Used other drilling machines and boring mills for sale (46)

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 60176, New pneumatic self feed drill unit with 2 signal transmitters and their holders good for drilling or milling Speed (r.p.m. no load): 32,000 rpm Stroke: 40 mm dashpot: 15 mm Motor power: 0.25 kW Total length: 10.63 In. Operating pressure: 5.5 bar lubricated compressed air Suitable for collets (not included) with diameters of 3 to 8 mm Included are 2 signal transmitters (24 V DC, M8 connector, 5 m cable) and holders Hedpfx Akov Tnh Rsuot Other versions (speeds, stroke, etc.) are available upon request.

Year of construction: 2007, condition: ready for operation (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,220 mm, number of axes: 5, This 5-axis TOS Varnsdorf WHN130 was manufactured in 2007. It features a horizontal boring and milling machine with a table size of 1600 × 1800 mm and a spindle diameter of 130 mm. The machine includes a rotary table and is controlled by an NCT-104 system. Consider the opportunity to buy this TOS Varnsdorf WHN130 boring machine. Contact us for more information. • Control system: NCT-104 Spindle • Spindle diameter: 130 mm • Taper: ISO 50 (7:24) • Spindle speed range: 10 – 1500 rpm • Max spindle torque: approx. 2350 Nm • Main motor power: 37 kW Axis Travels • X-axis travel: 3500 mm • Y-axis travel: 2000 mm • Z-axis travel: 1220 mm • W-axis (spindle quill travel): 570 mm Table • Rotary table size: 1600 x 1800 mm • Max workpiece weight: 12,000 kg • T-slots: 22 x 9 x 160 mm • B-axis table feed: 0.03 – 1.5 rpm Feed Rates Hedpfxsx Imtao Akujt • Rapid traverse (X / Y / Z / W): 2000 mm/min Power • Total power requirement: approx. 80 – 83 kVA

Condition: new, functionality: fully functional, Fervi T047/400VDA geared drill and milling machine, tapping function, 400V, 1.5kW NEW, “CE” certified. Promotional price – limited availability, subject to prior sale. The machine can be used for the following operations: Milling Drilling Tapping. Drilling capacity in cast iron with pre-drilled hole: ø 40 mm. Maximum drilling capacity in steel with pre-drilled hole: ø 32 mm. Milling capacity with insert cutter: ø 80 mm. Milling capacity: ø 25 mm. Tapping capacity: Ø 22 mm. Taper attachment: CM 4. Spindle stroke: 130 mm. Spindle housing: ø 76 mm. Column: ø 115 mm. Head tilt: ± 60°. Spindle speed: (12) 75 ÷ 3200 rpm. Three-phase motor: 400 V 50 Hz 1.1 – 1.5 kW. Hsdpfjg Npiwjx Akujt Table dimensions: 585 x 190 mm. T-slot: 12 mm. Base dimensions: 648 x 412 mm. Overall dimensions: 740 x 790 x 1960h mm Weight: 390 Kg.

Year of construction: 1987, condition: used, bore diameter 550 mm Spindle diameter 100 mm bore depth 320 mm turning speeds 10 70 U/min feed stepless 0 - 12 mm/min voltage 380 V / 50 Hz total power requirement 3 kW weight of the machine ca. 1.35 t dimensions of the machine ca. 1,0 x 2,5 x 1,0 m Transportable boring mill, completely ready for connection, Hjdpfxetv Ihwe Akust Drilling spindle drive via LENZE planetary gear, feed drive with LENZE DC motor, power 100 watts, left and right rotation, with tool holder for Ø 420 and Ø 550 mm, tool holder for facing tool, make LENZ LPAS 3, various turning steels,

Year of construction: 1987, condition: used, bore diameter 620 mm spindle diameter 130 mm bore depth 320 mm feed stepless 0 - 12 mm/min turning speeds 10 - 70 U/min voltage 380 V / 50 Hz Hedpfjt I D Swjx Akuot total power requirement 4 kW weight of the machine ca. 1,6 t dimensions of the machine ca. 2,0 x 1,2 x 1,3 m transportable drilling out work, completely ready for connection gear of drill spindle runs over LENZE planetary drive advanced feed with LENZE direct current motor, output: 160 watt clockwise and counterclockwise with tool holder for Ø 420 x 620 mm, tool holder for tooling equipment fabri. LENZ LPAS 3, diverse turning steel

Year of construction: 1988, condition: used, throat - mm tool adaptor - power requirement - kW 23 mm spindle distance max. 400 mm 1200 U/min total power requirement kW Hjdpfx Astqqkxskujt weight of the machine ca. t dimensions of the machine ca. m

Condition: good (used), ERLO SG- 18 tapping drill CEE Hjdpfxotrdimj Akujt Table with casters Instruction booklet

Year of construction: 2004, condition: ready for operation (used), travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 700 mm, controller manufacturer: HEIDENHAIN, controller model: 430M, total width: 5,350 mm, total height: 4,020 mm, spindle motor power: 18,500 W, product length (max.): 5,150 mm, spindle speed (max.): 6,000 rpm, tool weight: 3,500 g, number of axes: 6, This 6-axis IXION AUERBACH IA2 TLF-1200.4 drilling machine was manufactured in 2004. It features an impressive X-axis travel of 1,200 mm, Y-axis travel of 1,200 mm, and Z-axis travel of 700 mm. The machine includes a robust rotary table surface of 1,000 x 1,000 mm and a maximum workpiece weight capacity of 7,000 kg. If you are looking to get high-quality drilling capabilities, consider the IXION AUERBACH IA2 TLF-1200.4 machine we have for sale. Contact us for further details. • Axes travels: • W (deep hole drilling/milling unit, horizontal): 1,200 mm • A (swiveling deep hole drilling/milling unit): +25° / -15° • B (NC rotary table): 360° • Rotary table: 1,000 x 1,000 mm, 5 T-slots • Max. workpiece weight: 7,000 kg • Max. torque: 115 Nm • Deep drilling capacity: • Max. depth (single pass): 1,200 mm • Diameter range: 3 – 25 mm (up to 36 mm with ELB in reinforced version) • High-pressure coolant system: 100 bar at 42 l/min (upgrade option 001b to 95 l/min) • Tool changer: 24 stations • Max. tool length: 300 mm • Max. tool diameter: 90 mm (160 mm with free adjacent pockets) Additional equipment • Full enclosure with roof • Oil mist extractor • Chip conveyor • 2 traveling steady rests Hodpfeyzgvuox Akujt • Deep drilling start package: tool holders and Botek Type 110 tools for various diameters Technical Specification Taper Size ISO 40

Year of construction: 1981, condition: used, machine/vehicle number: 3328781, Adjustment range of the stop in the x-axis: up to approximately 1150 mm Adjustment range of the stop in the y-axis: up to 150 mm Hsdjbnpcwjpfx Akuot Theoretically suitable for material thicknesses up to: 190 mm Electrical connection: 380 V Space requirement: 2050 x 850 x 1200 mm Weight: 138 kg

Year of construction: 2004, condition: ready for operation (used), Drill diameter: 13 mm Spindle mount: B 16 Speed with switchover for left and right rotation: 0 - 840 rpm Power consumption: 450 W Hjdpfx Akjd D Th Heujt For alternating current: 230 V

Condition: used, Drilling device on a base plate with a three-jaw chuck and a two-way height-adjustable and horizontally movable mounting for a drill press. Consisting of: AROWA three-jaw chuck, 250 mm diameter, horizontally rotatable by 380° with a scale, indexing, and clamping mechanism. Base frame for mounting a drill press, guided on two columns and with a spindle for height adjustment. On top of this, a mounting adjustable by 120 mm in the horizontal plane with a scale. On top of this, a basic height adjustment on the round column with a clamping mechanism. Round guide with rack and lever for drill feed, stroke 100 mm. Hsdsc U U Udepfx Akust Overall dimensions: 600 x 400 x 850 mm high Weight:

Condition: ready for operation (used), Year of construction: 2006, Speeds up to: 2250 rpm Feed rate: 0 - 300 mm/min Drive power per motor: 2.9 kW Electrical connection: 400 V Weight: 395 kg Required space: 4100 x 1670 x 1450 mm Hodpfxoyfgd Eo Akujt

Year of construction: 2000, condition: ready for operation (used), travel distance X-axis: 3,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 2,200 mm, spindle motor power: 27,000 W, spindle speed (max.): 3,000 rpm, number of axes: 3, This 5-axis San Rocco FMC 110/S-MMZ CNC ECS 4801 (OE) was manufactured in 2000. It features a horizontal spindle orientation, a table size of 1,300 x 1,100 mm, and a tool magazine with 30 positions. Spindle speeds range from 20 to 3,000 rpm, and it includes a continuous rotary table. Consider the opportunity to buy this San Rocco FMC 110/S-MMZ CNC ECS 4801 (OE) boring machine. Contact us for more information about this machine. Hsdpfx Akeyguz Ueuet • Table size: 1,300 x 1,100 mm • W-axis travel (boring head): 600 mm • B-axis rotation (rotary table): Continuous • Spindle orientation: Horizontal • Tool magazine: 30 positions Technical Specification Taper Size ISO 50

Year of construction: 1996, condition: ready for operation (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, spindle speed (max.): 2,500 rpm, number of axes: 5, This 5-axis TOS WHN 13.8 boring machine was manufactured in 1996. It features a working spindle diameter of 130 mm, X-axis travel of 3500 mm, Y-axis travel of 2000 mm, and a Z-axis travel of 1250 mm. The rotary table clamping surface measures 2200 x 1800 mm, supporting a maximum workpiece weight of 12,000 kg. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 machine we have for sale. Contact us for more information. Hjdpfx Aeyar D Hskuet Machine Benefits Technical Machine Benefits • Rotary table clamping surface: 2200 x 1800 mm Extra Information Working spindle diameter: 130 mm Technical Specification Taper Size ISO 50

Year of construction: 2009, condition: ready for operation (used), travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: HEIDENHAIN, controller model: tnc 530, spindle speed (max.): 1,200 rpm, swivel angle B-axis (max.): 360 °, number of axes: 5, This 4-axis MONTAVAR HBG 105 CNC was manufactured in 2009. It features X-axis travel of 2000 mm, Y-axis travel of 1250 mm, Z-axis travel of 1000 mm, W-axis stroke of 600 mm, and B-axis rotation of 360 degrees. Equipped with Heidenhain TNC 530 controls and a maximum RPM of 1200. If you are looking to get high-quality milling capabilities consider the MONTAVAR HBG 105 CNC machine we have for sale. Contact us for more information. Extra Information Hedpfjx N Dd Ejx Akust Machine still under power

Condition: used, Year of construction: 1977, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,000 mm, spindle diameter: 160 mm, spindle speed (min.): 2 rpm, spindle speed (max.): 560 rpm, table length: 1,800 mm, table width: 2,000 mm, Manufactured by Union WMW (Germany) Year of manufacture 1977 Spindle diameter, mm 160 Face plate diameter, mm 950 Spindle speed range, rpm 2.8 – 560 X Axis Travel, mm 3600 Y Axis Travel, mm 3000 Z Axis Spindle Travel, mm 1000 W Axis Longitudinal Column Travel, mm 500 Hodpfx Aoy Uw Afskujt Rotary table size, mm 2000 x 1800 Rotary table longitudinal movement, mm 1250 Spindle motor, kW 22 Floor plate size, mm 3500 x 2000 (2 units) UNION BFP 160 is a heavy-duty floor type horizontal boring and milling machine manufactured by UNION Gera, Germany. Equipped with a 160 mm spindle, the machine is designed for precision machining of large and heavy workpieces in metalworking, energy, mining, and heavy industry applications. The borer is under power, fully complete and equipped with some tools.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Equipment: lighting, rotational speed infinitely variable, type plate available, Out of insolvency: Erlo Iberdrill AZ 34 Year of construction 2020 Speeds infinitely variable via potentiometer 80-2010 rpm automatic feed 0,1--0,2--0,3 Digital speed display Coolant pump Thread cutting function with foot switch working light Hodpfxjrfxqlo Akuot Pinol stroke 150mm throat depth 300mm Mounting MK 4 Röhm Supra 3-16mm drill chuck Table clamping surface 330x320mm Height of the machine 1930mm Weight approx. 350kg 3KW power 380 Volt

Condition: repair required (used), Somex Max 2 Drilling Unit Manufacturer: Somex Model: Max 2 Spindle mount: ER 20 collet chuck RPM: 2820 * Hz: 50 * kW: 0.37 * Hjdjd Huwgjpfx Akuot V: 220 / 380 * A: 2.1 / 1.2 * *The motor data cannot be verified and is not legible! Presumably, the data is similar to that of identical units.

Condition: excellent (used), Somex Max 2 Drilling Unit Manufacturer: Somex Model: Max 2 Spindle mount: Adjustable sleeve, Ø 12mm kW: 0.37 V: 380-420V / 220-240V A: 1.1 / 1.9 RPM: 2820 Hz: 50 A total of 3 units are available. The price mentioned above is per unit. Hjdpfsd Huvyox Akuet

Year of construction: 1995, condition: used, bore capacity in steel (diameter) 50 mm throat 335 mm bore stroke 250 mm feed power max. 16 kN Hodpfx Akowu Hg Teujt spindle taper MK4 spindle motor 3 kW table surface area 850 x 450 mm travel -x axis 600 mm travel -y axis 300 mm travel -z axis 205 mm weight of the machine ca. 1,8 t dimensions of the machine ca. 1,618 x 1,802 x 2,520 m

Year of construction: 1997, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, controller manufacturer: Fanuc, spindle speed (max.): 20,000 rpm, machine/vehicle number: 97-VP461, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 400 mm Travel Z-axis: 350 mm Hedpfx Asyi U Iaskujt Spindle speed: 20,000 rpm Tool changer positions: 30 MACHINE DETAILS Control manufacturer: Fanuc EQUIPMENT BT 40 Big Plus tool holder 4th axis table Oil mist minimum quantity lubrication system