Used double miter saws for sale (36)

Year of construction: 2000, condition: used, machine/vehicle number: 97464, cutting length: min./max. bei 90° 330/5000 mm disk of circular saw-Ø: 450/500 mm Nedpo Uir Esfx Af Tewd min. cutting length at 90°: 330 mm space needed: 6760 x 1590 x 1700 mm weight: 1550 kg

Year of construction: 1992, condition: used, machine/vehicle number: 7375, cutting length: 5000 mm disk of circular saw-Ø: je nach Bedarf 420 - 500 mm space needed: 6400 x 1400 x 1700 mm weight: ca. 1600 kg Nwjdpfx Afez E Sns Ted

Condition: good (used), functionality: fully functional, cutting length (max.): 600 mm, pivoting range: 20,135 °, For sale: 1 used double mitre saw Manufacturer: Hebö Maschinenfabrik Model: unknown Year of manufacture: unknown Saw blade diameter: 500 mm Processing length: up to 600 cm Nwjdpfsxrag Ejx Af Ted Mitre angle: 20 - 135 degrees Control system: see picture The machine can be inspected at our warehouse in 09599 Freiberg.

Condition: good (used), Year of construction: 2013, Double mitre saw for aluminium The saw blades can be swiveled and tilted. Control system: E355 Includes circular saw blades and extraction unit Technical data: Smallest cutting length at 90°: 375 mm Largest cutting length: 4500 mm Swivel angle inwards pneumatic: 90° - 45° (Manual up to 22.5° inwards and up to 140° outwards with digital display) Tilting angle inwards pneumatic: 90° - 45° (Intermediate angles manually adjustable with digital display and turret stop) Saw blade diameter: 550 mm Saw blade speed: 2250 rpm Nwjdpfx Aeyw R Rzsf Ted Power output per motor: 4 kW Dimensions: approx. 5790 / 1840 / 1985 mm Weight approx.: 2110 kg

Condition: new, Year of construction: 2026, Comparable to: e.g. Emmegi Double mitre saw for steel Cutting length: 5,000 mm Equipped with 7 NC axes for length positioning, outward and inward saw blade inclination, saw blade feed, and saw motor speed control Torsion-free welded construction with longitudinal linear guideways 2 x saw motors, each 4.5 kW Saw blade speed: 0–250 rpm Saw feed motorized from rear to front Feed speed infinitely adjustable Motorized angle adjustment between 135° and 45° Suitable for HSS circular saw blades, Ø 400 mm Pneumatic protective covers Water cooling with pump and coolant tank Left saw unit fixed to the base frame, right unit motorized and traversable Positioning accuracy: ± 0.15 mm Max. traverse speed: 25 m/min Length positioning compensates for saw angles and profile height Each saw head fitted with three horizontal and vertical profile clamps; in the event of pressure loss, the horizontal cylinders remain clamped Pneumatically swivelable material support between the saw heads 15” touchscreen Single cut processing Processing of cutting lists Creation of cutting lists via keyboard Import of cutting lists via USB flash drive or network interface Corner cutting Overlength cutting Short cuts from 5 mm cutting length Crosscuts Available options: Micro-spraying unit Saw head inward inclination increased to 150° Nwedpfsyinu Hox Af Tod Label printer Barcode scanner Additional network interface and teleservice agreement

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 04631037, cutting length (max.): 6,000 mm, Elumatec DG 104 Double Mitre Saw (Year 2006) – Precision Aluminium Processing For sale is a used double mitre saw, model Elumatec DG 104, manufactured in 2006. This machine is specifically designed for precision machining of aluminium and plastic profiles, making it ideal for use in window, door, and façade construction. Technical Highlights: - Double-sided tilting saw units for precise mitre cuts - Suitable for double mitre cuts from 45° to 90° - Robust machine construction for low-vibration operation - Pneumatic material clamping for secure workpiece hold - High cutting precision and repeatability - Intuitive operation Features: - 2 saw units - Pneumatic clamping device - Length stop - Cooling/spraying device Condition: The machine is in used, fully functional condition. Normal signs of use are present, but do not affect functionality. Nwsdpfx Afoyvrq Ts Ted Application Area: Ideal for metalworking shops, window manufacturers, and workshops that require precise and efficient mitre cutting. Other: Viewing by appointment possible. Loading can be supported if necessary. All information without guarantee. Subject to prior sale.

Condition: good (used), Year of construction: 2009, in a good working condition, DG244/E555/1 , 6 meters Nwsdpfotuvg Djx Af Ted

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: M274150, cutting length (max.): 6,100 mm, total length: 9,500 mm, total width: 1,800 mm, rotational speed (max.): 2,800 rpm, overall weight: 3,000 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Nodpfjym A U Asx Af Tewd Speed: 2,800 rpm Max. processing length: 6,100 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Power: 7 kW Current: 18 A Dimensions & Weight Dimensions (L x W x H): 9,500 x 1,800 x 1,800 mm Weight: 3,000 kg External reference: Groven - Lot 22

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: M275930, cutting length (max.): 6,000 mm, total length: 9,000 mm, total width: 2,000 mm, rotational speed (max.): 2,820 rpm, overall weight: 3,500 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid commits you to timely collection, either between 11.05.2026 and 13.05.2026, or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Speed: 2,820 rpm Max. machining length: 6,000 mm Nsdpfoym A Tfox Af Tewd MACHINE DETAILS Power: 7.7 kW Current: 19 A Voltage: 400 V Frequency: 50 Hz Dimensions & weight Dimensions (L x W x H): 9,000 x 2,000 x 2,000 mm Weight: 3,500 kg External Reference: Groven - Lot 19

Condition: good (used), Year of construction: 2008, Manufacturer: EBG-TECH Type: BMW N-63 Year: 2008 Max. disk diameter: 300 mm Overall size: 1900 x 1200 x 2900 mm Nodpfx Afof Ecwzs Tewd Weight: 1750 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, cutting length (max.): 6,000 mm, saw blade diameter: 500 mm, saw blade speed: 2,800 rpm, input voltage: 400 V, rotational speed (max.): 2,800 rpm, saw band length: 500 mm, main saw diameter: 500 mm, saw blade length: 6,000 mm, Double automatic aluminium saw with 500 mm blades. Cuts workpieces up to 6000 mm. Can automatically cut a whole profile into small parts. Length, cutting angle, and workpiece thickness are set electronically on the machine. The sawing unit operates flawlessly. For sale due to production shutdown. Nwjdpfxox U Df Hj Af Ted

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 244000015, cutting length (max.): 7,500 mm, saw blade diameter: 550 mm, Saw used only for special builds, has low operating hours, and is fully equipped. IMPORTANT: additionally features an automatically lowerable workpiece support. For further details, see PDF documentation in the attachment. Nwedpeyma Rnofx Af Ted

Condition: used, Technical details: saw blade diameter: 420 mm cutting lenght max.: 5000 mm Nwodpfx Afou Nigws Tsd cutting range: H x B: 180 x 100 mm air pressure - required: 6 bar mitter cutting - both sides: 45° - 90° (manuell) ° voltage: 380 / 220 V total power requirement: ca. 8,0 kW weight of the machine ca.: auf Anfrage t dimension machine xH: 6,4 x 1,3 x 2,0 m Circular saw with 2x sawhorses for cutting profiles with inclined cuts up to 45°. microprocessor positioning control BECKHOFF E 70-300 with absolute encoder, digital display travel per saw block = 2350mm, motorized Clamping cylinder for each horizontal and vertical, manual flushing device hydropneumatic feed use of carbide saw blades i.D. *

Condition: used, Year of construction: 1987, Cutting length 4500 mm Saw blades swivelling and tiltable Machine overhauled in 2019 Available from May 2026 Nwedpjymx Ewsfx Af Tsd Loaded free on truck

Condition: excellent (used), Year of construction: 2013, - Tools Ø 500 mm Nwsdpjx N R H Tjfx Af Tsd - Blade speed 2800 rpm - Weight approx. 1500 kg

Condition: used, Year of construction: 1991, saw blade diameter 275 mm cutting diameter 90 mm cutting speed 80 m/min EISELE Miter Circular Saw VMS 120 Saw blade diameter: 275 mm Cutting capacity at 90° (round): 90 mm Cutting capacity at 90° (rectangular): 75 × 75 mm Cutting capacity at 45° miter (rectangular): 75 × 75 mm Saw blade speed: 40 / 80 rpm Drive motor: 380 V, 1 / 1.2 kW Nwodpfex Avtvox Af Tjd Required floor space: 700 × 600 × 1580 mm Weight: approx. 180 kg

Condition: used, Year of construction: 1995, cutting width 375 mm Nwodpfx Afotv Rgrs Ted Cutting height 150 mm dimensions of saw-blade 500 x 30 mm Motor output 2 x 3 kW Cutting length 5100 mm speeds 2800 U/min air pressure 6 bar weight of the machine ca. 700 kg dimensions of the machine ca. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Stable cast construction of the saw unit * Large cutting range, 2 profiles can be cut at the same time * Easy adjustment of the moving unit with roller guides * Double storage of the swivel device * Safe clamping thanks to the two-pressure system * Double saw feed guide * Hydropneumatic saw feed * External dimension correction scale * Left saw unit fixed * Swivel range 45°-90° * Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002

Condition: new, Year of construction: 2026, Optimum Optisaw SD 500 Double miter metal band saw with swiveling saw bow Art. no. 3292380 length approx. 2122 mm width/depth approx. 1046 mm height approx. 1497 mm Weight approx. 522 kg Electrical data Motor power coolant pump 100 W Total connected load 3.8 kW Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 35 / 70 m/min Saw band length 3770 mm Saw band width 34 mm Saw band thickness 1,1 mm Cutting angle 45 - -60 ° Feed Hydraulic via lowering cylinder Lifting of saw bow manually Cutting ranges 0° round (solid material) 355 mm 0° square (solid material) 280 mm 0° rectangular upright (solid material) 280 x 490 mm -45° round (solid material) 290 mm -45° square (solid material) 250 mm -45° rectangle standing (solid material) 250 x 250 mm +45° round (solid material) 355 mm +45° square (solid material) 280 mm Njdpfxegd Si Eo Af Tswd +45° rectangle upright (solid material) 280 x 340 mm +60° round (solid material) 230 mm +60° square (solid material) 180 mm +60° rectangle standing (solid material) 180 x 220 mm Heavy industrial design Low noise operation High cutting accuracy due to vibration-free running Miter adjustment -45° to 60° by swiveling the entire saw bow High-quality bi-metal saw band as standard equipment Microswitch for automatic end stop Coolant pump Ball bearing saw band guide with hard metal plates for optimal cutting results Easy adjustment of the lowering speed by means of feed control valve in the control panel Large dimensioned quick clamping screw stoc [...]

Condition: good (used), Year of construction: 2012, machine/vehicle number: 104 93333473, Offer 26004 Nedpfx Afsyghxyo Tewd Technical specifications: - Saw blade diameter: 420 mm - Saw blade bore: 30 mm - Maximum cutting length: 6000 mm - Minimum cutting length at 90° + 45°: 335 mm - Cutting range: see attached diagram - Swivel range inward, pneumatically operated: 90° - 22.5° - Tilting range inward, pneumatically operated: 90° - 45° - Saw blade speed: 2,800 rpm - Drive: 400 V / 2 x 4,000 W - Compressed air connection: 7 bar - Air consumption per working cycle: - without spraying: approx. 40 l - with spraying: approx. 64 l - Space requirement: approx. W 8,500 x H 1,800 x D 1,800 mm - Weight: approx. 1,800 kg - Includes: - ELUMATEC E 355 control system, - Saw unit swivelling and tiltable for high and wide profiles, - Also suitable for compound mitre cuts, swivels inward up to 22.5°, - Digital degree display, - Separate control cabinet, - Timed spray unit

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Nwedpfx Aju Nigkof Ted Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Condition: new, Year of construction: 2025, Schnittbereich rund: 420 mm Schnittbereich quadratisch (B x H): 610x420 mm Schneidebereich 45° rund: 400 mm Schneidebereich 45° flach (B x H): 400x400 mm Schneidebereich 60° rund: 280 mm Cutting range 60° flat (W x H): 280x280 mm kleinste zu schneidende Größe: 10x10 mm Nsdpfx Ajxu A Dlef Tewd Kürzeste Reststücklänge im Einzelschnitt: 0-610 mm Kürzeste Reststücklänge im automatischen Betrieb*: 20 mm Length: 1780 mm Breite inkl. Späneförderer : 3060 mm Height: 1700 mm Höhe der Materialauflage: 905 mm Weight of machine approx.: 1210 kg Electrical connected load: 4 kW Leistung des Sägemotors: 3 kW Leistung hydraulischer Motor: 0,75 kW Schnittgeschwindigkeit stufenlos regelbar: 20-80 m / min Abmessungen des Sägebandes: 5200x34x1,1 mm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 13346021, A well-maintained double mitre bandsaw, manufacturer: BERG&SCHMID, model: GBS 242 DG Autocut, 35+70 m/min, 400 Volt, 2 speeds. Machine number: 13346021, year of manufacture: 2019, with % pieces of spare saw blades included. Nwsdeydnkdspfx Af Tod

Condition: good (used), Year of construction: 2006, Year: 2006 - technically efficient, ready to work - after full service - cutting length: 6000 mm - discs: 550 mm - E555 control - digital angle indicator - pneumatic angle adjustment 45-90 degrees Njdpfor Ikvuex Af Tswd - cutting according to external dimensions, without correction - cooling installation - roller feeder - vertical pneumatic clamps - automatically lowered and raised disc guards - chip extraction for each head

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Semi automatic double head cutting machine used for alu/PVC profiles. Nodpfx Ajygwt Hof Tswd Very good condition, in production.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Excellent technical condition of machine. Nwsdpewltqaofx Af Ted