Used Doosan Dx520Lc for sale (265)

Condition: excellent (used), Year of construction: 2022, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, 24 station turret, 22KW Motor, Hedpfx Abszt Spnoiefk Main spindle 4000rpm, sub-spindle 4500rpm, Fanuc I series, 3 jaw chucks, swarf conveyor, tool setter, LNS barfeed unit.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 510 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: FANUC, controller model: i Series, total height: 2,950 mm, total length: 2,450 mm, total width: 3,150 mm, table width: 540 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 11,104 h, coolant supply: 20 bar, spindle motor power: 15,000 W, spindle nose: SK40 (DIN69871), number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, The machine features a large working area and a robust construction, making it suitable for both single-piece and series production work. In addition, this machine is equipped with various interesting options, as listed below, and comes with a comprehensive set of tools. The machine is currently installed and operational at our facility and can be inspected by appointment. Additional options & accessories: - Internal cooling (20 bar) - Electronic handwheel - Renishaw OMP 3D probe - 2 machine vices - Chip conveyor - Spindle cooler - Preparation for a 4th axis Hsdpfx Absztvmwjiefk - Approximately 30 SK40 tool holders - All original documentation

Condition: excellent (used), DOOSAN PUMA 3100 XLY CNC LATHE ONLY 2163 RUN TIME HOURS !!!!! UPGRADED FANUC I CONTROL 305 MM HYD CHUCK 420 MM TURNING DIA Hjdozumadjpfx Abiefk 2125 MM TURNING LENGTH MAX SWING 850 MM MAX SWING OVER CROSS SLIDE 670 MM X TRAVEL 293 / Y TRAVEL 130 MM / Z TRAVEL 2190 MM FULL C AXIS AND Y AXIS HYD STEADY - SMW SLU-X-4-MS ( CAPACITY 30 - 245 ) MAX SPINDLE SPEED 2800 TOOL PROBING DRIVEN TOOLS - 2+2 + STATIC HOLDERS SPINDLE POWER 35 HP YEAR 2012 THIS MACHINE HAS BEEN ONE OWNER ONE OPERATOR SINCE NEW - NEVER REQUIRED A REALIGNMENT - IMPECCIBLE CONDITION THROUGHOUT LOCATION NORTHERN IRELAND LOADING - FREE TRANSPORT CAN BE PRICED - PLEASE GIVE FULL ADDRESS

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm spindle taper A2-11 Hodpfx Aovzln Robisfk number of spindle speeds 2000rpm engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 12,000 rpm, total height: 3,295 mm, total width: 3,200 mm, overall weight: 12,500 kg, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, product length (max.): 3,537 mm, tool weight: 8,000 g, number of slots in tool magazine: 40, number of axes: 5, This 5-axis DOOSAN VC 630/5Ax was manufactured in 2013. It features an impressive X-axis travel of 650 mm, Y-axis travel of 765 mm, and Z-axis travel of 520 mm. The machine includes a maximum workpiece weight capacity of 500 kg and a spindle speed of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN VC 630/5Ax universal machining centre we have for sale. Contact us for further details. Hedezt Rwqspfx Abiofk • CNC controls available: FANUC 31i-5, HEIDENHAIN iTNC 530, SIEMENS 840Dsl • Travels: A (tilt) +30° to -120°; C (rotation) 360° • Spindle nose to table: Standard 160–680 mm; with APC 210–730 mm • Spindle center to column guideway: 220 mm • Rapid traverse: X/Y/Z 40/40/36 m/min; A/C 20/30 rpm • Cutting feed: X/Y/Z 18,000 mm/min; A/C 7,200 deg/min • Table: Ø630 mm (standard); APC pallet 500 x 500 mm • Max workpiece: 500 kg; dimensions standard Ø730 x 500 mm; with APC Ø730 x 450 mm • Min table indexing: 0.001° • Spindle: Built-in; 12,000 rpm (optional 20,000 rpm); ISO #40 7/24 BIG-PLUS (optional HSK-A63) • Max spindle torque: 204 N·m • Spindle motor power: FANUC 22/18.5 kW; HEIDENHAIN 23.5/18 kW; SIEMENS 30/24 kW • ATC: MAS403 BT40 (options CAT40/DIN40); 40 tools (options 60/81/101/121); max tool Ø adj 80 mm, without adj 125 mm; max tool length 300 mm; fixed address; tool-to-tool 1.0 s; chip-to-chip 8.5 s

Condition: ready for operation (used), Year of construction: 2018, operating hours: 14,317 h, functionality: fully functional, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 350 mm, controller model: Fanuc i, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 520 mm Travel range, Y-axis: 360 mm Travel range, Z-axis: 350 mm Spindle speed: 12,000 rpm Distance spindle to base plate: min. 150 mm / max. 500 mm Table area: 650 × 375 mm Table load: 2 × 200 kg Tool weight: max. 2.8 kg Tool magazine: 14 positions MACHINE DETAILS Control system: Fanuc i Dimensions & Weight Dimensions (L x W x H): 3,230 × 1,620 × 2,507 mm Machine weight: approx. 5,200 kg Operating hours: 14,317 h EQUIPMENT Rigid tapping – thread drilling without compensation chuck Spindle overspeed and power display Telescopic guards on the X, Y, and Z axes Rapid traverse in the X, Y, and Z axes Door safety switch 3-color indicator light Work area lighting Coolant supply from a 200-liter tank via adjustable coolant nozzles at the spindle nose Internal cooling Machine cover, closed on top / Top cover Oil skimmer Pneumatic clamping system A, 1 pair per pallet Hfsdpezul R Ijfx Abijk Automatic work area door with safety strip Coolant system with delivery pressure: 4.5 bar

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 6,280 h, load capacity: 3,500 kg, lifting height: 5,205 mm, free lift: 1,700 mm, fuel type: gas, mast type: triplex, construction height: 2,515 mm, fork length: 1,500 mm, empty load weight: 5,500 kg, total length: 3,200 mm, drive type: Treibgas, construction width: 1,800 mm, LPG forklift Load centre: 500 Mast type: Triplex Hfedpfoytkkfex Abisk Technical condition: normal Front tyre type: Superelastic Front tyre condition: 80 - 100% Rear tyre type: Superelastic Rear tyre condition: 80 - 100% Sideshift, fork positioner, 3rd valve, 4th valve, rear working light, front working light, roof cover, windscreen, full free lift,

Condition: used, power: 127 kW (172.67 HP), color: orange, lifting height: 2,800 mm, Year of construction: 2017, operating hours: 7,870 h, Year of manufacture: 2017 Hfsdpfx Aboxxkf Soijk Number of cylinders: 6 Empty weight: 15.000 kg Carrying capacity: 10.885 kg GVW: 25.885 kg Dimensions (LxBxH): 758 x 274 x 328 cm Engine type: Doosan Doosan DL06 Stage IV

Condition: used, color: orange, Year of construction: 2017, operating hours: 6,300 h, Empty weight: 23.500 kg Track width: 60 cm Hedpfx Aezi Ecaobisfk Digging depth: 10.795 m

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 2,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, spindle motor power: 30,000 W, total height: 1,915 mm, total width: 2,035 mm, overall weight: 5,650 kg, product length (max.): 3,821 mm, number of axes: 3, This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D control touchscreen with ShopTurn 15-inch display • 3-axis CNC horizontal turning machine with driven tools and tailstock • C-axis main spindle: 360° resolution 0.001° • C-axis speed: 200 rpm • C-axis torque: approx. 1162 Nm • Swing diameter over bed: 720 mm • Swing diameter over cross slide: 590 mm • Max turning diameter: 376 mm • Max turning length: 725 mm • Main spindle bore: 115 mm • Bar capacity: 103 mm • Spindle nose: ASA A2-11 • Max torque: approx. 1112 Nm • Rapid traverse X-axis: 24 m/min • Rapid traverse Z-axis: 30 m/min • Feed force X-axis: 9465 N • Feed force Z-axis: 17379 N • Three-jaw power chuck diameter: 305 mm with soft jaws Hedpfxoy E I Hij Abisfk • 12-station tool turret with BMT65P tool holders • Max driven tool speed: 5000 rpm • Driven tool power: approx. 7.7 kW • Driven tool torque: approx. 75 Nm • Tailstock with quill diameter: 100 mm • Quill stroke: 100 mm • Hydraulic clamping system with hollow cylinder • Monoblock cast iron machine bed, Meehanite construction • 30° slant bed design • Hardened and ground guideways with low-friction coating • Automatic central lubrication • Coolant system: 7 bar pressure • Coolant tank capacity: approx. 235 liters • Hydraulic tank: approx. 20 liters • Full enclosure with working area lighting • Bar feeder interface • Oil skimmer • Electronic safety clutch for X and Z axes • Electrical connection: 400 V, 3-phase, 50 Hz • Total power: approx. 47 kVA • Unused (like new) Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2012, weight max. in kg 1500 kg Hfodpfxjztfyys Abisk serial number FGA04-1290-00480 drive Treibgas weight 2800 kg length in width 940 mm ca. 2.060 mm (je nach Mas engine output ca. 34 kW kW cubic capacity 1.975 cm³ ccm

Condition: excellent (used), Year of construction: 2023, Traverses X Y Z; 1050 x 570 x 510mm, Table size 1300 x 570mm, min-max height spindle to table 150-660mm, spindle speed 12,000rpm, 30 station ATC, spindle taper BT40, spindle power 18.5 kW, Hjdpfxjzqtb Hs Abijfk Fanuc control, Through Spindle Coolant, swarf conveyor

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: PUMA 480, DOOSAN PUMA 480 CNC LATHE 900 MM SWING 650 MAX TURNING 1000 MAX LENGTH TOOL SETTER 600 MM HYD CHUCK BORE 181 MM - TO CONFIRM YEAR 2011 TAILSTOCK COOLANT SWARF CONVEYOR Hfsdpfxsztpy Ds Abijk

Condition: good (used), Year of construction: 2012, operating hours: 7,360 h, Doosan Lynx 220B CNC Slant Bed Lathe With Doosan-Fanuc I Series Control With Ø135mm Collet Chuck. Maximum Swing Ø510mm. Maximum Swing Over Cross Slide Ø290mm. Maximum Turning Ø320mm. Maximum Turning Length 305mm. Bar Capacity Ø51mm. Axis Travel 'X'=175mm, 'Z'=330mm. Rapid Feedrates 'X'=30m/min, 'Z'=36m/min. Spindle Nose A2-6. Maximum Spindle Speed 5,000rpm (15kW Motor). Spindle Nose A2-6. Spindle Through Bore Ø61mm. 12 Station Turret. Tailstock Quill Ø80mm, Quill Travel 80mm, Taper MT4. Tool Shank 25 x 25mm. Boring Bar Sleeve Ø40mm. S/No. ML0014-005414 (2012). Low Running Hours 7,360. Hfodpfszt R U Nox Abiek With Coolant System, Tool Setter, Parts Catcher, Seoam CAH-08 3 Jaw Power Chuck, Tailstock, Foot Switch, Quantity Of Assorted Hard/Soft Jaws & Manuals. Approx Dimensions L2,325 x W1,600 x H1,600mm. Weight 2,900kg.

Condition: excellent (used), Year of construction: 2017, operating hours: 2,728 h, Doosan Puma GT2100 CNC Slant Bed Lathe With Doosan-Fanuc I Series Control Hfsdpfxszt R Uce Abiok With Samchully MH-208 V1 Ø203mm 3 Jaw Power Chuck. Maximum Swing Ø600mm. Maximum Swing Over Cross Slide Ø390mm. Maximum Turning Ø390mm. Maximum Turning Length 562mm. Bar Capacity Ø65mm. Axis Travel 'X'=230mm, 'Z'=580mm. Rapid Feedrates 'X'=24m/min, 'Z'=30m/min. Spindle Nose A2-6. Maximum Spindle Speed 4,500rpm (18.5kW Motor). 12 Station Turret. Programmable Tailstock Travel 580mm, Tailstock Quill Ø80mm, Quill Travel 80mm, Taper MT4. Tool Shank 25 x 25mm. S/No. ML0228-001618 (2017). Note: Low Running Hours 2,728. With Coolant System, Tool Setter, Parts Catcher, Ø165mm Collet Unit, Foot Switch, Quantity Of Assorted Hard/Soft Jaws & Manuals. Approx Dimensions L2,940 x W1,632 x H1,700mm. Weight 3,500kg.

Condition: used, power: 127 kW (172.67 HP), lifting height: 2,750 mm, Year of construction: 2015, operating hours: 7,410 h, Empty weight: 14.400 kg Dimensions (LxBxH): 772 x 264 x 328 cm Engine type: Doosan Doosan DL06K Tier IIIB Hsdpozb I U Djfx Abisfk Bucket volume: 2.5 m^3

Condition: used, fuel type: diesel, color: orange, lifting height: 4,050 mm, Year of construction: 2015, operating hours: 6,900 h, Year of manufacture: 2015 Field of application: Construction Empty weight: 6.000 kg Hfodpfx Aex Hgn Usbisk Dimensions (LxBxH): 567 x 198 x 255 cm Engine type: Yanmar Yanmar 4TNV94L

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 125 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,400 mm, fuel type: gas, mast type: triplex, construction height: 2,145 mm, power: 47 kW (63.90 HP), empty load weight: 4,850 kg, drive type: Treibgas, LPG forklift Load center: 500 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Torque converter Speed class: 20 Condition: Like new Technical condition: New Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Hedpfxjx Aw S Ts Abiofk Rear tire condition: 60 - 80% Sideshift, 3rd valve, 4th valve, Half-cab,

Condition: used, Year of construction: 2020, DOOSAN PUMA 3100LY FANUC control YEAR OF MANUFACTURE: 2020.11 Chuck size: 12 inches Max. turning diameter: 420 mm Hfsdezc Nznepfx Abisk Max. turning length: 1285 mm Bar diameter: 102 mm Z-axis travel: 1350 mm Y-axis travel: 130 mm X-axis travel: 293 mm TAILSTOCK Live center: SMW AUTOBLOCK - Chip conveyor included - Documentation

Condition: used, Year of construction: 2022, 2-axis CNC lathe Doosan Puma GT2100B YEAR OF MANUFACTURE 2022 Hsdpfx Aozud Niobiefk New Fanuc control system Machine with purchased option for a 250mm spindle bore and 81mm bar capacity!!! Spindle bore 81mm 10-inch (250mm) chuck Max. diameter 481mm Max. length 545mm Tailstock Tool probe Included with the machine: - Documentation - Chip conveyor with tank and pump

Condition: used, Year of construction: 2017, operating hours: 7,480 h, Equipment: air conditioning, Year of manufacture: 2017 Empty weight: 18.890 kg Dimensions (LxBxH): 810 x 292 x 348 cm Digging depth: 4.4 m Hsdpjy Nwukefx Abiefk = Additional options and accessories = - Central lubrication - Rubber tracks

Condition: excellent (used), Year of construction: 2018, operating hours: 5,742 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, controller model: FANUC i-Series, workpiece weight (max.): 1,300 kg, total height: 3,100 mm, total length: 4,400 mm, total width: 2,450 mm, table width: 670 mm, table length: 1,500 mm, overall weight: 8,500 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 1,963 h, coolant supply: 20 bar, spindle motor power: 18 W, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, USED ​​"DOOSAN DNM 6700" 3-axis vertical machining center with Fanuc i-Series CNC Hfjdjzrn Dxopfx Abiok

Condition: ready for operation (used), Year of construction: 2018, operating hours: 18,845 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 53 mm, travel distance Z-axis: 830 mm, spindle motor power: 33,000 W, controller manufacturer: SIEMENS, controller model: 828D, number of axes: 3, This 3-axis DOOSAN Puma 2600 SY II was manufactured in 2018, designed for precision in horizontal turning. Ideal for complex machining tasks, this machine ensures robust performance and durability. If you are looking to get high quality turning capabilities consider the DOOSAN Puma 2600 SY II machine we have for sale. Contact us for more information. Additional equipment • Mekiload Gantry Loader • Renishaw Equator • Renishaw Equator • Machine includes a rotary indexing magazine • Machine includes a gantry robot Machine Benefits Qualitative Machine Benefits • Tool change time: 1. 0 second • Max speed (station): 5000 rpm • Holder for turning tools: 25 x 25 mm • Holder for boring bar: Ø50 mm • Coolant pump capacity: 1. 5 kw Hodjyr R A Eopfx Abiefk Technical Machine Benefits • Max. Turning diameter over bed: 780 mm • Max. Turning diameter over slide: 630 mm • Max. Turning length: 760 mm • Main spindle torque: 719 nm • Spindle mount (main): a2 #8 • Sub spindle speed: 6000 rpm • Sub spindle power (30 min): 18. 2 kw • Sub spindle torque: 220 nm • Spindle mount (sub): a2 #5 • Number of stations: 24 (12 driven) Extra Information Machine still under power

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, turning length: 610 mm, turning diameter: 410 mm, spindle motor power: 18 W, spindle speed (min.): 30 rpm, spindle speed (max.): 3,500 rpm, spindle bore: 81 mm, travel distance X-axis: 265 mm, travel distance Z-axis: 680 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, total height: 1,700 mm, total length: 3,500 mm, total width: 1,700 mm, spindle nose: ASA 8, overall weight: 4,900 kg, swing diameter over top slide: 460 mm, spindle diameter: 255 mm, Equipment: documentation/manual, USED ​​3-axis lathe with driven tools and Fanuc 0i-TF CNC Hfjdpszrnl Aofx Abiok

Condition: like new (used), Year of construction: 2020, functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 630 mm, turning diameter: 376 mm, spindle motor power: 18 W, spindle speed (min.): 40 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 81 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, bar passage: 81 mm, total height: 2,170 mm, total length: 4,400 mm, total width: 2,100 mm, overall weight: 6,650 kg, spindle diameter: 254 mm, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​6-axis CNC lathe with counter spindle, live tools and Y-axis and FANUC 0i-TF PLUS CNC Hfodozrmiaspfx Abijk