Used Doosan Dx225Lc for sale (297)

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, turning length: 300 mm, turning diameter: 300 mm, spindle bore: 52 mm, spindle speed (max.): 4,500 rpm, controller model: FANUC CNC, TECHNICAL DETAILS Max. turning diameter: 300 mm Max. turning length: 300 mm Spindle bore: 52 mm Main spindle speed: 4,500 rpm Tool turret: 12 stations Rodpfx Asyvfvusbwsr MACHINE DETAILS Machine weight: 2,200 kg EQUIPMENT Horizontal CNC lathe High-performance main spindle Robust machine construction for high dimensional accuracy Tool turret with fast indexing Compact design with a small footprint User-friendly CNC control High reliability and low maintenance Control: FANUC CNC

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm Rjdpfx Abevzln Rewor z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available

Condition: excellent (used), Year of construction: 2002, operating hours: 4,844 h, functionality: fully functional, turning diameter over cross slide: 449 mm, turning length: 1,330 mm, turning diameter: 393 mm, spindle bore: 90 mm, spindle speed (max.): 3,500 rpm, Daewoo Puma 300LB CNC Lathe Model: Puma 300 LB Year: 2002 Control: FANUC 18i-T Swing over Bed: 580mm Swing over Carriage: 449mm Max. Turning Dia.: 393mm Tuning Length: 1330mm Spindle Bore: 90mm dia. Spindle Speeds: 3500 RPM Rodpeyxq A Tofx Abwsr Machine With: 300mm Power Chuck Manual Fixed Steady Tool Holders Manuals

Condition: excellent (used), Year of construction: 2016, Traverses XYZ: 1020 x 540 x 510mm, table size 1200 x 540mm, ISO40 spindle taper, spindle speed 12000 rpm, Heidenhain Control, spindle motor power 15kW, Rjdpoyylzasfx Abwer 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor

Condition: excellent (used), Year of construction: 2017, Traverses X Y Z; 1300 x 670 x 625mm, Table size 1500 x 670mm, Redpfx Ajyyldhsbwor maximum table load 1300 kgs. min-max height spindle to table 150-775mm, spindle speed 12,000rpm, spindle taper BT40, 30 station ATC spindle power 18.5 Kw, Fanuc OI series control, spindle probe, Through spindle coolant

Condition: good (used), Year of construction: 2011, Turning diameter 376mm, Rjdpoyyakvefx Abwsr turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees, 12 station turret, 22KW Motor, Main spindle 4000rpm. milling -spindle 5000rpm, Fanuc I series, 3 jaw chucks, swarf conveyor, tool setter

Condition: used, Year of construction: 2014, operating hours: 5,079 h, lifting height: 4,320 mm, free lift: 1,480 mm, fuel type: gas, mast type: triplex, fork length: 1,190 mm, fork width: 1,080 mm, total height: 2,190 mm, total length: 2,810 mm, total width: 1,250 mm, color: other, Empty weight: 5.152 kg Lifting capacity: 3.500 kg - Year: 2014 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: FGA0E-1290-01085 - Operating hours: 5079 - Lifting capacity: 3500kg - Lifting height: 4320mm Redpfx Ajyx H Ryobwor - Overhead clearance: 2180mm - Free lift: 1480mm - Fork length: 1190mm - Maximum fork width: 1080mm - Minimum fork width: 260mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Work lights, Half cabin, Free-lift - Mast: Triplex - Drive: LPG - Motor brand: GM - Transport dimensions: 2810mm x 1255mm x 2190mm (l x w x h) - Transport weight [kg]: 5152kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, lifting height: 4,650 mm, Year of construction: 2017, operating hours: 6,890 h, Year of manufacture: 2017 Field of application: Construction Empty weight: 8.500 kg Digging depth: 4.175 m Rsdpfoxqfhljx Abwjr = Additional options and accessories = - Rubber tracks

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Technical details turning diameter 760 mm turning length 1540 mm control Fanuc 31i-B dimensions of machine 5500 x 2700 x 3110 mm chip conveyor 6900 x 2400 mm total power requirement 94,42 kW weight of the machine ca. 15,5 t Additional information Turning center with infinitely variable swiveling milling head and Y-axis, motorized lower turret and subspindle. Condition: Very well preserved, machine comes from a company liquidation. Time recording: Control unit on: 13127 hours Runtime: 3833 hours Processing time: 2835 hours The upper head is fed by a tool magazine and can turn or mill at various angles. Even highly complex components can be completely machined without further repositioning. Fanuc 31i-B CNC control Swing diameter over bed: 1000 mm Maximum turning diameter: 760 mm Maximum turning length: 1540 mm Maximum bar diameter (manual/continuous): 76/76 mm Y-axis travel: 230 mm (±115 mm) Clamp (counter spindle) Rsdpeyycd Eefx Abwsr ASA interface: A2-8 Spindle speed: 4000 rpm AC motor power (cont./30 min.) 22/26 kW Turning/milling head B-axis rotation / indexing 240 deg. (±120 deg.) Tool holder Capto C6 Speed in revolutions per minute 12000 rpm AC motor power 30 min. 15/18.5 kW Number of tools 40 (Opt. 80) Tool turret Number of driven tools 12 (12) Number of driven tools 7.8 kW/30 min.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 3 h, load capacity: 3,000 kg, lifting height: 4,730 mm, free lift: 1,400 mm, fuel type: gas, mast type: triplex, construction height: 2,165 mm, fork length: 1,200 mm, drive type: Treibgas, LPG forklift truck Mast type: Triplex Transmission: Automatic Technical condition: New Front tires type: Superelastic Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires condition: 80 - 100% Description: New machine including 12-month warranty or 1000 operating hours, new UVV inspection. We are happy to arrange affordable transport for you. Sideshift, Integrated sideshift Redpev Eff Rsfx Abwer 3rd valve, 4th valve, rear work lights, front work lights, roof cover, front windshield, full free lift, CE certificate.

Condition: good (used), Year of construction: 2011, 320mm max cutting diameter, 510mm swing, 305mm max turned length, Rodpfx Aoyvhv Eobwjr 51mm bar capacity, 11kW motor, Fanuc Oi-Series Control, 3 Jaw Chuck, Tool setter, Parts Catcher, 12 Station turret, spindle speed 5000rpm, swarf conveyor, multifeed barfeed.

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, controller manufacturer: FANUC, controller model: Series 21i-MB, spindle speed (max.): 8,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 60, number of axes: 4, This 4-axis DOOSAN ACE HC-500 was manufactured in 2005. It features an X-axis travel of 850 mm, Y-axis travel of 700 mm, and Z-axis travel of 750 mm. The machine includes a robust pallet size of 500 x 500 mm with a maximum pallet load of 500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN ACE HC-500 horizontal machining centre we have for sale. Contact us for further details. • Distance spindle face to pallet center: 150–900 mm Rjdpfoyxpplox Abwor • Distance spindle center to pallet surface: 50–750 mm • Pallet size: 500 x 500 mm • Max. pallet load: 500 kg • Spindle orientation built-in sensor • Through-spindle coolant: 70 kg/cm², max flow 20 L/min, pump power 3.7 kW • Spindle completely overhauled in 2023 • Z-axis ball screw replaced in 2020 Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2018, operating hours: 6,193 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 340 mm, spindle motor power: 15,000 W, controller manufacturer: FANUC, controller model: F0i, number of axes: 2, Horizontal turning machine manufactured in 2018. This DOOSAN Lynx 2100A features a maximum turning diameter of 350 mm and a turning length of 330 mm. It is equipped with a spindle speed of 5,000 rpm and a chuck size of 8” (210 mm). If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 2100A machine we have for sale. Contact us for further details regarding this machine. • Control: Fanuc F0i • Operating hours: 6,193 h • Spindle: 8" chuck (210 mm); bar capacity Ø52 mm • Capacity: Max turning diameter Ø350 mm; max turning length 330 mm • Axes: rapid traverse X/Z 30 m/min • Turret: 12 stations; tool change time 0.15 s; tool shank 25 x 25 mm; boring bar Ø32 mm • Tailstock: Programmable with rotating tip • Certification: CE Redpsyxhqzsfx Abwer • Software/monitoring: Doosan tool load monitoring system Additional equipment • Basic tool holder set • Oil mist extractor • Transformer • Bar feeder preparation • Workpiece catch with collection box • Automatic tool gauge • High-pressure cooling 7 bar (1.1 kW) • Oil separator • Chip collector • Electrical noise suppression Technical Specification Counter Spindle No Driven Tools No

Condition: good (used), Year of construction: 2001, In good technical condition and fully functional. Year of manufacture: 2001 Maximum turning diameter: 310 mm Maximum turning length: 750 mm Lathe with FEDEK feeder. Rodpfswxv Disx Abwjr Machine weight: approx. 4,800 kg. Dimensions: Length: 3400 mm, Width: 1800 mm, Height: 1900 mm

Condition: good (used), Year of construction: 2011, In good technical condition and fully functional. Year of manufacture: 06/2011. Fanuc control system. Axis travel – X-axis 2400 mm, Y-axis 960 mm, and Z-axis 800 mm. Rjdpoyu Nb Ssfx Abwor

Condition: excellent (used), power: 103 kW (140.04 HP), fuel type: diesel, color: orange, Year of construction: 2023, operating hours: 244 h, Equipment: air conditioning, Drivetrain AdBlue system: Yes Drive: Wheel Make of engine: DL06V Weights Empty weight: 18.500 kg Functional CE mark: yes Condition Technical condition: very good Visual appearance: very good Identification Serial number: DHKCEWCXCP5002429 Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Aeolus Emission level: Stage V / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 8,04x2,5x2,85 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information Rjdpjyibdxefx Abwor = Additional options and accessories = - 2-piece boom - Ad blue - Battery disconnector - Blade - Hammer/shear hydr. circuit - Safety line rupture valve - boom/hoist - Safety line rupture valve - dipper/stick - Slope/rotator hydr. circuit

Condition: used, Year of construction: 1996, functionality: fully functional, DOOSAN PUMA 15 L FANUC CONTROL 1.6 METRE TURNING LENGTH MAX TURNING DIA APPROX 660 MM SWING OPVER BED 800 MM SPINDLE BORE 115 MM 12 STATION TURRET CHUCK DIA 15'' - HYD 3 JAW TAILSTOCK SWARF CONVEYOR Redpeyw Nz Esfx Abwjr HYD STEADY NOT INCLUDED IN SALE - THE BASE PLATE WILL STAY WITH THE MACHINE . EVERYTHING WORKING WELL WEIGHT 14 TON

Condition: used, DAEWOO PUMA 300 LB (Doosan) 2-axis CNC lathe CNC Fanuc 18T Redpfoqfm A Aox Abwsr Hydraulic tailstock Condition: very good. This machine can be inspected in our warehouse, under power. Mimu machine tools Italy

Condition: used, Vertical machining center Daewoo (Doosan) ACE VC500 The machine can be seen working in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy Vertical machining center - 2-pallet Rodjtzgaqjpfx Abwer Daewoo ACE VC500 CNC Model Fanuc CNC version 18-M Spindle Taper toolholders iso 40 Power spindle 15 Kw RPM 10000 Number of tools 30 X-axis travel 760 mm Y-axis travel 510 mm Z-axis travel 570 mm Changer pallet yes Pallet dimensions 860x560 mm Maximum load allowed 300 Kg Swing type pallet yes High coolant pressure yes Cheap conveyor yes Brand Daewoo Model ACE VC500 Construction year 2000 DIMENSIONS AND WEIGHT Length 3600 mm Width 3700 mm Height 2935 mm Weight 9200 Kg The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with multiple axes of motion and a automatic tool exchange system and sometimes multiple pallets CNC type: FANUC 18-M Number of pallets: 2

Condition: used, Torni CNC Rodpfow Slx Usx Abwjr Doosan Puma TW2600 2016 (low hours) complete with robot it can be inspected in our warehouse in Gussago BS

Condition: excellent (used), Year of construction: 2020, operating hours: 3,833 h, functionality: fully functional, Turning center with infinitely variable swiveling milling head and Y-axis, motorized lower turret and sub-spindle. Manufacturer: Doosan Model: MX 2600 ST Year of manufacture: 2020 Condition: Very well maintained, machine comes from a site closure. Rsdpfx Aoywkw Ijbwor Operating times: Control on: 13,127 hours Run time: 3,833 hours Machining time: 2,835 hours The upper head is fed by a tool magazine and can be rotated or milled at various angles. Even highly complex components can be fully machined without additional repositioning. CNC Control: Fanuc 31i-B Swing diameter over bed: 1000 mm Maximum turning diameter: 760 mm Maximum turning length: 1540 mm Maximum bar diameter (manual/cont.): 76/76 mm Y-axis travel: 230 mm (±115 mm) Chuck (sub-spindle) ASA mount: A2-8 Spindle speed: 4,000 rpm AC motor power (cont./30min.): 22/26 kW Turning/Milling head B-axis rotation / indexing: 240° (±120°) Tool interface: Capto C6 Spindle speed: 12,000 rpm AC motor power (30min.): 15/18.5 kW Number of tools: 40 (Opt. 80) Turret Number of driven tools: 12 (12) Driven tool power: 7.8 kW/30min. Weight: 15.5 t.

Condition: used, Year of construction: 2011, turning diameter 250 mm turning length 510 mm control Fanuc i Series greates pass round over bed 510 mm swing diameter over slide rest 290 mm x-axis 175 mm z-axis 550 mm spindle tunring speed 6.000 U/min number of tool places 12 Pos. auto power on hours ca. 11.197 h spindle hours ca. 5.359 h Rodpfxoylcquj Abwjr In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Driven tools - Short bar feeder - Chip conveyor - Collets - 3-jaw chuck, hydraulic Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2006, turning diameter 320 mm turning length 322 mm control Fanuc D -iT greates pass round over bed 510 mm x-axis 175 mm z-axis 330 mm spindle tunring speed 6.000 U/min spindle drive 15 kW number of tool places 12 Pos. auto power on hours ca. 43.947 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor - Manual tailstock - Tool setter arm Rsdjya Ih Ijpfx Abwor - Parts catcher with collection box Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2011, turning diameter 250 mm turning length 510 mm control Fanuc i Series greates pass round over bed 510 mm swing diameter over slide rest 290 mm x-axis 175 mm z-axis 550 mm spindle tunring speed 6.000 U/min number of tool places 12 Pos. auto power on hours ca. 18.136 h spindle hours ca. 8.822 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Driven tools - Short bar feeder - Chip conveyor - Collets - 3-jaw chuck, hydraulic Redpfx Asylcqzsbwjr Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2015, turning diameter 210 mm turning length 1000 mm Redpfxoxq R Evs Abwsr control Fanuc 31i max. turning speeds 5.000 min/-1 drive capacity - main spindle 15 kW max. torque 476 Nm bar passage 65 mm x-axis 250 mm z-axis 1050 mm x2-axis 150 mm z2-axis 1030 mm spindle hours ca. 700 h accessories: Lünette, Späneförderer In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical details: - approx. 500 spindle hours Accessories: - Steady rest - Chip conveyor Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!