Used Doosan Dx210W for sale (283)

Condition: used, Year of construction: 2016, machine/vehicle number: DHKCEWARHG5001071, Operating weight: 22,500 kg, power: 141.2 kW, operating hours: approx. 3,400 h, with blade support and adapter plate, manufacturer: LEHNHOFF Rjdpfxoy Rvmbo Aczsw

Condition: excellent (used), Year of construction: 2015, operating hours: 3,983 h, functionality: fully functional, Doosan Lynx 220LC CNC Turning Center Lathe, New 2015, Specifications, Specifications, Main Spindle Chuck 8", Maximum Swing 20.08, Maximum Cutting Diameter 12.6", Maximum Machining Length 20.7", Main Spindle HP 20, Main Spindle RPM 4000 RPM, Main Spindle Nose A2-6", Main Spindle Bore 2.99", Tool Storage Type Turret, Number of Tool Stations 12, X Axis Travel 6.89", Z Axis Travel 21.65", Rapid Traverse Rate X 1181 IPM, Rapid Traverse Rate Z 1417 IPM, Machine dimensions lxwxh, 90"x72"x66", Machine weight, 7,780 lbs., Equipped With, Fanuc i CNC Control, Tool Presetter, Parts Catcher, Turbo Chip Conveyor, Barfeed Interface, Tailstock, 8" Samchully 3 Jaw Hydraulic Chuck, Coolant System with Tank & Pump, Card Drive Interface, RS 232 Port Interface, Misc. Tool Holders, Rodpszh E Utjfx Aczsw

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm Redpjvzln Refx Aczsw engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available

Condition: good (used), Year of construction: 2013, Traverses XYZ: 762 x 435 x 510mm, table size 920 x 435mm, ISO40 spindle taper, spindle speed 12000 rpm, FANUC i Control, spindle motor power 15kW, 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor Redpezhwg Uofx Aczow

Condition: good (used), Year of construction: 2011, 850mm Swing, 525mm Max Cutting Diameter, 1310mm max turning length, Redpfxezhwghs Aczow 10 Station Turret, 102mm bar capacity, 2800rpm 22kW Spindle, Fanuc I series, 3 jaw chuck, Low Volt Light, Tailstock,

Condition: good (used), Year of construction: 2013, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1500rpm spindle, Rjdpfx Aewnfzcsczew 165mm bar capacity, 10 station turret 45kW spindle motor, FANUC control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: good (used), Year of construction: 2012, 300mm max cutting diameter, Rodpfezg Eb Dsx Aczjw 510mm mm max turned length, 51mm bar capacity, 11kW motor, Spindle speed 6,000 rpm, milling speed 6,000 rpm, sub-spindle speed 6,000rpm, C axis 0.001 degrees, Fanuc oi-Series Control, 3 Jaw Chuck, Tool setter, 12 Station turret, parts catcher, parts conveyor

Condition: ready for operation (used), Year of construction: 2014, operating hours: 19,865 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: FANUC, controller model: Series 31i-model B, total height: 3,422 mm, total width: 7,297 mm, table load: 1,500 kg, overall weight: 18,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 40, tool weight: 30,000 g, product length (max.): 3,780 mm, number of axes: 4, This 4-axis DOOSAN NHP6300 was manufactured in 2014. It features an impressive X-axis travel of 1,050 mm, Y-axis travel of 900 mm, and Z-axis travel of 1,000 mm. The machine includes a maximum pallet load of 1,500 kg and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DOOSAN NHP6300 horizontal machining centre we have for sale. Contact us for further details. • Distance from top of pallet to spindle center: 100–1,100 mm • Distance from pallet center to spindle nose: 75–975 mm • Pallet • Type: Indexing (rotary) • Indexing angle: 1° • Size: 630 × 630 mm • Maximum load: 1,500 kg • Mounting pattern: 24 × M16 × P2.0 {5–18H8} • Maximum workpiece size (Ø × H): Ø1,050 × 1,350 mm • Spindle • Speed: 10,000 rpm (options: 6,000 / 15,000 rpm) • Taper: ISO 50 (7/24 taper) • Maximum torque: 489 Nm (options: 599.8 / 350 Nm) • Feed rates • Rapid traverse (X/Y/Z): 60 / 60 / 60 m/min • Maximum cutting feed: 30,000 mm/min • Automatic Pallet Changer (APC) • Number of pallets: 2 • Type: Rotary shuttle • Change time: 12 s • Drive: Servo motor • Automatic Tool Changer (ATC) • Tool interface: BT / CT / DIN (HSK optional) • Magazine type: Chain • Standard capacity: 40 tools (options: 60 / 90 / 120 / 150) • Matrix magazine capacity: 196 / 256 / 316 / 376 tools • Maximum tool diameter: Ø130 mm (Ø125 mm per note) • Maximum tool diameter with adjacent pockets empty: Ø320 mm • Maximum tool length: 630 mm (HSK: 700 mm) • Tool-to-tool change time: 2.0 / 3.5 s • Chip-to-chip change time: 5.0 / 6.5 s • Motor power and utilities • Spindle motor: 25 / 30 kW (options: 22 / 30, 50 / 55 kW) • Compressed air supply: 0.54 MPa • Tank capacities • Coolant: 925 l • Lubrication: 7.2 l Additional equipment • Fastems automation system Technical Specification Taper Size ISO 50 Rsdpfxozh Hpfo Aczew

Condition: good (used), Year of construction: 2007, Parts shown by hand not come. Technical details are shown on picture. Rsdpezibgzsfx Aczsw

Condition: used, color: orange, lifting height: 3,410 mm, Year of construction: 2019, operating hours: 3,630 h, Year of manufacture: 2019 Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Digging depth: 4.88 m = Additional options and accessories = Rsdpfx Acoxqfb Eozsw - Rubber tracks

Condition: used, fuel type: diesel, color: orange, lifting height: 4,050 mm, Year of construction: 2015, operating hours: 6,800 h, Year of manufacture: 2015 Empty weight: 6.000 kg Dimensions (LxBxH): 567 x 198 x 255 cm Rodpfox Hgn Ujx Aczow Engine type: Yanmar Yanmar 4TNV94L

Condition: used, Year of construction: 2012, New mill spindle 2026 Turning diameter: 760 mm Turning length: 1540 mm Control: FANUC Chuck diameter: 254 mm Bar capacity: 76 mm Rodpfxszg N Die Aczew Spindle bore: 86 mm Swing over bed: 1000 mm X-axis travel: 630 x 220 mm Z-axis travel: 1585 x 1515 mm Y-axis travel: 230 mm Spindle speed: 4,000 rpm Spindle nose: A2-8 Milling spindle speed range: 12,000 rpm Tool changer: 40 positions Turret: 12 stations Tool holder: BMT 65 P, Capto Drive power: 26/22 kW Total power requirement: 100 kVA Machine weight: approx. 15.5 t Space required: approx. 6.1 x 2.7 x 3.0 m Options: High pressure coolant 60 bar Auto door & Safety Edge Auto tool setter Coolant blast for chuck jaw cleaning Coolant gun Dual chuck pressure LNS Bar feed interface Prep. for special steady rest lower turret Thru-coolant for Main and Sub spindle Tool load monotoring function Profibus 3 color patrol lamp Renishaw RMP60 INCL. high speed SKIp Function

Condition: excellent (used), With C-axis Rodpfx Acezhmnbszew With driven tools FANUC 21i TB Manual Guide control Turning diameter max 355 mm Turning length -1330 mm Spindle speeds -2'800 rpm Top turret tool holders 12 driven positions Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 2020, Lathes Travel distance X: 293 mm Travel distance Y :130 mm Travel distance Z: 1350 mm turning length: 1285 mm max. turning diameter: 850 mm max. circulation diameter: 420 mm spindle boring: 102 mm input Power: 26 kW max. turning moment: 1123 NM range of revolutions till: 2800 rpm Control: Fanuc I-series powered tools control Fanuc The machine offers a maximum turning length of 1,285 mm, a maximum turning diameter of 420 mm, and a maximum swing over bed of 850 mm. The main spindle provides a spindle bore of 102 mm and a speed range up to 2,800 rpm, delivering high torque and stable machining performance. Rsdpfxeyrfl Ue Aczsw Equipped with a 12-station turret, driven tools, and a FANUC i-Series control, the machine is well suited for complex turning and milling operations in modern production environments.

Condition: used, Year of construction: 2011, machine/vehicle number: DWBHEDSOEB0050903, Operating weight: 21,500 kg, Power: 110 kW, Operating hours: approx. 3,500 h, equipped with quick coupler. NOTE: The concrete pulverizer shown in the pictures is not included with this item. Redpfx Acoy Rvmzszew

Condition: used, Year of construction: 2017, machine/vehicle number: DHKCEBBVTH0001275, Operating weight: 24,400 kg, power: 124 kW, operating hours: 5,300 h, with quick coupler, manufacturer: LEHNHOFF Redpfx Aoy Rvmueczjw

Condition: used, Year of construction: 2005, functionality: fully functional, Very well-maintained machine, regularly serviced and in good condition. - Includes a large number of tool holders, both live tooling and static tooling. Rsdjzh Rhfjpfx Aczew - Bar feeder included. - Gantry loader included. - One additional newly refurbished spindle included. - 80-position tool magazine with Capto C6 tooling. The machine can be inspected under power and in production until 17 July.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 210 h, load capacity: 16,000 kg, lifting height: 4,500 mm, free lift: 1,470 mm, mast type: triplex, construction height: 3,035 mm, fork length: 2,400 mm, empty load weight: 26,850 kg, total length: 5,600 mm, construction width: 2,540 mm, Diesel forklift Load center: 1200 Mast type: Triplex Technical condition: very good Front tire type: Superelastic Rjdpfx Ajzf Sfyeczow Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Description: Very good, like-new condition. The unit will receive a new inspection and a new certification according to UVV (German regulations for occupational safety and health). Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, roof protection, windshield, heater, air conditioning, full free lift,

Condition: used, color: orange, Year of construction: 2021, operating hours: 3,828 h, Empty weight: 31.000 kg Dimensions (LxBxH): 1077 x 339 x 300 cm Track width: 60 cm Digging depth: 5.395 m Rjdpfxezf I Hae Aczew = Additional options and accessories = - Rubber tracks

Condition: used, Year of construction: 2008, turning length: 1,043 mm, turning diameter: 550 mm, spindle bore: 116 mm, spindle speed (max.): 2,000 rpm, CNC lathe, 2 axes, Doosan Puma 400B Year: 2008 Fanuc 21iTB with Manual Guide Redpfx Acjzh Uq Dezew Max. turning diameter: 550mm Max. turning length: 1043mm Z-axis travel: -1100mm Chuck: 380mm Spindle bore: 116.5mm Max. spindle speed: 2000 rpm Spindle gearbox: low gear, high gear 10-tool turret Steady rest with SMW autoblock, diameter 30-245mm Measuring probe Tailstock Chip conveyor with tray and pump Documentation

Condition: excellent (used), Year of construction: 2024, turning length: 830 mm, turning diameter over cross slide: 720 mm, spindle motor power: 35,000 W, spindle bore: 115 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 830 mm, rotational speed (max.): 2,800 rpm, CNC Lathe with c-axis DOOSAN - PUMA GT3100M MACH-ID 9658 Make: DOOSAN Type: PUMA GT3100M Control: Siemens 828D ShopTurn Year: 2024 Part catcher Cromar chip conveyor Tool eye probe CROMAR Chip conveyor Samchully Chuck 380 mm 5 BMT Tool holders Max. turning Ø: 720mm X-Axis: 260mm Z-Axis: 830mm Spindle bore: 115mm Speedrange: 2800Rpm Spindle power: 35kW Redpfx Aezfgrzeczew ATC / revolver: 12 Speed live tools:5000Rpm Speed live tools:5000Rpm Power live tools:7.5kW Chip conveyor: Yes Tool eye: Yes Pinole taper: 5Mk Stroke pinole: 100mm Quill Ø: 100mm Length: 4200mm Width: 2100mm Height: 2100mm Weight: 5650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, turning length: 330 mm, turning diameter: 350 mm, spindle bore: 65 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 340 mm, spindle motor power: 15 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, total height: 1,700 mm, total length: 3,600 mm, total width: 1,600 mm, Equipment: rotational speed infinitely variable, USED ​​DOOSAN LYNX 2100B 2-axis lathe with Fanuc i-Series CNC Rodpfxozhaaws Aczow

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, FOR SALE: Exceptional Lot of 4 DOOSAN Puma 2600S CNC Lathes A rare opportunity on the used market! Ideal for immediately increasing your production capacity or upgrading your machine park. We offer a consistent lot of 4 CNC lathes with 2 axes (X, Z) from the reputable DOOSAN brand, known for their rigidity, precision, and longevity. 🛠️ COMMON FEATURES OF THE RANGE: Brand / Type: DOOSAN Puma 2600S (Note: "26005" is understood as a variation of the standard Puma 2600 model) Kinematics: 2 robust axes (X, Z) CNC Control: FANUC CNC (industrial reliability, easy to learn) Compliance: Original CE certificate available for each machine Documentation: Technical manuals and operating instructions included 📦 DETAILED COMPOSITION OF THE LOT (4 MACHINES): Doosan Puma 2600S Lathe — Ref. A072 Year: 2012 Equipment: Sold complete with its chip conveyor, documentation & CE certificate. Doosan Puma 2600S Lathe — Ref. A074 Year: 2012 Equipment: Sold complete with its chip conveyor, documentation & CE certificate. Doosan Puma 2600S Lathe — Ref. A076 Rodpfx Aozd R E Neczew Year: 2013 (Newer) Equipment: Sold complete with its chip conveyor, documentation & CE certificate. Doosan Puma 2600S Lathe — Ref. A077 Year: 2012 Equipment: Sold complete with its chip conveyor, documentation & CE certificate.

Condition: used, Year of construction: 2007, Turning diameter 300 mm Turning length 600 mm Control FANUC, 18i-TB Turning diameter over bed slide 230 mm Travel x1 165 mm Travel z1 700 mm Travel x2 190 mm Travel z2 720 mm Travel -y axis +/- 50 mm Main spindle bore 76 mm Main spindle speed 5.000 U/min Main spindle drive 22 kW Max. torque on the spindle 208 Nm Rodpezdrppefx Aczjw Sub spindle bore 76 mm Sub spindle speed 5.000 U/min Sub spindle drive 22 kW Max. torque on the spindle 208 Nm Tool turret 2 x 12 Stat. Number of driven tool stations 2 x 12 Speed of driven tools 5.000 U/min Max. torque 47 Nm Work piece power 5,5 kW C-axis resolution 0,001 ° Rapid traverse x + z axis 20 / 40 m/min Rapid traverse y-axis 7,5 m/min Total power requirement 68,4 kVA Included Bar feeder, Tools and driven tools.

Condition: used, Year of construction: 2022, turning diameter 420 mm turning length 1350 mm spindle passage 101 mm control Siemens SL 828D ShopTurn number of controlled axis 4 turning speed range 3000 U/min power requirement 22/18,5 kW rapid speed 30 m/min number of tapers in turret head 12/24 BMT 65 number of driven tools in turret 12 BMT 65 Spindel speed of driven tools 5000 U/min Spindelpower on driven tool 7,5/5,5 kW y-axis +/- 65 mm tail stock MT-5 weight 8,0 t dimensions 5,7 x 2,3 x 2,32 m Heavy CNC- lathe with driven tools and Y- Axis in very good condition. First instalation: 03/2023 Appr. 5400 h Power on. Rodpjzfqf Sofx Aczsw - 2x 3-jaw chuck Ø 325 + 400 mm - some fixed tool holders - Tool pre- setter - chip conveyor - 4x driven tool holders - 2 + 2 driven toolholders with Capto C4 - oildust collector - band filter system with appr. 1000 ltr. - hydr. steady moveable wit turret SMW Autoblock SLU-X3.1 (Ø 20- 165 mm) - 3 colour signal lamp - coolant gun - some jaws - external programming system MCS40501/2 - build in spindle