Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 600 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 660 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of axes: 4, This 4-axis Matsuura H. Plus 405 was manufactured in 2006. It features an X-axis travel of 600 mm, Y-axis travel of 660 mm, and Z-axis travel of 660 mm, along with a 360° rotary B-axis. The machine has a maximum workpiece size of 700 × 850 mm and a tool changer capacity of 60 tools. If you are looking to get high-quality machining capabilities, consider the Matsuura H. Plus 405 horizontal machining centre we have for sale. Contact us for further details. • B-Axis: 360° rotary table • Rapid Traverse X/Y/Z: Up to 60 m/min • Pallet Size: 500 × 500 mm • Maximum Workpiece Size: 700 × 850 mm • Maximum Workpiece Weight: 400 kg • Pallet Changer: 2-position • Main Spindle Speed: Max. 12,000 rpm • Tool Holder Options: SK40 / BT40 / HSK63 • Max Spindle Drive Power: 15 / 22 kW • Maximum Spindle Torque: 187 Nm • Tool Changer Capacity: 60 tools • Chip-to-Chip Time: Approx. 3.5 sec. Bedszwp S Ujpfx Agtjwt Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2014, operating hours: 36,057 h, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, controller manufacturer: FANUC, controller model: Series 32i-Model A, total height: 2,735 mm, table width: 400 mm, table length: 400 mm, overall weight: 11,000 kg, spindle speed (max.): 15,000 rpm, This TOYODA FH 400 J Horizontal Machining center was manufactured in the year 2014 in Japan and has 36057 production hours. It is equipped with a Fanuc Series 32i-Model A control unit. The machine has a spindle speed of 15000 rpm. Machine Benefits Technical Machine Benefits • 75 bar high pressure pump and a knoll 1. 200l emulsion tank. • Tool-to-tool cycle time of 0. 9 seconds, and a rapid feedrate of 60 m/min. Dimensions Machine Depth 4205 mm Bodpfx Aezwpiyegtswt

Condition: used, Year of construction: 2006, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 12.000 1/min tool taper: SK 50 control: SIEMENS 840D shopmill tool change unit: 240 fach size of pallet: 630 x 630mm mm spindle: 52 kW / 430Nm total power requirement: 87 kVA weight of the machine ca.: 15 t horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, Bwjdpfx Agopumdcjtet tool-breakage control (mech.), MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours *

Condition: used, Year of construction: 2010, machine/vehicle number: IntNr231656, HAAS DT-1 CNC machining center – manufactured in 2010 For sale is a HAAS DT-1 CNC machining center, manufactured in 2010, equipped with a 3+2-axis system, a Renishaw measuring probe, and a KUKA KR 5 sixx R850 WP. Technical data Manufacturer: Haas Model: DT-1 Year of manufacture: 2010 Machining: 3+2-axis Bsdpfxszwk Iwe Agtswt Cycle time: 4,962 h Feed time: 3,079 h CNC control: Haas Chip conveyor: Integrated screw conveyor system Measuring probe: Renishaw Internal cooling (IKZ): present, currently defective Automation – KUKA KR 5 sixx R850 WP, control panel currently defective Dimensions of the robot cell Height: approx. 2,100 mm Width: approx. 1,150 mm Depth: approx. 800 mm Dimensions including infeed and outfeed Height: approx. 2,100 mm Width: approx. 1,150 mm Depth: approx. 2,400 mm The machine can be inspected on-site by appointment. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: good (used), Year of construction: 2007, travel distance X-axis: 750 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 725 mm, CNC control Sinumerik 840D NC-rotary table B-axis automatic tool changer for 320 tools pallet changing device, 2 pallets 500 mm x 500mm coolant through spindle device IKZ (80 bar) chip conveyor coolant device Technische Daten / technical details: X-Weg längs / X-travel longitudinal 750 mm Y-Weg senkrecht / Y-travel vertical 750 mm Z-Weg quer / Z-travel cross 725 mm B-Achse / B-axis 360 ° Spindelaufnahme / spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 50-10000 Upm /rpm Werkzeugplätze / tool places in changer 320 Vorschub / infeed 60000 mm/min Eilgang / rapid feed 60 m/min Antriebsleistung Spindel 40/100% ED / drive capacity spindle 40/100%ED 37/24 kW Gewicht der Maschine ca. / weight ca. 15000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Bodpoq Ui Hqofx Agtswt

Condition: used, Year of construction: 2008, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, spindle speed (max.): 24,000 rpm, Order no. 5.3-745 1 used Horizontal Milling Center Heckert HEC 400D, built 2008 1 used Horizontal Milling Center Heckert HEC 400D, built 2008 CNC control Sinumerik 840D NC rotary table B-axis Magazine for 80 tools Pallet changing device, 2 pallets 400mm x 400mm Internal coolant supply IKZ chip conveyor Coolant device CNC control Sinumerik 840D NC-rotary table B-axis automatic tool changer for 80 tools pallet changing device, 2 pallets 400 mm x 400mm coolant through spindle device IKZ chip conveyor coolant device Technische Daten / technical details: X-travel longitudinal 650 mm Y-travel vertical 650 mm Z-travel cross / Z-travel cross 680 mm Bwjdpsrairwsfx Agtet B-axis / B-axis 360 ° Spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 24000 Upm /rpm Werkzeugplätze / tool places in changer 80 Gewicht der Maschine ca. / weight approx. 13000 kg Technical data, accessories and description of the machine are not binding - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Model: BAW06-22 Year of manufacture: 2018 Machine No.: 2080519 Control: Siemens SINUMERIK Machine type: CNC horizontal twin-spindle machining center Country of origin: Germany Technical Data Working travels: X-axis: 600 mm Y-axis: 600 mm Z-axis: approx. 400–500 mm* Number of machining spindles: 2 Spindle arrangement: horizontal, twin spindle Spindle distance: 600 mm Maximum spindle speed: 17,500 rpm Tool holder: HSK-A63 Spindle power: up to 2 x 35 kW* Spindle torque: up to 2 x 80 Nm* Rapid traverse X/Y/Z: up to 100 m/min* Automatic tool changer: Yes Tool magazine: up to 84 positions / 2 x 42 tools* NC rotary/swivel workholding system Automatic workpiece changing/loading system Automation / Equipment Industrial robot for automatic loading and unloading Complete safety enclosure Automatic workpiece handling system NC-controlled rotary/swivel workholding Twin-spindle simultaneous machining Automatic tool changer KNOLL coolant filtration system High-pressure coolant system Chip evacuation system Central coolant supply Siemens operator panel CE marking Electrical Data Operating voltage: 3/PE / 400 V / 50 Hz Full-load current: 190 A Bsdpjzypmqefx Agtowt Pre-fuse: 200 A Pneumatic pressure: 7.0 bar Air consumption: 1.0 Nm³/min Electrical diagram No.: 205-000-20678-97 Weight Machine weight: approx. 16,000 kg Nameplate specification: 160 kN Description SW BAW06-22 CNC horizontal twin-spindle machining center, manufactured in 2018. The machine is designed for highly productive simultaneous machining with two horizontal machining spindles. Equipped with Siemens SINUMERIK CNC control, HSK-A63 spindle interface, high-speed spindles up to 17,500 rpm, automatic tool changing system and NC-controlled rotary/swivel workholding. The machine is integrated into an automated production cell with industrial robot for automatic workpiece loading and unloading. The machine is additionally equipped with a KNOLL coolant filtration system, high-pressure coolant supply, chip management system and complete safety guarding. Made in Germany.

Condition: ready for operation (used), Year of construction: 2001, controller manufacturer: SIEMENS, controller model: 840, overall weight: 11,500 kg, number of axes: 5, This 5-axis Gleason PFAUTER G320 CNC + Promot Automation was manufactured in 2001. It features a Siemens 840 control unit, a maximum workpiece diameter of 380 mm, and a module range of 0.5-7.0. The system includes Promot Automation handling, a robotics system, and a cooling belt system. If you are looking to get high-quality gear grinding capabilities consider the Gleason PFAUTER G320 CNC machine we have for sale. Contact us for more information about this machine. • Operator panel: included • Module range: 0.5–7.0 • Workpiece diameter: min 10 mm, max 380 mm • Number of teeth: 10–600 • Axis travels: Z (vertical) 200 mm; X (horizontal) 230 mm; Y (tangential/shift) 135 mm • Clamping head swivel (A): ±45° Bwedoyf E R Djpfx Agtjt • Tailstock stroke: 125 mm • Dressing travels: V (tangential) 180 mm; U (radial) 110 mm • Grinding wheel speed: up to 3000 rpm, stepless • Linear axis speed: 10,000 mm/min • Max. table rotation speed: 240 rpm • Table resolution: 0.001° • Feeds: machining and working feeds stepless • Grinding wheel dimensions: diameter 270–350 mm; width up to 104 mm; bore 160 mm • System weight: approx. 11,500 kg • Space required (machine): approx. 3.7 m × 2.4 m × 2.75 m Additional equipment • Promot Automation handling unit (robotics handling) • Operator panel/handheld (for automation) • Conveyor belt • Cooling belt system • Hydraulic unit • Space required (automation): approx. 4.5 m × 1.6 m × 4.0 m

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 700 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 980 mm, controller manufacturer: OKUMA, controller model: OSP-E100M, total height: 3,280 mm, overall weight: 21,000 kg, spindle speed (max.): 20,000 rpm, number of axes: 4, This Okuma MA-500HA was manufactured in 2004. A robust horizontal machining centre, it features a spacious X-axis travel of 700mm, Y-axis of 900mm, and Z-axis of 980mm. It includes a high-speed spindle capable of 20000 RPM and an efficient through coolant pump. For more information about this horizontal machining centre, please reach out to us. Machine Benefits Technical Machine Benefits • High spindle speed of 20000 rpm • Comprehensive control system with okuma osp-e100m • Robust construction with a weight of 21000 kg Dimensions Bjdpfxszvvz Hs Agtowt Machine Depth 3080 mm Technical Specification Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 450 mm, travel distance Z-axis: 450 mm, total height: 3,000 mm, overall weight: 22,000 kg, spindle speed (max.): 16,000 rpm, tool weight: 8,000 g, This SAMAG MFZ 2-2 was manufactured in 2006. A robust horizontal machining centre, it features a power rating of 72 kW and operates on a 400V mains voltage with a 50 Hz frequency. Weighing 700 kg, it includes optional 3D data for clamping towers and spare parts. Consider the opportunity to buy this SAMAG MFZ 2-2 horizontal machining centre. Contact us for more information. • Tool storage • Type: Decagon • Number of storage locations: 100 (2x50) • Number of cassettes: 10 • Cassette locations: 10 • Cassette pitch: 90 mm • Max. cassette magazine speed: 8.3 min • Delay time from max. cassette magazine speed to standstill: 300 ms • Max. tool load mass: 280 kg • Max. tool weight (plastic collet): 6 kg • Max. tool weight (steel collet): 8 kg • Max. tool diameter with free adjacent locations: 160 mm • Rotation axis: 10x36 • Time to change from the nearest cassette (left/right): 1.5 s • Tool change on the spindle (avg. chip-to-chip without wheel rotation, VDI 2852): 4.5 s • Axes and travel paths • Travel paths: Y (vertical) working stroke 500 mm; Y (vertical) total stroke incl. tool change 775 mm • Axis acceleration (X/Y): 0.6 xg, 0.8 xg • Main spindle drive • Spindle unit: GMN high-frequency spindle HCS 220-16000/28 • Spindle spacing: 450 mm • Sleeve diameter: 220 mm • Spindle unit weight: 110 kg • Drive motor: 1FE1 083-4WN11-1BA2 • Torque (S1): 65 Nm • Torque (S2): 74 Nm • Workpiece carrier unit (W-axis swivel unit) • Swivel time 180°: 4.5 s • Faceplate/counterbearing diameter: 500/345 mm • Drive/counterbearing speed (max.): 15/20 min • Mass moment of inertia: 140 kgm² • Permissible tilting moment: 8000 Nm • Permissible tangential moment (drive/counterbearing): 10,000/5,000 Nm • Locking force of Hirth gearing at 100 bar (drive/counterbearing): 190/175 kN • Workpiece holder A1/A2 axis • Parting angle: 3 • Swivel time 180°: 3.5 s • Faceplate/counterbearing diameter: 345 mm • Speed (max.): 20 min • Mass moment of inertia: 20 kgm • Permissible tilting moment: 3,000 Nm • Permissible tangential torque (drive/counterbearing): 5,000 Nm • Mains voltage: 400 V • Frequency: 50 Hz • Control voltage: DC 24 V • Power rating: 72 kW Additional equipment • Cooling lubricant system (chip management) • Type: Scraper belt conveyor • Dimensions (L x W x H): 2885 x 1095 x 1830 mm • Discharge height: 1020 mm Bedpfxjzvvntj Agtowt • Gap screen: 500 μm • Filling volume: 100 l • Wastewater pump: 380 l/min at 1.6 bar • Central cooling unit • Type: DK 160-V/SO • Cooling capacity: 1900 W • Min./Max. ambient temperature: 10/40 °C • Max. water outlet temperature: 20 °C • Condensation temperature: 40 °C • Refrigerant: R134a, 2 kg • Connected electrical power: 5.1 kW • Peripheral masses • Mass of clean water tank (empty): 930 kg • Mass of chip conveyor (empty): 450 kg • One slaughter machine (optional) • 3D data/CAD of the clamping tower (possibility for 3 clampings) (optional) • 2 replacement towers and spare parts package (optional) Dimensions Machine Depth 5500 mm

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 450 mm, travel distance Z-axis: 450 mm, total height: 3,000 mm, overall weight: 22,000 kg, spindle speed (max.): 16,000 rpm, tool weight: 8,000 g, This 3-axis SAMAG MFZ 2-2 was manufactured in 2007, featuring a line voltage of 400V, frequency of 50 Hz, and a control voltage of DC 24 V. With a power consumption of 72kW and a weight of 700kg, it includes optional 3D data of the clamping tower. Consider the opportunity to buy this SAMAG MFZ 2-2 horizontal machining centre. Contact us for more information about this machine. • Tool storage • Type: Decagon • Number of storage locations: 100 (2x50) • Number of cassettes: 10 • Cassette locations: 10 • Cassette pitch: 90 mm • Max. cassette magazine speed: 8.3 min • Delay time from max. cassette magazine speed to standstill: 300 ms • Max. tool load mass: 280 kg • Max. tool weight/plastic collet: 6 kg • Max. tool weight/steel collet: 8 kg • Max. tool diameter with free adjacent locations: 160 mm • Rotation axis: 10x36 • Time to change from nearest cassette (left/right): 1.5 s • Tool change on spindle, average chip-to-chip (VDI 2852), without wheel rotation: 4.5 s • Axes and travel paths • Travel paths • Y-axis (vertical) working stroke: 500 mm • Y-axis (vertical) total stroke incl. tool change: 775 mm • Axis acceleration X/Y: 0.6 xg / 0.8 xg • Main spindle drive • Spindle unit: GMN high-frequency spindle HCS 220-16000/28 • Spindle spacing: 450 mm • Sleeve diameter: 220 mm • Weight: 110 kg • Drive motor: 1FE1 083-4WN11-1BA2 • Torque (S1): 65 Nm • Torque (S2): 74 Nm • Workpiece carrier unit • W-axis swivel unit • Swivel time 180°: 4.5 s • Faceplate/counterbearing diameter: 500/345 mm Bjdpfx Agjzvvnmstowt • Drive/counterbearing speed (max.): 15/20 min • Mass moment of inertia: 140 kgm² • Permissible tilting moment: 8,000 Nm • Permissible tangential moment of drive/counterbearing: 10,000/5,000 Nm • Locking force of Hirth gearing at 100 bar/counterbearing: 190/175 kN • Workpiece holder A1/A2 axis • Parting angle: 3 • Swivel time 180°: 3.5 s • Faceplate/counterbearing diameter: 345 mm • Speed (max.): 20 min • Mass moment of inertia: 20 kgm • Permissible tilting moment: 3,000 Nm • Permissible tangential torque drive/counterbearing: 5,000 Nm • Line voltage: 400 V • Frequency: 50 Hz • Control voltage: DC 24 V Additional equipment • Cooling lubricant system (scraper belt conveyor) • Dimensions (L x W x H): 2885 x 1095 x 1830 mm • Discharge height: 1020 mm • Gap screen: 500 μm • Filling volume: 100 l • Wastewater pump: 380 l/min at 1.6 bar • Central cooling unit • Type: DK 160-V/SO • Cooling capacity: 1900 W • Min./Max. ambient temperature: 10/40 °C • Max. water outlet temperature: 20 °C • Condensation temperature: 40 °C • Refrigerant: R134a, 2 kg • Connected electrical power: 5.1 kW • Clean water tank (empty): 930 kg • Chip conveyor (empty): 450 kg Dimensions Machine Depth 5500 mm

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 1,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 850 mm, controller manufacturer: FANUC, controller model: oi-MD, total height: 3,362 mm, table load: 1,000 kg, overall weight: 23,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 22,000 W, tool weight: 8,000 g, number of axes: 4, This 4-axis SPINNER H630 horizontal machining center was manufactured in 2012. Ideal for precision engineering, it offers robust construction and reliability for various machining tasks. Consider the opportunity to buy this SPINNER H630 horizontal machining center. Contact us for more information. Machine Benefits Technical Machine Benefits • Torque max (nm): 139 / 164 or 556 / 656 • Connected load: 42 kva • Table size: 2 x 630 x 630 mm • Height top edge of table (from floor): 993 mm • Clear width of door opening: 1200 mm Bwedpfxezvvkzj Agtst • Table holes: m16 • Tool to tool: 5 seconds • Standard double arm changer Extra Information Machine still under power Dimensions Machine Depth 5970 mm

Condition: excellent (used), Year of construction: 2011, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 565 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, total height: 2,700 mm, total length: 4,000 mm, total width: 2,400 mm, table width: 400 mm, table length: 400 mm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 6,383 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Offered here is a horizontal machining center from the manufacturer Doosan. Operating hours: 11,320 h Spindle hours: 6,383 h The machine is in very good condition and can be inspected under power in our facility. Both clamping towers are included in the scope of delivery. Bwjdpfjyl Iu Ejx Agtst Manufacturer: Doosan Model: HC 400 Year of manufacture: 2011 Control: Fanuc Series 32i-MODEL A Technical data: Travel X-Y-Z: 600x560x565 mm B-axis: 1° increment (indexing table) Rapid traverse X-Y-Z: 40 m/min Feed rates: 20,000 mm/min Pallet size: 400x400 mm Spindle speed: 8,000 rpm Tool holder: SK40 Machine weight: 11,000 kg

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,350 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, controller manufacturer: Mori Seiki (Fanuc), controller model: MSX-701 (Fanuc 31i), workpiece height (max.): 1,450 mm, workpiece diameter (max.): 1,450 mm, workpiece weight (max.): 2,200 kg, total height: 3,850 mm, total length: 7,200 mm, total width: 4,300 mm, spindle speed (max.): 8,000 rpm, coolant supply: 70 bar, type of input current: AC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Offered here is a machining center from the manufacturer Mori Seiki. The machine is fully functional, in good condition, and can be inspected and tested at our facility. Manufacturer: Mori Seiki Model: NH8000 DCG Year of manufacture: 2008 Control unit: MSX 701-III Technical specifications: Travel distances X-Y-Z: 1400 x 1200 x 1350 mm B-axis: 0.001° Feed rate X, Y, Z: 50,000 mm/min Rapid traverse X, Y, Z: 50 m/min Bjdpfx Aeyrdn Ujgtjwt Pallet size: 800 x 800 mm Number of pallets: 2 Pallet change time: 16 s Max. workpiece weight: 2200 kg Max. workpiece diameter: 1450 mm Max. workpiece height: 1450 mm Spindle speed: 8000 rpm Spindle power: 37 kW Tool holder: HSK-A100 Tool magazine: 60 positions Tool change time: 1.9 s Distance between pallet surface and spindle center: 100–1300 mm Distance between pallet center and spindle nose: 100–1450 mm Total power consumption: 86 kVA Machine dimensions: approx. 7200 x 4300 x 3850 mm Transport dimensions machine: approx. 7000 x 3400 x 3300 mm Machine weight: approx. 30 t Total weight incl. magazine and accessories: approx. 37 t Scope of delivery includes: 1x Mori Seiki NH8000 DCG machine 1x Matrix tool magazine 1x chip conveyor 1x coolant system 1x transformer Various tool holders

Condition: ready for operation (used), Year of construction: 2015, CNC Control: F31iA X mm: 560 Y mm: 560 Z mm: 630 B mm: 360.000 Table load capacity kg: 400 Bsdszu Tryopfx Agtewt Cutting feed rate mm/min X, Y, Z: 50,000 Maximum rapid traverse rate m/min X, Y, Z: 50 Spindle speed rpm: 14,000 Spindle power kW: 18.5 Taper type: ISO-40 Torque Nm: 120 Tool changer type: Chain Number of positions in tool changer: 60 Maximum tool diameter: mm 70 Maximum tool diameter with adjacent positions empty: 140 Maximum tool length mm: 400 Maximum tool weight kg: 8 Coolant tank capacity l: 500 Through-spindle coolant: Yes

Condition: used, Year of construction: 2003, Technical details: x-travel: 450 mm y-travel: 450 mm z-travel: 450 mm b-axis: 360.000 x 0.001 ° main spindle speeds:: 45-10000 1/min weight of the machine ca.: 14 t dimensions of the machine ca.: 7 x 2.45 x 3.4 m size of pallet: 320 x 320 mm number of spindles: 2 tool taper: HSK63 tool numbers: 2 x 40 spindle drive motor: 25/36 (100% / 40% ED) kW Double spindle 4-axis machining center Horizontal 4 machine plates Renishaw probe Control Siemens Sinumerik 840D Working space (X / Y / Z): 450x450x450 mm Load pallet / table max .: 300 kg Acceleration: 10 m / s² Rapid traverse: 60 m / min Pallet size: 320 x 320 mm Chip-to-chip time: 2.6 s Workpiece height max .: 700 mm Tool holder: HSK 63 Tool places: 2x 60 Tool spindle: 10,000 rpm, 95 Nm Speed ??increase to 18,000 rpm Infrared receiver for probe, Make Renishaw Vaf72a0p Tool magazine with 60 places Control panel on the workstation Control panel on the tool installation site Workpiece positioning stations can be rotated manually with hydraulic workpiece clamping 60 bar Pneumatic support control on the workstation Automatic swing gate Extended coolant layer 70 bar / 1500I / VF 250 Coolant Cooler Working space flushing Emulsion mist suction Roto - Clear Automatic setup process Automatic disarming process Runtime and quantity recording Status lamp 3-color modem for remote diagnosis control cabinet lighting * Bwsdpjw Ng D Hsfx Agtet

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, table width: 1,270 mm, table length: 1,400 mm, table load: 4,535 kg, overall weight: 20,800 kg, spindle speed (max.): 7,500 rpm, CNC Haas with 15-inch LCD screen Table size: 1400x1270 mm Maximum table load: 4,535 kg Bedpfx Agjypv T Retswt Spindle ISO 50, power 22.4 kW Maximum spindle speed: 7,500 rpm Travels: 1626x1270x813 mm 50-position tool changer Chip conveyor Weight: 20,800 kg

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, CNC Machining Centre – Horizontal | Brand: HÜLLER HILLE | Type: nbh 170R Year of manufacture: 2005 The machine can be inspected under power by prior appointment. Condition: In working order / ready for operation. TECHNICAL SPECIFICATIONS: Working area - X/Y/Z axes: 1.000/800/800 mm - Workpiece swivel range within the working area: Ø 900 mm - Distance from table centre to spindle nose in Z: 138.9 (HSK-A 100) mm Position measurement system - Encoder scales: direct (measurement method) - Position uncertainty A according to DIN ISO 230-2: 0.007 mm 180-degree pallet changer with 4 x 90-degree pallet rotators Pallet - Pallet clamping surface to DIN 55201, Form A2: 500 x 630 mm - Transport load per pallet: approx. 0,8 tons - Height of the system: 1.100 mm NC rotary table (B-axis) - Smallest incremental step: 0,001 degrees - Repeatability: ± 0,001 degrees - Accuracy across all positions: ± 0,002 degrees - Permissible torques on the clamped table: * Tangential torque: max. 7.000 Nm * Tilting moment: max. 16.000 Nm - Clamping forces: * on the table: 147.000 Nm * on the pallet: 84.600 Nm Working spindle / gear head - Tool holder to ISO 12164 (DIN 69893): HSK-A 100 - Diameter at front bearing: 100 mm - Drive power 100% duty cycle/60% duty cycle: 37/46 kW - Speed range: 25 – 10.000 rpm Feed / Feed force / Rapid traverse: - Feed range X/Y/Z axes: 1 – 60.000 mm/min - Feed force on X/Y/Z axes, 25% duty cycle: approx. 15.000 N - Rapid traverse speed, X/Y/Z axes: 60 m/min - Rapid traverse, rotary table: 30 rpm Bwjdpfxszviais Agtet - Acceleration: approx. 6 m/s² - Ball screw (pitch): Ø 50 (30) mm Tool magazine for 4 magazine cassettes, including two additional magazine cassettes. Electrical - Rated power: 74 kVA Compressed air Coolant system, make: KNOLL The internal coolant supply can be switched to compressed air. - Coolant pump 20–70 bar - Coolant tank, 2.500 l Machine layout - Space requirements, L x W x H: approx. 8 x 3.5 x 3.5 m - Weight: approx. 24 tons ACCESSORIES / EQUIPMENT: - Control system: Siemens SINUMERIK 840D ADDITIONAL EQUIPMENT FOR AUTOMATED MANUFACTURING PALLET STORAGE SYSTEM Technical data sheet with full details, including information on the wide range of features, available on request. No guarantee is given as to the completeness or accuracy of the technical specifications and specifications. – Subject to prior sale –

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, * Mori Seiki NMV 5000 DCG. * Year: 2008. * Equipment value, including zero points, chucks, BT taper chucks, turning tool chucks, and pallets: 50,000–55,000 euros. * 5-axis continuous machining center. * High-precision Heidenhain linear guides. * Interface for connecting a pallet loader and robot. * Table with turning function. * Independent high-pressure cooling system at 40 bar. * Spindle oil cooling system. * BT 40 tool magazine. * Magazine capacity: 60 tools. * Maximum tool diameter: 125 mm. Bwodpfezxm Icjx Agtet * Maximum tool length: 300 mm. * Maximum tool weight: 8 kg. * Travel on the X-axis: 730 mm. * Travel on the Y-axis: 510 mm. * Travel on the Z-axis: 510 mm. * Table with turning function. * Maximum workpiece diameter in turning mode: 450 mm. * Maximum turning diameter in turning mode: 700 mm. * Mori Seiki Mapps 4 conversational control. * Spindle speed: 20,000 rpm. * Spindle motor power: 18.5 / 15 kW. * Maximum cutting torque: 135 Nm. * C-axis table: 360,000 x 0.001 * B-axis rotation: +160 / -180 * Rapid traverse X/Y/Z: 50 / 50 / 50 m/min * Renishaw tool measurement system. * Renishaw workpiece measurement system. * Automatic zero-point adjustment. * Automatic cutting power control. * Program memory: 2 MB. * Dynamic zero-point correction (up to 8 points). * Pre-check of tool availability. * Custom macro (999 variables). * Rear chip conveyor. * Tool life management (128 x 2 groups). * Electrical transformer. * Documentation, parts list, electrical diagrams, programming, and instruction manual. * Weight: 13,500 kg. * Machine is currently in operation. * Available for inspection by an authorized Mori Seiki technician. * Immediate delivery, subject to immediate sale.

Condition: ready for operation (used), Year of construction: 1997, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 1500 mm Y-AXIS TRAVEL: 1200 mm Z-AXIS TRAVEL: 1250 mm SPINDLE: 10-4000 rpm; 40 kW; HSK-A 100 PALLET: CONTINUOUS ; 1000X1000 mm; 1-500 rpm Bwedpfsh Hfrnjx Agtst MAX ADMITTED LOAD: 2000 Kg TOOL MAGAZINE: CHAIN-TYPE ; 161 POS CONTROL UNIT: SIEMENS 840 C OVERALL DIMENSIONS: 8500 x 4800 x 4800 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER NOTE: COMPLETELY OVERHAULED MACHINE; HORIZONTAL AND VERTICAL AUTOMATIC HEAD; TURNING TABLE

Condition: used, Year of construction: 2003, x-travel 800 mm y-travel 600 mm z-travel 805 mm Control Sinumerik 840D weight of the machine ca. 13 t 1 horizontal machining centre Make: HECKERT Bedpfxeuddgfs Agtewt type: CWK 500D year 2003 serial no. 16087 control, make: Siemens, type: Sinumerik 840D travel X/Y/Z 800 x 600 x 805 mm 2-fold pallet changer pallet size 500 x 500 mm NC-rotary table 360 x 0,001° 60-fold tool changer, tool holder HSK 63 Speed max. 15,000 rpm IKZ 50 bar Operating hours 32,450 Spindle hours 6.080 Accessories: Coolant temperature control, belt filter, chip conveyor, spindle cooling, Infrared probe preparation

Condition: good (used), Year of construction: 2011, Tool holder: HSK 63 Turning spindle: 85 Spindle speeds: 20,000 rpm Chain magazine: 60 positions Table size: 400 x 500 mm Bjdpfxezxx Dpo Agtswt Table load: 500 kg Chip conveyor Pallet changer Coolant filtration system KS high-pressure system through the spindle

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,020 mm, controller model: Pro 5, table load: 1,200 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,900 h, coolant supply: 40 bar, spindle nose: HSK100, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, Very well-maintained machine with a low number of operating hours. The machine was purchased and installed in 2013. IKZ 40 bar and air. Tool center point control, tilted workplane, Die & mold package, extended memory, extra zero points. Lots of accessories, pallets, cubes, vises, HSK holder, shrink holder. Ca. 125 pices. Zoller for tool measurements. Bwodpfxjzw Efko Agtot

Condition: used, Year of construction: 2020, controller manufacturer: Siemens, controller model: 840 Dsl - GROB4Pilot, _____ Description: Year of manuf. : 2020 Control : Siemens 840 Dsl - GROB4Pilot Speed : 16000 rpm Movement X/Y/Z : 1050/800/1050 mm Bwodezu H Afspfx Agtst Tool holder : HSK 63 In General: Year of manufacture:2020 Control system:Siemens 840 Dsl – GROB4Pilot Travel ranges X/Y/Z:1,050/800/1,050 mm Speed:16,000 rpm Tool holder:HSK 63 Fluid supply:coolant + blast air Spindle: Technology:Direct drive spindle Speed:16,000 rpm Max. torque:206 Nm Max. power:32 kW Tool holder:HSK 63 NC rotary table: Technology:NC rotary table with pallet clamping system B-axis:0.001° Pallet size:630 x 800 mm (630 x 630 mm) Fluid connections:6 Tool magazin: Technology:4-disc magazine Number of stations:237 Tool changer:Pick-up Tool cleaning:Mechanical Equipment: Position measurement systems:Direct on all axes (glass scales) Chip removal:Chip conveyor Coolant supply:Internal coolant system, 80 bar Hydraulic clamping:4 clamping circuits, 30–190 bar Support control:Pneumatic Touch probe:Renishaw OMP 60 Tool measurement:Length measurement Set-up bay door:Can be operated automatically or manually Emulsion mist separator:Mechanical Pallets I:2 pieces 630 x 800 mm Pallets II:2 pieces 630 x 630 mm

Condition: used, Year of construction: 1999, Technical details: x-travel: 630 mm y-travel: 630 mm z-travel: 630 mm control: Unipro 90 Pallet changer 2x: 400 x 500 workpiece - installed height: 800 mm max. clampable workpiece diameter: 720 - 850 mm spindle taper:: SK 40 spindle turning speed - stepless: 10 - 8000 1/min Spindle power: 20 / 30 kW Spindle Torque: 95/143 Nm tool magazin:: 80 SK 40 total power requirement: 55 kW weight of the machine ca.: 11 t Machine with Unipro 90 control for 5 axis - twin palette changer - tool magazine 80 HSK-A 63 Bodpey Rmk Rsfx Agtowt - coolant device with coolant through spindle 7 pressure levels - full A & B-axis - chip conveyor *