Used Doosan Dl400 for sale (280)

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available Fedpfx Aevzln Rsdljgc

Condition: good (used), Year of construction: 2006, 510mm swing, 320mm max. machining diameter, 525mm max turned length, 4000rpm spindle, Fedpfxezcwz Ne Adlogc 65mm bar capacity, 12 station turret, 15W spindle motor, FANUC Oi control, collet chuck, Tool setter Tailstock, Parts Catcher, Swarf Conveyor, Coolant

Condition: excellent (used), Year of construction: 2020, Table size 1630 x 760 mm, Fgsdpfjzbkm Nsx Adlec table load 1500 kgs, Traverses XYZ 1525 x 762 x 625 mm, rapid feedrates 30m/min, Spindle power 24Kw, spindle speed 12,000rpm, 30 station ATC, spindle taper BT40, through spindle coolant, swarf conveyor, spindle probe , heidenhain tnc 640control.

Condition: excellent (used), Year of construction: 2018, Traverses X Y Z 800 x 450 x 510mm, table size 1000 x 450 mm, table load 600KGS, spindle taper BT40, spindle speed 12,000rpm, 30 station ATC, spindle power 18.5/11Kw, Through spindle coolant, Siemens 828D control Fodozbhv Ispfx Adlegc

Condition: good (used), Year of construction: 2008, Brand : DOOSAN Model : MYNX 750 Type : VERTICAL Cnc: FANUC 21 iMB Hours : 7.300 h Table size : 1600 x 750 mm X Travel : 1500 mm Fsdpfx Aet H Nbujdlegc Y Travel : 760 mm Z Travel : 650 mm Spindle speed: 12.000 rpm Taper type: BT 40 Number of tools: 30 Equipped with chip conveyor

Condition: good (used), Year of construction: 2009, Traverses XYZ 850 x 700 x 750 mm, Pallet size 500 x 500mm, pallet load 500 kgs, 60 ATC, BT40 spindle taper, Fanuc 31i- control. Spindle power 22Kw, B axis 0.001 Degrees, 14000 rpm spindle, swarf conveyor, Through Spindle Coolant. Fgedpewq Iwxofx Adlsc

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 6,280 h, load capacity: 3,500 kg, lifting height: 5,205 mm, free lift: 1,700 mm, fuel type: gas, mast type: triplex, construction height: 2,515 mm, fork length: 1,500 mm, empty load weight: 5,500 kg, total length: 3,200 mm, drive type: Treibgas, construction width: 1,800 mm, LPG forklift Load centre: 500 Mast type: Triplex Technical condition: normal Front tyre type: Superelastic Front tyre condition: 80 - 100% Rear tyre type: Superelastic Rear tyre condition: 80 - 100% Sideshift, fork positioner, 3rd valve, 4th valve, rear working light, front working light, roof cover, windscreen, full free lift, Fedpfx Aeytkkfodlsgc

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 22,000 W, total height: 2,163 mm, total width: 2,005 mm, overall weight: 7,500 kg, product length (max.): 4,438 mm, number of axes: 4, This 4-axis DOOSAN Puma 2600 LYB II was manufactured in 2021. It features a maximum turning diameter of 376 mm and a turning length of 1,350 mm. The machine includes a 12-station turret, a live tailstock, and a steady rest with a diameter range from 40 mm to 200 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2600 LYB II horizontal turning machine we have for sale. Contact us for further details. • Capacity • Swing over bed: 780 mm • Swing over carriage: 630 mm • Recommended turning diameter: 315 mm • Max turning diameter: 376 mm • Max turning length: 1,350 mm • Bar capacity: 102–103 mm • Main spindle • Nose: ASA A2-11 • Bearing diameter: 160 mm • Through-spindle bore: 115 mm • C-axis indexing accuracy: 0.001° • Turret • Stations: 24 (option installed; standard 12) • Tool size: 25 mm • Boring bar capacity: 50 mm • Indexing time: 0.15 s • Live tool speed: 5,000 rpm • Axes • C rotation: 360° • Rapid traverse • X: 30 m/min • Z: 30 m/min • C: 10 m/min • Tailstock Fsdpfoytt A Rox Adlogc • Type: Live tailstock • Quill diameter: 100 mm • Taper: MT5 • Quill stroke: 100 mm • Motor / Power • Live tool motor: 7.5 / 1.5 kW • Feed motor: 3.0 / 4.0 / 3.0 kW • Coolant pump motor: 0.4 kW • Electrical capacity: 46.40 kVA Additional equipment • 315 mm chuck • MORARI steady rest, 40–200 mm diameter range • Three motorized radial Eppinger live toolholders/spindles • Tool presetting system (tool presetter) Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2011, operating hours: 11,230 h, Location: Lleida (Lleida) The used Doosan DL300 wheel loader is engineered for operators to work efficiently for hours under excellent conditions. Offers more space, improved visibility, air conditioning, a very comfortable seat, ample storage, and additional features. Bucket capacity: 3 m3 (3,000 l). Second-hand wheel loader for sale, equipped with a front bucket, ideal for building construction, mining, roadworks, highways, tunnels, or hydraulic dam projects. Fgsdpjzb Nd Hsfx Adloc Used Doosan DL300 brand loader. This Doosan DL300 loader outperforms the competition, featuring technologies that lower fuel consumption and set new standards in cab comfort. CE

Condition: used, color: orange, Year of construction: 2021, operating hours: 4,240 h, Equipment: air conditioning, Empty weight: 36.000 kg Dimensions (LxBxH): 1141 x 300 x 364 cm Track width: 60 cm Digging depth: 6.94 m Fgodozb Ndtspfx Adlsc = Additional options and accessories = - Central lubrication

Condition: used, Year of construction: 2011, operating hours: 10,700 h, Empty weight: 18.890 kg Fjdpfozb Ndmjx Adlogc Dimensions (LxBxH): 810 x 292 x 347 cm Digging depth: 7.533 m

Condition: used, fuel type: electric, lifting height: 4,800 mm, Year of construction: 2014, operating hours: 6,320 h, Empty weight: 23.500 kg Carrying capacity: 1.800 kg Fedpjzb Nc Nefx Adlogc GVW: 25.300 kg Dimensions (LxBxH): 898 x 299 x 308 cm Track width: 60 cm Digging depth: 10.795 m = Additional options and accessories = - Central lubrication

Condition: used, Year of construction: 2017, operating hours: 7,970 h, Location: Cabanillas del Campo (Guadalajara) The used Doosan DL300-5 wheel loader is designed to allow the operator to work for hours under excellent conditions. More space, better visibility, air conditioning, a very comfortable seat, sufficient storage space, and more features. Load capacity: 3 m3 (3,000 liters). Fjdozb Nahjpfx Adlogc Used wheel loader for sale, equipped with a bucket at the front, ideal for building construction, mining, roads, highways, tunnels, or hydroelectric dams. This wheel loader model outperforms the competition with technologies that reduce fuel consumption and set new standards for comfort in the cab. CE certified.

Condition: used, power: 127 kW (172.67 HP), lifting height: 2,750 mm, Year of construction: 2015, operating hours: 6,780 h, Empty weight: 14.400 kg Dimensions (LxBxH): 772 x 264 x 328 cm Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3 Fgedpfozb I U Dex Adlsc

Condition: used, Year of construction: 2017, operating hours: 6,680 h, Year of manufacture: 2017 Empty weight: 23.500 kg Dimensions (LxBxH): 898 x 299 x 308 cm Track width: 60 cm Digging depth: 10.795 m Fsdpoy Nwudsfx Adlsgc = Additional options and accessories = - Central lubrication

Condition: ready for operation (used), Year of construction: 2018, operating hours: 4,493 h, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 350 mm, spindle motor power: 13,000 W, spindle speed (max.): 12,000 rpm, total height: 2,507 mm, total width: 1,620 mm, overall weight: 5,200 kg, controller manufacturer: FANUC, controller model: i Series, product length (max.): 3,230 mm, table load: 200 kg, tool weight: 2,800 g, number of axes: 3, This 3-axis DOOSAN T 3600 D was manufactured in 2018. It features an X-axis travel of 520 mm, Y-axis travel of 360 mm, and Z-axis travel of 350 mm. The machine includes a table size of 2x 650 x 375 mm with a loading capacity of 2x 200 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN T 3600 D machine we have for sale. Contact us for further details. - Controlled Axes: 3 (X, Y, Z)- Distance from Spindle Nose to Table Top: 150-500 mm- Table Size: 2x 650 x 375 mm (Pallet changer system)- Table Loading Capacity: 2x 200 kg- Table Surface Type: T-Slot- Spindle Taper: ISO #30 (BT30)- Spindle Power: 13 kW (15 min) / 3.7 kW (Continuous)- Max. Spindle Torque: 82.7 N-m- Rapid Traverse Rate (X / Y / Z): 48 / 48 / 56 m/min- Tool Storage Capacity: 21 stations (Upgraded from standard 14)- Max. Tool Diameter (With / Without Adjacent Tools): 80 mm / 150 mm- Max. Tool Length: 200 mm- Tool Change Time (Tool-to-Tool / Chip-to-Chip): 1.45 sec / 2.22 sec- Main Power Supply: AC 380V, 3-Phase, 50/60Hz- Rated Power Capacity: 19.01 kVA- Full Load Current: 32.05 A- Compressed Air Supply: 0.54 MPa- Coolant Tank Capacity: 200 L (Base) / 270 L- Control System Power-On Time: 15,979 Hours- Machine Operating Time: 14,317 Hours- Actual Machining Time: 4,493 Hours- Total Completed Workpieces: 2,460,030 ea- Internal High-Pressure Cooling: 20 bar- Coolant Pump Delivery Pressure: 4.5 bar (1.1 kW, 30 l/min KSS Pump)- Additional Equipment: Enclosed top machine cover (Top-cover), Oil skimmer, Pneumatic clamping preparation (1 pair per pallet), Automatic workspace door with safety edge, 3-color status signal tower, Workspace lighting, Rigid tapping function, Workpiece coordinate system addition (G54.1 P1-48) Technical Specification Fjdpozb Ii Uofx Adlsgc Driven Tools No

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 205 mm, travel distance Z-axis: 580 mm, number of axes: 2, Horizontal turning machine manufactured in 2006. This DOOSAN Puma 240 MB features driven tools and is equipped with a Fanuc 0iTC control unit. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 240 MB machine we have for sale. Contact us for further details. - Manufacturer: Doosan- Model: Puma 240 MB with driven tools- Year of Manufacture: 2006- Condition: Very good / Fully functional- Control Unit: Fanuc 0iTC Technical Specification Fedpfx Adezb Etwelegc Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 205 mm, travel distance Z-axis: 550 mm, number of axes: 4, This 4-axis DOOSAN Lynx 220 LMS was manufactured in 2013. It features a Fanuc 31 i control unit and comes equipped with a short bar loader/bar feeder. If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 220 LMS machine we have for sale. Contact us for further details. - Manufacturer: Doosan- Model: Lyax 220 LMS- Year of Construction: 2013- Condition: Very good / Fully functional- Control Unit: Fanuc 31 i- Included Equipment: Short bar loader / Bar feeder (visible connected to the left of the lathe) Technical Specification Counter Spindle Yes Fodpfxezb Ergs Adlegc Driven Tools Yes

Condition: used, lifting height: 4,650 mm, Year of construction: 2017, operating hours: 6,920 h, Year of manufacture: 2017 Fgsdpexqfhljfx Adljc Empty weight: 8.500 kg Digging depth: 4.175 m = Additional options and accessories = - Rubber tracks

Condition: ready for operation (used), Year of construction: 2016, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 26,000 W, total height: 2,198 mm, total width: 2,030 mm, overall weight: 7,050 kg, controller manufacturer: FANUC, product length (max.): 4,855 mm, number of axes: 3, This 3-axis DOOSAN PUMA GT3100LM was manufactured in 2016. It features a maximum turning diameter of 376 mm and a turning length of 1,245 mm. The machine is equipped with a 12-station turret and live tooling capability, providing versatility for various applications. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA GT3100LM horizontal turning machine we have for sale. Contact us for further details. • Electrical: Nominal capacity 33.91 kVA; AC 400 V; 3Ø, PE, 50/60 Hz; Full load current 48.95 A; Interrupt power 5 kA; Short circuit withstand 10 kA; Electrical diagram edition GT3100H31UA00 • Chuck: Samchully MH-212, 3-jaw hydraulic; Chuck size 305 mm Fgsdpfx Adozbilqjlsc • Turning capacity: Max swing over bed 720 mm; Max turning diameter 376 mm; Max turning length 1,245 mm; Max bar capacity 102 mm • Spindle: Nose A2-11; Bore diameter 115 mm; Motor power 26/22 kW (30 min/continuous); Max torque 1,123 Nm; C-axis indexing increment 0.001° • Turret: BMT65P, 12 stations; Live tool max speed 5,000 rpm; Live tool motor power 7.5 kW; 12-station turret with live tooling capability • Axes: Rapids X 24 m/min, Z 30 m/min; Guideways: Solid box guideways on all axes • Tailstock: Programmable movable/digital tailstock with live center; Quill taper MT5 • Counters: Power-on 13,813 h 38 min; Operating 8,538 h 37 min; Cutting 5,547 h 03 min Additional equipment • External Eppinger Preci-Flex live tool holders and static blocks • Tool-setting probe arm • Original technical documentation Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2021, Twin-spindle version With milling head with C-axis with Y-axis with driven tools FANUC Series 31i Model 5 control Turning diameter - 540 mm Turning length - 1040 mm Y-axis travel 170 mm (+/- 85) Spindle taper ASA A2-6 Fsdpfx Adszbr Aljljgc Spindle speeds 5,000 rpm each C-axis indexing 0.001° Milling head B-axis 240° Indexing 0.001° Spindle speed 12,000 rpm Turret with 12 driven positions Tool magazine with 80 positions Part pick-up device Tool measuring system LNS Sprint 565 S2 bar feeder Misc. accessories MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: FANUC, controller model: 31i CNC, total height: 3,760 mm, total width: 4,325 mm, overall weight: 26,000 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 35,000 W, number of slots in tool magazine: 60, tool weight: 30,000 g, product length (max.): 8,150 mm, number of axes: 4, This 4-axis DOOSAN HM 8000 horizontal machining center was manufactured in 2014. Equipped with Fanuc 31i CNC control, it features a maximum workpiece diameter of 1450 mm and weight capacity of 2000 Kg. It includes a high-pressure through-spindle coolant system, chip conveyor, and both workpiece and tool probes. If you are looking to get high-quality milling capabilities consider the DOOSAN HM 8000 machine we have for sale. Contact us for more information about this machine. • Max. workpiece diameter: 1450 mm • Max. workpiece weight: 2000 kg • Travel (X/Y/Z): 1400 x 1050 x 1200 mm • Pallet size: 800 x 800 mm • Spindle motor power: 22/35 kW • Max. torque: 1732 N·m • B-axis: indexable by degree • Max. tool diameter: 130/320 mm • Max. tool length: 630 mm Additional equipment • Belt-type oil skimmer • Triple light tower • Pallet centering device • Shower coolant • Through-spindle coolant 70 bar, 7.5 kW, with cyclone filtration • Automatic shutdown • Tool load monitoring • Chip conveyor • Workpiece probe OMP60 Fgodpfx Ajzar Aijdljc • Tool probe TS27R Dimensions Machine Depth 8150 mm Technical Specification Taper Size BT 50

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: 828D, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DOOSAN DNM 5700 was manufactured in 2018. It features an X-axis travel of 1050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine is equipped with a powerful 18.5 kW spindle, a table size of 1300 × 570 mm, and a tool changer with 30 positions. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details. • Table size: 1300 × 570 mm • Tool changer: 30 positions • Condition: Very good • Maintenance: Regularly maintained Additional equipment Fjdpfxjzarpce Adljgc • High-pressure coolant • Renishaw probing system • Chip conveyor • Extraction unit Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2011, number of axes: 2, This DOOSAN PUMA 2100MS was manufactured in 2011. It features a 65 mm motorized bar passage and a counter-spindle, complete with accessories and an LNS bar loader. Ideal for precision horizontal turning operations. Contact us for more information about this machine. Fsdpjzaripefx Adlsgc Additional equipment • Motorized bar passage with counter-spindle • Complete with accessories and LNS bar loader Extra Information Machine still under power

Condition: good (used), functionality: fully functional, Year of construction: 2019, load capacity: 2,000 kg, lifting height: 4,750 mm, fork length: 1,200 mm, overall weight: 4,000 kg, total height: 2,100 mm, total length: 4,000 mm, total width: 1,200 mm, Equipment: fork extension, DOOSAN G 20 SC-5 LPG Forklift - incl. fork extensions: 2000 mm Fsdpfxoy Dcwme Adlegc Note: The item must be collected between 07 and 09 July 2026, on a date to be agreed. FCA D-71263 Weil der Stadt – loaded onto truck