Used Kaltenbach for sale (113)

Year of construction: 1998, Condition: used, Max. saw blade diameter: 250 mm Manual material tensioner Bshx D Ngowf Ilrs Eswl

Condition: excellent (used), Year of construction: 1991, Saw blade diameter 1,020 mm Cutting range 90 degrees 600 x 320 mm -- MAX. IPE 600 Power 7.8 kW Miter cut 45/75 degrees Bwshxewglc Rs D Ng Eel Includes roller conveyors as shown in photos

Condition: good (used), Cutting range: Ø 55 mm, blade Ø: 200 mm Drive type: el./mech. drive: 0,75 kW, Bjhx D Nohtzcaeg Ejwl 400 V Remark: portable weight: 50 kg

Condition: excellent (used), Year of construction: 2000, saw band length: 5,620 mm, Fully automatic band sawing machine Fab. KALTENBACH Typ. KB 305 NA Year 2000 Bshx Dstdnm Nj Ng Eewl Technical data Make: Kaltenbach Type: KB 305 NA Year of manufacture: 2000 Voltage: 380 V, 50 Hz Saw blade: 5,620 x 34 x 1.1 mm Saw motor: 5.5 kW Total: 7.2 kW Dimensions (L x W x H): 3.4 x 2.10 (plus roller conveyor) x 1.80 m Weight (without accessories): approx. 3.1 t Working range: Round material: max. 305 mm Square: max. 305 x 380 mm Belt speed: infinitely variable 16 - 96 m/min. Equipment - several saw blades according to photos - NC control - Infeed - roller conveyor 2.1 m - Automatic material feed by means of gripper - chip conveyor - Hydraulic saw band feed - Documentation All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, diameter of saw band: 350cutting area - round: 350cutting area rectangle: 350 x 350total power requirements: 2,2 Used cold circular saw Kaltenbach SKL 350 Cutting Capacity at 90°: Round: Up to 135 mm Square: Up to 120 mm Flat: Up to 70 x 280 mm Cutting Capacity at 45°: Square: Up to 105 mm Flat: Up to 55 x 210 mm Bohxov Ncpbe D Ng Eowl Saw Blade Speeds: 2,250 and 4,500 rpm Motor Power: 5/6 hp (approx. 3.7/4.5 kW) Weight: Approx. 650 kg Dimensions (L x W x H): Approx. 1,200 x 1,200 x 1,500 mm

Condition: good (used), Year of construction: 1997, Functionality: fully functional, For sale is a Kaltenbach cold circular saw. Bjhx D Nowg Ttwsg Ejwl Gearbox free of play! Type: KKS 450 E Saw blade Ø: 450 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Fast forward/reverse: 1,550 mm/min Max. working range: 150 mm Working range square material: 140 mm Working range flat material: 330x40 mm Working range round material: 140 mm Working range min.: 10 x 10 mm 150 Mitre range: 0° - 90° - 0° Dimensions LxWxH: 1,080 x 900 x 1,760 mm Weight: 1000 kg Inspection / collection in 89558 Boehmenkirch Shipping possible on request Forklift available for loading.

Year of construction: 2009, Condition: used, machine/vehicle number: 0301-230036, Kaltenbach drill saw system as a combination for use in light to heavy steel construction. With this Kaltenbach system, steel profiles can be drilled, center-punched and sawn to length in a single operation. Rolled profiles such as double T-steel, T-steel, U-steel, angle steel, hollow profiles and flat steel are processed here. The Kaltenbach drilling unit has an automatic tool changing device on three drilling spindles for five tool sizes each. The tools are positioned with high precision using ball screws and servomotors. The entire system is equipped with a length measuring device. Technical information KDXS 1215 drilling machine: - Working area min. 80 x 65 x 10 mm - Working area max. 1200 x 450 mm - 3 drilling units (vertical Y-axis, horizontal Z- and W-axis) each 11.0 kW frequency-controlled: 33.0 kW - Automatic tool changer (3x5) - Frequency-controlled drive power 78 kW - Working height 640 mm - Machine dimensions 6100 x 1300 x 3730 mm (LxWxH) - CNC control with Profiline 3 software Bjhx Dorr Sq No Ng Eowl Kaltenbach HDM 1432 High-performance circular saw as vertical saw with swivel bearing for high sawing performance of medium and heavy steel profiles, working area at 90° saw cut: 1200 x 450 mm, mitre adjustment for mitre cuts of -45°/90°/+35°, this circular saw system is equipped with a segment saw blade diameter 1430 mm. High cutting performance thanks to powerful drive NC-controlled cutting angle adjustment Feed via ball screw for ideal cutting results and short idle times

Condition: used, saw blade diameter 370 mm cutting diameter 115 mm capacity 90 degrees: flat 300 x 35 mm cutting speed 11 / 15 / 22 m/min Bwjhev Acihjx D Ng Esl total power requirement 1,4 kW weight of the machine ca. 850 kg dimensions of the machine ca. 1100 x 1100 x 1600 mm -The powerful, 2-stage gear was specially designed for cuts in solid material designed -The user has a total of 4 blade speeds for optimal adjustment the material available -The large bearing rotary table with internal table clamping and Precision stops at 0/45/60° ensure quick adjustability miter cuts -The vice with quick clamping (optional is a pneumatic one Vise = MA, available) is with screwed vise jaws Mistake. With their ribbing, these ensure optimal hold of the workpiece -Underframe with lockable door, chip drawer and removable Coolant pan with electric coolant pump -Chip removal brush

Condition: excellent (used), Year of construction: 1985, Machine number 52565, Cutting range: max. Ø 130 mm, Leaf Ø: 400 mm, Type of drive: el./mech., Drive: 3.0 kW / 400 V, Comment: with mobile base, Bjhef Ar T Rjx D Ng Ejwl Weight: 200 kg

Condition: not inspected (used), Year of construction: 2001, Functionality: unexamined, saw blade diameter: 400 mm, cutting capacity: 125 mm, cutting range round at 90°: 120 mm, RKS 450 NA automatic straight-cut saw, HSS saw blades Cutting area 125 x 125 mm Suitable for pipes and solid material Automatic material feed, hydraulic clamping, freestanding hydraulic unit This machine is a trade-in and has not been tested. This is a used machine whose functionality has not been tested. The sale is subject to exclusion of any warranty. Bwehewgitmex D Ng Ejl

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, Kaltenbach KKS 400 E Underfloor Circular Saw Manufacturer: Kaltenbach Type: KKS 400 E Year of manufacture: 2008 Condition: used, cleaned, and tested Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20, 13/26, 15/30 m/min Bwshx D Ngswbqlao Esl Feed rate: 0 – 1,000 mm/min Rapid forward/reverse speed: 1,550 mm/min Maximum working area: 130 mm Working area for square material: 120 mm Working area for flat material: 305 x 20 mm Working area for round material: 130 mm Minimum working area: 10 x 10 mm Miter range: 0° – 90° – 0° Dimensions (L x W x H): 1,080 x 900 x 1,760 mm Weight: approx. 900 kg Scope of delivery: – 3 m discharge roller conveyor with manual material stop – 2 used saw blades

Condition: refurbished (used), Year of construction: 2001, A Kaltenbach cold circular saw is for sale. The machine has been completely disassembled and rebuilt. During the overhaul, the gearbox, motor, and hydraulics were overhauled. The table bearings were re-mounted. Gearbox is backlash-free! Type: KKS 450 E Bshx Dswg Ttqs Ng Eswl Saw blade diameter: 450 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20, 13/26, 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid forward/reverse speed: 1,550 mm/min Maximum working area: 150 mm Working area for square material: 140 mm Working area for flat material: 305 x 20 mm Working area for round material: 140 mm Minimum working area: 10 x 10 mm Miter range: 0° - 90° - 0° Dimensions (L x W x H): 1,080 x 900 x 2,060 mm Weight: 1,000 kg Viewing/pickup in 89558 Boehmenkirch Shipping available upon request Forklift available for loading.

Condition: used, Year of construction: 2008, machine/vehicle number: 0702-240017, Cross transfer tables as a chain drag system for the cross transport of sectional steel in steel construction and steel trade. These sturdy cross transfer tables were used on a Kaltenbach bandsaw line and are in very good condition. Bwehx D Njr Rddweg Eol 5 pieces of overhauled cross drags as chain drag system with antitrailing bar for discharge side, incl. 1 x motor and 4 x shafts, length 3300 mm, height 600 mm,

Condition: good (used), Kaltenbach cold circular saw KKS Maschnr.6995Saegeblatt Ø 350 mm-speed 130 m/min-weight total 1200 kg Bwohx Dod Tp Nle Ng Ejl

Condition: good (used), Year of construction: 1997, Semi automatic Aluminium circular saw, blade Ø 350 mm, capacity Ø ca. 125 mm, motor 3,7 / 4,5 kw 2-speed 1420/2880 rpm, vertical clamp, stops 30°, 45°, 60° 90° double side, blade; dimension 100x115x155 cm, weight ca. 600 kgs Bwehx D Ngjtqfvyo Eol

Condition: refurbished (used), saw blade diameter: 360 mm, cutting range round at 90°: 100 mm, section length (min.): 300 mm, Fully automatic carbide circular saw machine type KMR 100 AP Refurbished to mint condition - available ex stock Working range: Round material 20 - 100 mm Square material 20 - 80 mm Bwjhx Dsh Uqpvo Ng Esl DRIVE PERFORMANCE Frequency-controlled saw motor 11.0 kW cuting speeds 20 - 150 m/min incl. Infeed magazine and sorting for trim cuts/rest pieces and good parts Suitable for cut off length up to 300 mm Cutting time for Ø 100 mm solid material 1.0037 approx. 7 seconds !!

Condition: used, saw blade diameter 350 mm cutting diameter 90 mm stroke 160 mm mitter cutting - all-position ± 45 ° voltage 380 V weight of the machine ca. 350 kg dimensions of the machine ca. 0,80 x 0,85 x 1,35 m Bwohx D Ngjd Il Azj Ejl - S/N: 4296 - pneumatic feed - coolant equipment

Condition: good (used), Sawcapacity at 90 degree: Round: Ø303 mm, Square WxH: 360 x 305 mm Sawcapacity at 45 degree: Round: Ø265 mm, Square WxH: 265 x 300 mm Sawcapacity at 30 degree: Round: Ø175 mm, Square WxH: 175 x 300 mm Behx D Nougtqreg Eowl Sawingspeed: 20 - 90 m/min. Sawbelt dimensions: 3830 x 25 x 0,9 mm, 3850 x 27 x 0,9 mm Workingheight: 700 mm Featured with: - Mitre sawing - Half automatic - Materialrollerconveyor ca. 8 meter - Machine manuals Country of origin: Germany Motor power: 1,1 kW Machine LxWxH: 2200 x 1250 x 1650 mm Machine weight: 780 kg

Condition: excellent (used), Year of construction: 2008, Manufacturer: KALTENBACH Type: KBC 350 NA Year of production: 2008 Dimensions (WxHxD): approx. 220x200x150 cm, with chip conveyor, 3 roller conveyors Dimensions: (WxHxD): approx. 220x80x60 cm, 2 of them with storage table. We also offer: Bwehx Dot Ia Syo Ng Eol 1. Kaltenbach KMR 100 AP 2008 (304096) 2. Kaltenbach KBC 350 NA 2008 (304133) 3. Kasto SSB 260 VA-CNC 2002 (6510 115 305) 4. Kasto SBA 280 AU 1998 (6406 102 056) 5th Kasto HBA 420 AU 1985 6th Kasto HBA 420 AU 1995 (6019 107 306) 7th Kasto HBA 420 AU 1995 (6019 159 107) 8th Kasto, type SSB 260 VA, year of construction 1994

Year of construction: 1970, Condition: used, Metal circular saw KKS 350 Bwehehrzahsx D Ng Ejl Blade diameter 350 mm

Condition: refurbished (used), Year of construction: 1980, For sale is a Kaltenbach cold circular saw The machine has been technically and optically refurbished Gearbox naturally free of play! Type: KKS 400 H Saw blade Ø: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Fast forward/reverse: 1,550 mm/min Bwehx D Newffy Hjg Eel Max. working range: 130 mm Working range square material: 120 mm Working range flat material: 305 x 20 mm Working range round material: 130 mm Working range min.: 10 x 10 mm Mitre range: 0° - 90° - 0° Dimensions LxWxH: 1,080 x 900 x 1,760 mm Weight: 850 kg Inspection / collection in 89558 Boehmenkirch Shipping possible on request Forklift available for loading.

Condition: good (used), Year of construction: 2004, programmable saw with automatic feeder Bohx D Ngjn R Nnle Eowl good condition

Condition: used, saw blade diameter 370 mm cutting range round 115 mm cutting range square 105 mm cutting range flat 70 x 240 mm cutting length min. 730 mm cutting lenght max. 4000 mm saw blade turning speeds 1250 / 2500 U/min table rotating 180 ° stroke 120 mm feed stepless 0 - 500 mm/min coolant capacity 45 degrees: square 95 mm capacity 45 degrees: flat 50 x 200 mm cutting speed 1250 / 2500 m/min weight of the machine ca. 1,1 t dimensions of the machine ca. 5,00 x 1,30 x 2,00 m Double Mitre Saw for aluminium consits of two SKL 370 Circular Saws on common rails, one saw fixed one saw movable. - Serial No.: 28232 / 28233 - pneunatic clamping of workpiece - coolant equipment Bwehxsd Il A Io D Ng Eol

Condition: good (used), Semi-automatic cold circular sawing machine with roller table. Bshx D Neq U N Ryeg Eswl

Condition: excellent (used), Manufacturer: KALTENBACH Type: KMR 100 AP Year of manufacture: 2008 Bwehouu Aczox D Ng Eel Roller conveyor for removal and feeding of bars approx. 800 cm, with 3 safety light barriers.