Used Doosan Dx170W for sale (255)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: FANUC, controller model: Doosan-FANUC 21i-MB, table width: 430 mm, table length: 920 mm, spindle speed (max.): 20,000 rpm, spindle motor power: 15,000 W, number of spindles: 2, number of slots in tool magazine: 30, tool diameter: 40 mm, number of axes: 4, Equipment: documentation/manual, Tool Standard is CAT-40, 30 pieces of Tool-holders are attached to this machine 4th axis: rotary table included; Renishaw probe ready. through spindle coolant; spindle chiller; rigid tapping; rapid traverse 36,000 mm/min; manual pulse generator; Iodpfx Aex Ncpgsh Uotl air blast; coolant tank & pump; chip tray;

Condition: ready for operation (used), Year of construction: 2023, overall weight: 33 kg, load capacity: 10 kg, arm reach: 1,300 mm, number of axes: 6, This 6-axis DOOSAN M1013 was manufactured in 2023. It features a 10 kg payload capacity and a reach of 1,300 mm, making it suitable for various applications. The cobot comes equipped with a CLOOS QINEO Start T mobile welding unit, a Rhino welding table, and a complete welding fixture package. If you are looking to get high-quality welding capabilities, consider the DOOSAN M1013 collaborative robot we have for sale. Contact us for further details. • Repeatability: ±0.05 mm • Controls: DR control unit; Teach Pendant control panel • Software/Options: Cockpit control; welding application • Condition: Like-new, never used Additional equipment Isdpfx Ahjzwpvyo Uotl • CLOOS QINEO Start T mobile welding unit: • 350 A power source • 500 A water-cooled welding torch • QN WD R wire feeder (for wire diameters 0.8–1.6 mm) • Rhino welding table with accessories • Welding fixture package (one piece of each required wear and consumable part)

Condition: repair required (used), functionality: limited functionality, first registration: 01/2018, Year of construction: 2018, machine/vehicle number: DW6CWLBRAG1010165, We are offering this Doosan machine, model DL200, a wheel loader, manufactured in 2018. The machine has an electronic fault: it starts, but due to the electronic error, it cannot move. Manufacturer: Doosan Model: DL200 Year of manufacture: 2018 Isdpfxoy S S Eps Ah Uetl If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: used, Year of construction: 2012, New mill spindle 2026 Turning diameter: 760 mm Turning length: 1540 mm Control: FANUC Chuck diameter: 254 mm Bar capacity: 76 mm Spindle bore: 86 mm Swing over bed: 1000 mm X-axis travel: 630 x 220 mm Z-axis travel: 1585 x 1515 mm Y-axis travel: 230 mm Spindle speed: 4,000 rpm Spindle nose: A2-8 Milling spindle speed range: 12,000 rpm Tool changer: 40 positions Turret: 12 stations Tool holder: BMT 65 P, Capto Drive power: 26/22 kW Total power requirement: 100 kVA Machine weight: approx. 15.5 t Space required: approx. 6.1 x 2.7 x 3.0 m Options: High pressure coolant 60 bar Auto door & Safety Edge Isdpszg N Diefx Ah Uetl Auto tool setter Coolant blast for chuck jaw cleaning Coolant gun Dual chuck pressure LNS Bar feed interface Prep. for special steady rest lower turret Thru-coolant for Main and Sub spindle Tool load monotoring function Profibus 3 color patrol lamp Renishaw RMP60 INCL. high speed SKIp Function

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 250 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 580 mm, overall weight: 4,850 kg, controller manufacturer: FANUC, number of axes: 5, This 5-axis DOOSAN PUMA 2000SY was manufactured in 2006. It features a sub-spindle and a Y-axis for enhanced machining capabilities. The machine includes a bar feeder and 10 motorized driven tool holders, providing versatility for various applications. With a total operating time of 8836 hours, this horizontal turning machine represents a valuable opportunity for high-quality turning capabilities. Reach out for further details regarding this machine. • Y-Axis: Included • CNC Total Operating Hours: 8836 hours (THP LAV) • Electrical Power Supply: AC 380/400V, 3-Phase, 50/60 Hz • Nominal Capacity: 50.71 kVA / 11.0 kW • Maximum/Full Load Current: 73.20 A • Interruption Current: 9000 A Additional equipment • TOP Automazioni bar feeder • Chip conveyor Isdpfxjzzn U Ao Ah Ujtl • Parts catcher / conveyor output belt • Hydraulic unit • USAG tool trolley • Driven tool holders: 10 motorized modules / driven tools Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, power: 124 kW (168.59 HP), Year of construction: 2011, operating hours: 11,380 h, Empty weight: 24.600 kg Please contact Emal Jaweed for more information Ijdpfxjzuaw Nj Ah Ujtl

Condition: excellent (used), Year of construction: 2001, Vertical CNC lathe Brand: DAEWOO (DOOSAN) Type: PUMA V550 Year: 2001 (10,000 cutting hours) CNC: FANUC 18i-T Specifications: Turning capabilities: Maximum turning diameter: 800 mm Maximum workpiece diameter: 730 mm Maximum turning height: 750 mm Horizontal travel: 390 mm Vertical travel: 780 mm 3-jaw hydraulic chuck: Diameter: 500 mm Rotation speed: 20 to 2000 rpm Iedpjzym Uxsfx Ah Uotl Main motor power: 50/37 kW Dimensions (width x depth x height) without conveyor: 1,950 x 2720 x 3070 mm Weight: 9 tons Equipped with: 8-tool turret Set of turning tool holders Set of jaws Chip conveyor

Condition: used, Year of construction: 2007, operating hours: 67,434 h, functionality: fully functional, machine/vehicle number: PT18SY0210, turning length: 300 mm, turning diameter: 230 mm, spindle motor power: 18,500 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 205 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, feed length Z-axis: 350 mm, feed rate Z-axis: 30 m/min, chuck outer diameter: 250 mm, bar diameter (max.): 65 mm, overall weight: 8,800 kg, We are offering a high-performance and reliable Doosan TT1800SY CNC turning center, ideal for demanding serial production as well as complex precision machining. Key Features: Dual spindle (main + sub spindle) Y-axis for off-center and complex machining Twin turret system (upper + lower turret) Live tooling capability Full spindle synchronization (simultaneous machining) High productivity with reduced cycle times Technical Specifications: Max. turning diameter: approx. 230 mm Max. turning length: approx. 300 mm Bar capacity: approx. 65 mm Spindle speed (main/sub): up to 5,000 rpm Spindle motor power: ~18.5 kW Y-axis travel: ±50 mm X/Z axis travels: approx. 205 mm / 350 mm Rapid traverse rates: up to 30 m/min Turrets: 2 × 12 stations Live tooling speed: up to 6,000 rpm Iedpfx Ahey D Rypo Uotl Tool holders: BMT55 Control system: FANUC 18iTB C-axis: both spindles

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 945 h, load capacity: 2,000 kg, fuel type: electric, fork length: 1,150 mm, drive type: Elektro, Low-lift pallet truck Load center: 600 Condition: Ready for use and fully functional Technical condition: very good Front tire type: Vulkollan Rear tire type: Vulkollan Battery voltage: 24V Battery Ah: 250Ah Battery manufacturer: HSR Battery type: PzS Battery year of manufacture: 2019 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is inspected by our workshop and according to FEM 4.004 standards. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing at favorable terms are available upon request. We would be happy to provide you with competent and detailed advice on our vehicles. Isdpfx Ahez Dl Szo Ustl

Condition: used, Year of construction: 2022, turning diameter 420 mm turning length 1350 mm spindle passage 101 mm control Siemens SL 828D ShopTurn number of controlled axis 4 turning speed range 3000 U/min power requirement 22/18,5 kW rapid speed 30 m/min number of tapers in turret head 12/24 BMT 65 number of driven tools in turret 12 BMT 65 Spindel speed of driven tools 5000 U/min Spindelpower on driven tool 7,5/5,5 kW y-axis +/- 65 mm tail stock MT-5 weight 8,0 t dimensions 5,7 x 2,3 x 2,32 m Heavy CNC- lathe with driven tools and Y- Axis in very good condition. First instalation: 03/2023 Appr. 5400 h Power on. - 2x 3-jaw chuck Ø 325 + 400 mm - some fixed tool holders - Tool pre- setter - chip conveyor - 4x driven tool holders - 2 + 2 driven toolholders with Capto C4 - oildust collector - band filter system with appr. 1000 ltr. - hydr. steady moveable wit turret SMW Autoblock SLU-X3.1 (Ø 20- 165 mm) Itedpfx Aszfqf Seh Uel - 3 colour signal lamp - coolant gun - some jaws - external programming system MCS40501/2 - build in spindle

Condition: ready for operation (used), Year of construction: 2017, operating hours: 6,117 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 1050 mm Y-AXIS TRAVEL: 570 mm Z-AXIS TRAVEL: 510 mm DISTANCE SPINDLE NOSE-TABLE: 150-660 mm RAPID FEEDS X-Y-Z: 36 - 36 - 30 m/min SPINDLE: 15000 rpm; 10 - 17 kW; ISO 40 - DIN TABLE SIZE: 1300 x 570 mm MAX ADMITTED LOAD: 1000 Kg TOOL MAGAZINE: CHAIN-TYPE ; 30 POS MAX TOOL DIAMETER: 80 (125) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: HEIDENHAIN TNC 620 WEIGHT: 6500 Kg OVERALL DIMENSIONS: 3110 x 2413 x 2985 mm ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; ETHERNET PORT ; USB PORT ; TOOL SETTER ; Isdpfjzhc Ansx Ah Ujtl TOUCH PROBE ; PORTABLE HANDWHEEL

Condition: ready for operation (used), Year of construction: 2019, operating hours: 14,553 h, travel distance X-axis: 205 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, number of axes: 4, This 4-axis DOOSAN LYNX 2100 LSY was manufactured in 2019. It features a Y-axis for multi-tasking operations, a 12-station turret with live tooling, and a hydraulic 3-jaw chuck. The machine is equipped with a bar feeder system, allowing for efficient serial production. If you are looking to get high-quality turning and milling capabilities, consider the DOOSAN LYNX 2100 LSY turn-mill centre we have for sale. Contact us for further details. • Main features: • Main spindle + sub-spindle • Y-axis for multi-tasking operations • 12-station turret (24 indexing positions) • Live tooling (driven tools) • Tool interface: BMT45 Ijdpfxjy Epi Aj Ah Uotl • Workholding/Capacity (on machine): • Hydraulic 3-jaw chuck: 170 mm • Key advantages: • Y-axis + sub-spindle → full machining capability • Live tooling → turning and milling in one setup • Bar feeder → ideal for serial production • Automated part handling → increased productivity Additional equipment • Bar feeder: Top Automazioni Fusion 350 (Ø20–50 mm, up to 3200 mm length) • Additional 3-jaw chuck: 135 mm • Collet system, capacity 5–65 mm • Chip conveyor (belt type, side discharge) • Parts catcher for sub-spindle • Oil skimmer • High-pressure coolant system (5–7 bar, 20 µm filtration) • Automatic tool measurement • Spindle and axis load monitoring system • 3-color signal light • Parts handling arm (for sub-spindle unloading) • Tooling package: • 2x straight driven tool holders • 2x angular driven tool holders • 1x extended angular holder • 1x set of turning tool holders Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 2,160 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: FANUC 0i-MD, total height: 3,170 mm, total length: 5,500 mm, total width: 2,892 mm, table width: 760 mm, table length: 2,160 mm, table load: 1,800 kg, overall weight: 15,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 800 mm, spindle motor power: 18 W, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 40, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED vertical machining center “DOOSAN mod. DNM 750L-” with FANUC 0i-MD CNC Iedpfx Ahjw D Ayns Uetl

Condition: like new (used), Year of construction: 2018, operating hours: 3,621 h, functionality: fully functional, machine/vehicle number: ML272-000046, turning length: 1,074 mm, turning diameter: 550 mm, spindle bore: 102 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,080 mm, spindle motor power: 35,000 W, type of input current: three-phase, overall weight: 9,450 kg, mount diameter: 32 mm, The machine is in very good condition, maintains new parameters and accuracy. Can be tested. Itodpfx Aovri I Ash Ujl No warranty of any kind. Data subject to error. Sale reserved until deposit is received.

Condition: good (used), Year of construction: 2006, turning length: 305 mm, turning diameter: 320 mm, travel distance X-axis: 175 mm, travel distance Z-axis: 330 mm, rotational speed (max.): 5,000 rpm, quill diameter: 65 mm, quill stroke: 80 mm, bar passage: 51 mm, FANUC i Series control system Iedpfx Ajy S U Dhoh Uotl Turret with 12 stations (non-driven) Tailstock Chip conveyor Bar feeder IEMCA BOSS 545/32 E

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: ML0107-000373, Doosan PUMA 2600 L Isdpfxoxw Ilmj Ah Ustl Swing 780mm X-Axis 260 mm Z-Axis 1350 mm FANUC i Series Swarf conveyour Renishaw Toolsetter

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 12,776 h, load capacity: 2,500 kg, lifting height: 4,800 mm, fuel type: diesel, mast type: triplex, construction height: 2,170 mm, power: 34 kW (46.23 HP), drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Solid rubber Front tire condition: 60 - 80% Rear tire type: Solid rubber Rear tire condition: 40 - 60% Itodpfx Ahezz Uiao Uel Description: DOOSAN D25S diesel forklift - - - 2.5 ton lifting capacity - - - Year of manufacture 2012 - - - Side shifter - - - TRIPLEX free-lift mast - - - Overall height 2.17m - - - Lifting height 4.80m - - - 12714 operating hours according to meter - - - Forklift with 4-cylinder YANMAR diesel engine, 49 hp - - - Mechanical hydraulic levers - - - Solid rubber tires, front approximately 70%, rear approximately 50% - - - LED work lights, front and rear - - - Simple and mechanical forklift - - - Good condition - - - Front forklift can be viewed on site - - - New inspection certificate and new inspection carried out by a court-certified expert - - - Affordable delivery options!! Side shifter, 3rd valve, work light rear, work light front, heater, full cabin

Condition: good (used), Year of construction: 2013, Traverses XYZ: 762 x 435 x 510mm, Ijdpfx Aszhwg Ueh Uotl table size 920 x 435mm, ISO40 spindle taper, spindle speed 12000 rpm, FANUC i Control, spindle motor power 15kW, 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor

Condition: good (used), functionality: fully functional, power: 102 kW (138.68 HP), gearing type: automatic, fuel type: diesel, fuel tank capacity: 236 l, color: blue, overall weight: 18,200 kg, empty load weight: 16,500 kg, tire size: 10.00-20 dubbele banden, tire condition: 90 %, axle configuration: 4x4, number of seats: 1, emission class: euro4, Year of construction: 2018, operating hours: 2,430 h, Equipment: additional headlights, air conditioning, all wheel drive, cabin, hydraulics, onboard computer, === MAIN SPECIFICATIONS === Year: 2018 Operating hours: approx. 2,430 h Operating weight: approx. 16,500 kg Gross vehicle weight: 18,200 kg Max. digging depth: 5,455 mm Max. digging reach: 8,670 mm Engine manufacturer: Perkins Engine model: 1204F Engine power: 102.1 kW / 137 hp Drive: Diesel Type: Wheeled excavator Boom type: Two-piece boom Arm length: 2,500 mm Quick coupler: Yes Hydraulic functions: Auxiliary hydraulics / breaker piping Air conditioning: Yes Cabin: Closed ROPS cab Heated cabin: Yes Travel speed: 3.5 / 10 / 37 km/h Stabilizers: No Dozer blade: Yes Tyres: 10.00-20 double tyres Emission class: Stage IV / Tier 4 Final CE certification: Yes Country of manufacture: South Korea === HIGHLIGHTS === Well-equipped Doosan DX165W-5 wheeled excavator. Two-piece boom with 2,500 mm arm for versatile digging, lifting and grading work. Perkins 1204F Stage IV diesel engine with 102.1 kW power output. Closed ROPS cab with air conditioning, heated air suspension seat and 7” TFT LCD monitor. Equipped with dozer blade, quick coupler and auxiliary hydraulic lines. Powershift 2-speed transmission with creep mode. Compact reduced tail swing design, ideal for urban and confined job sites. Rear-view camera for improved visibility and safe operation. CE certified and ready for immediate operation. === CONDITION === Good working condition. Used machine with normal visual wear for age and hours. Fully checked, maintained and tested by certified professionals. Inspection possible on request. === LOCATION & PRICE === Located in Sittard, the Netherlands. Ijdjy T Eqbepfx Ah Ustl Worldwide delivery possible. Price: €79,000 (EXW / excl. VAT). The Doosan DX165W-5 is a compact and powerful wheeled excavator designed for construction, road works, utility work, urban job sites and general earthmoving applications. This 2018 machine is equipped with a Perkins 1204F Stage IV diesel engine, two-piece boom, 2,500 mm arm, dozer blade, quick coupler and auxiliary hydraulics. The closed ROPS cab offers excellent operator visibility, air conditioning, a heated air suspension seat, rear-view camera and a user-friendly 7” TFT LCD monitor. Thanks to its reduced tail swing, strong hydraulic performance and wheeled undercarriage, the DX165W-5 is a practical and reliable machine for working in confined spaces and on road construction projects. A clean and well-equipped wheeled excavator, CE certified and ready for work. === DELIVERY === Crane loading possible on request for smooth transport handling. Flexible shipping options tailored to your destination and logistics preferences. All transport is professionally handled by the logistics team of Collé Rental & Sales.

Condition: as good as new (ex-display), Year of construction: 2021, Brand new, unused machine!!! DOOSAN LYNX 2100G Year: 2021/10 Max. turning diameter: 170 mm Max. turning length: 330 mm Standard chuck size: 6" Max. spindle torque: 118 N·m Max. spindle speed: 6000 rpm Max. spindle power: 18.5 kW Itsdpfsy E Ixxsx Ah Uol Parts catcher Control system – FANUC touch Cromar chip conveyor Machine documentation

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 4,799 h, load capacity: 16,000 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: duplex, construction height: 4,870 mm, power: 118 kW (160.44 HP), fork length: 2,400 mm, drive type: Diesel, Heavy-duty forklift truck - Diesel Load center: 600 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Air Rear tires type: Air Itjdpfxsz Dc Dnj Ah Ujl Description: Sideshift, tine adjuster, 3rd valve, 4th valve, rear working lights, front working lights, heating, full cab,

Condition: good (used), Year of construction: 2013, Excellent horizontal machining center with Fastems automation system for 10 pallets. Built in 2012, first used in 2013. Including: Automatic pallet changer Internal cooling Renishaw tool sensor Chip evacuation Through-spindle cooling (IKZ) Machine can be seen in operation upon appointment. Immediately available for delivery. More info and videos available on request. Control Fanuc 31i X-axis 850 mm Y-axis 700 mm Z-axis 750 mm B-axis (rotation) 360° Table 500x500 mm Spindle Maximum 14,000 rpm Spindle taper SK40 Number of tools 2 x 60 positions Spindle hours ca 12000h Isdjypb Srepfx Ah Uetl Machine weight approx. 16 tons Floor space required approx. 9000 × 9000 × 2850 mm (including FMS) Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: good (used), Year of construction: 2003, functionality: fully functional, turning length: 450 mm, turning diameter: 310 mm, CNC control Fanuc O-TC 12-fold revolver (VDI30) 3-jaw chuck main spindle 3-jaw chuck sub spindle chip conveyor tool measuring device coolant device Technische Daten / technical details: Umlaufdurchmesser über Bett / rotary diameter over bed 500 mm Umlaufdurchmesser über Planschlitten / rotary diameter over sledge 310 mm max. Drehdurchmesser / max. turning diameter 310 mm Itodpfezvlnvjx Ah Uel max. Drehlänge / max. turning lenght 450 mm X-Weg / X-travel 200 mm Z-Weg / Z-travel 450 mm Drehzahl / spindle speed 4500 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes Stangendurchlass Hauptspindel / bar diameter main spindle 50 mm Eilgang X / rapid feed X 24 m/min Eilgang Z / rapid feed Z 30 m/min. Antriebsleistung Hauptspindel / drive capacity main spindle 11/9 kW Gewicht der Maschine ca. / weight ca. 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2021, operating hours: 4,740 h, Equipment: air conditioning, Empty weight: 36.000 kg Dimensions (LxBxH): 1141 x 300 x 364 cm Track width: 60 cm Digging depth: 6.94 m Iodjz Akt Djpfx Ah Ustl = Additional options and accessories = - Central lubrication

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC Fanuc Series Max. turning diameter on the machine bed: 780 mm Max. turning diameter on the carriage: 630 mm Max. turning diameter: 406 mm Max. turning length: 520 mm Bar passage: 65 mm Spindle nose: ASA A2-6 Spindle bore: 52 mm Spindle speed: 5000 rpm Spindle motor power: 18.5 kW Tailstock bore: 45 mm Tailstock nose: ASA A2-5 Isdpfx Asyiu Dnjh Uotl Bellegrandi tool holders on the spindle and tailstock + 2 self-centering chucks X-axis travel: 260 mm Z-axis travel: 590 mm Y-axis travel: +102 - 51 mm B-axis travel: 590 mm Rapid traverse rate for X/Z/B axes: 30 m/min Rapid traverse rate for Y-axis: 10 m/min Turret type: BMT Number of turret stations: 12 Rotation speed of powered tools: 5000 rpm Dimensions: 3530x1863 mm, H=2163 mm Weight: 5900 kg No. 10 tool holders for powered tools.