Used Doosan for sale (294)

Condition: excellent (used), Year of construction: 2019, Doosan Puma TT2100SYY Mfd. 2019 Tooled as pictured Specifications SWING OVER BED 9.05" MAX CUTTING DIAMETER 9.05" DISTANCE BETWEEN CENTERS 38.5" X-AXIS TRAVEL 6.5" Y-AXIS Yes Y-AXIS TRAVEL 3.93" Z-AXIS TRAVEL 27.5" C-AXIS INDEXING FULL CONTOURING C-AXIS CHUCK SIZE 8" BAR CAPACITY 2.625" SPINDLE NOSE A2-6 SPINDLE MOTOR 35 hp SPINDLE SPEED 5,000 RPM RAPID TRAVERSE RATE - X-AXIS 1,181 in/min. RAPID TRAVERSE RATE - Z-AXIS 1,575 in/min. SUB SPINDLE Yes SUB SPINDLE - CHUCK SIZE 8" SUB SPINDLE - BAR CAPACITY 2.56" SUB SPINDLE - SPINDLE NOSE A2-6 SUB SPINDLE - SPINDLE MOTOR 25 hp SUB SPINDLE - SPINDLE SPEED 5,000 RPM SUB SPINDLE / W-AXIS TRAVEL 28.7" TURRET CAPACITY 12 TURRET TYPE BMT55 LIVE MILLING Yes LIVE MILLING SPEED 5,000 RPM LIVE MILLING MOTOR 10 hp TURRET 2 CAPACITY 12 TURRET 2 - X-AXIS TRAVEL 6.5" TURRET 2 - Z-AXIS TRAVEL 27.56" Dimensions 93" X 153" (W/CONVEYOR - 186") X 88.6"H Weight 20,940 LBS Equipped With FANUC OiTF CNC CONTROL Iaedpfxsw Dvnxe Abnsp DOOSAN EZ GUIDE i PROGRAMMING TWIN 12 POSITION TURRETS UPPER AND LOWER, W/24 POSITION INDEXING ON EACH TURRET WITH BASE MOUNT TOOLING SYSTEM Y-AXIS ON BOTH TURRETS (2) INTEGRAL SPINDLES FULL CONTOURING C-AXES ON BOTH SPINDLE MILL/DRILL ON UPPER AND LOWER TURRETS PARTS CATCHER LEFT AND RIGHT PROGRAMMABLE PARTS UNLOADER PARTS CONVEYOR BAR FEED INTERFACE 8" 3-JAW KITAGAWA CHUCK FOR LEFT AND RIGHT SPINDLES (COLLET SYSTEMS IN ON MACHINE NOT INCLUDED IN SALE) (2) X-AXIS LIVE HOLDERS (2) Z-AXIS LIVE HOLDERS STANDARD FACTORY STATIC TOOLING DOOSAN TOOL LOAD MONITORING SYSTEM AIR BLAST SYSTEM FOR CHUCK CLEANING 2 machines available

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m Iaodpfx Abjvzln Ronjp The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available

Condition: good (used), Year of construction: 2011, 320mm max cutting diameter, 510mm swing, 305mm max turned length, Iodpfsyvhv Ejx Abnjap 51mm bar capacity, 11kW motor, Fanuc Oi-Series Control, 3 Jaw Chuck, Tool setter, Parts Catcher, 12 Station turret, spindle speed 5000rpm, swarf conveyor, multifeed barfeed.

Year of construction: 2014, condition: ready for operation (used), General Data Machine weight 15500 kg Main Drive Number of axis 7 Spindle Speed 4000 RPM Iodpfx Aex D E Rasbnoap Spindle motor power 22 kW Control Unit Brand FANUC Model Series 31i-MODEL B5 Movement X-Axis Movement 630 mm Z-Axis Movement 1585 mm Y-Axis Movement 115 mm This 7-axis DOOSAN Puma MX2600ST was manufactured in 2014, featuring a robust horizontal turning machine design. It includes a B-axis of +/-120 degrees, extensive X, Y, Z travels, and a bar capacity of 76mm. The machine is equipped with a FANUC 31i-Model B5 control, a 40 station tool changer, and a 22kW spindle motor. If you are looking to get high-quality turning capabilities consider the DOOSAN Puma MX2600ST machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2014, operating hours: 28,446 h, Control Unit Brand FANUC Movement X-Axis Movement 762 mm Y-Axis Movement 516 mm Z-Axis Movement 570 mm Iedpfjx D Dz Dsx Abnoap This 3-axis DOOSAN VC 510 was manufactured in 2014. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining center. Contact us for further details regarding this machine. Application Types Milling

Condition: good (used), power: 141 kW (191.71 HP), fuel type: diesel, color: orange, Year of construction: 2016, operating hours: 8,625 h, Equipment: air conditioning, Technical information Track width: 60 cm AdBlue system: Yes Make of engine: DL06P Empty weight: 25.100 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: DHKCEBBWTG0001283 Iaodpfx Abeyua E Uensp Other information Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 9,6x3x3,6 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: used, color: orange, lifting height: 3,410 mm, Year of construction: 2019, operating hours: 3,110 h, Year of manufacture: 2019 Field of application: Construction Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Digging depth: 4.88 m Iajdpfx Aboxqfb Esnjp

Condition: good (used), power: 213 kW (289.60 HP), fuel type: diesel, color: orange, Year of construction: 2018, operating hours: 6,500 h, Equipment: air conditioning, Technical information Track width: 80 cm AdBlue system: Yes Make of engine: DL08P Empty weight: 36.200 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: DWGCECEBEH1020055 Other information Emission level: Stage IV / Tier IV final Delivery terms: EXW Iaodpoyt A Uiefx Abnop Transport dimensions (LxWxH): 11,3x3,5x3,4 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, turning length: 300 mm, turning diameter: 300 mm, spindle bore: 52 mm, spindle speed (max.): 4,500 rpm, controller model: FANUC CNC, TECHNICAL DETAILS Max. turning diameter: 300 mm Max. turning length: 300 mm Spindle bore: 52 mm Main spindle speed: 4,500 rpm Tool turret: 12 stations MACHINE DETAILS Machine weight: 2,200 kg EQUIPMENT Horizontal CNC lathe High-performance main spindle Robust machine construction for high dimensional accuracy Tool turret with fast indexing Compact design with a small footprint Iasdpeyvfvuefx Abnep User-friendly CNC control High reliability and low maintenance Control: FANUC CNC

Condition: new, power: 257 kW (349.42 HP), fuel type: diesel, color: orange, Year of construction: 2023, operating hours: 8 h, Equipment: air conditioning, Technical information Track width: 60 cm Empty weight: 50.800 kg Make of engine: DC13 076A Functional Iaodpfx Abeytm Hvsnop Bucket capacity: 2,72 m³ Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Emission level: Stage IIIA / Tier III Delivery terms: EXW Transport dimensions (LxWxH): 12,2x3,35x3,8 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information CE marked - No CE Certificate available

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Integrated turning center with infinitely variable swiveling milling head and Y-axis, motorized lower turret and counter spindle. Condition: Very well preserved, machine comes from a company liquidation. Time recording: Control unit on: 13127 hours Runtime: 3833 hours Processing time: 2835 hours The upper head is fed by a tool magazine and can turn or mill at various angles. Even highly complex components can be completely machined without further repositioning. Fanuc 31i-B CNC control Swing diameter over bed: 1000 mm Maximum turning diameter: 760 mm Maximum turning length: 1540 mm Maximum bar diameter (manual/continuous): 76/76 mm Y-axis travel: 230 mm (±115 mm) Clamp (counter spindle) ASA interface: A2-8 Spindle speed: 4000 rpm kW/ AC motor power (cont./30 min.) 22/26 Turning/milling head B-axis rotation / indexing 240° (±120°) Tool holder Capto C6 Speed ??in revolutions per minute 12000 rpm AC motor power kW/30 min. 15/18.5 Number of tools 40 (Opz. 80) Tool turret Number of driven tools 12 (12) Number of driven tools 7.8 kW/30 min. total power requirement 94,42 kW Iasdpfx Abjyua T Ssnjp weight of the machine ca. 15,5 t

Condition: used, fuel type: electric, lifting height: 4,800 mm, Year of construction: 2014, operating hours: 6,300 h, Year of manufacture: 2014 Iodpfxsx Hgrao Abnsap Empty weight: 23.500 kg Carrying capacity: 1.800 kg GVW: 25.300 kg Dimensions (LxBxH): 898 x 299 x 308 cm Track width: 60 cm Digging depth: 10.795 m

Condition: used, fuel type: diesel, color: orange, lifting height: 4,050 mm, Year of construction: 2015, operating hours: 6,800 h, Year of manufacture: 2015 Field of application: Construction Iedpfx Aex Hgn Uebnoap Empty weight: 6.000 kg Dimensions (LxBxH): 567 x 198 x 255 cm Engine type: Yanmar Yanmar 4TNV94L

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 800 kg, number of slots in tool magazine: 30, controller manufacturer: Fanuc, total height: 2,700 mm, total length: 4,080 mm, total width: 2,400 mm, overall weight: 7,000 kg, table length: 1,200 mm, table width: 510 mm, controller model: Oi-MC, coolant supply: 15 bar, spindle motor power: 15,000 W, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, spindle nose: BT40, spindle speed (max.): 12,000 rpm, table load: 800 kg, Equipment: chip conveyor, rotational speed infinitely variable, Doosan NM510 Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Fanuc Series Oi-MC Condition: Very Good Iaedpev Iq Ezjfx Abnep Includes Swarf Conveyor Chiller MCF20 Coolant Filter Autolube 6 x Tool Holders Notes Vice and clamping block in photos not included Technical Specifications Table Size: 1200 x 510mm Table Load: 800kg Travel (X-Axis): 1020mm Travel (Y-Axis): 510mm Travel (Z-Axis): 510mm Max Spindle Speed: 12,000rpm Spindle Power: 18.5/15/11kW Spindle Taper: BT 40 Rapid Traverse (X/Y/Z): 36/36/30m/min Tool Storage Capacity: 30 tools Tool Change Time (T-T/C-C): 1.7/3.5sec Machine Dimensions: 4080 x 2400 x 2700mm Machine Weight: 7,000kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 6,280 h, load capacity: 3,500 kg, lifting height: 5,205 mm, free lift: 1,700 mm, fuel type: gas, mast type: triplex, construction height: 2,515 mm, fork length: 1,500 mm, empty load weight: 5,500 kg, total length: 3,200 mm, drive type: Treibgas, construction width: 1,800 mm, LPG forklift Load centre: 500 Mast type: Triplex Technical condition: normal Iaodpfeytkkfex Abnop Front tyre type: Superelastic Front tyre condition: 80 - 100% Rear tyre type: Superelastic Rear tyre condition: 80 - 100% Sideshift, fork positioner, 3rd valve, 4th valve, rear working light, front working light, roof cover, windscreen, full free lift,

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 22,000 W, total height: 2,163 mm, total width: 2,005 mm, overall weight: 7,500 kg, product length (max.): 4,438 mm, number of axes: 4, This 4-axis DOOSAN Puma 2600 LYB II was manufactured in 2021. It features a maximum turning diameter of 376 mm and a turning length of 1,350 mm. The machine includes a 12-station turret, a live tailstock, and a steady rest with a diameter range from 40 mm to 200 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2600 LYB II horizontal turning machine we have for sale. Contact us for further details. • Capacity • Swing over bed: 780 mm • Swing over carriage: 630 mm • Recommended turning diameter: 315 mm • Max turning diameter: 376 mm • Max turning length: 1,350 mm • Bar capacity: 102–103 mm • Main spindle • Nose: ASA A2-11 • Bearing diameter: 160 mm • Through-spindle bore: 115 mm • C-axis indexing accuracy: 0.001° • Sub-spindle (if equipped) • Speed: 4,500 rpm • Nose: ASA A2-5 • Bore: 62 mm • Turret • Stations: 24 (option installed; standard 12) • Tool size: 25 mm • Boring bar capacity: 50 mm Ijdsytt A Rspfx Abneap • Indexing time: 0.15 s • Live tool speed: 5,000 rpm • Axes • C rotation: 360° • Rapid traverse • X: 30 m/min • Z: 30 m/min • C: 10 m/min • Tailstock • Type: Live tailstock • Quill diameter: 100 mm • Taper: MT5 • Quill stroke: 100 mm • Motor / Power • Live tool motor: 7.5 / 1.5 kW • Feed motor: 3.0 / 4.0 / 3.0 kW • Coolant pump motor: 0.4 kW • Electrical capacity: 46.40 kVA Additional equipment • 315 mm chuck • MORARI steady rest, 40–200 mm diameter range • Three motorized radial Eppinger live toolholders/spindles • Tool presetting system (tool presetter) Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2011, In good technical condition and fully functional. Year of manufacture: 06/2011. Fanuc control system. Axis travel – X-axis 2400 mm, Y-axis 960 mm, and Z-axis 800 mm. Isdpfjyu Nb Sjx Abneap

Condition: good (used), Year of construction: 2022, functionality: fully functional, Fanuc control, two turrets, Ijdpfx Abjyt R Udjneap Y-axis, sub spindle, 65 mm spindle bore, short loader, tool holder, AGW,

Condition: used, Year of construction: 2016, Technical details: travel: 1300 mm length: 670 mm width: 625 mm control: Heidenhain TNC 620 spindle turning speed range: 12000 1/min table load: 1300 kg tool change unit: 40 Pos. spindle taper ISO: SK 40 spindle: 17 / 10 kW dimensions of the machine ca.: 3,35 x 2,60 x 3,10 m weight: 8,5 t : 40 kVA rapid traverse: 36 / 36 / 30 m/min vertical machining center, touch probe RENISHAW OMP 40-2, coolant tank 325 l / incl. 20 bar high pressure pump (internal coolant supply) air through spindle, el. handwheel, oil-mist suction, chipconveyor, flush gun, approx. 13.000h "machine on", approx. 3.000h "spindle on" Iajdpfx Absytrw Hsnjp inspection under power in factory is still possible *

Condition: used, Year of construction: 2018, operating hours: 5,156 h, 2018 | Doosan DX235LCR-5 | Used Tracked Excavator | 5156 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 115500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 64 inspection points 58 approved ✅ 3 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Crawler excavator Doosan DX235LCR-5 from 2018. short tail version. the boom measures 5.80m (basic boom 3.10m, adjustable part 2.90m) and the stick 2.40m. floor plate width 600mm. the condition of the machine corresponds to the value of the operating hours. the machine shows wear on pins and bushings corresponding to the age and mileage as well as the purpose of use, as well as signs of use (dents, abrasions, etc.). at the time of the inspection, the machine ran/functioned without any abnormalities. maintained machine. the sprocket/turas should be replaced. the customer has decided to keep the backhoe bucket after the inspection. the illustrated backhoe bucket is therefore NOT included in the sale! 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33296 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed Iaodpfx Ajyfxv Tobnop ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2012, Doosan DNM 400 CNC machining center Year 2011/12 Heidenhain TNC 530 control X-762 mm Y-435 mm Z-510 mm Table 920x435 mm Spindle max. 12,000 rpm Through-spindle coolant (IKZ) Tool magazine for 30 tools Spindle taper SK40 BLUM workpiece probe Includes toolholders with the machine Iasdsyvizpopfx Abnsp LNS chip conveyor Machine documentation

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 53 mm, travel distance Z-axis: 830 mm, spindle motor power: 33,000 W, controller manufacturer: SIEMENS, controller model: 828D, number of axes: 3, This 3-axis DOOSAN Puma 2600 SY II was manufactured in 2018, designed for precision in horizontal turning. Ideal for complex machining tasks, this machine ensures robust performance and durability. If you are looking to get high quality turning capabilities consider the DOOSAN Puma 2600 SY II machine we have for sale. Contact us for more information. Additional equipment • Mekiload Gantry Loader • Renishaw Equator • Renishaw Equator • Machine includes a rotary indexing magazine • Machine includes a gantry robot Machine Benefits Qualitative Machine Benefits • Tool change time: 1. 0 second • Max speed (station): 5000 rpm • Holder for turning tools: 25 x 25 mm • Holder for boring bar: Ø50 mm • Coolant pump capacity: 1. 5 kw Technical Machine Benefits • Max. Turning diameter over bed: 780 mm • Max. Turning diameter over slide: 630 mm • Max. Turning length: 760 mm • Main spindle torque: 719 nm • Spindle mount (main): a2 #8 • Sub spindle speed: 6000 rpm • Sub spindle power (30 min): 18. 2 kw • Sub spindle torque: 220 nm • Spindle mount (sub): a2 #5 • Number of stations: 24 (12 driven) Iaedpfsyr R A Eex Abnep Extra Information Machine still under power

Year of construction: 2015, operating hours: 7,200 h, condition: ready for operation (used), Control Unit Brand FANUC Main Drive Spindle speed range 2000 Number of axis 2 Movement X-Axis Movement 352 mm Z-Axis Movement 1105 mm Iodpex D Dtajfx Abnoap This DOOSAN PUMA 4100B was manufactured in 2015. A robust horizontal turning machine featuring a Fanuc 32i CNC system, it offers a maximum turning diameter of 550 mm and a length of 1,042 mm. Equipped with a 10-station turret and a chip conveyor, it's ideal for efficient machining with 7,200 hours of operation. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 4100B machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2012, Ref. -No.: 10637 Manufacturer: DOOSAN PUMA Type: 480XLM Year of construction: 2012 Type of control: CNC Control: FANUC 32iA Storage location: Halberstadt Country of origin: Korea Bar passage: 165 mm Turning Length: 992 mm Spindle Bore: 181 mm Max. Turning diameter: 900 mm Max. machining diameter: 650 mm Spindle motor drive: 45 kW Turret places: 10 Pcs Machine length: 7000 mm Machine width: 2310 mm Machine Height: 2440 mm Weight Of The Machine Ca.: 12800 t Swivel range: 900 mm spindle: 1500 RPM Iedpfxsyr H I Re Abnjap Turning Speeds: 1500 RPM Further information: - 3-jaw power chuck - Programmable tailstock - Chip conveyor - Cooling - SMW SLU5 hydraulic steady rest The machine can be viewed under power by arrangement.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 15,000 h, Main Drive Spindle speed range 12000 Tool taper Capto C6 Number of axis 5 Movement Y-Axis Movement 230 mm A-Axis Movement 1550 mm Ijdjx E Eamopfx Abneap Workpiece Workpiece drm over bed 1000 mm This 5-axis DOOSAN Puma MX2600ST turn-mill centre was manufactured in 2013. It features a maximum turning diameter of Ø 760 mm, part length up to 1540 mm, and bar capacity of Ø 76 mm. Equipped with a Fanuc 31i-A control, dual spindles with speeds up to 4000 rpm, and a milling spindle at 12,000 rpm. Includes a tool magazine with 80 positions and a swarf conveyor. Consider the opportunity to buy this DOOSAN Puma MX2600ST turn-mill centre. Contact us for more information. Application Types Turning