industrial double miter saw for aluminum and plastic profiles, featuring a robust machine construction and pneumatic clamps. Technical data Manufacturer: ELU / Elumatec Type: DG 79 Machine type: Double miter saw Saw blade diameter: 380 mm Speed: 2,800 rpm Motor power: 2 × 3 kW Swivel range: 0°–45° left/right Minimum cutting length: 520 mm Maximum cutting length: depending on the model, up to 3,000 mm Cutting range approx. 195 × 120 mm at 90° Pneumatic material clamps Hydropneumatic feed 400 V high voltage Compressed air connection required Hfjdpfxsy Ulvae Acksl Condition Used Sold explicitly as defective No guarantee No returns Inspection welcome Loading to be done by the buyer

Condition: good (used), Crosscut and miter saw, pull saw, crosscut saw, panel saw, crosscut and miter saw, radial saw, radial arm saw Hsdpfopcmthjx Ackjfl -Manufacturer: Elu, cross-cut and miter saw with table on solid base, mobile -Type: MGS 72 -Motor power: 0.85/1.2 kW -Speed: 1050/2100 rpm -Saw blade: Ø 305 mm -Cutting height: max.110 mm -Cutting width: max. 120 mm -Miter. 45° on both sides -Dimensions: 2100/840/H1180 mm -Total weight: 190 kg

Year of construction: 1994, condition: defective spare-parts repository (used), machine/vehicle number: 20 048 M100390 130003048, movements x/y/z: gross/klein 6500/300 mm spindle turning speed range: 5400 rpm number ob tool positions: 8 pieces carriages: x/y u. z 60/30 mm/miin spindle drive: max. 5,5 kW The machine is sold as a spare part carrier because the controller is defective. Hodpfx Acjz N T Sekefl electrical connection: 400 V kW space needed: 8600 x 2270 x 2150 mm weight: ca. 5000 kg

Condition: good (used), Year of construction: 1988, functionality: fully functional, Double mitre saw DG79 - 2 x 2 kW - 380 Volt - Year of manufacture: 1988 - 2100 / 3800 rpm - Saw blade 330 mm Ø - Cutting area at 90°: 195 x 90 mm; at 45°: 135 x 90 mm - Minimum cutting length 500 mm, maximum approx. 3300 mm - Compressed air 6-8 bar / 250 l/min - Weight: approx. 500 kg - Pneumatic clamping device Hfjdpfx Aceygm Akjkjl Transport available at extra cost! Due to the age of the used machine, warranty is excluded for commercial customers.

Condition: used, Year of construction: 1984, Technical details: x-travel: 400 mm y-travel: 100 mm z-travel: 100 mm electrics - voltage/frequency: 380/50 V/Hz Hjdpju Nc Nxjfx Acksfl total power requirement: 0,8 kW machine weight approx.: 132 kg space requirements of the machine approx.: 1,6 x 0,6 x 1,4 m This milling machine is ideally suited for window. - long hole milling machine for aluminium - pneumatic tool clamping - feeder: hand lever operation - safety device: 2,2 V *

Condition: used, Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Manufacturer: Elu, copy milling machine type AS 70 -Milling length: 365 mm -Milling width: 100 mm -Milling stroke: 45 mm -Motor: 220/380V 740W -Spindle speed: 12000 rpm -Dimensions: 800/750/H1320 mm Hjdjif Huvspfx Ackefl -Weight: 108kg

Year of construction: 1980, condition: good (used), Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Area of application: Processing of aluminium and steel profiles -with 1 vertical and 1 horizontal milling motor Hjdpfx Acegfcm Askofl -per engine: 0.74 kW 12,000 rpm -Installation dimensions 2800/1100/H1630 mm -Transport dimensions 800/1200/H1630 mm -Weight: 270 kg