Used Maxion Unimax 3 for sale (16)

Condition: used, Column drilling machine IXION - MAXION type Unimax 3 serial no. 201516 year of construction 2009 Drilling capacity 30 mm Spindle holder MK 3 - short quill throat 260 mm Quill stroke 125 mm Table size 360 x 500 mm Column diameter 110 mm Hjdpforz Tuwjx Abxsw Spindle speed 80 - 3200 rpm infinitely variable Motor power 0.8 / 1.5 kW Mains connection 400 Volt, 50 Hz - Spindle speed via 2 V-belt stages, 2 motor speeds and infinitely variable via variator drive - Motor speed level 1 for clockwise and counter-clockwise rotation, motor speed level 2 for clockwise rotation - Handwheel for quill fine feed - Drill table height adjustment via hand crank - RÖHM quick-action drill chuck Ø 1 - 16 mm - Emergency stop button Space requirement L x W x H 800 x 530 x 1800 mm Weight 230 kg Very good condition

Condition: new, Column Drilling Machine Brand: MAXION Model: Unimax 3 Year of manufacture: 2000 – workshop tested Machine no.: 201154 Spindle speed (stepless): Range A: 80 – 1,440 rpm Range B: 180 – 3,200 rpm Standard drilling capacity: 30 mm Spindle taper: MK 3 Hedpfx Ajxr Dbgobxsw Standard features: - Full motor protection - Forward/reverse switch - Digital speed display - Table adjustment via rack and pinion - Emergency stop button - Operating manual Sold used as seen, without warranty The machine's technical condition corresponds to the standards of its year of manufacture.

Condition: good (used), Year of construction: 2005, Offer 25320 Technical data: - Drilling capacity in steel ST 60: 30 mm - Drill spindle taper: MT 3 - Drill spindle stroke: 125 mm - Infinitely variable spindle speed: 80 – 3200 rpm - Tapping capability via reversing function up to M 20 - Throat depth: 260 mm - Max. distance table – drill spindle: 825 mm - Table with 2 T-slots: 500 x 360 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 0.8 / 1.5 kW - Space requirement approx.: W 500 x H 1900 x D 950 mm Hedpfx Asxtm Eqebxow - Weight approx.: 230 kg - Machine vice

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm Hedpfefg U Tpex Abxow bore stroke 125 mm spindle taper MK 3 spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, Spindle: MK 3 Continuous drilling capacity: 25 mm normal drilling capacity: 30 mm Tapping capacity: M 20 drilling depth: 125 mm throat depth: 260 mm Distance spindle/table: 90 to 840 mm Hjdpfxeb Eli Hj Abxsw table surface: 500 x 365 mm column diameter: 110 mm total height: 1.855 mm weight: 250 kg motor pole-changing: 0,8/1,5 kW Spindle speed infinitely variable range A: 80 - 1.440 min-1 range B: 180 - 3.200 min-1 Digital display for speed as standard.

Condition: new, MAXION UNIMAX 3 AV pillar drilling machine Modern, precise production drilling machine based on the proven UNIMAX3 concept, with infinitely variable feed drive, automatic tool ejector and chip breaking control as standard, reversing switch right/left rotation. Feed rate, speed and drilling depth are shown in the display and the drilling depth is programmed. Technical data: Continuous drilling capacity in St 60 25 mm Drilling capacity normal 30 mm Tapping capacity M 20 spindle MK 3 drilling depth 125 mm throat 260 mm distance spindle/table 90 to 840 mm table surface 500 x 400 mm column diameter 110 mm Hsdpogv I U Ssfx Abxow total height 1.900 mm weight 280 kg motor power 0,8/1,5 kW Spindle speed infinitely variable range A 80-1.440 rpm Range B 180-3,200 rpm details see data sheet enclosed - please ask for further models

Condition: new, UNIMAX 3 PILLAR DRILL Powerful, precise pillar drill with a wide range of applications. Drilling table adjustable via rack and worm gear and pivoting around the column. Reversible switch for forward/reverse rotation, emergency stop button, digital speed display Infinitely variable spindle speeds Range A 80 - 1440 rpm Range B 180 - 3200 rpm Continuous drilling capacity 25 mm Standard drilling capacity 30 mm Tapping capacity M 20 Spindle MT 3 Drilling depth 125 mm Thrust 260 mm Spindle/table 90 to 840 mm Table surface 500 x 365 mm Total height 1855 mm Weight 250 kg Incl. Drilling kit, consisting of 1 drill chuck taper MK3 / B16 2 reduction inserts MK3 / 2, MK3 / 1 1 MSP 140 vise 1 keyless drill chuck 1 - 16 mm / B16 Hodpowkhliefx Abxsw

Condition: new, Column Drilling Machine Brand: MAXION Model: Unimax 3 Year of manufacture: 2002 – workshop tested Machine no.: 201835 Spindle speed (stepless): Range A 80 – 1,440 rpm Range B 180 – 3,200 rpm Normal drilling capacity: 30 mm Spindle taper: MK 3 Standard equipment includes: - Full motor protection - Reversing switch for right/left rotation - Digital speed display Hjdexr Da Aopfx Abxow - Table adjustment via rack and pinion - Emergency stop button - Operating manual Used as seen, without warranty. The machine corresponds technically to the state of the art at the time of manufacture.

Condition: good (used), Year of construction: 2000, Offer 25273 Technical specifications: - Drilling capacity in steel ST 60: 30 mm - Drill spindle mount: MT 3 - Drill spindle stroke: 125 mm - Infinitely variable spindle speeds: 80 - 3200 rpm - Tapping capability, right/left rotation up to M20 - Throat depth: 260 mm - Max. distance table – spindle: 825 mm - Table with 2 T-slots: 500 × 360 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 0.8 / 1.5 kW Hedpjw Hx Iaofx Abxjw - Required space approx.: W 500 × H 1900 × D 950 mm - Weight approx.: 230 kg

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 feed range - spindle 0 mm/U spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Hsdpsfg U Tnefx Abxow Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, Modern, precise production column drilling machine based on the proven UNIMAX 3 concept with stepless feed drive, automatic tool ejector, and standard chip breaker control. The digital display shows feed rate, speed, and drilling depth. Forward/reverse switch. Emergency stop button. Full motor protection. Preconfigured machine with optional thread cutting device, free-cutting function, and LED lamp. Hjdpfx Asf Ey Aujbxew Standard drilling capacity in E 335: 30 mm Tapping capacity: M 20 Spindle: MT 3 Feed rate continuously adjustable in the range: 30 - 400 mm/min Programmable drilling depth: 125 mm Throat: 260 mm Distance spindle/table: 90 to 840 mm Table surface: 500 x 365 mm Column diameter: 110 mm Total height: 1,900 mm Weight: 280 kg Pole-changing motor: 0.8/1.5 kW Spindle speeds continuously adjustable Drilling range A: 80 - 1,440 rpm Drilling range B: 180 - 3,200 rpm Pre-configured machine including special equipment: - Thread cutting device - Free-cutting function - LED lamp

Condition: new, Column drilling machine Make: MAXION Model: UNIMAX 3 Condition: New machine Spindle speed (infinitely variable): Range A 80 - 1.440 rpm range B 180 - 3.200 rpm normal drilling capacity: 30 mm standard equipped with: - Full motor protection - reversing switch right/left rotation - digital speed display - table adjustment via toothed rack - drill protection - emergency stop button - instruction manual Hedpsb Hl Irefx Abxjw

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 feed range - spindle 30 - 400 mm/U spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device Hedpfx Abepam Hrexsw - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, Column drilling machine Make: MAXION Hsdpfx Abod Hrhvexjw Model: UNIMAX 3 TAP Condition new machine Spindle speed (continuous): Area A-80 - 1,440 RPM. Area B 180-3,200 RPM. Standard ALB ear performance: 30 mm equipped as standard with: -infinitely variable speed control -Digital display for speed -Digital display for drilling depth -Thread cutting device -Light machine -automatic tool ejector -Manual

Condition: new, Column drilling machine Make: MAXION Model: UNIMAX 3 AVG Condition: New machine Spindle speed (infinitely variable): Hjdpebrfmkjfx Abxew Range A 80 - 1.440 rpm range B 180 - 3.200 rpm normal drilling capacity: 30 mm standard equipped with: - infinitely variable drill feed - infinitely variable speed control - digital display for speed, feed and and drilling depth - automatic tool ejector - operating instructions with the following options: - Tapping device

Condition: new, High performance threading machine with lead screw and optimal safety device against tool breakage. Program for single or continuous cycle. Electronically controlled motor braking for single cycle. Easy lead screw change by quick coupling. Technical data UNIMAX 3T GL: Threading capacity: M 4 - M20 Thread per hour: 800 Normal drilling capacity: 28 mm spindle: MK 3 thread depth: 90 mm drilling depth: 120 mm throat: 260 mm spindle / table: 220 - 600 mm table surface: 420 x 390 mm Hodpfegv I Unex Abxow T-slot width: 14 mm column diameter: 110 mm total height: 1.300 mm weight: 250 kg special motor: 0,9 kW Mains connection: 400 V / 50 Hz 9 spindle speeds: 95 / 160 / 200 / 350 / 420 / 450 / 750 / 900 / 1,650 rpm Standard packing: C - 160x75x125 cm Other accessories / options: Lead screw, tap holder, outfeed switch, forced-ventilated motor, die holder, flange quill, foot pulse button, two-hand start, LED machine light, minimum quantity lubrication system, base cabinet.