Used Tabe Agb-20 2300 Kg for sale (77,887)

Year of construction: 2024, condition: new, noris- Extruder MINI ESE 20/25 D Technical data Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Screw axial pressure [bar] 300 Continuous load 350 maximum Drive Three-phase drive with frequency converter Drive power [kW] max. 2.5 Reduction gear with integrated axial bearing Weight [kg] approx. 160 Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Redpfxehx Elfj Abbst Electrical connection values 3 / N / PE Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Temperature control electrical resistance heating bands in mica design. Max. processing temperature [°C] 300 Switch cabinet and control panel The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer

Condition: used, Year of construction: 2000, machine/vehicle number: P18096N, functionality: fully functional, pressing force: 20 t, stroke length: 160 mm, total height: 2,150 mm, overall weight: 180 kg, Good day, We hereby offer you, without obligation, a used workshop press from Rodcraft, model WP 20F. Manufacturer: Rodcraft Pneumatic Tools GmbH & Co. KG Model: WP 20 F Year of manufacture: 2000 Machine No.: P18096N Hydraulic stroke: 160 mm Pressing force: 20 t Machine dimensions: 2150 x 960 x 660 mm Transport dimensions: 2150 x 980 x 750 mm Machine weight: 180 kg Note: The above technical data has been taken from the manufacturer’s brochures or other sources, for which we cannot guarantee the accuracy or completeness. Scope of delivery: 1 unit used workshop press Rodcraft, type WP 20F Application area and condition: The machine was occasionally used in an industrial metalworking shop for pressing out bearings, etc. The machine is fully functional and in good condition. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH Redpfx Absygm N Djbet

Condition: good (used), Pipe grab, round grab, laying tongs, round material grab, scissor grab, rectangular tongs, clamp, clamping pliers -Manufacturer: Siegert, rectangular pliers type GZ Rjdelg H I Iepfx Abbjt -Grasping range: 20 to 60 mm -Load capacity: 500 kg -Quantity: 1x gripper available -Price: per piece -Dimensions: 500/100/H350 mm -Empty weight: 17 kg/pc.

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. Rjdpfenh R Ekjx Abbst TECHNICAL DATA: - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available - Special tools possible - Sharp-edged tools with bending radius R2 or 5 mm - round tools R 10 to 25 mm for bends max. 260° optional OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: excellent (used), For sale: Professional lifting set: DEMAG chain hoist + VETTER travelling beam – complete kit High-quality German-made equipment, designed for industrial use. TECHNICAL DATA: Lifting capacity: 2000 kg (2 tons) Redpfx Abey A Tgcebjt Beam length: approx. 242 cm Hoist manufacturer: DEMAG Beam manufacturer: VETTER Fördertechnik Power supply: 400V, 3 phases, 50 Hz Year of manufacture: 1997 Lifting speeds: 2-speed (slow + fast) Control: pendant remote (up/down + STOP) Chain: original, in good condition Trolley: manual (moves along the beam) DEMAG hoists are known for their industrial durability and reliability. SET INCLUDES: ✔ DEMAG chain hoist ✔ VETTER travelling beam (approx. 2.4 m) ✔ Manual trolley ✔ Control pendant (remote) ✔ Wiring ✔ Safety hook TECHNICAL CONDITION: unit in working order normal signs of use ready for operation without additional investment APPLICATIONS: workshops warehouses production halls service stations assembly work

Condition: used, We are offering a used drive-through floor scale for sale. TECHNICAL DATA Manufacturer: Kern Model: NFB 600K200LM Rodpfxsy Ep Tho Abbot Weighing range: 600 kg with evaluation unit Weighing surface dimensions: 1,200 x 1,200 mm Platform dimensions: 1,800 x 1,400 mm Readability: 0.2 kg Weight: 235 kg Condition: used PRICES Price: €695.00 net per unit Price: €825.05 gross per unit incl. VAT YOUR CONTACT PERSONS AT OUR COMPANY: Tanja Henkelmann Rainer Nürenberg Oliver Kopp PAYMENT TERMS Payment conditions are to be agreed in case of order. The price is per unit/net price or as stated in the description (plus VAT). Of course, you will receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, steel mezzanine floors, textile warehouses, as well as machinery for commerce, industry, and trades. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us. Four wins – The success building blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions.

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Rjdsyzc Ruepfx Abbst

Year of construction: 2020, condition: used, functionality: fully functional, We offer these used KD pipes, diameter 315 mm, KG 2000 KG wastewater pipes, green, year of manufacture 2020. Approx. 70 m in total, pipe length 5 m, including various bends, Y-pieces, etc. Temperature range: -20 to 90 °C Sealing material: rubber rings according to DIN EN 681 Color: May green RAL 6017 Material: Polypropylene (PP) Ring stiffness SN: 10 kN/m² Tightness (guaranteed up to): 7.0 bar Chemical resistance (pH range): 2 to 12 pH Thermal conductivity: 0.04 W/(K·m) Coefficient of linear expansion: 0.08 mm/(m·K) Short-term modulus of elasticity: 2500 N/mm² Rodpfsyyml Tsx Abbjt Long-term modulus of elasticity: 450 N/mm² If you have any questions or need further information, feel free to send us a message or call us.

Condition: excellent (used), For sale: Electric chain hoist from the renowned manufacturer Yale, model CPVF 10-8 NE. The device is in very good technical condition and is equipped with a Magnetek radio remote control system (transmitter + receiver). Technical data: • Model: CPVF 10-8 NE • Lifting capacity: 1000 kg • Year of manufacture: 2019 • Power supply: 400V / 3-phase Redpoyrh I Ejfx Abbet • Lifting speed: 2 / 8 m/min • Control: radio remote control • Condition: very good, normal signs of use

Condition: new, Year of construction: 2026, 200L mobile pressure-blasting vessel for construction sites or stationary use. Fittings are securely mounted under the handle. Very well suited for robust site applications. Comprising: - 200L pressure vessel - Pre-sieve - Weather protection lid - Water separator - Pressure regulator - Adjustable conveying air control (air quantity for vessel and blast hose) - Blast hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx: 3.57m³/min) - Abrasive metering valve, Y-piece rubber coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: - Dead man's switch with control cable - Controlled quick venting Optional: - Larger handle with hose holder - Wet blasting head Rjdpfx Aboynr E Tobjt - Breathing air heater - Transport frame with bucket (Hobbock) and lid as an attachment for extended blasting without refilling - etc. Manufactured in Germany

Condition: new, empty load weight: 448 kg, maximum load weight: 1,552 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,000 mm, loading space width: 1,500 mm, loading space height: 370 mm, loading space volume: 1.8 m³, color: silver, construction height: 1,280 mm, working width: 1,980 mm, Hydraulics, automatic reversing, hot-dip galvanized, unbraked, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle with 2 years TÜV from first registration - TÜV: 2 years - Floor: Multiplex screen printing with anti-slip surface - Gross vehicle weight: 2,000 kg - Unladen weight: 448 kg - Payload: 1.552 kg - Internal dimensions: 300 x 150 x 37 cm (L x W x H) - External dimensions: 431 x 198 x 128 cm (L x W x H) - Loading sill height: 52 cm - Tires: 185/70R13C steel rim - Brake: yes - Support wheel: yes, automatic - Incl. Vehicle documents (letter) - 100 km/h at extra charge Standard equipment: - Anodized aluminium drop sides with profile channel from the outside - Accessories such as lashing eyes, tarpaulin buttons, hooks or hammerhead bolts can be easily fitted without drilling. - Finnish quality wooden floor - aluminium tailgate in proven Hapert look - dropside retaining ropes on tailgate - sturdy eccentric locks for the tailgate recessed in the dropside profile - very sturdy welded steel frame - frame completely hot-dip galvanized - many options available. hot-dip galvanized - many sturdy cross members for high point loading - dropside struts on the side (optimum lateral stability) - with integrated lashing holes - H-frame removable at the front - perforated railing on three sides 6cm (Combi-Protectrail) can also be used with locking bars and lashing straps - round holes 25mm, Slotted holes 54x25mm - 6 lashing brackets recessed inside the side edge TÜV certified to 1000DaN / kg - Maintenance-free rubber spring axle from BPW - Automatic reverse drive - BPW overrun hitch and parking brake - Hinges for tailgate welded to the frame and with hooks for load securing such as netsvery sturdy bolted V-drawbar REINFORCED - steel mudguards - 13-pin plug - reversing lights - generously dimensioned safety lighting - integrated rear fog light - lighting recessed in the rear frame - position lights in white at the front - preparation for rear supports - automatic support wheel in the middle Accessories optionally available: - Tarpaulin + bows - Supports, grids, side wall attachments, nets etc. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Rjdpfou Ht D Iox Abbjt

Condition: new, Year of construction: 2025, Hand pallet truck 2000 kg LWPW with weighing system, new 2025. Continuous stock, see our website. Prices are ex Nuland. Van de Wert Trading B.V. has a variable stock of machines, trucks, trailers, and attachments. All deliveries are offered at trade prices in AS-IS condition without warranty. (see our general terms and conditions) For a viewing and/or test drive, you can schedule a non-binding appointment. Please call in advance, as we are not always present. Rodjx Td Dtjpfx Abbjt Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: new, empty load weight: 690 kg, maximum load weight: 2,310 kg, overall weight: 3,000 kg, loading space length: 4,400 mm, loading space width: 2,070 mm, Car transporter or multi-transporter from the manufacturer HULCO model CARAX-2 3000 440x207. As standard equipment, the Hulco car trailer has an aluminum floor, lashing eyes on the outside of the frame, loading ramps that can be inserted under the loading area, sloping rear, low chassis, stable welded steel frame, support wheel and a V-drawbar. We also offer accessories for Hulco car transport trailers such as high tarpaulins, wheel stops, rear support sets, tool boxes, lashing straps and anti-theft devices. --- You can also find all of our cost-effective offers on our homepage Delivery throughout Germany (except islands) possible! Feel free to ask us about the prices. ---    Rodpfsh N T T Njx Abbet Car Trailer Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax:       Pick-up times: Monday - Friday – 9.30 a.m.    Pick-up is not possible on Saturdays!

Condition: refurbished (used), NIMO-KG SKV 200 MK ID.NO. 2196 Nimo-KG SKV 200 MK trolley lift for 200 liter trolleys. Dimensions 110 x 130 cm Height 480 cm Tipping height 380 cm. Rodpfx Ajhua Hdebbst

Condition: excellent (used), NIMO-KG SKV200 MK Rodpfxsiz Awwe Abbot ID.NO. 2470 Nimo-KG SKV 200 MK meatbin lifter for 200 liter meatbins. Dimensions W 130 D 120 cm Total height 400 cm. Tip height 302 cm.

Condition: new, empty load weight: 750 kg, maximum load weight: 2,250 kg, overall weight: 3,000 kg, loading space length: 5,400 mm, loading space width: 2,070 mm, tire size: 195/50r13c, Car transporter or multi-transporter from the manufacturer HULCO model CARAX-2 3000 540x207. As standard equipment, the Hulco car trailer has an aluminum floor, lashing eyes on the outside of the frame, loading ramps that can be inserted under the loading area, sloping rear, low chassis, stable welded steel frame, support wheel and a V-drawbar. We also offer accessories for Hulco car transport trailers such as high tarpaulin, wheel stoppers, rear support set, drawbar box, car lashing straps and locks. --- You can also find all of our cost-effective offers on our homepage Delivery throughout Germany (except islands) possible! Feel free to ask us about the prices. ---    Car trailer center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Pick-up times: Monday - Friday – 9 a.m. 8 p.m.    Rjdpfoh Rlvdsx Abbjt Pick-up is not possible on Saturdays!

Condition: new, Year of construction: 2024, machine/vehicle number: BN120XT-HA-X, JEWELliner "CUT" 120W model series "PremiumPlus" Cutting & Marking in very short working time. - Developed and produced in Germany - Other models, laser power and options on request. Engraving Laser (fiber technology) with security housing „LASER CLASS 1“. Compact designed, all components are in the housing and will be air cooled. Maintenance free! Our engraving laser JEWELliner "CUT" is very usefull to cut precious metals and soft metals till max. thickness of 2.5mm. Thicker metals are possible, please contact us for more informations. More materials to cut or engrave like all metals, ceramic and some plastics, are possible. Applications can found in the jewellery ans also in other production areas. The machine dimension is very compact to integrade simple into a production area. Samples to cut: gold, silver, brass, carbon, aluminium Samples of material to mark: steel, stainless steel, gold, silver, titan, aluminium, brass, copper, brounce, carbon, ceramic, makrolon Possibilities of application: - graphic engraving (logo, draw, handdraws, signatures) - serial numbers - barcode, datamatrix, QR-code - ring inside (f.e. name, date, symbol, handwrite) optional - ring outside (f.e. name, endless graphic, endless pattern) optional - bangles inside/outside - optional - text (text straight, circled text, bowed text, text symbols) - handwrite - finger print - photo engraving (photos, pictures) - micro engraving (micro text till 0.15mm character high) - round engraving (engraving on round or bowed surfaces) optional The main parts of JEWELliner "CUT" ( BN120XT-HA-X ) : - fiber laser unit with scan head and focus pointer - security housing „Laser Class 1“ with 280x200mm security glass - electrical automatic door opening - emergency button - 180° view area to the marking field - electrical z-axis for automatic focus positioning - configured engraving software Rodpfef Ul Uiox Abbet Specification: - laser technology: fiber laser - outputpower CW: 120W - available frequency: 2.1 - 6300kHz MOPA - connection type data: USB 2.0 - wave length: 1064nm - lens (delivery): F-Theta 163 - marking field size: 110 x 110 mm – bigger or smaller possible - focus range: ca. 2 mm - min character high: 0.3 mm - min. line width: 0.023 mm - cooling: air cooled - maintenance: no service necessary - power: AC 110V / 240V – 50/60Hz – short cut save - dimension: L850 x W660 x H680 mm - weight: ca. 80kg The engraving laser is after the delivery immediately ready to use. In this way, the machine can be integrated in the production very fast. The machines can be inspected and tested by appointment. Pictures can be different!

Condition: new, Year of construction: 2025, Pressure blasting cabinet DSK 15.15.20.RB75 with or without roller conveyor. Blasting chamber W=1150 D=1150 H=930mm. 1 TÜV-tested pressure vessel 20l with conical outlet funnel. 1 blasting medium dosing valve with blasting medium quantity regulation pneumatically controlled. 1 built-in closing cone with guide tube. 1 compressed air connection with pneumat. Shut-off valve and branch for control air. 1 pressure regulator to adjust the blasting pressure. 1 blasting hose DN19. 1 handpiece with boron carbide blasting nozzle Venturi 8mm. 1 pair of blasting gloves. Dust extraction filter 2000m³/h 2,2kW Rodpfxsga I R Es Abbst

Condition: new, Year of construction: 2025, Pressure blasting cabin DSK 20.10.09 with carriage and turntable. width: 2050mm depth: 935mm height: 955mm Pneumatic lifting door with the advantage that the abrasive falls into the cabin when opening the door and not on the floor. If you have any questions about technical specifications etc. please contact us in writing or by telephone. The basis of the machines is the production at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with the well-known contacts of many years. Rsdpfsfnh Rvex Abbst

Condition: new, empty load weight: 780 kg, maximum load weight: 2,220 kg, overall weight: 3,000 kg, loading space length: 6,110 mm, loading space width: 2,030 mm, tire size: 185/60R12, High loader tandem from the manufacturer HULCO model MEDAX-2 3000.611x203. Rjdpfx Ajq Nf Egsbbot The standard equipment of the Hulco flatbed high loader with brake includes aluminum drop sides, all folding and removable, stable eccentric locks, lashing eyes inside, lashing hooks outside, profile channels for attaching accessories or load securing, very stable welded lattice steel frame, pull-out supports for tailgate, support wheel and a V-drawbar. We also offer accessories for Hulco car trailers such as high tarpaulin, net hooks, ramp set with holder, rear support set, accessory box, straps and anti-theft device.

Condition: excellent (used), Bosch U-HD 350 Kg/h. Bj2015 Weishaupt burner gas or oil possible Rodpjm Rhdyjfx Abbst

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 30214501, turning length: 2,000 mm, total length: 12,000 mm, WFL Millturn M60/2000 WORKING RANGE center distance mm 2000 swing over bed, turning diameter mm 690 MAIN DRIVE AC-drive with 2 gear steps drive power 100% duty cycle kW 40 max. speed min-1 3300 Redpfx Aju Hl R Tsbbjt max. torque at the spindle 100% duty cycle Nm 1830 TAILSTOCK quill diameter mm 140 quill travel mm 160 quill force (adjustable) N 3500-31000 quill with installed live center MK 5 TOOL HOLDER (single tool holder, turning-boring-milling unit) AC-drive drive power 100% duty cycle kW 30 speed range max. min-1 6000 max. torque at the spindle 100% duty cycle Nm 315 travel vertical to the X/Z-plane (Y-axis) mm 300[-125/+175] pivot capability of the milling spindle (B-axis) ° -110/+90 spindle head acc. DIN 69893 HSK-A100 spindle diameter in front bearing mm 100 DIMENSIONS length (max. tool magazine) m 11 width/height m 3,9/3,3

Condition: used, mileage: 535,000 km, power: 240 kW (326.31 HP), first registration: 09/2016, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,500 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 9,500 mm, total width: 2,540 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 7,550 mm, loading space width: 2,460 mm, loading space height: 2,550 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, spoiler, tail-lift, traction control, Technical information Number of cylinders: 6 Engine capacity: 7.698 cc Front axle: Max. axle load: 7500 kg; Tyre profile left: 70%; Tyre profile right: 70% Rear axle: Double wheels; Max. axle load: 11500 kg; Tyre profile left inner: 90%; Tyre profile left outer: 90%; Tyre profile right outer: 90%; Tyre profile right outer: 90% Weights Empty weight: 9.235 kg Carrying capacity: 9.765 kg GVW: 19.000 kg Functional Tail lift: Dhollandia, tail lift, 2000 kg Financial information Price: On request Identification Registration number: 41-BHR-6 = Additional options and accessories = - Aluminium fuel tank Rsdpoyybyljfx Abbot - Camera system - Central lubrication - Comfort seat with heating - Hardwood floor - Heavy duty engine brake - Radio/CD/USB - Rear air suspension - Reversing camera - Roof spoiler - Suspension seat - Toolbox 2x - Visor

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 04/2006, loading space length: 10,500 mm, loading space width: 2,500 mm, loading space height: 2,600 mm, total length: 10,750 mm, total width: 2,550 mm, wheelbase: 7,200 mm, color: other, Year of construction: 2006, Equipment: tail-lift, = Additional options and accessories = - Air suspension - Steering Axle - Sunroof = Remarks = Pacton Citytrailer, 2006, BPW asses, Tridec controlled, Sliding roof, Rear-closing tailgate = More information = Rear axle 1: Double wheels; Max. axle load: 9000 kg; Steering Rear axle 2: Max. axle load: 9000 kg Empty weight: 6.820 kg Carrying capacity: 23.180 kg Rodex E S Spopfx Abbjt GVW: 30.000 kg Tail lift: Dhollandia 2000 kg, tail lift APK (MOT): tested until 07/2026 = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: excellent (used), Year of construction: 2015, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR853 robot Year of manufacture: 2015 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1,877 bar Dose volume: 1,212 ccm Clamping unit: Clamping force: 350 t Tie bar spacing: 720x720 mm Platen size: 1,040x1,060 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Rsdpfx Absy Dqh Hebst Euromap 67 Robot interface Control with air valve Control with hot runner x 5 Injection unit hardened - bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable output Built-in printer Machine regularly serviced by authorized Sumitomo Demag service Wittmann-Demag DR853 robot Year of manufacture: 2016 6-axis robot: 5 axes driven by servo motors (electric): X, Y-telescopic, Z, B, C Axis travels: X-1,200, Y-2,400, Z-4,000 Touch control panel Safety package for robots Robot with adapter, conveyor belt and protective enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request