Used Gesan Dps 140 for sale (8,265)

Condition: good (used), turning diameter over bed slide: 1,400 mm, turning length: 5,000 mm, Centre lathe Hedpfx Ajwvirhed Nsng ZERBST - DPS 1400 MACH-ID 582 Make: ZERBST Type: DPS 1400 Year: 1976 DBC Turning Length: 5000mm Swing over bed Ø: 1400mm Swing over cross slide Ø:1250mm Spindle bore: 100mm

Condition: used, We offer a used compensation plate here. Technical data for the compensation plate: Hnedsx Trhtjpfx Ad Nsg Manufacturer: Meta Included in the delivery: 01x compensation plate, used Material color: sendzimir galvanized Dimensions: 140 x 140 mm Material thickness: approx. 3.00 mm Bore diameter: approx. 11 mm Hole spacing (center – center): approx. 90 mm Weight: 0.45 kg each Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about this item: This item is offered for collection only. Any requested transport or shipment of this item will incur additional costs, which can be provided upon request depending on delivery location and scope.

Condition: excellent (used), Catalogue number 7733 TECHNICAL DATA - Belt width: 150mm - Oscillation - Vertical oscillation movement - 2 rotation speeds - Work table: 1180x370mm - Work table adjustment: up/down, front/back and at an angle - Motor: 3kW - Platen - for precise grinding - With fan - Effective sanding length on belt: 700mm - Top/bottom milling cutters for edge chamfering - Extraction port diameter: 70mm - Dimensions (L/W/H): 1550/1400/1300mm - Weight: 490kg ADVANTAGES – with oscillation – with platen – with fan – includes milling cutters for edge processing/chamfering – for both curvilinear and straight sanding – unpainted – used machine, in very good condition Hnodpsxdc Enofx Ad Neg Net price: 7500 PLN Net price: 1780 EUR (based on exchange rate 4.2 EUR) (Prices may vary with greater rate fluctuations)

Condition: refurbished (used), battery capacity: 930 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,028 mm, total width: 1,000 mm, Tested forklift battery for your forklift truck - 80V 6PZS 930Ah - DIN A + 1 year warranty + Includes Aquamatik water refilling system + Includes end cell connectors & REMA 320 plug (other plug types can be fitted if required) + Capacity: min. 90-100% (C5 capacity test protocol will be provided on delivery) + Year of manufacture: 2024 Dimensions: Length 1,028 mm Width 1,000 mm Height 784 mm Weight: approx. 2,240 kg Suitable for the following models, among others: Linde E 100 / 600 - 1471-00 Linde E 120 / 1200 - 1471-00 Linde E 120 / 600 - 1471-00 Linde E 140 / 1200 - 1471-00 Linde E 140 / 600 - 1471-00 Linde E 150 / 1200 - 1471-00 Linde E 150 / 600 - 1471-00 Linde E 16 - 386-02 - side battery change Linde E 160 / 1200 - 1471-00 Linde E 160 / 600 - 1471-00 Linde E 180 / 600 - 1471-00 Linde E 180 / 900 - 1471-00 Linde E 35 / 600 L - 388-00 Linde E 40 - 388-00 Linde E 40 / 600 HL - 1254-01 Linde E 40 / 600 HL - 388-00 Linde E 40 / 600 L - 388-00 Linde E 40 HL - 388-00 Linde E 45 / 600 HL - 1254-01 Linde E 45 / 600 HL - 388-00 Linde E 45 / 600 HL - 388-00 - side battery change Linde E 45 / 600 L - 388-00 Linde E 45 HL - 388-00 Linde E 50 - 388-00 Linde E 50 / 600 HL - 1254-01 Linde E 50 / 600 HL - 388-00 Linde E 50 / 600 L - 388-00 Linde E 50 HL - 1254-01 Linde E 50 HL - 388-00 Linde E 50 L - 388-00 Linde E100 / 1200 - 1471-00 Hnodpewzvw Uefx Ad Njg Linde K - 5231-00 Linde K - 5231-00 - side battery change Linde P 250 - 127-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 L - 127-05 Linde P 250 LWB - 5007-10 - side battery change Linde P 250 LWB - 5007-10 - vertical battery change Linde P 350 - 5007-10 - side battery change Still MX-X Still R 60-40 Still R 60-45 Still RX 60-40 Still RX 60-50 Jungheinrich EFG Jungheinrich EFG 540 Jungheinrich EFG 550 Jungheinrich EFG VAC 35 Jungheinrich EKX 515 Jungheinrich EKX 516 Toyota 7FBMF45 Crown TSP 6000-D Crown TSP 7000 Mitsubishi FB45-2 OM-Pimespo-Fiat XE 50 Steinbock-Boss WA 15 Other common battery sizes available on request. Transport available.

Condition: used, Luenette Height without foot 350 mm Hnedpfx Aecrcxpjd Njg Diameter 140 mm Foot width 40 mm

Condition: like new (used), Year of construction: 2020, operating hours: 10 h, functionality: fully functional, machine/vehicle number: C1-140_10, CrimpOne C1-140 Hydraulic Hose Crimper Technical Specifications Max. crimping force: 1400 kN Crimp range: 10 - 61 mm Max. hose size: 1 1/2 inch Die type: 140 Max. opening: +25 mm Max. die length: 80 mm Servo motor: 3 kW Power supply: 380 V Crimps per hour: 850 pcs Length: 600 mm Width: 435 mm Height: 630 mm Weight: 135 kg Hnjdpfoxd U Nlsx Ad Nog Noise level: 71 dB(A) Available immediately from stock!

Condition: good (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 491 kW (667.57 HP), type of input current: three-phase, type of cooling: water, overall weight: 4,600 kg, input frequency: 50 Hz, Equipment: compressor, cooling unit, Used, well maintained Trane RTAC 140 Air-cooled Helical-Rotary Liquid Chiller Brand Trane RTAC 140 Product type Air Cooled Chiller year of construction:2008 Capacity kW 491.9 Refrigerant HFC 134a Refrigerant Circuits 2 Evaporator Model EH140 2x Trane CHHP012TKEON092A compressors Water Storage l 112 Minimum Flow l/s 13 Maximum Flow l/s 44 Number of water passes 2 Condenser Fans Quantity (1) 4/4 Diameter mm 762 Total Air Flow 35.45 m3/s Refrigerant Freon Refrigerant Type R 134 A 74kg Weight in kg. 4500 Sizes 5041x2260x2750mm (LxWxH) Hnodpfx Aoula Tred Njg

Condition: good (used), Included in delivery: Hnjdpfx Aoipugged Njg 01x holder f. slide-through protection, used material color: sendzimir galvanized Manufacturer: SLP leg A: approx. 200 x 140 mm leg B: approx. 200 x 38 mm opening dimension: approx. 52 x 32 mm for rectangular tube: 50 x 30 mm Weight/pc.: 0.930 kg

Condition: excellent (used), Catalogue number 7445 TECHNICAL DATA - Track width: 250 mm - Roller width: 400 mm - Max. blade diameter: 400 mm - Blade bore diameter: 80 mm - Max. cutting height: 140 mm - Table width with clearance: 730 mm - Table length: 2120 mm *From above: - Pawls - Pressure roller, smooth - Pawls - Pressure roller, smooth - Saw shaft - Smooth pressure rollers, 2 pcs. From below: - Guide - Sliding shaft, smooth - Pawls - Track - Central lubrication - 2 lasers - Infinitely variable feed speed adjustment - Feed motor: 1.1 kW - Main motor: 37 kW - Electric lifting of the frame: 0.75 kW - Electric lifting of the saw shaft: 0.75 kW - Extraction port diameter: 200 mm - Overall dimensions (L/W/H): 2200x1850x2100 mm Hsdpfxox Tgxms Ad Nsng - Weight approx.: 3000 kg ADVANTAGES – German manufacture – Laser – Electric lifting of the frame and shaft – Infinitely variable feed speed adjustment – Used multi-blade saw, in very good condition Net price: 109,900 PLN Net price: 26,160 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant rate fluctuations)

Condition: good (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 495 kW (673.01 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,550 kg, input voltage: 400 V, total width: 2,450 mm, total length: 5,050 mm, total height: 2,750 mm, input current: 170 A, input frequency: 50 Hz, Equipment: compressor, freezer, Used, well maintained Trane RTAC 140 Air-cooled Helical-Rotary Liquid Chiller Brand Trane RTAC 140 Product type Air Cooled Chiller Capacity kW 491.9 Refrigerant HFC 134a Refrigerant Circuits 2 Evaporator Model EH140 2x Trane CHHP012TKEON092A compressors Water Storage l 112 Minimum Flow l/s 13 Maximum Flow l/s 44 Number of water passes 2 Condenser Fans Quantity (1) 4/4 Hnodpst Tfbqsfx Ad Njg Diameter mm 762 Total Air Flow 35.45 m3/s Refrigerant Freon Refrigerant Type R 134 A 74kg Weight in kg. 4500 Sizes 5041x2260x2750mm (LxWxH)

Condition: good (used), Technical data for the shim: Manufacturer: Bito Included in delivery: 01x shim, used Material color: sendzimir galvanized total width: approx. 140 mm Hnjdji Hknyepfx Ad Nog total depth: approx. 105 mm material thickness: approx. 1,50 mm hole distance (center - center hole): approx. 110 mm Weight: approx. 0.15 kg | pcs.

Condition: excellent (used), CATALOG NO. 7532 TECHNICAL DATA - Track width: 340mm Hedex S I Utepfx Ad Nong - Shaft width: 400mm - Shaft diameter: 65mm - Max. saw blade diameter: 400mm - Saw blade bore diameter: 80mm - Max. cutting height (with 400mm blade): 140mm - Table width with clearance: 870mm - Table length: 2140mm From the top: - Pawls - 1 pressure idler roller - Pawls - Sliding pressure roller - Saw shaft - Sliding pressure roller - Sliding pressure shaft From the bottom: - Guide rail - Idler roller - Pawls - Track - Electric body lifting: 0.55kW - Electric saw shaft lifting: approx. 0.55kW - Central lubrication - Stepless feed speed adjustment via frequency inverter (1.5kW): 8-48m/min - Main motor: 55kW - Extraction nozzle diameter: 300mm - Overall dimensions (L/W/H): 2540x1480x2570mm - Weight approx.: 3500kg ADVANTAGES – Manufactured in Germany – Fitted with 5 pcs 350mm diameter saw blades – Electric height adjustment – Operator control panel – Stepless feed speed adjustment – Used multi-rip saw, in very good condition Net price: 145,900 PLN Net price: 34,730 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary due to significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2002, overall weight: 110 kg, type of input current: three-phase, input voltage: 400 V, fuel: domestic gas H, input frequency: 50 Hz, Equipment: type plate available, For sale in excellent condition HOVAL HG-E 300-1650kw industrial gas burner with control, DUNGS assembly manufacturer HOVAL HG-E 140 year of manufacture: 2002 heating output min.-max. 300–1650 kw gas type: natural gas Gas flow min.–max. [Stm3/h] 32–174 Gas pressure 90-220 Mbar DUNGS MB-DLE 420 B01 S22 Gas multiblock gas regulator Tightness checker Dungs VPS-504 S02 Hnedpfsvmhq Eox Ad Neg Dungs LGW 50A pressure switch Electrical connection 400v 3-phase 50Hz Total energy consumption 2.7kw Fan motor: 2.2kw Protection IP40 Flame tube diameter: 230mm flame tube length: 260mm Gas connection: Rp 2 - DN65 - DN80 Two-stage / two-stage sliding / modulated regulation machine length: 1100mm width: 700mm height: 500mm Dc200Rj weight 110 kg

Condition: good (used), Technical data for pallet rack beam: Racking system: Stow Type: Pal Rack NS Included in delivery: 01x pallet rack beam, used Material color: RAL 2004 orange Box profile: 140 x 50 mm Beam type: PNB0444 Clasp: 4 HK (hooks) Clear span: approx. 3,900 mm Max. load per pair of beams: 2,300 kg with evenly distributed load 02x locking pins, used Design: fully galvanized For securing the longitudinal beams against unintentional lifting Note: Some beams have 5-6 holes on the side. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Hedswqbzwjpfx Ad Neng General information about the item: This item is offered for collection only. Any transport or shipping of this item is subject to additional costs, which can be requested from us depending on the delivery location and scope.

Condition: good (used), Year of construction: 2002, functionality: fully functional, input frequency: 50 Hz, For sale in excellent condition HOVAL HG-E 300-1650kw industrial gas burner with control, DUNGS assembly manufacturer HOVAL HG-E 140 year of manufacture: 2002 heating output min.-max. 300–1650 kw gas type: natural gas Gas flow min.–max. [Stm3/h] 32–174 Gas pressure 90-220 Mbar DUNGS MB-DLE 420 B01 S22 Gas multiblock gas regulator Tightness checker Dungs VPS-504 S02 Dungs LGW 50A pressure switch Electrical connection 400v 3-phase 50Hz Total energy consumption 2.7kw Fan motor: 2.2kw Protection IP40 Flame tube diameter: 230mm flame tube length: 260mm Gas connection: Rp 2 - DN65 - DN80 Hnodpfx Adeu A Illo Neg Two-stage / two-stage sliding / modulated regulation machine length: 1100mm width: 700mm height: 500mm weight 110 kg

Condition: good (used), Technical data for the shim: Manufacturer: Bito Included in delivery: 01x shim, used Material color: sendzimir galvanized total width: approx. 140 mm total depth: approx. 105 mm Hedpfsi Hknvsx Ad Nsng material thickness: approx. 4,00 mm hole distance (center - center hole): approx. 110 mm Weight: approx. 0.41 kg | pcs.

Condition: good (used), Technical data for pallet rack beam: Racking system: META Thyssen Included in delivery: 01x Pallet rack beam, used Material color: silver grey Beam type: HN 140|15 Box profile: 140 x 50 mm Connector: 4 HK (hooks) Clear span: 3,600 mm Max. load per pair of beams: 3,000 kg with evenly distributed load 02x Safety pins, used Design: fully galvanized For securing the horizontal beams against accidental lifting Your contacts at our company: Mr. Andre Evering Hjdpfjxaz N Rox Ad Njng Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. If transport or shipping of this item is required, additional costs will be incurred, which can be provided upon request depending on the place of delivery and the scope of supply.

Condition: good (used), Technical data for pallet rack beam: Racking system: Metall Sistem Type: Unipal Scope of delivery includes: 01x pallet rack beam, used Material color: yellow Hedpfxsxb Tp Ej Ad Nsng Box profile: 140 x 45 mm Clear width: 1,800 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur extra costs, which can be quoted separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical Data for the Pallet Rack Beam: Racking System: META Thyssen Scope of delivery includes: 01x Pallet rack beam, used Hnedpfsw Ektrsx Ad Nsg Material color: orange Beam type: HS 140|15 Box profile: 140 x 50 mm Connection: 4 HK (hooks) Clear span: 3,600 mm Max. load per pair of beams: 3,300 kg, with evenly distributed load 02x Safety pins, used Finish: fully galvanized For securing the longitudinal beams against accidental lifting Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Any transport or shipment of this item beyond that can be arranged at additional cost, which can be individually requested from us depending on delivery location and scope.

Condition: excellent (used), FOD BYDGOSZCZ Shaft Multi-Blade Saw* DPPA III 50 650/140 Catalogue number: 7318 TECHNICAL DATA - Maximum cutting height: 140 mm - Maximum workpiece width: 700 mm - Working width of shaft with saw blades: 650 mm - Maximum saw blade diameter: 400 mm - Arbor hole diameter: 70 mm From above: - Kickback pawls Hnjdpfxsx Tgtks Ad Nog - 2 driven, toothed feed rollers From below: - Kickback pawls - 2 driven, smooth feed rollers - Saw shaft - Ribbed feed roller - Stepless feed speed adjustment with inverter - Feed motor: 4.4 kW - Main motor: 30 kW - Machine dimensions (LxWxH): 2500 x 1400 x 1900 mm - Weight: approx. 2500 kg – Made in Poland – Used machine, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR (based on 4.2 EUR exchange rate) (Prices may vary due to significant exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized representative of the manufacturer. All trademarks and names are used solely for identification and informational purposes. We only resell products that have been previously placed on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: used, Year of construction: 1990, I - beam section - flat steel 140 x 140 x 13 mm I-beam section - upend 120 x 120 x 13 mm L-beam 130 x 130 x 12 mm round bar steel 85 mm bending capacity - flat iron 125 25 mm flat steel 65 x 65 mm including various rollers: Pipe Ø: 219 mm (tool/roller Ø 535 mm) Hjdpfxott Ecdo Ad Nong 140 mm (tool/roller Ø 420 mm) 273 mm (tool/roller Ø 520 mm) 203mm 168.3 mm (tool/roller Ø 500 mm) 75 mm (tool/roller Ø 400 mm) 49 mm (tool/roller Ø 420 mm) 48.3 mm (tool/roller Ø 420 mm) 22.5 mm (tool/roller Ø 420 mm) 32/32.5 mm (tool/roller Ø 420 mm) 60 mm (tool/roller Ø 420 mm)

Condition: good (used), Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower Hodpfx Ascnpxgod Njng -Clamping block: for workpiece clamping -Width: 140 mm -Length: 370 mm -Height: 53 mm -Threaded holes: M12 -Number: 4x milling support available -Price: per piece -Weight: 21 kg/piece

Condition: used, Technical details: faceplate diameter: 1400 mm swing diameter: 2000 mm turning height: 1270 mm main drive: 80 kW faceplate speeds from - to: 1 - 355 U/min max. workpiece weight: 6.000 kg milling motor: 37 kW milling head speed: 7 - 3000 U/min milling spindle - taper: ISO 50 cross rail adjustment - vertical: 800 (8 x 100 mm) mm ram head dimension: 240 x 240 mm max. ram stroke: 1250 mm Hjdpfxjvb Dcme Ad Nsng weight of the machine ca.: 50 to total power requirement: 133 kVA dimensions of the machine ca.: 11 x 5 x 6,4 m Machine general overhould in 2008 and equiped with CNC SIEMENS 840 D control - tool changer for 72 tools - C-axis, live tooling - angular- and straight tool holder head with CAPTO taper - Transmit function - complete splash housing - coolant device, chip conveyor - diverse accessories *

Condition: excellent (used), Vecoplan 350/140 Chipper / Shredder Catalogue No. 7742 TECHNICAL DATA - Infeed width: 350 mm - Infeed height: 140 mm - Shaft width: 345 mm - Shaft diameter: 290 mm - Number of knives: 2 pcs - Screen size: 55x55 mm - Toothed feed shaft from above and below - Shaft motors: 2×1.5 kW - Electric auto-reverse (adjustable) - With vibrating chute - Vibrating chute length/width: 3750×355 mm - Full vibrating chute dimensions: 3750x620x1210 mm - Discharge with conveyor belt: 2970x340 mm - Conveyor belt dimensions: 3000x630x750 mm - Main motor: 22 kW - Dimensions (L/W/H): 3000x1100x1500 mm - Weight: approx. 2500 kg ADVANTAGES Hjdpfxsxcx S Io Ad Njng – German-made – with vibrating chute – With discharge conveyor – Auto-reverse – Used chipper, in very good condition Net price: 47,900 PLN Net price: 11,400 EUR depending on the exchange rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 250 mm with top plate Hodev N Ubcjpfx Ad Neng -Type: 1-40/28x250/0 TGL10906 -Piston rod: Ø 25 mm -Recordings: mm -Dimensions: Ø 255 x 465 mm -Weight: 9.3 kg