Used Caterpillar 242B-3 High Flow for sale (22)

Condition: ready for operation (used), Year of construction: 2014, operating hours: 12,320 h, Main Drive Number of axis 3 Additional Equipment Includes software: FlowCUT, FlowPATH Kolhccqjwc Evversdk This 3-axis Flow Mach 3-3020b was manufactured in 2014 and is a robust waterjet cutting machine. It features a max. cutting speed of 7.6 m/min and a travel speed of 12.7 m/min. The cutting surface is sizable at 3 x 2 m, and it includes a 4150 bar Hyplex Hybrid pump with Dynamic Waterjet and Paser cutting systems. Software FlowCUT and FlowPATH are included. If you are looking to get high-quality cutting capabilities consider the Flow Mach 3-3020b machine we have for sale. Contact us for more information. Application Types Cutting

Condition: good (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: 1299-5903, total height: 1,470 mm, total length: 2,150 mm, total width: 1,100 mm, One of the best and most reliable high-pressure pumps: Flow 20XW double 20XW 7.6 l/min. Year of manufacture 12/99 7.6 l/min flow rate, 2 pressure intensifiers, (Info: Unit price of pressure intensifier approx. €14,000 in March 2025) 76 kW motor, with external oil-air cooler. The 20XW is running; the pump has only been used as a backup in recent years. It is now being sold because we need the space and have another 20XW as a backup. The pump is disconnected and could be loaded directly. Loading, transport, and commissioning/training can be arranged. The new price of a 20XW of the same model is currently €115,000.00 as of March 2025. You are welcome to view the pump or see the other 20XW in operation. Kslhccovf Ewgjqredk

Condition: not inspected (used), Year of construction: 1994, operating hours: 41,564 h, Functionality: unexamined, (Pictures are condition) Optional purchase: Current condition = 12.500 € Liability excluded - spare parts, service and maintenance can be offered Overhauled condition = 13.500 € Check of the Intensifier 3 months warranty (not on spare and wear parts) Renewed condition = € 17,999 (refurbish) 12 months warranty (not on spare and wear parts) New pressure intensifier, new control unit, new HP pump, hydraulics cleaned and checked. Kolhjguqucjccqrsdk we offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: ready for operation (used), Year of construction: 2020, General Data Measurements width 2000 mm Measurements depth 4000 mm Measurements height 610 mm Control Unit Brand Flow Model FlowCUT Movement X-Axis Movement 4000 mm Y-Axis Movement 2000 mm Additional Equipment HyperJet Pressure 6500 Bar Pump & Cooler Dynamic Waterjet XD 5 Axis Head with Height Sensor FlowXpert Programming Software Paser CF900 Abrasive Delivery System Ecoflow Abrasive Extraction System Sick Light Guards This Flow Mach 500-4020 Waterjet Cutting Machine was manufactured in 2020. It features a HyperJet Pressure 6500 Bar Pump & Cooler, Dynamic Waterjet XD 5 Axis Head with Height Sensor, and a Paser CF900 Abrasive Delivery System. With a bed size of 4000 x 2000mm and a maximum Z-axis travel of 610mm, the Flow Mach 500-4020 machine we have for sale is in excellent condition. Contact us for more information. Kelhccqov Utq Tsrjdk Application Types Water Cutting

Condition: excellent (used), Year of construction: 2020, operating hours: 2,849 h, Functionality: fully functional, machine/vehicle number: M542OCZX01, working range: 4,000 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 610 mm, type of input current: three-phase, input voltage: 400 V, table length: 4,000 mm, table width: 2,000 mm, pressure: 6.5 bar, rapid traverse X-axis: 71 m/min, rapid traverse Y-axis: 71 m/min, operating pressure: 6,500 bar, travel speed (max.): 71,800 mm/min, Equipment: safety light barrier, Flow Mach 500-4020 Waterjet Machine Type: Waterjet Cutting Machine with 5 Axis Head Model No.: M500 4020 XD Year: 2020 Hours: 2849hrs Condition: Excellent Includes HyperJet Pressure 6500 Bar Pump & Cooler Dynamic Waterjet XD 5 Axis Head with Height Sensor FlowXpert Programming Software Paser CF900 Abrasive Delivery System Ecoflow Abrasive Extraction System Sick Light Guards Technical Specifications Kjlhccot Stfueqrjdk Bed Size: 4000 x 2000mm Linear Positional Accuracy(from new): +/- 0.025mm Rapid Traverse: 17.8m/min Acceleration: 0.1g Repeatability: +/-0.020mm Ballbar Circularity(from new): +/- 0.0635mm Max Z Axis Travel: 610mm Software: FlowCUT

Condition: good (used), Year of construction: 2011, Fuji Flow Wrapper High speed horizontal form- fill - seal machine Type: FW3410/B Year of construction: 2011 Zodiac HC terminal printer Kelhccev T D D Ujqredk 200 V, 3 Ph, 50/60 Hz, 30 A Belt width: 250 mm, seal length: 300 mm Dimensions: 3360 mm x 1200 mm x 1900 mm.

Condition: as good as new (ex-display), Year of construction: 2023, Short & sweet Base axis (X) : 1.3-2 mm Cantilever (Y) : 1.3-4 mm Accuracy : 0.06 mm Technical data Linear axis accuracy : ± 0.1 mm/m Maximum travel speed : 10 m/min Acceleration : 0.02 g Repeat accuracy : ± 0.06 mm Circularity : ± 0.1 mm Kslhehw Nfqjccqrodk Z-axis stroke : 180 mm Base axis (X) : 1.3 m, 3 m, 4 m Extension arm (Y) : 1.3 m, 2 m Equipment and accessories Maintenance packages UltraPierce tapping aid1 Splash guard1 FlowTexturing (FTT) Abrasive de-sludging system ecoFlow FlowNest* FlowXpert* Laser pointer Clamping and tensioning system Clean water conversion kit * Required for FlowTexturing

Condition: excellent (used), Year of construction: 2018, operating hours: 11,066 h, Functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, type of input current: AC, input voltage: 400 V, table length: 4,100 mm, table width: 2,100 mm, pressure: 4,150 bar, rapid traverse X-axis: 17 m/min, rapid traverse Y-axis: 17 m/min, table height: 900 mm, power: 37 kW (50.31 HP), Equipment: safety light barrier, Flow Mach 500 4020 - Material Support Area • X-axis ca. 4.100 mm • Y-axis ca.2.100 mm - Net Cutting Area (2 D) • X-axis ca. 4.000 mm • Y-axis ca. 2.000 mm -Precisions Z-axis, programmable, servo-driven, Z-axis travel 305 mm -Cutting head PASER 4 Dynamic Waterjet Technology • Produces 2D parts with tight tolerances at high speeds • 5-axis kinematic system Kelhovvmi Ejccqredk -Pump Intensifire UltraJet 60i-S • 4.150 bar, 37 kW (50 PS), 3,8 l/min • Closed loop cooler • Pump tool kit -Software FlowMaster -Material Support System + Catcher tank • Stainless steel construction • Waterlevel control module • Prepared for use with an abrasive removal system • Stainless steel slats as workpiece support - Abrasiv Delivery System PASER CF 900 • Garnet capacity 425 kg - Flow UltraPierce Material Piercing Assist (for composites, glass, stone) -Machine under power, is working -actualy price of new machine with same configuration: 304.000 € -It could be sold the complete still working waterjet job shop company in Poland (real estate, machine park with 3 Flow waterjet cutting systems, base of ca. 160 regular customers, complete company equipment)

Condition: new, Year of construction: 2025, Functionality: fully functional, The EchoJet is the first of its kind, fully enclosed waterjet solution designed to improve operator efficiency while protecting the surrounding environment from water and abrasive. This enclosed, compact design mirrors the traditional machine tool look and feel, with the flexibility to cut virtually any material, and shape. The system touts a unique gantry design that optimizes the work envelope. Kdolhov Szxmoccqrek Highlights include:  Fully integrated enclosure offers quite, clean operation  Unique gantry design offers excellent worktable accessibility while providing fast and precise motion  Leading industry drives, motors, and electrical system coupled with Flow’s ultrahigh-pressure technology  Built-in interior enclosure lights enhance visibility and safety  All machine components controlled by convenient roll-around operating console that easily spans the entire work envelope  Industrial PC provides fast and powerful operation in environments up to 55°C with full IP66 spray protection  Laser calibrated at factory and dynamically ball bar tested at customer facility to ensure accuracy standards are validated  One-piece construction and compact size provides ultimate floor space savings, quick installation to get you running quickly, and can easily be moved around later.

Year of construction: 1988, Condition: ready for operation (used), A powder tower system, a chimney and a burner for the food industry or the milk processing industry, in particular for the production and drying of milk powder or similar products, are available. 1) Tall form dryer SPX Flow APV, type II K, year of construction: 1988, water evaporation capacity: 1000kg/h, products: MPC 80/MPC 85/WPC 60/MCN 85. Components of the powder tower system: drying tower, two collecting cyclones with rotary conveyors, feed cyclone, buffer tanks, lift inlet preheater, homogenizer, vibration filter, control cabinet with frame construction and two atomizer and nozzle systems. 2) Steel chimney Fűtőker, year of construction: 2022, diameter 1/2: 800mm/600mm, height: 20500mm. 3) Weishaupt WM-G20/3-A burner, year of construction: 2014, documentation available. On-site inspection is possible. Kelhccovmq Tijqredk

Condition: new, Year of construction: 2021, machine/vehicle number: Sanitary napkin , surgical mask, paper napkin, nap, Automatic Sanitary napkin , surgical mask, paper napkin, napkin, paper, Sanitary Napkin, Mask, Towel, Wet Wipes , wet towel packing line Sanitary Napkin Packing Machine wet wipes, dry wipes, food pad packing, wound pad packing, dry wipe packing Main Features ☆ Fully servo driven,Servo motor management by electronic ☆ Modular structure design，Small floor area ☆ Force restrict protection, stable running ☆ Suitable for different direction packing Main component configuration ★ Motion control system：MITSUBISHI/SIEMENS ★ pneumatic：SMC ★ Guide rail, screw rod ： TBI 、TMI ★ Electrical accessories：Schneider Parameter Working speed UP to 600 pieces/min and 60 bags/min Number of pieces per row 10-20pieces/row General dimensions (LxWxH) 6295x1000x2277mm Weight 3522KG Electrical Power consumption 23KVA Kjlhoh T Dd Heccqrsdk Air Supply 0.65-0.85Mpa Sanitary napkin , surgical mask, paper napkin, napkin, paper, Sanitary Napkin, Mask, Towel, Wet Wipes , wet towel packing line Our Toilet Paper Bundle Packing Machine, Full Automatic Baby Wet Wipe Line, Napkin Tissue Paper Making Machine have high stability and low failure rate, which provides a favorable guarantee for improving production efficiency. The trust of the majority of users is our unremitting pursuit, and the support of users is our success. We constantly grasp the pulse of market development and provide our customers with more satisfactory products and services. With years of focus and accumulation in the water treatment industry, our company already has a large number of experienced personnel, and constantly updates products and improves the quality. Our company will create value for customers through stable and reliable quality and high-quality service. In order to foster a good environment for the development of our company, we implement entrepreneurial principles in business development, including adopting flexible working hours and relaxing the dress code.

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Material: 1.4408 stainless steel -without: drive -Connection: DN50 -Width: 152 mm -Nominal pressure: PN40 -Number: 1x valves available Kjlhccjdki Rteqredk -Price: per piece -Weight: 9.69 kg/piece

Year of construction: 2011, Condition: good (used), The BD Accuri® C6 is a digital basic flow cytometer, which is equipped with a Blue (488nm) and a Red (640nm) lasers, two light scatter detectors (FSC and SSC), and four fluorescence detectors. The default configuration of the BD Accuri® C6 is similar to the FACSCalibur-2 (3-Blue 1-Red) with filters optimized for the detection of fluorochromes such as FITC, PE, PerCP, and APC. The Selectable Lasers Module allows operation of the system in two additional configurations (2-Blue 2-Red, and 4-Blue) and significantly expands the fluorochrome combinations that can be analyzed. BD Accuri® C6 is manufactured with standardized fluorescence performance so that users do not need to adjust detector voltages. Data is digitally collected over a 7-decade dynamic range (16 million channels of digital data), making all data available to users as needed. A unique low-pressure pumping system drives the fluidics. A sheath-focused core enables event rates of up to 10,000 events per second and a sample concentration of over 5 x 106 cells per mL. In addition, the system derives sample volume and can calculate absolute counts or sample concentration per microliter. The non-pressurized system of BD Accuri C6 supports any brand of sample tubes – 12 x 75 mm or smaller (including microcentrifuge tubes), made of polypropylene or polystyrene. BD Accuri® C6 CFlow SAMPLER supports the high throughput and fully automated acquisition from 48- and 96-well plates and deep-well plates. It is also supplied with a 24-tube rack for the walk-away acquisition of standard 12 x 75-mm tubes. Kelhccqeix Ntysrjdk Software version 1.026421

Condition: excellent (used), Year of construction: 2018, operating hours: 8,869 h, Functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, type of input current: AC, input voltage: 400 V, table length: 4,100 mm, table width: 2,100 mm, pressure: 6,500 bar, rapid traverse X-axis: 17 m/min, rapid traverse Y-axis: 17 m/min, table height: 900 mm, power: 73.55 kW (100.00 HP), Equipment: safety light barrier, Flow Mach 500 4020 - Material Support Area • X-axis ca. 4.100 mm • Y-axis ca.2.100 mm Kdslhovvl Ugeccqrek - Net Cutting Area (2 D) • X-axis ca. 4.000 mm • Y-axis ca. 2.000 mm -Precisions Z-axis, programmable, servo-driven, Z-axis travel 305 mm -Cutting head PASER 4 Dynamic Waterjet XD Technology • Beveling and 3D cuts up to 55˚ without taper • Produces 2D and 3D parts with tight tolerances at high speed • 5-axis kinematic system -Pump Intensifire HyperJet 94i-D • 6.500 bar, 75 kW (100 PS), 4,92 l/min • Closed loop cooler • Pump tool kit -Software FlowMaster + FlowExpert -Material Support System + Catcher tank • Stainless steel construction • Waterlevel control module • Prepared for use with an abrasive removal system • Stainless steel slats as workpiece support - Abrasiv Delivery System PASER CF 900 • Garnet capacity 425 kg - Flow UltraPierce Material Piercing Assist (for composites, glass, stone) -Machine under power, is working -actualy price of new machine with same configuration: 370.000 € -It could be sold the complete still working waterjet job shop company in Poland (real estate, machine park with 3 Flow waterjet cutting systems, base of ca. 160 regular customers, complete company equipment)

Condition: new, Year of construction: 2023, Functionality: fully functional, The Mach 100 waterjet cutting system is a reliable and versatile cutting solution that allows you to expand your production with minimal investment. Equipped with the same core Flow components as our premium waterjet cutting systems, the Mach 100 offers you the versatility and added value you need to start your production, backed by comprehensive service and support. Whether you're looking to expand your capacity in series production or prototyping, or enter the waterjet business, the Mach 100 is the key to success. Kdjlhccov Szq Aeqrok

Year of construction: 2010, Condition: ready for operation (used), A complete CNC composite machining center (CMC) for the plastics industry is available. Axes: 13, number of spindles: 1, channel 1: X(U)/Y1/Z1/C1/B1/A1, channel 2: X(U)/Y2/Z2/C2/B2/W21, channel 3: X(U)/W21. Spindle type: S2, temperature sensors: built-in, travel X/Y1/Z1: 15000mm/4550mm/1500mm, C1: +/-270°, B1: +/-180°, rotary axis turning capacity: 45°/s, rapid traverse X/Y/Z: 10m/min, feed X/U: 25m/min, feed Y/Z: 15m/min, feed (manual): 5m/min, control: Siemens 840D. Including 7x flow water jet pumps, Ebbco metalworking filter system and flow abrasive management system. Documentation available. On-site inspection is possible. The entire system is intended as a spare parts carrier. Kdolhccsvm At Isqrek

Condition: used, Year of construction: 2011, operating hours: 6,895 h, Functionality: fully functional, We are selling our Flow waterjet cutting system Kslhcouquxmocqrodk Cutting area: 4x2m Pump: 6000bar 2 cutting heads (1 disconnected) lots of accessories (value approx. 20.000€) 2 cutting heads etc. This was put into operation by Flow in March. The major pump maintenance was carried out at the end of March (just under €40,000) and it has run for approx. 300 hours since then. Flow came back in August and replaced various seals and valves on the pump. All operation reports are available. Control system for automatic sand supply new New air conditioning units in control cabinet incl. software Please contact us for further information. Sold due to new acquisition. Crane + forklift available for loading.

Condition: ready for operation (used), Year of construction: 2000, working range: 4,000 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 250 mm, power: 75 kW (101.97 HP), Flow T11 built in 2000 Two-head system, additional cutting heads possible: - Processing area 4000 x 4000 x 250mm - CNC Siemens control Sinumerik 840D Digital - All Siemens drives - Machine currently works with 2 cutting heads. - Holders on both axes for holding additional cutting heads - Without high-pressure pump, model 20XWD (415Mpa, 75KW) (Pump can be purchased separately) Kdslhcevfcp Tecqrjk - Paser 3 abrasive cutting heads - Height sensor and collision monitoring (not installed) - Software package, network connection of the CNC control, - Basin, stainless steel paneling - Automatic lubrication system The system is running and is used almost every day. -Price of the system does not include the FLOW 20XW If the purchase is made in 2024, the system can be stored with us free of charge until it is picked up. Dismantling, delivery and assembly, as well as training on the system and programming can be arranged. Info: Another complete Flow T11 system, also with two Paser 3 cutting heads, with the same Siemens 840D control system, working area 4000x2000mm, can also be purchased for spare parts. The system ran faultlessly until the end and has already been dismantled. (Cutting basin already sold)

Condition: used, Functionality: fully functional, Good working condition. Please check out our other listings as well. Kdjlhsupx E Ueccqrek

Condition: excellent (used), Year of construction: 2021, operating hours: 144 h, Functionality: fully functional, working range: 20,003,000 mm, I sell a waterjet / waterjet cutting machine from Flow. Mach 100 model The machine has 144 working hours The machine has been inspected and appraised by FLOW's appraiser Cutting area 3x2 meters. The machine is in very good working condition - used occasionally for in-house production, has only hours worked. Processed less than 2 tons of garnet. Currently the machine is running and fully ready to work, there is a possibility of full testing before purchase. Included in the price of the machine is a website with corporate identity and logo, offering cutting services with the machine . I have many spare parts for the machine: - mixing tubes. - diamond orifices - mixing bodies - major service kit for the pump (major kit) - head covers The device has an attachment for piercing brittle materials such as glass, ceramics. Working area : Z-axis feed: 178mm Net cutting area X axis min. 3,000mm Y axis min. 2,000 mm Machine accuracy: Per linear axis at 20 °C +/- 3 °C - Linear X and Y axis positioning accuracy: +/- 0.10 mm/m - Repeatability of X and Y axis: +/-0.06 mm ( complete working area) Circularity test: : +/- 0.013mm Machine speed - Technological speed up to 10m/min - Maximum shape speed: up to 5m/min - Acceleration 0,05 g Light gate The light gate prevents you from entering the front, rear and side of the machine in cutting mode. - FlowMaster PC control - Simple and logical user interface - User-friendly menu structure , based on pictograms - Exclusive modifiable cutting path creation with automatic generation of inputs, outputs and routing. - exclusive SmartStream technology - Every beginner becomes a professional - Provides quality parts - Dynamic language switching: operators can work with the software interface in the language of their choice without having to restart the program - Context-sensitive tool tips and integrated Help function - Simple and quick definition of edge surface quality - Feed potentiometer from 0 to 125% - Automatic calculation of working times - PASER 4 cutting head - Abrasive dosing system Paser 4 - Abrasive storage and transport system Paser CF900 - Flow HyPlex prime 30 ultra high pressure pump - Flow UltraPierce easy piercing system - Technical specifications: - Adapted to 4150 bar - Continuous working pressure of 3800 bar - Engine power 22 kW (30 hp) - Maximum water flow rate 3.1l/min - Maximum inlet temperature 21°C Kdelsurv Nvjhccqrek - Air pressure 6.2 -8.3 bar - Mains voltage 400V, 50 Hz , 3 phases - Dimensions (W X D X H): approx. 1,524 x 914 x 1,033mm - Weight: approx. 850 kg - HyPlex Prime pump cover - HyPlex Prime hydraulic pump tool kit - HyPlex Prime tool kit - Altitude piping package In addition, the device can be purchased - Compressor from Polish manufacturer Airpol modek k5, power 5.5kW - Pneumatic jack from DSsystem company with 10 suction nozzles and a system of unsticking sheet metal lifting capacity of 1 tonne -Wiessmann water treatment plant

Condition: as good as new (ex-display), Year of construction: 2024, Functionality: fully functional, repeat accuracy: 0.02 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.07 mm, type of input current: three-phase, input voltage: 380 V, table length: 3,000 mm, table width: 2,000 mm, warranty duration: 12 months, travel speed (max.): 10,000 mm/min, Equipment: safety light barrier, The Mach 150 waterjet system is a powerful and cost-effective system for precise 2D cutting applications. Equipped with advanced waterjet technology and robust components, this ready-to-use waterjet solution offers excellent performance. The machine features high-quality motors, drives and software that are also used in Flow's top products. The Mach 150 is both cost-effective and reliable. With our excellent service and maintenance offer, you can rely on the sustainability and efficiency of the Mach 150. You are investing in Flow's reliability and many years of experience. Kslhccqovnfc Ijrodk The following features characterize the system: ◼ Inclined bridge for full access to the work area and user-friendliness ◼ Proven machine controls with sensors and system health diagnostics ◼ Powerful PC for industrial use ◼ Various configurations for all industry requirements ◼ Powerful, industry-leading software ◼ A complete, ready-to-use system ensures that your production can start immediately.

Condition: used, Functionality: fully functional, Flow Cabinet/Safety Cabinet. Kdslhceupx E Iscqrjk Good working condition. Please check out our other listings as well.