Used Horizontal band saws - manual - cutting range 221-299mm for sale (92)
Sort results
- Lowest price Highest price
- Latest listings Oldest listings
- Shortest distance Farthest distance
- Latest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Latest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Latest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation A to Z
- Designation
- designation Z to A
- Designation
- Model A to Z
- Model
- Model Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest running time
- Runtime
- Relevance
- Relevance
Metal working machinery & machine tools Metal cutting saws Horizontal band saws - manual - cutting range 221-299mm
Listing

7,870 km
Band Saw
OPTIMUMOPTIsaw S 275 N
Call
Condition: used, Year of construction: 2022, cutting diameter max. 225 mm
saw band length 2.480 mm
width of saw-band 27 mm
dimensions of saw-band 2.480 x 27 x 0,9 mm
cutting angle 0 - 60 °
band speed 45 / 90 m/min
Cuttingrange 90° max. 225 mm
capacity 90 degrees: square 190 mm
capacity 90 degrees: flat 150 x 245 mm
capacity 60 degrees: round 90 mm
capacity 60 degrees: square 90 mm
capacity 60 degrees: flat 120 x 90 mm
capacity 45 degrees: round 145 mm
capacity 45 degrees: square 150 mm
capacity 45 degrees: flat 190 x 150 mm
total power requirement 1,3 kW
weight of the machine ca. 200 kg
dimensions of the machine ca. 2,0 x 2,0 x 2,0 m
Metal Bandsaw
Lhslstqmm Sjhcdw Eeg
OPTIMUM - OPTIsaw S 275 N
- NEW-MACHINE
Listing

8,032 km
Band sawing Forward
MetallkraftBMBS 230 x 280 H-DG
Call
Condition: new, Band saw machine
Lhjlhcdwscuntzj Eeg
Make: METALLKRAFT
Model: BMBS 230 x 280 H-DG
Art.no.: 3680013
Condition: New machine
Cutting range (round): 230 mm
cutting speed: 35/70 m/min
standard equipped with:
- horizontal vice
- length stop (600 mm)
- Monitoring of saw band tension, electromechanical
- chip clearing brush
- coolant device
- operating instructions
Listing

8,415 km
Bandsaw - Horizontal
BIANCO370 M SA
Call
Condition: new, neu
ca. 10 Wochen ab Auftrags
Italien
8680 €
179.68 €
Schwenkrahmen
3120x27x0,9 mm
35/70 m/min
280 mm
240 mm
370x140 mm
rund 225 mm, quadrat 215
rund 140 mm, quadrat 140
830 mm
1550 mm
1400 mm
1900 mm
353 kg
manual vice with lever for quick clamping
Ljlowirpvehcdw Eehg
gravity downfeed with adjustable damper
2 speeds
coolant equipment

Find out now
+49 201 857 86 180
+49 201 857 86 180
Create listing
*per listing / month
Listing

7,521 km
Band saw
kastoCUT E2
Call
Condition: ready for operation (used), Year of construction: 2012, saw band width: 230 mm, Cutting capacity 230 mm
Weight 500 kg
Lhelswku N Iehcdw Esg
Listing

7,625 km
Bandsaw - Horizontal
JAESPA250 GTH
Call
Condition: used, Year of construction: 2020, cutting diameter 250 mm
saw band length 3100 x 27 x 0,9 mm
capacity 90 degrees: square 220 mm
capacity 90 degrees: flat 280 x 190 mm
band speed 37 / 74 m/min
sawing motor 1,5 kW
weight of the machine ca. 0,5 t
dimensions of the machine ca. 1,6 x 1,4 x 1,3 m
Miter band saw
Lholowkvq Hehcdw Eeg
- Semi-automatic
- Double miter
- Material detection during lowering
Discover more used machines
Listing

7,585 km
Band Saw
MEPShark 332 NC evo
Call
Condition: used, Year of construction: 2009, cutting diameter 300 mm
saw band length 3320 mm
cutting width 330 mm
3320 x 27 x 0,9 mm
Lholhstxcypscdw Eeg
15 + 100 m/min
300 mm
260 mm
330 x 260 mm
180 mm
170 x 170 mm
170 mm
li. 260 / re. 200 mm
li. 270x200 / re. 200x160 mm
li. 250 / re. 180 mm
2,2 kW
1060 kg
2300 x 1945 x 2000 mm
Powerful miter band saw for cuts from 45 ° right to 60 °
Left
CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the
Feed and switch-off at the end of the cut)
Manual cutting cycle
AUTOMATIC CUT: (via selector switch) with stepless settings of the
Lowering speed and adjustment of the cutting pressure via compensating spring
Stable, torsion-resistant and low-vibration saw frame made of cast steel
Large, easily adjustable and mounted turntable, by means of central axis bolts
centered turntable with indexing at 0 ° / 45 ° / 60 ° and inside
Table clamp for intermediate angles
Vice with quick adjustment
Carbide band guides for maximum cutting precision
Large deflection discs, adjustable, made of cast steel
Hydraulic unit for the saw band tension and monitoring with display
Manometer (belt tension = 900 kg)
Clear switchboard with all controls
Underframe with lockable door and removable coolant tray,
electric coolant pump
Chip removal brush for cleaning the saw band
Listing

8,431 km
Band saw machine 250mm
CORMAKG5025
Call
Condition: used, Year of construction: 2025, A strong, big band saw for metals with a swivel arm, enabling cutting in the plane perpendicular to the axis of the cut material and at any angle from -45° (left) to + 60° (right). Band saws are perfect for cutting tubes, profiles and other materials.
Product features
Material cut can be fed manually or by any feeding device, with automatic tool feed. Appropriate cutting speed (band speed) is obtained through a change on a control panel. Rigid construction arm is made of profiled cast iron.
The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear carbide guides.
The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a -45° to + 60° swivel arm and control panel on separate arm.
The main cutting move in the cutting process is moving the cutting band. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks.
Technical data
Cutting band size - 2720×27×0.9 mm
Band tension - mechanical (manual)
Band speed - 36, 72 m/min
Arm lowering control - stepless – hydraulic cylinder
Vice base height - 765 mm
Minimum material length in vice - 100 mm
Power supply - 3-phase, 400 V
Total power - S1 100%: 1.5; S6 40%: 2.1
Lhslhewl Ecbocdw Ejg
Cooling pump motor power - 0.025 kW
Weight - 370 kg
Warranty - 12 months
User manual - yes
CE declaration - yes
Angle
0° --- ø250 310×210 240×240
45° R ø200 200×140 180×180
45° L ø165 185×145 160×160
60° R ø120 120×95 100×100
USED MACHINE: RETURNED, VERY VISIBLE TRACES OF USE, FUNCTIONAL AND READY TO WORK
The price is a net price. Price does not include shipping costs.
For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.
Listing

7,963 km
Band saw
BomarEasyCut 275.230 DG
Call
Condition: as good as new (ex-display), Year of construction: 2023, Functionality: fully functional, machine/vehicle number: 101.180.B1, Exhibition machine, built in 2023
Manual miter band saw with automatic cutting function for miters up to 45° on the left and up to 30° on the right
Cutting range Ø 230 mm
Drive power 1.1/1.5 kW
Saw blade 2,720 x 27 x 0.9 mm
Blade speed 40/80 m/min
Connection 400V
Incl.
- Automatic cutting function with quick approach to the workpiece via handle switch
- Ergonomic operation
- Driven chip brush
- Saw blade tension monitoring
- Quick-adjust vice
Lhslhcjdc Rxqsdw Ejg
- Large rotary table with integrated miter scale
- Coolant system with chip collection tray
Listing

8,415 km
Bandsaw - Horizontal
BIANCO280 M SA
Call
Condition: used, Year of construction: 2023, gebraucht
2023
6242
prompt, Zwischenverkauf v
Italien
5400 €
1
Schwenkrahmen
2450x27x0,9 mm
35/70 m/min
220 mm
220 mm
260x140 mm
rund 160 mm, quadrat 155
rund 95 mm, quadrat 95 mm
965 mm
Lhelhcowiqpzodw Eeg
1200 mm
1100 mm
1860 mm
240 kg
demo machine / mint condition
net price (price for new machine € 6.730,00)
manual vice with lever for quick clamping
gravity downfeed with adjustable damper
2 speeds
coolant equipment
OPTIONS:
Roller tables and band saw blades on request
Listing

7,891 km
Metal Band Saw
OptimumOPTIsaw S 275NV
Call
Condition: new, Year of construction: 2024, Functionality: fully functional, Metal Band Saw OPTIsaw S 275NV
Description:
Quiet operation
Sturdy cast construction
Lhjlhsvkcztecdw Esg
High cutting accuracy due to vibration-free operation
Adjustable lowering of the saw bow via hydraulic cylinder with throttle valve
Microswitch for automatic shut-off at the end of the cut
Coolant system included
Equipped with a high-quality bi-metal saw blade as standard
Adjustable material stop for series work
Robust machine base
Ball-bearing saw blade guide
Quick-action vise adjustable via handwheel
Clamping of the workpiece with a convenient quick-action lever
Easy-to-read scale for angle adjustment
Overload protection
S 275NV Features:
Infinitely adjustable saw blade speed: 20 - 90 m/min
Speed adjustment possible during operation
Pressure gauge for easy and correct saw blade tension adjustment
Technical Data:
Dimensions and Weights:
Length (product): approx. 1400 mm
Width/Depth (product): approx. 685 mm
Weight (net): approx. 185 kg
Max. Width/Depth (product): approx. 985 mm
Max. Height (product): approx. 1700 mm
Electrical Data:
Drive motor power: 1.5 kW
Connection voltage: 230 V
Frequency: 50 Hz
Coolant pump motor power: 90 W
Machine Data:
Saw blade speed: 20 – 90 m/min
Saw blade length: 2480 mm
Saw blade width: 27 mm
Saw blade thickness: 0.9 mm
Cutting angle: 0 – 60°
Feed: Infinitely adjustable
Raising of the saw bow: Manual
Cutting Ranges:
Cutting range at 0° round (solid material): 225 mm
Cutting range at 0° square (solid material): 190 mm
Cutting range at 0° rectangle lying (solid material): 150 x 245 mm
Cutting range at +45° round (solid material): 145 mm
Cutting range at +45° square (solid material): 150 mm
Cutting range at +45° rectangle lying (solid material): 190 x 150 mm
Cutting range at +60° round (solid material): 90 mm
Cutting range at +60° square (solid material): 90 mm
Cutting range at +60° rectangle lying (solid material): 120 x 90 mm
Note on cutting range: The cutting range is determined based on the weight of the saw bow with aluminum. It may vary with different materials and could be smaller (not cutting capacity).
Accessories:
Material stop
Bi-metal saw blade
Machine base
Coolant pump
Price: Available on request
Listing

7,842 km
Bandsaw - Horizontal
ELMAGCY 260x200G
Call
Condition: new, cutting diameter 260 mm
saw band length 2455 mm
cutting width max. 260 x 200 mm
Lslhcdwowc D Aze Eehg
dimensions of saw-band 2455 x 27 x 0,9 mm
cutting angle 0 - 60 °
power capacity 0,75 / 1.1 kW
cutting speed 34 / 68 m/min
table height over floor 900 mm
weight of the machine ca. 220 kg
dimensions of the machine ca. 1,45 x 0,72 x 1,05 m
- Automatic lowering device with control valve
- Quick-clamping vice
- Bar stop with material stop
- Quick-release angle clamp
- Angle scale
- Oil bath for permanent lubrication
- Cooling system with electric pump
- Saw blade wheels with precision bearings
- Saw blade track adjustment
- Saw blade tensioner
- Saw blade guide adjustable
- Adjustable tensioning bearing front/rear
- Chip brush
- Saw blade guard with limit switch
- Saw frame with tapered roller bearings
- Sheet steel base with chip tray
Listing

7,585 km
Band Saw
MEPShark 281 CCS
Call
Condition: new, cutting diameter 250 mm
saw band length 2950 mm
cutting width 280 mm
dimensions of saw-band 2950 x 27 x 0,9 mm
capacity 90 degrees: flat 280 x 200 mm
capacity 90 degrees: square 230 mm
capacity 45 degrees: round 190 mm
capacity 45 degrees: flat 180 x 180 mm
capacity 45 degrees: square 180 mm
capacity 60 degrees: round 120 mm
capacity 60 degrees: flat 110 x 110 mm
Lhslhcdoppgddsw Eog
capacity 60 degrees: square 110 mm
total power requirement 1,5 / 1,8 kW
weight of the machine ca. 0,4 t
Powerful miter band saw for cuts from 0 ° to 60 ° left
-CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the
Feed and switch-off at the end of the cut)
Description:
-Manual cutting cycle
-AUTOMATIC CUT: (via selector switch) with stepless settings of the
Lowering speed and adjustment of the cutting pressure via compensating spring
-Stable, torsion-resistant and low-vibration saw frame made of cast steel
-Vice with quick release
- Carbide band guides for maximum cutting precision
-Large dimensioned deflection discs, adjustable made of cast steel
-Hydraulic unit for the saw band tension and monitoring with display on
Manometer (belt tension = 900 kg)
-Clearly arranged control panel with all controls
-Electric coolant pump for cooling and lubricating the saw band
-Schipping brush for cleaning the saw band
Listing

8,431 km
Band saw machine 180mm
CORMAKBS712A 27mm 400V
Call
Condition: used, Year of construction: 2025, Band saw for metal, with optimal cutting range, commonly used in carpentry, production and craft facilities.
Machine description
Universal CORMAK BS 712 A band saw with CE marking is a trusted solution for metal cutting, unparalleled for years. Features high efficiency and easy handling. Makes it possible to cut in vertical plane and perpendicular to the cut material axis, or at any angle in 45°–90° range.
Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between the hydraulic cylinder chambers.
Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor.
Rugged, stable and refined construction as well as the arm made of uniform cast iron provide high rigidity and stability while cutting, ensuring accuracy and long-term reliability. The design of the 20 mm saw blade used in the machine makes it possible to cut large quantities of elements.
Technical data
Cutting band size 2360×27×0.9 mm
Band tension mechanical (manual)
Band speeds 22, 33, 45, 65 m/min
Feed speed 0–50 m/min (stepless feed)
Arm lowering control stepless – hydraulic cylinder
Power supply 3-phase 400V
Main motor power 1.1 kW
Weight 190 kg
Angle
0°.....180 mm....300×180 mm.....180×180 mm
45°.....130 mm....120×125 mm.....125×125 mm
Machine construction
Cutting band transmission system is composed of two cast iron wheels. The first wheel is a tensioning wheel (adjusted with a lever) and the second one is a drive wheel. Torque from the worm gear is directly transmitted to the tensioning wheel, while the worm gear is driven by an electric motor. Appropriate band angle is ensured through a set of roller bearings.
The base of the machine is a rigid cuboid made of steel sheets inside which is a cooling fluid container with a flood coolant pump. Due to swivel vice it is possible to cut material at 0°–45° angles.
Tank for flood coolant draining and a container for chips are fixed to the upper part of the machine. Cast iron workbench is attached to the tank, which in turn is equipped with a vice for material clamping and to which the arm of the band saw is fixed.
In the lower part of the machine base are holes for wheel axles. Safety during cutting process is ensured by an electric installation meeting all CE requirements. The machine is equipped with a limiting switch that stops the machine after cutting process is finished, an emergency button, a number of microswitches that switch the machine off when, e.g., the belt transmission guard or cutting band guard are opened. Additionally, our machine, as opposed to competitors, is equipped with a wire brush for band cleaning – it prevents the blade from blocking and ensures a more effective cutting.
USED MACHINE: RETURNED, WELDED ARM, FUNCTIONAL, TRACES OF USE
Lhjlhswl Ea Tjcdw Esg
The price is a net price. Price does not include shipping costs.
For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.
Listing

7,623 km
Bandsaw - Horizontal
FORTEF 250
Call
Condition: used, cutting diameter 250 mm
saw band length 3660 x 27 x 0,9 mm
cutting width 400 mm
engine 1,0 KW
motor speeds: 1400 U/min
Lolhov Nq Tnscdw Eehg
cutting speed 20 - 70 m/min
weight of the machine ca. 0,5 t
dimensions of the machine ca. 1,55 x 1,0 x 1,2 m
Listing

7,963 km
Manual miter band saw
BOMARBasiCut 275.230 DG
Call
Condition: as good as new (ex-display), Year of construction: 2023, Manual miter band saw for
Miters left up to 45° and right up to 30°
cutting range Ø 230 mm or 230 x 230 mm
drive power 1,1 /1,5 kW
saw band 2.720x27x0,9 mm
band speed 40/80 m/min
connection 400V
incl.
- Ergonomic operation
- Monitoring of saw band tension
- Quick vice adjustment
Ljlhcskhbg Uodw Eshg
- Coolant device with chip collection tray
Listing

7,719 km
Hydraulic swing frame metal band saw
METALLKRAFTBMBS 220 x 250 H-G - sofort verfügbar -
Call
Condition: new, Year of construction: 2025, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials
Two-pole drive motor enables saw band speeds of 30 and 65 m/min
Monitoring of saw blade tension electromechanically via microswitch
When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required
Saw arm inclined by 25°, thus longer service life of the saw band
Precise and robust band guides with adjustable HM plates
After completion of the cutting process the saw band stops automatically in the lower end position
Lowering of the saw arm by gravity or manually
With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder
Dimensions and weights
length approx. 1200 mm
width/depth approx. 650 mm
height approx. 1800 mm
Weight approx. 270 kg
Electrical data
Supply voltage 400 V
Mains frequency 50 Hz
Machine data
Saw band speed(s) 30 / 65 m/min
Speed levels 2
Saw band length 2450 mm
Saw band width 27 mm
Saw band thickness 0,9 mm
Material feed
Table height material feed 925 mm
Cutting range
0° round (tube) 220 mm
0° round (solid material) 120 mm
0° rectangular lying (hollow profile) 230 x 150 mm
0° bundle (tube) 230 x 120 mm
-45° round (tube) 160 mm
-45° round (solid material) 85 mm
Lhslhcdeg U Uv Rjw Eog
-45° rectangular lying (hollow profile) 160 x 90 mm
-60° round (tube) 90 mm
-60° round (solid material) 55 mm
-60° rectangular lying (hollow profile) 90 x 90 mm
Art. No.: 3680001
S
Listing

7,828 km
Band saw
JAESPAW 260 AZ
Call
Condition: used, Year of construction: 1994, Semi-automatic horizontal bandsaw for solid material and profiles
Cutting capacity up to approx. Ø 260 mm
Robust cast construction
Manual feed and hydraulic cutting cycle
Lhjlhcdswbfhcjw Eeg
Swivel head for angular cuts
Integrated coolant system
Ideal for workshops and industrial use
Listing

7,585 km
Band Saw
MEPShark 282 CCS
Call
Condition: new, cutting diameter 250 mm
saw band length 2950 mm
cutting width 280 mm
Lhjlhcdwoppgdas Eeg
2950 x 27 x 0,9 mm
285 mm
36 / 72 m/min
250 mm
220 mm
280 x 220 mm
120 mm
140 x 80 mm
80 mm
200 mm
links 220 x 200 / rechts mm
links 200 / rechts 170 mm
1,86 kW
0,4 t
1,8 x 1,3 x 1,8 m
Powerful miter band saw for cuts from 45 ° right to 60 °
Left
CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the
Feed and switch-off at the end of the cut)
Manual cutting cycle
AUTOMATIC CUT: (via selector switch) with stepless settings of the
Lowering speed and adjustment of the cutting pressure via compensating spring
Stable, torsion-resistant and low-vibration saw frame made of cast steel
Large, easily adjustable and mounted turntable, by means of central axis bolts
centered turntable with indexing at 0 ° / 45 ° / 60 ° and inside
Table clamp for intermediate angles
Vice with quick adjustment
Carbide band guides for maximum cutting precision
Large deflection discs, adjustable, made of cast steel
Hydraulic unit for the saw band tension and monitoring with display
Manometer (belt tension = 900 kg)
Clear switchboard with all controls
Underframe with lockable door and removable coolant tray,
electric coolant pump
Chip removal brush for cleaning the saw band
Listing

7,842 km
Bandsaw - Horizontal
OPTIMUMS 275 NV
Call
Condition: new, cutting diameter 225 mm
saw band length 2480 mm
cutting width max. 245 x 150 mm
voltage 230 V
power capacity 1,5 kW
dimensions of saw-band 2480 x 27 x 0,9 mm
mitter cutting 0 - 60 °
cutting speed 20 - 90 m/min
weight of the machine ca. 185 kg
dimensions of the machine ca. 1,4 x 0,69 x 1,7 m
- stepless speed
- stepless feed
- miter cut
- Bi-metal saw band
- Material stop
- Machine base
- Coolant device
Lelhcdsnlbmzsw Eehg
Listing

8,040 km
Bandsaw - Horizontal
KASTOSBL 280 U
Call
Condition: good (used), cutting diameter rund 280 mm
Lhslov Uckcshcdw Esg
saw band length 3830 x 25 x 0,90 mm
capacity 90 degrees: round 280 mm
capacity 60 degrees: square 280 x 280 mm
capacity 90 degrees: flat 360 x 180 mm
total power requirement 2,2 kW
weight of the machine ca. 0,5 t
dimensions of the machine ca. LBH 2,8 x 0,85 x 2,35 m
Listing

8,025 km
Band saw
MEBA410
Call
Condition: good (used), Year of construction: 2019, Functionality: fully functional, saw band length: 5,800 mm, saw band width: 41 mm, total height: 2,000 mm, total length: 1,200 mm, total width: 2,800 mm, cutting range round at 90°: 410 mm, cutting width (max.): 700 mm, overall weight: 1,650 kg, cutting height (max.): 410 mm, remaining piece length: 160 mm, MEBA 410 90 degree saw built in 2019 / Service was carried out regularly
Options: Minimum speed monitoring / clamping pressure regulation / bundle clamping / driven chip brush / material feed 1000mm + 2000mm / new price 35.000€
Machine can be inspected at the customer's premises and is sold directly by the customer
Lslhcju Niuuedw Ejhg
Trust Seal
Dealers certified through Werktuigen

Listing

7,946 km
MEP SHARK 281 CCS bandsaw machine
MEPSHARK 281 CCS
Call
Condition: new, MEP SHARK 281 CCS metal band saw with semi-automatic lowering. Item number: SH281CCS
motor power 1,5/1,8 kW
band opening 285 mm
band dimensions 2950x27x0,9 mm
weight 375Kg
Speed 36/72 m/min.
cutting surface 0° 250 / 230x230/ 280x200
cutting area 45° right 190 / 180x180/180x180
Cutting surface 45° left
Cutting surface 60° right
Cutting surface 60° left
Description:
Lhslhscgbp Iscdw Eeg
-Saw band arch, vise unit and base made of resistant cast iron.
-Precision degree marking on the cast iron structure
-Electrical system (with fully identifiable electrical wiring and low voltage 24 V system)
-Switching handle IP 55 for manual cycles (if present)
-Rotating scraper brush for the saw band
-Closing unit with vice for fast approaching
-Accurate stops with adjustment for miter cuts at 0°, 45°, 60° on the left side
-bi-metal saw band 2950 x 27 x 0,9 mm
-Wrench, instructions for use and instructions for ordering spare parts in the user's language
-SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cut with automatic head feed by own weight.
-CCS (Cut Control System) with (A switch for manual and automatic cutting - B) regulation of cutting speed - C) hydraulic brake with tank - D) end stop for stopping the belt) also available as an option for machines already in production.
-Vice with quick adjustment
-Hydraulic transducer for belt tension indication
-Electric coolant pump for cooling and lubrication of the saw band and manageable coolant tank above the base frame
-For the versions with pneumatic vice (MA), the opening and closing of the vice is done with a manual valve (available as an option with pedal control)
MEP SHARK 281 SXI evo [Semi-automatic]
Part number SH281SXI
motor power 1,5/1,8 kW
belt opening 285 mm
belt dimensions 2950x27x0,9 mm
weight 435 kg
Speed 36/72 m/min.
cutting surface 0° 250 / 230x230 / 280x200
cutting area 45° right 190 / 180x180 / 180x180
Cutting surface 45° left
Cutting surface 60° right
Cutting area 60° left
Description
Semi-automatic function:
Vise closes and motor starts, saw head lowers for cut, motor shuts off, saw head raises, vise opens.
Some features:
- New centralized control panel on articulated arm.
- Latest generation hydraulic control unit, highly efficient and with low energy consumption.
- Base with extractable coolant tank.
The machine complies with CE regulations in all areas!
For further technical data, please refer to the attached PDF document.
Listing

8,431 km
Band saw machine 250mm
CORMAKG5025
Call
Condition: new, Year of construction: 2025, A strong, big band saw for metals with a swivel arm, enabling cutting in the plane perpendicular to the axis of the cut material and at any angle from -45° (left) to + 60° (right). Band saws are perfect for cutting tubes, profiles and other materials.
Product features
Material cut can be fed manually or by any feeding device, with automatic tool feed. Appropriate cutting speed (band speed) is obtained through a change on a control panel. Rigid construction arm is made of profiled cast iron.
The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear carbide guides.
The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a -45° to + 60° swivel arm and control panel on separate arm.
The main cutting move in the cutting process is moving the cutting band. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks.
Lhslhcdwei D Ddio Eog
Technical data
Cutting band size - 2720×27×0.9 mm
Band tension - mechanical (manual)
Band speed - 36, 72 m/min
Arm lowering control - stepless – hydraulic cylinder
Vice base height - 765 mm
Minimum material length in vice - 100 mm
Power supply - 3-phase, 400 V
Total power - S1 100%: 1.5; S6 40%: 2.1
Cooling pump motor power - 0.025 kW
Weight - 370 kg
Warranty - 12 months
User manual - yes
CE declaration - yes
Angle
0° --- ø250 310×210 240×240
45° R ø200 200×140 180×180
45° L ø165 185×145 160×160
60° R ø120 120×95 100×100
The price is a net price. Price does not include shipping costs.
For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.
Listing

7,585 km
Band Saw
MEBAMEBAbase 24 DG-HS
Call
Condition: new, Year of construction: 2025, cutting diameter 240 mm
saw band length 2910 x 27 x 0,9 mm
cutting width 310 mm
table height 900 mm
Lholowa Ui Tshcdw Ejg
35 + 75 m/min
1,1/1,8 kW
470 kg
800 x 1720 x 1450 mm
Manufacturer no. 20437
Description:
- Miter cuts left 60° and right 45°
- Quick-action clamping stick can be moved in the T-slot for quick position
changes
- Hydraulic brake cylinder
- Large ball-bearing turntable for easy miter adjustment (durable)
- Chip clearing brush
- Machine base with automatic cooling system
- Lockable main switch, emergency stop separately
- EMC (Electromagnetic Compatibility), UVV
- Current consumption display (saw band wear history, tool monitoring)
- Automatically more performance with the proven Berg & Schmid 3-stage AutoCut
system
Listing

7,946 km
Band saw
OptimumOPTIsaw S 275NV
Call
Condition: new, OPTIsaw S 275NV swing frame - metal band saw
Description
Metal band saw with swivelling saw bracket. S 275NV with adjustable blade speed
-Quiet running
-Stabile casting
-High cutting accuracy due to vibration-free running
As the saw bar hydraulic cylinders with adjustable restrictor valve
Micro switch for automatic shut-off
Coolant system
-Equipped with high-quality bi metal blade
-Adjustable material stop for serial works
-Sturdy machine base
-Ball bearing blade Guide
Quick clamping Vice adjustable via Handwheel. Secure the workpiece with handy quick-release lever
Good readable scale for angle adjustment
Overload protection
S 275N
Lelhcdedc H Sisw Eshg
Motor protection switch
Two reversible speed
S 275NV
-Infinitely variable blade speed 20-90 m / min.
Speed change during operation possible
Pressure gauge
Simple and proper adjustment of blade tension
We make the search easier for you
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Horizontal band saws - manual - cutting range 221-299mm (92)
Search Werktuigen now with more than 200,000 used machines:
Find out now
+49 201 857 86 180
+49 201 857 86 180
Create listing
*per listing / month