Used welding tables for sale (604)

Condition: new, table diameter 340 mm Rodpfxsxabm No Abbjt table load 160 horizontal kg. table load 100 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.6 - 6.0 U/min bore 60.0 mm motor 230 Volt weight of the machine ca. 56.0 kg range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: new, table diameter 500 mm table load 300 horizontal kg. table load 150 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.5 U/min bore 90.0 mm table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90.0 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch Redpfexabl Ssx Abbjt

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. Rjdoxaatnspfx Abbet - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Redpfx Abjxaafqjbot Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: used, Straightening and welding plate made of steel casting / gray cast iron, heavily ribbed former marking and measuring plate heavy-duty straightening plate length 1000 mm Redjdzqr Ajpfx Abbjt width 1000 mm thickness 230 mm working height 970 mm plate thickness 38 mm throughout - metal base frame weight 450 kg

Condition: used, Straightening and welding plate, steel cast iron / grey cast iron, heavily ribbed former marking-out and measuring plate heavy-duty straightening plate length 1000 mm width 800 mm thickness 250 mm working height 820 mm plate thickness 30 mm throughout Redpfx Abedzqrpebst – height-adjustable metal base weight approx. 400 kg surface slightly rusted

Condition: used, Steel cast iron straightening and welding plate, heavily ribbed Heavy-duty straightening plate Length 2000 mm Width 1600 mm Redjdzqrbepfx Abbot Thickness 110 mm Working height 600 mm Plate thickness 30 mm throughout Weight approx. 1000 kg Good condition, good surface

Condition: used, Alignment and welding plate, cast steel - grey cast iron, heavily ribbed Heavy-duty alignment plate Rsdjflt Ecjpfx Abbjt Length: 3050 mm Width: 2000 mm Thickness: 300 mm Plate thickness: approx. 55 mm throughout Weight: approx. 4.5 tons Good condition

Condition: used, Straightening and welding plate cast steel gray cast iron heavily ribbed Length 2000 mm Width 1200 mm Thickness 150 mm Working height 800 mm Panel thickness 35 mm - Substructure made of solid wood Rjdpfxodzqq Us Abbjt Weight approx. 950 kg Good surface

Condition: used, Welding turntable – Welding positioner with enclosure Circular welding device Load capacity approx. 50 kg Rodpfedzp U Ijx Abbjt Chuck diameter 300 mm Chuck rotational speed 1.0–15 rpm Power supply 230 Volts, 50 Hz - Spiral scroll chuck with internally stepped jaws - Infinitely variable speed adjustment via potentiometer - Drive via geared motor, rotation direction left - Start via electrical switch - Welding current transmission via slip ring contact - Extraction connection Ø 160 mm - Internal lighting Door opening W x H 715 x 1060 mm Internal dimensions W x D x H 780 x 780 x 1100 mm Required space W x D x H 900 x 900 x 2300 mm Weight 190 kg

Condition: used, Steel cast and grey cast iron straightening and welding plate, heavily ribbed Heavy-duty straightening plate Length: 1600 mm Width: 1000 mm Thickness: 210 mm Plate thickness: approx. 32 mm throughout Table height / working height: 565 mm - Very stable steel table base (custom-made) - Plate with base movable by pallet truck Weight: 740 kg Good condition Rsdpsqvq Ucofx Abbst

Condition: used, Work table with "swallowtail" fixed cuttings Overall size:1100x1400x800 mm Redpehyxa Aefx Abbot Weight: 1880 kg

Condition: good (used), functionality: fully functional, load capacity: 500 kg, Welding turntable, L-manipulator, positioner, in excellent condition, includes additional clamping plate. Rotating and tilting (overhead), steplessly adjustable speed. Mechanical height adjustment from 800 mm to 1100 mm. Outreach 1000 mm. Overall height 1800 mm. Length 3000 mm. Width 1100 mm. Clamping plate diameter 1000 mm. Redoylkn Iopfx Abbjt

Condition: excellent (used), functionality: fully functional, load capacity: 4,000 kg, Severt manual column lift and rotation device, including matching perforated table 1500 x 1500 x 200 mm for bolting, included. Optionally available with tooling for perforated table accessory set. Excellent condition (see video). Hydraulically height adjustable, minimum 800 mm, maximum 2400 mm. Load capacity 4000 kg. Perforated table 1500 x 1500 x 200 mm, type 28 mm. Rsdpfx Absyli Uyjbet

Condition: like new (used), functionality: fully functional, load capacity: 1,500 kg, Equipment: foot remote control, Römheld welding positioner with 1500 kg load capacity and very large clamping plate, in excellent condition. Equipped with foot remote control. Infinitely variable speed control. Plate: 1500 x 1500 mm. Height at vertical plate to center: 760 mm. Height at horizontal plate: 960 mm. Length: 1300 mm. Rjdpoyli Elefx Abbjt Width: 1100 mm.

Condition: good (used), functionality: fully functional, load capacity: 500 kg, Equipment: foot remote control, Welding turntable KT 500, speed adjustable via potentiometer or foot pedal. Table diameter: 600 mm. Height to center with vertical disc: 580 mm (-50 mm). Length: 1.0 m. Width: 0.6 m. Infinitely variable electric tilt range approx. 0–130°. Stepless speed adjustment. Includes hand remote control and foot pedal. Optional: Quick-action chuck, 400 mm diameter, €550. Rjdpjylimcjfx Abbet

Condition: excellent (used), functionality: fully functional, load capacity: 1,000 kg, 3-axis welding positioner with hydraulic height adjustment, load capacity 1000 kg, remote control. Clamping plate diameter 900 mm, excellent condition. Speed, height, and tilt infinitely adjustable. Height with vertical plate min. 635 mm, with horizontal plate min. 800 mm, height with vertical plate max. 1360 mm, with horizontal plate max. 1500 mm. Rsdpfxoylihyo Abbst

Condition: new, Year of construction: 2026, load capacity: 1,000 kg, Column Lift Rotating Device, 1 Tonne Load Capacity Protec Turning Device / Positioner Syncrolift Double column, remote control – wireless and manual Redpfxeyk Tb Io Abbjt Adjustable columns, mobile Load capacity: 1000 kg Minimum working height: 600 mm Maximum working height: 1500 mm Rotation speed: 1 rpm Clamping plate diameter: 500 mm Rotation drive: 0.37 kW Versions with load capacities from 2 to 10 tonnes available upon request

Condition: good (used), – Capacity: unknown – Infinitely variable speed – Height adjustable Rjdpfx Abew Ttxlebet – Tiltable – With three-jaw chuck – Foot pedal – 230V

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, pivoting range: 135 °, Equipment: foot remote control, 3-axis welding positioner Protec KT 10 000 HV Complete set incl. hand and dual foot remote controls Digital speed display Hydraulic height adjustment Tilting range 0 to 130° Dimensions: Min. tilted height: 1050 mm Max. tilted height: 2200 mm Min. horizontal height: 1360 mm Rodpfjxt Tgnjx Abbjt Clamping plate diameter: 2000 mm Length: 3250 mm, width: 1700 mm Speed from 0.05 to approx. 0.6 rpm (range from 0.05 to 1.2 rpm possible)

Condition: like new (used), functionality: fully functional, load capacity: 1,500 kg, 3D perforated welding table 2000 x 1000 x 200 mm, 100 mm grid, tabletop thickness 20 mm, bore diameter 28 mm. The tabletop is precision machined and extremely robust, weight approx. 750 kg. The Siegmund M Positioner is ideal for welding, assembly and maintenance work. Positioning is accomplished via a manually operated handwheel. Positioner with load capacity up to 1,500 kg. Torque: 900 Nm. Handwheel with handle Ø 315 mm. U-bracket compatibility: System 28. Maximum length of U-bracket: 3,000 mm. A - Working height: 850 mm, B - Column height: 955 mm, C - Overall height: 1,140 mm, D - Base plate width: 600 mm, E - Base plate length: 600 mm. Price includes the table top with legs, but excludes 3D clamping accessories. Rjdpfx Abex Thwqebot

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 10,000 kg, Column lifting and rotating device with 10-ton or 15-ton load capacity, available as a set or individually. Both sides powered. The machine is offered as a synchronized set or individually. Protec turning device/positioner Syncrolift. Dual column, wireless and manual handheld remote control. Column adjustment electrically movable on both sides. Load capacity: 10,000 kg, 360° rotation. Minimum working height: 800 mm. Maximum working height: 1,700 mm. Rotation speed: 0.5 rpm. Clamping plate diameter: 900 mm. Rotational movement: 2 x 2.2 kW. Torque: 18,950 Nm. The machine is also available individually as a mono model (at a lower price). Available with articulated flange (cardan flange) on request. Rodpfxsx Tig Hs Abbet

Condition: new, Year of construction: 2025, load capacity: 1,500 kg, Perforated Table 1200 x 2400 x 200 mm Tabletop thickness: 20 mm, hole diameter: 28 mm Swivel range: 360° Height adjustment: Hydraulic motor, 800 to 1200 mm Rotation speed: 0.5 rpm Motor power: 0.75 kW We offer tables in various sizes and load capacities: Fodpz Aer Uft Deq A Tepb Load capacity 500 kg, dimensions 1000 mm x 1500 mm x 200 mm, borehole 28 mm, with manual or automatic height adjustment Load capacity 1000 kg, dimensions 1000 mm x 2000 mm x 200 mm, borehole 28 mm, with manual or automatic height adjustment Load capacity 1500 kg, dimensions 1200 mm x 2400 mm x 200 mm, borehole 28 mm, with manual or automatic height adjustment Load capacity 2000 kg, dimensions 1200 mm x 2400 mm x 200 mm, borehole 28 mm, with manual or automatic height adjustment Load capacity 3000 kg, dimensions 1200 mm x 2400 mm x 200 mm, borehole 28 mm, with manual or automatic height adjustment Load capacity 5000 kg, dimensions 1500 mm x 3000 mm x 200 mm, borehole 28 mm, with manual or automatic height adjustment Rodpfsx Th Sbox Abbet

Condition: new, Year of construction: 2025, load capacity: 15,000 kg, Column-type turning device with 15-ton load capacity, available as a set or individually. 2 sides are driven. Machine is offered as a synchronized set or individually. Protec turning device / positioner Syncrolift. Double-column design, wireless and manual hand remote control. Column adjustment: both columns electrically movable. Load capacity: 15,000 kg, 360° rotation. Torque: 21,000 Nm. Minimum working height: 800 mm. Rjdpfx Absw Nilajbot Maximum working height: 1,700 mm. Rotation speed: 0.5 rpm. Clamping plate diameter: 1,000 mm. Rotational drive: 2 x 2.2 kW motors. The price refers to one unit with electric trolley included. The second unit as part of a set is 20% cheaper. Optional with articulated flange (cardan flange) upon request.

Condition: new, functionality: fully functional, load capacity: 10,000 kg, pivoting range: 360 °, Column lift turning device, 10-ton load capacity, available as a set or individually 2 sides driven Machine offered as synchronized set or individually Protec turning device / positioner Syncrolift Double column, handheld remote control wireless and manual Rodpfx Ajxq S Rgsbbjt Column adjustment 2x electrically movable Load capacity 10,000 kg, 360° Minimum working height: 800 mm Maximum working height: 1,700 mm Speed 0.5 rpm Clamping plate diameter 900 mm Rotary drive 2 x 2.2 kW Torque 18,950 Nm The machine is also offered individually as mono model (more affordable) Available on request with articulated flange (cardan flange)