Used Material transfer vehicles for sale (15)

Condition: used, Year of construction: 2006, Used machine Year of manufacture 2006 Save labor time with retrievable tools; once set up, the drive unit can be returned to its preset position with a single movement. With 3 milling units Mobile and flexible in use; chamfering, grooving, and flush milling Complement to the table and CNC milling machine Table size 520 x 430 mm with fine adjustment # 10450 Availability: Short term Drh82X Storage location: Solingen

Condition: used, Year of construction: 2019, Year of manufacture: 2019 Field of application: Construction Empty weight: 650 kg Carrying capacity: 3.000 kg GVW: 3.650 kg Btpc7Ip8Zq Amtec ATB 3 Asphalt Box. Year: 2019. Weight: 650 kg. Capacity: 3000 kg. Dimmensions: L: 3000 mm. W: 1700 mm. H: 1200 mm. 3 Pieces available! ID NR: 333. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: new, Field of application: Construction Empty weight: 16.000 kg Capacity: 10 m^2/h Full Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEEDING PUMP 1 4. FOAM LYE SYSTEM 1 B8Oulqv0Ig 5. PIPE NETWORK AND EQUIPMENTS 1 6. CONTROL PANEL SYSTEM 1 7. CHASSIS 1 FOAM TANK(1 pieces) a) Frame - Box profile - Capacity : 5 m3 - Tank body will be produced of 3 mm AISI 304 stainless steel plate - The welded connections will be manufactured with appropriate stainless stell TIG welding b) Heating - 2’’ stainless steel pipe - Oil input and output pipes will be 1’’ DN50,PN16,DIN 2633 - Tightness test will be done 6 bar pressure. c) Mixing System - 3 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. d) Heat displays will be digital and analogue and two outlets will exits. - Bitumen pump capacity will be as max. 8 m3/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. - Bitumen counter will be 10 m3/h capacity system. a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 1.5’’ inner pipe, 2’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 0,5’’. b) Compensatories - DN 50,DN 80, PN 16 200°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve. Heat resistant. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - The panel will be in type of compiled to IC standarts.

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Three-spindle underfloor milling machine from RUWI Professional equipment for the workshop This underfloor milling machine enables simple chamfering, rounding, profiling, grooving, grinding and various other milling tasks to achieve the desired result quickly. Quick tool changes are possible thanks to the handy tool store. Set-up times are increasingly eliminated with the larger models. Costly and time-consuming fine adjustments and trial milling, equipped with all important tools, are no longer necessary. The spindle can be infinitely adjusted to the correct working position. This model is ideal for use in the workshop and is often used for final processing. Made in Germany. Features and technical data: - High-quality workmanship - 3 tools on call - Control electronics prevent speed fluctuations under load - Robust and heavy-duty motor - Motor with overload protection - Temperature monitoring with PTC resistor. - Soft start and starting current limitation - The counter-rotating return thread above the ball bearings prevents the ingress of dust and dirt - Quick tool change - Dust extraction above and below the table plate - 1x fine adjustment - Incl. stop ruler - Incl. fastening set for table extension - Convenient tool change from above - BG and wood dust tested Technical data: - Table size: 640 x 500 - Table height: 910 mm - Infinitely variable speed control: 8000 - 25000 rpm - Tools on call: 3 - Milling stroke: 43 mm - Motor power: 1050 watts for continuous industrial use - Voltage: 230 V - Milling spindle: 22 mm diameter - Collets: 8 mm (standard) optionally also 6 mm, 6.35 mm and 10 mm - Suction connection: 120 mm - Mobility: 4 swivel castors - Weight: 91 kg Availability: short term E2Nmlni Location: Solingen

Condition: used, Year of construction: 2020, Year of manufacture: 2020 Field of application: Construction Empty weight: 650 kg Carrying capacity: 3.000 kg GVW: 3.650 kg CE mark: yes Amtec ATB 3 Asphalt Box. Year: 2020. Weight: 650 kg. Capacity: 3000 kg. Drclbb Dimmensions: L: 3000 mm. W: 1700 mm. H: 1200 mm. 3 Pieces available! ID NR: 332. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: used, New: Yes Field of application: Construction Empty weight: 16.000 kg Capacity: 10 Full Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEEDING PUMP 1 4. FOAM LYE SYSTEM 1 5. PIPE NETWORK AND EQUIPMENTS 1 6. CONTROL PANEL SYSTEM 1 7. CHASSIS 1 FOAM TANK(1 pieces) a) Frame - Box profile - Capacity : 5 m3 - Tank body will be produced of 3 mm AISI 304 stainless steel plate - The welded connections will be manufactured with appropriate stainless stell TIG welding b) Heating - 2’’ stainless steel pipe - Oil input and output pipes will be 1’’ DN50,PN16,DIN 2633 - Tightness test will be done 6 bar pressure. c) Mixing System - 3 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. d) Heat displays will be digital and analogue and two outlets will exits. - Bitumen pump capacity will be as max. 8 m3/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. - Bitumen counter will be 10 m3/h capacity system. a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 1.5’’ inner pipe, 2’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 0,5’’. b) Compensatories - DN 50,DN 80, PN 16 200°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve. Heat resistant. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - The panel will be in type of compiled to IC standarts. Bsif982R2Za

Condition: used, Year of construction: 1966, Used Machine Milling Rotor with 7 Spindles 6.2/7.5 HP Motor After setting the milling tools and the stop ruler once, they can be returned to the working position again and again without any adjustment work. By simply turning the rotor further, the selected spindle moves under the table opening and is brought into the working position by two turns of the handwheel located on the right side of the machine. It is ready for use without a test milling run. This takes approximately 10 to 20 seconds. Speeds from 3000 - 10000 rpm can be preselected and switched from the outside in 6 steps. Milling stop with 8-position turret head. Max. tool diameter: 190 mm Table size: 1300 x 1050 mm Table height: 810 mm Usable milling spindle height: 125 mm Milling spindle diameter: 30 mm Weight: approx. 1100 kg Cca7Vhykdm with Saoamad glazing bead cutting saw with Samco 8-roller feeder Availability: Short-term Storage location: Hochheim

Condition: used, Year of construction: 2018, Year of manufacture: 2018 Field of application: Construction Empty weight: 650 kg Carrying capacity: 3.000 kg GVW: 3.650 kg Drck9P Amtec ATB 3 Asphalt Box. Year: 2018. Weight: 650 kg. Capacity: 3000 kg. Dimmensions: L: 3000 mm. W: 1700 mm. H: 1200 mm. 3 Pieces available! ID NR: 331. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: used, New: Yes Field of application: Construction Empty weight: 16.000 kg Capacity: 10 Full Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEEDING PUMP 1 4. FOAM LYE SYSTEM 1 5. PIPE NETWORK AND EQUIPMENTS 1 6. CONTROL PANEL SYSTEM 1 7. CHASSIS 1 FOAM TANK(1 pieces) a) Frame - Box profile - Capacity : 5 m3 - Tank body will be produced of 3 mm AISI 304 stainless steel plate - The welded connections will be manufactured with appropriate stainless stell TIG welding b) Heating - 2’’ stainless steel pipe - Oil input and output pipes will be 1’’ DN50,PN16,DIN 2633 - Tightness test will be done 6 bar pressure. Pgjyept c) Mixing System - 3 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. d) Heat displays will be digital and analogue and two outlets will exits. - Bitumen pump capacity will be as max. 8 m3/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. - Bitumen counter will be 10 m3/h capacity system. a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 1.5’’ inner pipe, 2’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 0,5’’. b) Compensatories - DN 50,DN 80, PN 16 200°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve. Heat resistant. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - The panel will be in type of compiled to IC standarts.

Condition: used, Year of construction: 1974, Used machine Year of manufacture: 1974 Equipment and technical data: Vxg2Mm Spindle diameter: 30 mm 6 spindle speeds: 3,000/4,000/5,000/6,000/8,000/10,000 rpm Machine has no motor brake and can therefore only be sold as a spare part carrier! Availability: short term Location: Flörsheim

Condition: used, Year of construction: 1962, Used machine Used table milling machine of the company Bäuerle type SFM Year of construction: 1962 MNo.: 623596 Engine power: 3/4 HP 3 roll feed unit without milling tools Crkca87J due to the missing motor brake, the machine can only be sold as a spare parts carrier Availability: short term Location: Hochheim Hochheim

Condition: new, Year of construction: 2022, New machine Year of construction 2022 Save working time thanks to retrievable tools; once set up, the drive unit can be to the preset position again and again with a single movement Pypkyu Mobile and flexible use; chamfering, grooving, flush milling Supplement to the table and CNC router Table size 520 x 430 mm with fine adjustment # 10450 Availability: short term Storage location: Hochheim

Condition: used, Year of construction: 1963, Rigid milling machine Year of construction 1963 Spindle diameter 30 mm I9Iopid with Holz Her 3-roller feed unit Availability: short term Storage location: Röllbach

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Condition: workshop checked Rigid milling spindle; new bearings With table extension with extendable Frame support 2500 mm Motor 5.5 kW Speeds 3000/4500/6000/8000/10000 rpm Crw0Vkopfs Milling stop with 2 adjustment options; one overall stop and one rear removal jaw Suction hoods 120 mm Automatic motor brake Right-left rotation With Haffner feed with 4 rollers Weight approx. 700 kg Availability: by arrangement Location: Flörsheim

Condition: used, Year of construction: 1981, Used machine Year of construction 1981 Condition: workshop checked with 2-fold pneumatic lifting spindle mandrel diameter 40 mm Crw0Doh7Tw with large table 2500 mm with extendable frame support with routing fence with Panhans metal fence jaws and fine adjustment Pictures show machine in not yet checked condition Availability: by arrangement Location: Röllbach