Used Pilous Pp 361 for sale (48)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, control type: manual, total height: 1,400 mm, total length: 1,640 mm, total width: 750 mm, overall weight: 295 kg, table height: 900 mm, Equipment: CE marking, cooling unit, lighting, Technical specifications: Bevel cutting on two sides, Cutting speed: 40/80 m/min, Motor power: 0.9/1.4 kW; 400 V / 50 Hz, Machine dimensions (L x W x H): 1640 x 750 x 1400 mm, Machine weight: 295 kg, Saw blade dimensions: 2710 x 27 x 0.9 mm, Working height: 900 mm, Cutting range (90°): Ø 235 mm (300 x 200 mm), Main motor: 400 V, 50 Hz, 0.9/1.4 kW, Pump motor: 400 V, 50 Hz, 0.05 kW, Belt speed: 35/70 m/min, Vice working height: 900 mm, Coolant tank capacity: approx. 15 l. Chsdpfxjz Tdcxj Acfjd The saw is in very good technical condition and can be tested at our warehouse in Přerov.

Year of construction: 2017, condition: ready for operation (used), Metal Band Saw manufactured in 2017. This Pilous ARG 640 DCT SAF features a maximum cutting diameter of 640 mm and a cutting range of 1,100 × 550 mm at 90°. It operates with a saw band speed of 15–90 m/min and has a coolant tank capacity of 70 liters. If you are looking to get high-quality cutting capabilities, consider the Pilous ARG 640 DCT SAF machine we have for sale. Contact us for further details. - Connected Load (Power): 8.80 kW - Operating Voltage: 3 × 400 V - Mains Frequency: 50 Hz - Hydraulic Pressure Max.: 70 bar - Coolant Tank Capacity: 70 Liters - Saw Band Dimensions: 8,100 × 54 × 1.6 mm - Saw Band Speed: 15–90 m/min - Max. Cutting Diameter at 90°: 640 mm - Max. Cutting Range Rectangular at 90°: 1,100 × 550 mm - Max. Cutting Range at 45°: 710 × 550 mm - Max. Cutting Range at 60°: 375 × 550 mm - Vise Working Height: 800 mm - Machine Dimensions (L × W × H): 3,800 mm × 2,500–2,700 mm × 2,050–2,700 mm - Machine Weight: 4,200 kg Cjds Ahx D Eopfx Acfjhd

Year of construction: 2018, condition: ready for operation (used), Metal Band Saw manufactured in 2018. This Pilous ARG 640 DCT SAF features a cutting range of Ø 640 mm for round materials and 550 mm for square materials at 90°. It offers continuous angle setting for miter cutting from 90° to 60° left. With a robust design and a total weight of approximately 4200 kg, this machine is ideal for various cutting applications. If you are looking to get high-quality cutting capabilities, consider the Pilous ARG 640 DCT SAF machine we have for sale. Contact us for further details. Cjdpfxj Ahx R Ij Acfshd - Total Connected Load: 8.80 kW - Main Motor: 400 V / 50 Hz, 7.5 kW - Hydraulic Motor: 400 V / 50 Hz, 0.37 kW - Cooling Pump Motor: 400 V / 50 Hz, 0.12 kW - Connected Voltage: 3 × 400 V - Mains Frequency: 50 Hz - Hydraulic Pressure Max.: 70 bar - Coolant Tank Capacity: 70 Litres - Saw Band Dimensions: 8100 × 54 × 1.6 mm - Saw Blade Angle: 5° to the vice table surface - Saw Band Speed: 15–90 m/min (infinitely variable via frequency converter) - Cutting Range at 90° Round: Ø 640 mm - Cutting Range at 90° Square: 550 mm- Cutting Range at 90° Rectangular / Flat: 1100 × 550 mm - Cutting Range at 45° Round: Ø 640 mm - Cutting Range at 45° Square: 550 mm - Cutting Range at 45° Rectangular / Flat: 710 × 550 mm - Cutting Range at 60° Round: Ø 375 mm - Cutting Range at 60° Square: 375 mm - Cutting Range at 60° Rectangular / Flat: 375 × 550 mm - Miter Cutting Range: Continuous angle setting 90°–60° left - Vice Working Height: 800 mm - Machine Dimensions (Min.): 2050 × 3800 × 2500 mm - Machine Dimensions (Max.): 2700 × 3800 × 2700 mm - Total Machine Weight: 4200 kg – 4300 kg

Condition: used, Year of construction: 2015, functionality: fully functional, overall weight: 1,500 kg, # PILOUS ARG 500 plus S.A.F. The PILOUS ARG 500 plus S.A.F. is a heavy-duty horizontal band saw designed for the precise and efficient cutting of metal profiles, solid materials, pipes, and structural sections. The machine is suitable for industrial applications and offers adjustable blade speed, hydraulic clamping, and a robust construction for reliable long-term operation. Cjdpfx Aozvhw Tocfehd ### Technical Specifications * Model: PILOUS ARG 500 plus S.A.F. * Blade dimensions: 6040 × 41 × 1.3 mm * Blade speed: 15–90 m/min * Main motor: 400 V, 50 Hz, 4 kW * Pump motor: 400 V, 50 Hz, 0.12 kW * Hydraulic motor: 400 V, 50 Hz, 0.55 kW * Working height of vice: 870 mm * Hydraulic system oil capacity: 26 l * Hydraulic oil: ISO 6743-4/HM, DIN 51524 Part 2-HLP * Coolant tank capacity: 35 l * Machine dimensions, minimum: 1410 × 2370 × 1580 mm * Machine dimensions, maximum: 2000 × 2800 × 2150 mm * Machine weight: 1530 kg ### Cutting Capacity | Cutting angle | Round material | Square material | Rectangular material | | ----- | -----: | -----: | -----: | | 90° | Ø500 mm | 450 mm | 620 × 450 mm | | 45° | Ø500 mm | 440 mm | 440 × 450 mm | | +45° | Ø500 mm | 440 mm | 430 × 450 mm | | ±60° | Ø350 mm | 310 mm | 310 × 400 mm | The PILOUS ARG 500 plus S.A.F. combines high cutting capacity, variable blade speed, and hydraulic operation, making it a suitable solution for demanding industrial metal-cutting applications.

Condition: excellent (used), Year of construction: 2019, Horizontal, semi-automatic bandsaw machine in a robust design, intended for professional use. Chsdpfozwv Ntex Acfod The machine is equipped with a coolant system as standard; its design separates coarse dirt from the required coolant. The saw frame can be easily pivoted, allowing for bevel cuts on both sides, up to 60° to the right and up to 45° to the left. The pivoting saw frame is secured using a clamping lever. Semi-automatic operation: At the touch of a button, the complete cutting cycle is performed – tensioning the material, starting the saw blade and the cooling system, carrying out the cutting process, stopping the saw blade and the cooling system, returning the saw frame to the adjustable starting position, and opening the clamping device, resulting in comfortable and efficient operation. Operation in manual mode is also possible. The clamping pressure can be adjusted via the hydraulic unit. * The table rotates with the pivoting action, preventing cutting into the table. * Precise carbide guides for accurate cuts. * Display for saw blade tension. * Saw blade speed is frequency-controlled, ranging from 15-90 m/min. * Saw blade dimensions: 2880 x 27 x 0.9 mm * Optional laser line and micro-spray system. The saw blade can be changed easily and quickly, which simplifies the use of the appropriate saw blade and also protects the machine and the saw blade.

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, type of input current: three-phase, overall weight: 1,000 kg, Equipment: CE marking, documentation/manual, For sale: Pilous ARG 290 CF-NC Automat automatic bandsaw Czech-made, fully automatic NC bandsaw for series cutting. The cutting length and piece count are programmed on the control panel; feeding, clamping, and cutting operate hydraulically in an automatic cycle. Stepless blade speed control is achieved via a frequency inverter. General Manufacturer: Pilous (TMJ), Czech Republic Model: ARG 290 CF-NC Automat Control: Unitronics Vision 230 Technical data Cutting capacity at 90°: round [290 mm], flat [approx. 290 x 290 mm] Miter cutting: [stepless 90°–45°] Blade size: [2,910 or 3,110] x 27 x 0.9 mm Blade speed: [15–90 m/min], stepless Chedpfx Ajz H Nc Ajcfjd Main motor: [2.2 kW], 400 V / 50 Hz Length setting: NC-controlled, 0.1 mm accuracy, multiple feed for long pieces Hydraulic clamping, saw bow movement, and material feed Coolant system Weight: 1,000 kg Equipment Blade cleaning brush Chip container Spare blade included

Condition: like new (used), Year of construction: 2022, power: 3.5 kW (4.76 HP), input voltage: 400 V, input frequency: 50 Hz, total height: 2,150 mm, total length: 2,450 mm, total width: 2,550 mm, overall weight: 720 kg, The band saw is in like-new condition and has only been briefly put into operation. It has not been used since. Cjdpfxjz E E Uxj Acfehd The limit switch needs to be checked – the machine cannot be put into operation at the moment.

Condition: excellent (used), Year of construction: 2020, power: 1.4 kW (1.90 HP), control type: NC control, total height: 2,000 mm, total length: 1,900 mm, total width: 1,800 mm, Band saw PILOUS - ARG 260 Plus Bandsaw mitre cutting left & right Ø 260 MACH-ID 6223 Make: PILOUS Type: ARG 260 Plus Year: 2020 Chodpfx Acezc Il Ejfjd Optional roller conveyor D-300 x 2000 mm = EUR 550(6 rollers / 60 diameter / 300 Kg load 1 Mtr) Optional roller conveyor D-300 x 3000 mm = EUR 650(10 rollers / 60 diameter / 300 Kg load 1 Mtr.) Capacity 90°: 260° Cutting flat 90°: 300 x 200mm Capacity L 45°: 175° Capacity R 45°: 200° Cutting speed Vario:35 + 70 Circle blade size: 2880 x 27 x 0,9mm Power: 1,4kW Length: 1900mm Width: 1800mm Height: 2000mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2013, Block bandsaw CTR710M, year 2013, 12 m cutting length, incl. LG automatic feeder and scorer, 6 kW, 550 kg Cedpfx Acsxlng Tjfohd

Condition: excellent (used), For sale: a professional, industrial metal-cutting bandsaw, PILOUS ARG 380 Plus S.A.F., manufactured in 2010. The machine is in continuous operation and shows normal signs of wear and tear, as can be seen in the photos (paint scratches). However, from a technical and mechanical standpoint, it is in perfect working order and ready for heavy-duty use. Key features and technical condition: • Full semi-automatic operation (S.A.F.): Fully functional hydraulic cycle. When START is pressed, the machine automatically clamps the hydraulic vise, starts the bandsaw blade, performs the cut with the set feed rate, and automatically lifts the arm and opens the vise upon completion. • Smooth speed control: The built-in inverter works flawlessly, allowing smooth adjustment of the blade speed in the range of 15–90 m/min from the control panel. • Mechanical condition: The linear guides of the arm and the rotary table are clean and undamaged. The structure is rigid, with no cracks in the housing or hidden defects. • Powerful capabilities: Cuts materials and rolls with a diameter of up to 380 mm. The machine is massive (weighs approximately 1000 kg), which guarantees no vibrations and perfect cutting geometry. Chsdpfe Adyqxjx Acfsd

Condition: excellent (used), Year of construction: 2020, power: 1.5 kW (2.04 HP), total height: 2,000 mm, total length: 1,930 mm, total width: 1,610 mm, Band saw Chjdpszc Imijfx Acfjd PILOUS - ARG 235 Plus Bandsaw mitre cutting left & right Ø 235 Optional roller conveyor D-300 x 2000 mm = EUR 550(6 rollers / 60 diameter / 300 Kg load 1 Mtr)  Optional roller conveyor D-300 x 3000 mm = EUR 650(10 rollers / 60 diameter / 300 Kg load 1 Mtr.) Capacity 90°: 235° Cutting flat 90°: 280 x 180mm Capacity L 45°: 185° Capacity R 45°: 115° Cutting speed Vario:40 + 80 Circle blade size: 2710 x 27 x 0,9mm Power: 1,5kW Length: 1930mm Width: 1610mm Height: 2000mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, machine/vehicle number: G-BBS112186P, Hydraulic log band saw Forestor CTR800H including the following accessories: 3m extension section, chain log turner, hydraulically rotatable log lifter, Chodpfevw Eb Ajx Acfod hydraulic log lifter with drive, saw band tensioning device, 11 kW motor, pre-cutting device, ammeter, saw band guide electrically adjustable, LG Automat, irrigation pump with automatic switch-on Prices subject to change, errors, printing and typesetting errors reserved

Condition: like new (used), Demonstration machine The CTR1000H80 band saw with an 80 mm saw blade for even cleaner cuts and higher yield. Extra strong, solid, and durable sawing unit for log diameters up to 1000 mm. Soft starter included, expandable with extension sections. Automatic feed with infinitely variable speed. Electric height adjustment controlled from the operator panel. CE certified. Advantages and features: - Saw head suspended on both sides for greater stability and better precision. - 8.4-inch touchscreen LCD for quick and precise height adjustment. - With telescopic lever log turner and log lifter for easy log manipulation. - Log lifter with drive for horizontal log feed. - 5 swiveling hydraulic angle stops. 2 log clamping tools. - Hydraulic saw blade tension for quick adjustment. - Electrically adjustable saw blade guide and automatic coolant pump for high operator comfort. Cedpfx Acezqrm Ijfehd Technical data: Max. log diameter: 1000 mm Max. board width (slab width): 920 mm Max. saw blade stroke: 900 mm Min. cutting height: 30 mm Max. frame opening: 375 mm Cutting length of the base section: 7.5 m Length of the extension section: 3 m Saw blade drive output at 100% duty cycle: 22 kW Feed motor at 100% duty cycle: 3 kW Stroke motor: 0.55 kW Motor of the hydraulic unit: 5.5 kW

Condition: as good as new (ex-display), Demonstration Machine The professional block bandsaw for logs up to 100 cm in diameter from Forestor Pilous is the result of decades of sawmill tradition, specifically designed for professional sawyers. Equipped with a telescopic lever log turner, log lifter, and a powered log lifter for horizontal log feed. Features 5 hydraulic angle stops and 2 log clamping devices. The saw is standard for logs up to 7.6 m long and can be extended on request. Automatic feed with stepless speed adjustment. Electric height adjustment controlled from the operator panel. 8.4-inch touchscreen LCD for height settings, with two speeds for height adjustment. Includes stationary operator panel. Automatic rapid return. CE certified. Codpfx Acsvrvqwofjhd Technical Data: Max. log diameter: 1000 mm Max. board width (plank width): 850 mm Max. saw blade rise: 875 mm Min. cutting height: 30 mm Max. frame clearance: 450 mm Cutting length of base section: 7.6 m Extension section length: 3 m Saw blade drive: 15 kW Portal travel motor: 1.5 kW Lift motor: 0.55 kW Hydraulic unit motor: 5.5 kW Saw blade dimensions: 5350 x 35 ÷ 40 x 0.9 ÷ 1.1 mm Weight of base version: 2580 kg Extras not included in the price. (Image for reference only)

Condition: used, For sale: a CTR1000H40 in excellent condition with top-of-the-line features. Reason for sale: upgrading to a CTR1000H60 due to specific new orders. Condition: absolutely very good condition. Location: DE-85391 Aiterbach Contact person: Roman Griesauer Inspection: The machine is in operation and can be inspected and demonstrated upon request. Includes the following equipment: CTR1000H40-ZUB: Infeed system for the cut material CTR950H-DS: Dual-arm log loader CTR950H-HSD: Lever log turner CTR950H-KSD: Chain log turner CTR950H-MR: Material slide Chsdpfxezqrrqs Acfed CTR950H-SP: Clamping device CTR-18.5: Motor 18.5 kW CTR-AMP: Ammeter CTR-EGL: Electrically adjustable saw blade guide CTR-KV: Cable extension for an additional section CTR-Pumpe-EA: Irrigation pump with automatic start CTR-SSP: Saw blade tensioning device CTR-ZSP: Additional control station for hydraulics

Condition: as good as new (ex-display), Demonstration machine Cedpfx Asvrvq Decfehd Extra strong, robust, durable bandsaw mill for logs with a maximum diameter of up to 1000 mm. Includes soft starter, can be extended with extension sections. Automatic feed with infinitely variable speed. Electric height adjustment controlled from the operator panel. Equipped with telescopic log turner, log lifter, log lifter with drive for horizontal log feed. Hydraulic angle stops. Includes 2 log clamping devices. Hydraulic saw blade tensioning. Electrically adjustable saw blade guide. CE certified. Technical data: Max. log diameter: 1000 mm Max. board width (slab width): 920 mm Max. saw blade stroke: 900 mm Min. cutting height: 30 mm Max. frame opening: 365 mm Cutting length of base section: 7.5 m Extension section length: 3 m Saw blade drive output at 100% duty cycle: 22 kW Feed motor at 100% duty cycle: 3 kW Lift motor: 0.55 kW Hydraulic unit motor: 5.5 kW Saw blade dimensions: 5960 x 60 x 0.9-1.3 mm Weight of base version: 2800 kg This machine includes the following accessories: CTR-1000H60-Ver3 – 3m extension section (extends the cutting length by 3m). CTR-VOR-1300H – Pre-cutting device (for maximum saw blade service life). CTR-AMP – Ammeter (shows the current consumption). CTR950H-KSD – Chain log turner (for hydraulically turning logs). CTR950H-DS – Double-arm log loader (for hydraulic loading). CTR950H-MR – Material chute (allows the end of the pushed material to slide onto subsequent belt or roller conveyors). CTR1000H40-ZUB – Outfeed conveyor for sawn material (allows for very easy material removal or material can be pushed onto subsequent belt or roller conveyors).

Condition: used, Pilous CTR750EV bandsaw, very good condition, 5.5 kW, S6 7.5 kW, 3.6 m cutting length, 460 kg Chodpfjwzzf Djx Acfjd Price changes reserved, errors, misprints, and typographical mistakes excepted.

Condition: used, machine/vehicle number: G-BBS124070P, Pilous CTR750EV log band saw, very good condition, new rails, 5.5 kW, 4100 mm band length, 460 kg Prices subject to change, errors, printing and typesetting errors reserved Csdovw Ecgepfx Acfohd

Condition: as good as new (ex-display), Demonstration machine Codpevr I Rcsfx Acfshd Robust band saw for logs up to 71 cm in diameter with extendable rail sections—extension is unlimited. Automatic feed with continuously variable speed. Electric height adjustment controlled from the operator panel. 3.8-inch touch LCD display for height adjustment. Saw unit suspended on both sides for increased stability and improved precision. CE certified. Technical data: Max. log diameter: 71 cm Max. board width: 67 cm Motor output S1: 5.5 kW Cutting length, base version: 2.1 m Cutting length, extension section (optional): 3 m, 1 m Weight: 550 kg Extras not included in the price (sample image).

Condition: used, Double edger Pilous DB700M, year of manufacture 2023, as new, including saw blades, 11 kW, approx. 700 kg Prices subject to change, errors, printing and typesetting errors reserved Cjdpfx Aovr I Iujcfehd

Condition: used, Log band saw Pilous CTR750E, year of manufacture 2024, very good condition, stepless electric feed, 5.5 kW Chsdpfxjvrvlbs Acfsd Prices subject to change, errors, printing and typesetting errors reserved

Condition: new, Solid block band saw for log diameters up to 130 cm. Soft starter included, extendable with additional sections. Automatic feed with stepless speed adjustment. Electric height adjustment conveniently operated from the control panel. 8.4-inch touchscreen LCD for height control. Equipped with telescopic log turner, log lifter, 3 telescopic angle stops with 2 extendable log clamps, powered log lifter for horizontal log feed, and coolant pump. Saw unit is suspended on both sides for greater stability and improved precision. CE certified. Chodpfx Acovrvhvefjd Technical Data: Cutting length: 6.6 m Max. log diameter: 1300 mm Max. board width: 1000 mm Max. saw blade stroke: 1080 mm Max. frame passage: 365 mm Motor ratings at 100% duty cycle: Main motor: 22 kW Feed motor: 3 kW Hydraulic unit: 7.5 kW Lift motor: 0.75 kW Saw blade size: 6500 mm x 50-60 mm Weight: 3600 kg Optional Special Equipment: Extension section, each 4 m 30 kW motor Pre-cutter unit Double-arm log lifter Telescopic log turner Chain log turner Log clamp Material return conveyor Material chute Sharpening machine Setting device Tarpaulin cover Extras not included in the price (Example image)

Condition: new, Technical specifications can be found in the PDF file. Installed special equipment: KL Material slide for sections Cedpfx Acey Tvxcsfohd LS Laserliner CD Saw band tension indicator SD Screw conveyor for chips HVP 300 CF-NC Clamping force (for both clamping bars) MM Micro-spray system (cooling and lubrication with oil mist)

Condition: new, The cutting angle can be continuously adjusted manually within a range of 90° to 45°. Highly precise material feed, even with multiple feed cycles when cutting longer workpieces. Individual feed length: 500 mm. High feed rate possible while maintaining maximum accuracy. The 7.5-inch color touchscreen enables simple and intuitive control of all machine functions. The control unit allows programming of up to 60 programs for quick adjustment of the feed length. The machine can be controlled fully automatically, semi-automatically, or manually. The standard equipment includes control of the feed pressure, a stationary clamping device, and the feed rate. Chsdpfxoztva Dj Acfod A frequency converter enables continuous adjustment of the saw blade speed within a range of 15-90 m/min. Cutting range examples: 90° round: 260 mm 90° square: 245 mm 90° rectangle: 245 x 250 mm +45° round: 180 mm +45° square: 170 mm +45° rectangle: 180 x 120 mm Including: Coolant system Pressure gauge for saw blade tension Mechanical saw brush Material slide

Condition: new, Robust band saw for steel and stainless steel. Double-bevel cuts, up to 60° to the right and up to 45° to the left. 2 speeds: 35 and 70 m/min. Manual lifting of the saw frame, assisted by tension springs. Downward movement is achieved by gravity, dampened by an oil damper with an adjustable throttle valve. Cutting capacity examples: Round: 90°: 235 mm -45°: 165 mm +45°: 185 mm +60°: 115 mm Rectangular: 90°: 280 x 180 mm -45°: 185 x 80 mm +45°: 185 x 100 mm +60°: 115 x 80 mm With: Cooling system Vise with quick-release mechanism Mechanical material stop Manometer for saw blade tension Mechanical saw brush Codpfjztu R Iox Acfjhd - Also available in the ARG 260 Plus version (cutting capacity for round stock: 260 mm) – available from stock!