Used Gesan Dvs 180 for sale (6,376)

Condition: used, Year of construction: 2003, machine/vehicle number: 729.723.01, MACHINE DETAILS Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Rated operating current: 165 A Incoming feed line protection: 200 A Microcut Motor power: 90 kW Rated current: 158 A Gedpfx Age Ahgikjlekd Mixing screw Motor power: 2.2 kW Rated current: 5.20 A MC screw Motor power: 4.0 kW Rated current: 8.80 A Conveyor screw Motor power: 3.0 kW Rated current: 6.80 A Agitator, buffer tank Motor power: 1.5 kW Rated current: 3.60 A Note: Further technical data can be found in the attached document.

Condition: new, Year of construction: 2007, Storage location number: 100577028 Transport dimensions (L x W x H): 0 x 0 x 0 Gjdpfx Agszp T Taolokd ---- Location: Passau Dimensions: 3,750 x 1,450 x 2,180 mm (L x W x H) Weight: 3,644 kg Engine: Volvo TAD740GE Fuel: Diesel Power output: 250 kVA

Year of construction: 2006, condition: used, functionality: fully functional, Pinacho Smart 180 lathe in excellent working condition Gkjdeygq R Sjpfx Agljd

Year of construction: 2021, condition: good (used), 1 complete granulation line, cutting/compacting/extruder combination, tangential, since 2021 only operated in a single shift using production waste, including DPE ground material/aluminum (pipe material). System consisting of: Hydraulic roller cutter, 140 cm width, for roller diameters up to 60 cm, 18.5 kW drive. Erema conveyor belt with metal detection bridge, 900 cm x 110 cm, with timer. Wagner WS30 shredder, 30 kW, rotor width 140 cm with hydraulic slide, rotor with 74 reversible cutting blades, discharge and inclined conveying screw. Roller feed for heavy rolls with cutting device in the longitudinal direction to relieve the mill, frequency inverter-controlled drive, 3.5 kW. Cutting mill with 11 kW, downstream for parallel operation with shredder/roller feed, suction/conveying fan to the buffer silo with agitator, frequency inverter-controlled for discharge rate/dust protection. Feed screw for ground material. Conveyor belt, L 9 m x W 80 cm, metal detection bridge, frequency inverter controlled via load detection from the cutting compactor. Conveying screw for 100% ground material, stainless steel, L 4.5 m and diameter 100 mm. Cutting compactor, 138 kW, frequency inverter controlled, suction fan, water spray cooling, tangential to extruder ES 180 mm 30 LD with 2-stage vacuum degassing, including: Laser filter LF with diameter 500 mm / 2-disc system, discharge screw for contaminants with timer, melt pressure sensor, spare screens: 60 mesh 2x, 70 mesh. Strand die, 26 holes - interchangeable dies, year of manufacture 2021, melt pressure sensor, complete overhaul/replacement of wear parts in January 2026. Strand cooling water tank, L 700 cm x W 70 cm, stainless steel. Strand rollers made of plastic with stainless steel ball bearings, height-adjustable, year of manufacture 2023. Strand granulator SG 200 E with 7.5 kW as well as 1 spare granulator 5.5 kW for quick replacement during overhaul or cleaning/maintenance work. Granulate classification sieve, stainless steel, including conveying fan and pipes. BIG BAG filling frame, 2-place, with ladder and platform. Gsdpfx Ajzb Dr Sjglskd BIG BAG floor scale with receipt printer. Throughput material-dependent, up to 900 kg/h. Start-up, commissioning by our technicians, details and costs upon request - after consultation. Inspection in Wuppertal, appointment can be arranged shortly.

Condition: excellent (used), CATALOG NUMBER 7213 Gksdpfx Ae Af Uw Nsgljd TECHNICAL DATA - max cutting height 180mm - track width 400mm - shaft width 370mm - shaft diameter 60mm - max blade diameter 300mm - blade bore diameter 80mm - min workpiece length 630mm - max workpiece width 600mm from above: - pneumatic pressure - pawls - pressure shaft, metal 2 pcs - pawls - blade shaft - smooth pressure shaft - pawls - smooth pressure shaft from below: - metal shaft, pulling, toothed 2 pcs - pawls - track - blade shaft - track - continuously variable feed speed adjustment via frequency inverter - main motors 2x55kW - feed motor 4kW - hydraulic body lifting up/down - hydraulic adjustment of blade shafts - pump motor 0.37kW - central lubrication - extraction nozzle diameter 1x300mm, 1x380mm - dimensions L/W/H 3200x2350x2000mm - weight approximately 5500kg ADVANTAGES - Made in Italy - Two-shaft - Multi-blade saw, used, very good condition Net price: 218900 PLN Net price: 50507 EUR Net price calculated based on an exchange rate of 4.3 PLN/EUR (price may be subject to change in the event of significant exchange rate fluctuations)

Condition: good (used), For sale: used industrial submersible pump, KSB KRTF 100-250/74UG2-249, complete with control box, cables, and chain. The pump features a side discharge connection with a Storz-type coupling and a base for positioning the unit. Data from the nameplate: Gjdsz Spiqjpfx Aglskd Manufacturer: KSB Type: KRTF 100-250/74UG2-249 Capacity: 5–180 m³/h, maximum approximately 3000 l/min Head: 17.4–6.2 m Rated power P2: 7.5 kW Supply: 400/690 V, three-phase Frequency: 50 Hz Rotational speed: 1450 rpm Rated current: 15.3/8.4 A Maximum medium temperature: 40°C Degree of protection: IP68 Operating mode: S1 Insulation class: F Power factor cos φ: 0.81 Impeller diameter: 249 mm Included in the set: Pump with motor. Control box with buttons, switch, and operating hour counter. Power and control cables. CEE power plug. Chain. Storz-type discharge coupling.

Condition: excellent (used), Catalog number: 7649 TECHNICAL DATA inlet width: 900mm inlet height: 300mm shaft width: 1030mm Gksdpfx Ae Af Uxmjgled shaft diameter: 700mm blade length: 1030mm number of blades: 3 pcs screen dimensions: 70x70mm from below, 2 toothed pulling shafts lower shaft motor: 7.5kW from above, 2 toothed pulling shafts upper shaft motor: 7.5kW belt conveyor apron feeder with chain belt 5600mm + 10600mm, 2.2kW feeder belt width: 800mm main motor: 90kW reverse gear overall machine dimensions (L/W/H): 3300x3100x1700mm shredder base dimensions: 3300x2080x1940mm feeder/apron feeder base dimensions (L/W/H): 5600x900x1000mm + 10600x1050x1600mm feeder belt base dimensions: 5100x1300x2520mm total weight approximately: 16000kg ADVANTAGES – German production – chain-type apron feeder, equipped with scrapers – reverse gear – DTR documentation – used shredder, very good condition Net price: 209900 PLN Net price: 48800 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary with higher fluctuations)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, center width: 1,200 mm, overall weight: 7,000 kg, travel distance X-axis: 500 mm, travel distance Z-axis: 800 mm, controller model: Bosch Rexroth MTX, TECHNICAL DETAILS Center distance: 1,200 mm Max. outer diameter: 350 mm Max. workpiece weight between centers: 50 kg Cross slide, X-axis Travel, X-axis: 500 mm Max. speed: 30 m/min Resolution: 0.1 µm Longitudinal slide, Z-axis Travel, Z-axis: 800 mm Max. speed: 30 m/min Resolution: 0.0005–0.1 mm Multi-function head, B-axis Swivel range: -45° to +225° Swivel time for 180°: < 3 s Positional accuracy: 0.0002° Repeatability: 1″ Resolution: 0.001° External machining Max. machining length: 750 mm Peripheral speed: 50 corundum / 80 CBN Drive power: 15 kW Max. grinding wheel dimensions: Ø 400 × 50 × 152.4 mm Internal machining Max. bore diameter: 250 mm Max. bore depth: 235 mm Drive power S1: 1.8–7.5 kW Speed range: 30,000–50,000 rpm Workpiece spindle, C-axis Max. speed: 1,500 rpm Drive power: 1.8 kW Drive torque: 90 Nm Resolution of measuring system: 0.001° Roundness accuracy: 0.8 µm Positional accuracy: 0.0001° Tailstock Quill stroke: 50 mm / 80 mm Quill diameter: 60 mm Bearing: hydrostatic Gkodjzwm Akepfx Aglsd Fine adjustment for cylindricity corrections: ± 40 µm 3-point steady rest Clamping range, diameter: 20 – 150 mm Coarse adjustment: 40 µm Fine adjustment: 2 µm Adjustability: stepless MACHINE DETAILS CNC control: Bosch Rexroth MTX Dimensions & Weight Dimensions (L x W x H): 2,850 x 2,470 x 2,290 mm Weight: 7,000 kg EQUIPMENT 3-point steady rest

Condition: used, DVS UGRIND 800 is a CNC external and internal grinder, engineered for precision, high accuracy and reliability. Handles workpieces Ø 130–500 mm; Z axis 1200 mm, X axis 250 mm. Grinding spindle 25 kW; workpiece spindle motor 24 kW; speeds 0–500 t/min stepless; supply 50 Hz 3x 400 V; weight ~7000 kg; L2850×W2490×H2290 mm; operating time 12000 Heures. Accessories: coolant system, coolant filter system, measuring feeler gauge, set of flanges for internal grinding, set of flanges, lamp, tool cabinet, electronic handwheel. Capable of achieving tight tolerances; typical applications: automotive, machine tools, aerospace, medical, watchmaking. Gedpfx Agoyxnuaelskd

Condition: like new (used), Year of construction: 2025, functionality: fully functional, The FrymaKoruma MK180 is a high‑energy corundum stone mill designed for wet grinding and dispersion of liquid and pasty products, widely used in food, cosmetics, and chemical processing. The MK180 is a corundum stone mill used for dispersing and wet grinding of liquid and viscous materials Moody Direct . It operates by rotating a high‑speed rotor against a stationary stator, creating intense shearing, cutting, and crushing forces in the gap between the stones Moody Direct . This makes it suitable for fine, uniform particle size reduction. Throughput: 30–1000 kg/h Driving capacity: 11 kW, 3000 rpm / 50 Hz Pressure resistance: max. 6 bar Grinding gap: adjustable Tools: exchangeable corundum stones Dimensions (approx.): Gedpfx Ae Ai A Uteglskd A: 1030 mm B: 540 mm C: 620 mm Weight: 150 kg Product inlet/outlet: DN 65 / DN 80 Optional hopper: 20 L

Condition: like new (used), Year of construction: 2025, functionality: fully functional, The FrymaKoruma ML180 is a high‑throughput perforated disc mill used for pre‑grinding, pulping and mashing lumpy products such as fruits, vegetables, and pasty materials in food, cosmetic, and chemical production. What the ML180 Does The ML180 is designed for wet size reduction of solid or semi‑solid materials. A knife bar rotating at about 3000 rpm sits above a perforated disc and crushes and presses the incoming product through the disc’s holes, producing a uniform mash or slurry Moody Direct +1 . An ejector device beneath the disc draws the processed material to the outlet Moody Direct . Key Technical Specifications All specifications below come from the manufacturer’s documentation Moody Direct Gkjdpfxs Ai A Duj Aglsd : Throughput: 1000–12,000 kg/h, depending on product characteristics Driving capacity: 15 kW, 3000 rpm at 50 Hz Pressure resistance: up to 6 bar Product inlet: DN 65 Product outlet: DN 80 Optional hopper: 40 L Dimensions: approx. 950 × 430 × 450 mm Weight: approx. 250 kg

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand colour production system, the “Xerox Versant 180 Press” Items for sale: 1 x Xerox Versant 180 Press with the following specifications: incl. Fiery NX Pro-01 Includes A-CF01 paper deck Includes A-GW03/A-FN13 finisher Includes duplex ADF / R-ADF Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 1,096,427 Black: Approx. 661,731 Colour: Approx. 434,696 Condition: Gkjdpfx Agozxwypolsd This is a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested for functionality A test print can be seen in the photo Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: good (used), Nagel Citoborma 180 Paper Drill This machine is 100% functional. This is the latest model. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the drill has an automatic table lock that releases after each cycle. Very good condition. Solid construction – weight 65 kg. 230V power supply Godoz Rk Hxopfx Aglskd One drilling head. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been serviced. Includes drills and tools, a new cutting stick, and an instruction manual.

Condition: used, Year of construction: 2001, machine/vehicle number: 11572, functionality: fully functional, operating hours: 47,262 h, overall weight: 1,950 kg, The BTSA 180 is a Bruderer high-speed precision stamping press with a nominal force of 180 kN (18T). It is designed for continuous production using progressive dies with variable stroke rates of 100 to 1300 strokes per minute. The press is equipped with a Bruderer BZV 60 strip feed, which processes strip widths up to 60 mm and material thicknesses up to 2 mm. The stroke is adjustable between 8 and 40 mm, and the strip feed height is adjustable between 50 and 100 mm, to accommodate different tools and material profiles. Additionally, a Siemens-manufactured Bruderer U control system is installed. The machine is partially functional: The buttons responsible for the two-hand operation respond with some delay in setup mode when threading the material. The machine's spring dampers are worn, causing the machine to vibrate during continuous operation, which does not affect production. The rubber mounts for the slides are brittle and are breaking off. The UVV inspection for 2025 has been carried out, as well as the annual maintenance for 2025. Gkjdez H H Dqjpfx Agled Nominal force: 180 kN (18T) Stroke rate: 100-1300 strokes per minute (variable) Strip feed: Bruderer BZA 60 Adjustable stroke: 8-40 mm Main drive: 16 kVA Power supply: 400V / 50Hz Table area: 300x400 mm Strip feed height (adjustable): 50-100 mm Max. strip width: 60 mm Max. material thickness: 2 mm Machine dimensions: approx. 1300x1000x2300 mm Weight: 1950 kg Operating hours: approx. 47262 The machine will be dismantled in week 46. Removal is planned before the end of December, as a crane will already be on-site by then to load the machine.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, power: 2 kW (2.72 HP), input frequency: 60 Hz, input voltage: 575 V, overall weight: 750 kg, Brand new twin-shaft batch mixer from BHS-Sonthofen for the intensive and homogeneous mixing of various bulk materials. Technical data: Type: DKXC 180 Year of manufacture: 2020 Nominal capacity: 180 liters / 0.18 m³ Drive: 2 × 5.5 kW Voltage: 575 V / 60 Hz Weight: approx. 750 kg pneumatically operated discharge flap Location: Canada The electrical control system was manufactured according to Canadian regulations and must be inspected for operation in Europe and, if necessary, modified to comply with European regulations. Gkedozumpxjpfx Aglod The mixer has never been used. Technical specifications are subject to change without notice and are offered for sale subject to prior sale.

Year of construction: 2023, operating hours: 400 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 9457SH, ElectroHeat Conveyor Oven - Year 2023 High-quality ElectroHeat conveyor oven in excellent condition, manufactured in 2023. The oven is designed for continuous heat treatment processes and features four independently controlled heating zones. Technical Specifications Manufacturer: ElectroHeat Sweden AB Model / Project No.: 9457SH Type: Conveyor Oven Year: 2023 Maximum temperature: 180°C Power supply: 3 x 400 V + N / 50 Hz Rated current: 50.56 A Internal dimensions: Width: 700 mm Height: 700 mm Length: 5,950 mm Maximum load: 300 kg evenly distributed on the conveyor Gsdpfx Ago Aayxzolekd Approximate weight: 2,800 kg Recommended compressed air supply: 5 bar CE marked Features 4 independently controlled temperature zones Automatic conveyor system HMI touchscreen control panel Integrated safety light barriers Pneumatic vertical doors Continuous production operation Suitable for industrial drying, curing, heating and thermal processing applications The oven is currently installed and can be inspected under power by appointment. Condition Very good used condition. Delivery Available immediately, subject to prior sale. Sold as seen and tested.

Condition: used, Year of construction: 2020, Rovema horizontal cartoning line with end-load design, integrated conveyor, laser marking system, color touchscreen HMI, automatic product feed, full safety guarding, 400V 3-phase power, approx. 200 cartons/minute, handles cartons up to 13.8" x 7.9" x 4.7" (350 x 200 x 120 mm), net weight approx. 6,600 lbs (3,000 kg), previous use in food packaging industry. Gkjdo Ai Hrajpfx Agljd

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: ab0307002198, Autobag AB 180 OneStep – fully automatic bag packaging machine with thermal transfer printer Year of manufacture: 2007 | Location: 41564 Kaarst-Holzbüttgen Delivery and collection possible by arrangement. For sale is a used Autobag AB 180 OneStep (Automated Packaging Systems) – a proven, robust, and flexible bag packaging machine with an integrated thermal transfer printer. Equipment: • STANDARD SEAL FLATTENER • STATIC BACK SHELF (NO SUPPORT) • AB180 ONESTEP 203 dpi PRINT KIT (Thermal transfer printer PI-412c) • FUNNEL SIZE A12 • BD100 (Orange Loop / Bag De-aerator) Also included in the scope of delivery: 1 box with 13 film rolls (Autobag chain bags) Mode of operation (manufacturer's description): The AB 180 OneStep feeds an Autobag chain bag unwound from a roll through the printer, opens it by means of compressed air, and prepares it for filling. The products are placed manually or via feeding systems into the bag. Subsequently, the bag is sealed using a foot switch or automatically. The integrated thermal transfer printer eliminates the need for offline labeling – printing and packaging are carried out in one step (“Print-n-Pack” / Next-Bag-Out technology). Ideal for fulfillment, mail order, spare parts, small and medium-sized series with frequent product changes. Gjdpfx Aez Spqxeglokd Technical data (according to the product data sheet): • Weight: 142 kg • Dimensions: approx. L 1,700 × W 850 × H 1,150 mm • Electrical: 110/220 V, 50/60 Hz switchable • Compressed air: 150 l/min at 5.5 bar (dry, clean air) • Passage: up to 108 mm • Bag thickness: 35–100 µm • Bag sizes: width 50–270 mm | length 140–630 mm • Performance: up to approx. 30 bags/minute (with printing) We will gladly send you the product data sheet and other documents upon request. If you are interested, I look forward to hearing from you – I will be happy to prepare an individual offer for you, including shipping costs.

Condition: used, Year of construction: 2017, machine/vehicle number: 930048019, power: 32.8 kW (44.60 HP), input voltage: 380 V, total length: 2,878 mm, total width: 1,441 mm, total height: 2,682 mm, overall weight: 1,797 kg, number of chambers: 4, number of shelf rows: 4, control type: manual, fuel type: electric, BONGARD ORION Series Electric power 4 openings on 4 baking levels 1 baking path per level Deck dimensions 800x1800mm Integrated loading elevator Total baking area 5.8 m² Year 2017 Electrical power 32.8 kW Power supply 400 V Serial No. 930048019 Electrical protection 80 A Independent ERGOCOM control per level Gjde Ahym Ujpfx Aglskd Refractory soles, 20 mm thick Stainless steel electric heating elements Heating element protection in the arch Independent steam generator per level Individual water dosing per level Steam injection from the rear Anti-splatter steam diffuser Internal chamber lighting Removable glass doors Brushed stainless steel facade External dimensions 1441x2878x2682 mm Weight 1797 kg Used electric deck oven, 4 openings, BONGARD ORION EvO E801/4-180 – 5.8 m² baking area General description The used electric deck oven with 4 openings, BONGARD ORION EvO E801/4-180, is intended for bakeries and baking-pastry workshops seeking baking on fixed decks. This model, also referenced as 801/4.180 in the manufacturer's documentation, has 4 baking levels, with a baking path of 800 mm in width and a deck depth of 1,800 mm. Its total baking area of 5.8 m² allows for organizing batches on multiple levels. Designed for bread and viennoiserie production, this electric oven combines refractory decks, heating elements, and independent steam generation per level.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, CATALOGUE NUMBER 7563 Technical data: - track width 340mm - shaft width 360mm - disc bore diameter 70mm - max disc diameter 315mm - max cutting height 180mm * from above - feed shaft, toothed, pneumatically pressed - 2 rows of ejectors - 3 smooth, sliding pressure rollers - ejectors - shaft with saws - 3 smooth, sliding pressure rollers - ejectors * from below - feed shaft, toothed - track - shaft with saws - track - stepless feed speed adjustment via frequency inverter - main motor 2x55kW - feed motor 4kW - electric lifting of the upper body up/down Gjdpfx Agezxqtvslskd - electric adjustment of the saw shafts - central lubrication - diameter of the dust extraction nozzle 2x150mm - dimensions L/W/H 2800x2400x1900mm - weight approx. 5000kg ADVANTAGES – Made in Italy – Two-shaft – Ideal for large components – Multi-blade saw, used, very good condition Net price: 129900 PLN Net price: 30209 EUR, depending on the exchange rate of 4.3 EUR (Prices are subject to change due to significant fluctuations)

Condition: refurbished (used), battery capacity: 930 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,028 mm, total width: 1,000 mm, Tested forklift battery for your forklift truck - 80V 6PZS 930Ah - DIN A + 1 year warranty + Includes Aquamatik water refilling system + Includes end cell connectors & REMA 320 plug (other plug types can be fitted if required) + Capacity: min. 90-100% (C5 capacity test protocol will be provided on delivery) + Year of manufacture: 2024 Dimensions: Length 1,028 mm Width 1,000 mm Height 784 mm Weight: approx. 2,240 kg Suitable for the following models, among others: Linde E 100 / 600 - 1471-00 Linde E 120 / 1200 - 1471-00 Linde E 120 / 600 - 1471-00 Linde E 140 / 1200 - 1471-00 Linde E 140 / 600 - 1471-00 Linde E 150 / 1200 - 1471-00 Linde E 150 / 600 - 1471-00 Linde E 16 - 386-02 - side battery change Linde E 160 / 1200 - 1471-00 Linde E 160 / 600 - 1471-00 Linde E 180 / 600 - 1471-00 Linde E 180 / 900 - 1471-00 Linde E 35 / 600 L - 388-00 Linde E 40 - 388-00 Linde E 40 / 600 HL - 1254-01 Linde E 40 / 600 HL - 388-00 Linde E 40 / 600 L - 388-00 Linde E 40 HL - 388-00 Linde E 45 / 600 HL - 1254-01 Linde E 45 / 600 HL - 388-00 Linde E 45 / 600 HL - 388-00 - side battery change Linde E 45 / 600 L - 388-00 Linde E 45 HL - 388-00 Linde E 50 - 388-00 Linde E 50 / 600 HL - 1254-01 Linde E 50 / 600 HL - 388-00 Linde E 50 / 600 L - 388-00 Linde E 50 HL - 1254-01 Linde E 50 HL - 388-00 Linde E 50 L - 388-00 Linde E100 / 1200 - 1471-00 Linde K - 5231-00 Linde K - 5231-00 - side battery change Linde P 250 - 127-00 Linde P 250 - 127-00 - vertical battery change Godpfxsy Rnpzj Aglskd Linde P 250 L - 127-05 Linde P 250 LWB - 5007-10 - side battery change Linde P 250 LWB - 5007-10 - vertical battery change Linde P 350 - 5007-10 - side battery change Still MX-X Still R 60-40 Still R 60-45 Still RX 60-40 Still RX 60-50 Jungheinrich EFG Jungheinrich EFG 540 Jungheinrich EFG 550 Jungheinrich EFG VAC 35 Jungheinrich EKX 515 Jungheinrich EKX 516 Toyota 7FBMF45 Crown TSP 6000-D Crown TSP 7000 Mitsubishi FB45-2 OM-Pimespo-Fiat XE 50 Steinbock-Boss WA 15 Other common battery sizes available on request. Transport available.

Condition: used, Andreas Schmid Climate and temperature test chamber KK 7.200/-50/180S 7,200-liter test chamber / Year of manufacture: 2016 Temperature and humidity tests Used climate chamber with a separate air-cooled Güntner condenser. Technical data: Manufacturer: Andreas Schmid Anlagentechnik GmbH Type: KK 7.200/-50/180S Year of manufacture: 2016 Test chamber volume: 7,200 liters Temperature specifications according to the manufacturer: Temperature control system: -50 °C to +180 °C Previously used for tests on active batteries. Air Liquide gas supply and pressure regulating unit: Completely mounted in a metal cabinet. Pressure regulator, pressure gauge, shut-off and flush valves, as well as pipelines and connecting hoses. All components installed on a common mounting plate in the cabinet. Climate range: +10 °C to +95 °C Humidity range: 10 % to 95 % RH According to the manufacturer's climate diagram Steam humidifier: 8 kg/h Heating: 5.0 K/min (-20 to +120 °C) Cooling: 5.0 K/min (+120 to -20 °C) Without test load Heating power: 36 kW Air circulation: 3 fans / 8,000 m³/h Refrigerant: R404A / 55 kg Connection: 400 V / 3 phases / 50 Hz Max. current: 100 A Internal dimensions (W x D x H): 3,000 x 2,000 x 1,200 mm External dimensions: 3,300 x 3,200 x 2,500 mm With attachments: 3,600 x 3,300 x 3,100 mm Weight of chamber: 4,500 kg Empty weight of condenser: 460 kg Total weight: 4,960 kg without additional parts Equipment: V2A stainless steel interior Double-leaf door 2 heated viewing windows, each 600 x 500 mm 4 heated feedthroughs DN 150 Pressure equalization / Condensate drain Halogen lighting 200 W Program controller SE-702 STANGE ECS-2000-1 software on CD License documents and USB dongle available License rights not checked Güntner condenser, air-cooled: Type: GVV 090.2D/1-N(D).E Year of manufacture: 2016 Dimensions: 2,700 x 930 x 1,650 mm Application areas: Temperature and humidity tests Environmental simulation / Quality assurance Material and component testing Condition: Used Optical condition according to images Scope of supply: Andreas Schmid climate chamber Separate Güntner condenser Gkjdpe Ai I T Tsfx Agled 1 x Air Liquide gas control unit, completely mounted in a metal cabinet, with existing equipment as shown in the images STANGE CD, dongle, license documents Technical documentation as shown in the images Shipping by freight forwarder possible. Errors and prior sale excepted. We will be happy to answer any questions by phone.

Condition: excellent (used), Year of construction: 2010, operating hours: 49,000 h, functionality: fully functional, Technical specifications TM 180/750 with Wittmann robot Clamping unit Clamping force: 1800 kN Horizontal tie bar spacing: 520 mm Vertical tie bar spacing: 520 mm Tie bar diameter: 75 mm Minimum mold height: 225 – 550 mm Opening stroke: 480 mm Maximum mold thickness: 1030 mm Injection unit Screw diameter: 45 mm Specific injection pressure: 2116 bar Godpfx Aj Ahpvkoglokd Injection volume: 358 ccm Screw ratio L/D: 22 Screw stroke: 225 mm Nozzle stroke: 350 mm Number of control zones: 1+5 Wittmann robot W811-0245 Year of manufacture: 2010 X-axis: 550 mm Y-axis: 1200 mm Z-axis: 2000 mm

Condition: good (used), Used in good condition Gkodpfovt Szzjx Aglod 4 pieces in stock

Condition: used, Vötsch Climate testing chamber / Temperature and humidity testing chamber Vötsch VC³ 7250 2,500-liter test chamber -70 °C to +180 °C / Touch panel control Water-cooled For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. For temperature and humidity tests, environmental simulation, and component testing. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 7250 Test chamber volume: 2,500 liters Weight: approx. 1,450 kg (manufacturer's specification) Temperature range: -70 °C to +180 °C Heating: 2.26 K/min Cooling: 1.35 K/min Time deviation: ±0.3 to ±1 K Homogeneity: ±0.5 to ±2 K Thermal compensation: 5,000 W at +20 °C at -20 °C (manufacturer's data) Internal dimensions (W × D × H): approx. 1,995 × 1,250 × 975 mm External/installation dimensions (W × D × H): approx. 3,750 × 1,450 × 2,260 mm Dimensions according to drawing. Electrical data according to nameplate: Mains connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 17 kW Rated current: 30 A Degree of protection, control cabinet/control panel: IP54 Refrigerant according to label: R452A R23: 1.0 kg Max. low pressure: 18 bar(g) Max. high pressure: 25 bar(g) Standby pressure: 12 bar(g) Equipment: Touch panel operation Double-leaf test chamber door with viewing window Test chamber lighting: 2 × 24 V / 50 W Test item passage Ø 80 mm according to drawing Control cabinet and main switch panel Pressure equalization opening Condensate tray Water tank with level indicator Supply and disposal connections Test chamber load according to the manufacturer: Shelf: 30 kg; reinforced: 75 kg Insert shelf: 150 kg Test chamber total: max. 300 kg Special heavy-duty floor: max. 500 kg (optional) Application areas: Temperature and humidity testing Environmental simulation / Material testing Electronics and component testing Quality assurance / Research Godpfxs Ai Scyo Agljkd Condition: Used Optical condition according to pictures. Scope of delivery: 1 × Vötsch VC³ 7250 climate testing chamber Equipment according to pictures. Shipping by freight forwarder is possible. Subject to changes, errors and prior sale. We will gladly answer any questions by telephone.