Used Doosan Dx480Nlc for sale (292)

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control Dujdpfx Asvzln Rodwor x-axis 390 mm z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available

Condition: good (used), Year of construction: 2013, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1500rpm spindle, 165mm bar capacity, 10 station turret 45kW spindle motor, FANUC control, Dujdpfx Adownfzcjwjr 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: excellent (used), Year of construction: 2002, operating hours: 4,844 h, functionality: fully functional, turning diameter over cross slide: 449 mm, turning length: 1,330 mm, turning diameter: 393 mm, spindle bore: 90 mm, spindle speed (max.): 3,500 rpm, Daewoo Puma 300LB CNC Lathe Model: Puma 300 LB Year: 2002 Control: FANUC 18i-T Swing over Bed: 580mm Duodpoyxq A Tefx Adwjr Swing over Carriage: 449mm Max. Turning Dia.: 393mm Tuning Length: 1330mm Spindle Bore: 90mm dia. Spindle Speeds: 3500 RPM Machine With: 300mm Power Chuck Manual Fixed Steady Tool Holders Manuals

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Technical details turning diameter 760 mm turning length 1540 mm control Fanuc 31i-B dimensions of machine 5500 x 2700 x 3110 mm Dusdpeyzzf Refx Adwer chip conveyor 6900 x 2400 mm total power requirement 94,42 kW weight of the machine ca. 15,5 t Additional information Turning center with infinitely variable swiveling milling head and Y-axis, motorized lower turret and subspindle. Condition: Very well preserved, machine comes from a company liquidation. Time recording: Control unit on: 13127 hours Runtime: 3833 hours Processing time: 2835 hours The upper head is fed by a tool magazine and can turn or mill at various angles. Even highly complex components can be completely machined without further repositioning. Fanuc 31i-B CNC control Swing diameter over bed: 1000 mm Maximum turning diameter: 760 mm Maximum turning length: 1540 mm Maximum bar diameter (manual/continuous): 76/76 mm Y-axis travel: 230 mm (±115 mm) Clamp (counter spindle) ASA interface: A2-8 Spindle speed: 4000 rpm AC motor power (cont./30 min.) 22/26 kW Turning/milling head B-axis rotation / indexing 240 deg. (±120 deg.) Tool holder Capto C6 Speed in revolutions per minute 12000 rpm AC motor power 30 min. 15/18.5 kW Number of tools 40 (Opt. 80) Tool turret Number of driven tools 12 (12)

Condition: excellent (used), Year of construction: 2016, Traverses XYZ: 1020 x 540 x 510mm, table size 1200 x 540mm, ISO40 spindle taper, spindle speed 12000 rpm, Heidenhain Control, spindle motor power 15kW, 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor Duodpfx Adoyylzaswor

Condition: excellent (used), Year of construction: 2017, Traverses X Y Z; 1300 x 670 x 625mm, Table size 1500 x 670mm, maximum table load 1300 kgs. min-max height spindle to table 150-775mm, spindle speed 12,000rpm, spindle taper BT40, 30 station ATC spindle power 18.5 Kw, Fanuc OI series control, Dujdpsyyldhofx Adwjr spindle probe, Through spindle coolant

Condition: used, lifting height: 3,410 mm, Year of construction: 2019, operating hours: 2,690 h, Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Digging depth: 4.88 m Djdpfx Aoyn En Uodweur = Additional options and accessories = - Rubber tracks

Condition: ready for operation (used), Year of construction: 2015, operating hours: 7,200 h, spindle speed (max.): 2,000 rpm, travel distance X-axis: 352 mm, travel distance Z-axis: 1,105 mm, controller manufacturer: FANUC, number of axes: 2, This DOOSAN PUMA 4100B was manufactured in 2015. A robust horizontal turning machine featuring a Fanuc 32i CNC system, it offers a maximum turning diameter of 550 mm and a length of 1,042 mm. Equipped with a 10-station turret and a chip conveyor, it's ideal for efficient machining with 7,200 hours of operation. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 4100B machine we have for sale. Contact us for more information. • CNC: Fanuc 32i with Manual Guide • Chuck diameter: 380 mm • Max turning diameter: 550 mm • Max turning length: 1,042 mm • Bar capacity: 117 mm • Turret: 10 stations • Condition: Machine overhauled Additional equipment • Chip conveyor Dsdpsx D Dtajfx Adwsur • Touch probe arm

Year of construction: 2005, condition: used, max. turning diameter 540 mm max. turning length 1.020 mm bar capacity 65 mm Spindle speed 5.000 min -1 driven tools turning speeds 10.000 U/min control FANUC 18i-TB Dimensions (L x W x H) 4.520 x 2.300 x 2.600 mm machine weight ab. 12.000 kg CNC Turning- and Milling Center | DOOSAN - PUMA MX 2000 S equipped with chip conveyor. Additional equipment: + counter spindle + B axis Djdpfxolmr Eie Adwjur The machine is in good condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MX2000S | MX-2000 S | MX 2000S | MX2000 S

Condition: used, Year of construction: 2018, travel -x axis 1.050 mm travel -y axis 570 mm travel -z axis 510 mm control HEIDENHAIN - TNC620 number of spindle speeds 12.000 U/min tool taper BT 40 table dimension (L x W) 1300 x 570 mm numbers of positions in the tool changer 30 Milling machining centers - vertical | DOOSAN - DNM 5700 equipped with 30-way tool changer, ITC cooling system and chip conveyor. Dsdpow Dgcasfx Adwjur The machine only has 13.600 spindle hours. The machine is in a well-maintained condition and has exclusively worked on Aluminum and Plastics. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM5700 | DNM-5700

Condition: used, Year of construction: 2021, operating hours: 4,056 h, Drive: Wheel Empty weight: 19.000 kg Dusdpfx Aeyzcdzsdwjr Digging depth: 5.725 m = Additional options and accessories = - Digger blade

Condition: used, Year of construction: 2012, operating hours: 10,731 h, Location: Lleida (Lleida) Djdsyzcduspfx Adweur The used Doosan DL300 wheel loader is engineered for operators to work efficiently for hours under excellent conditions. Offers more space, improved visibility, air conditioning, a very comfortable seat, ample storage, and additional features. Bucket capacity: 3 m3 (3,000 l). Second-hand wheel loader for sale, equipped with a front bucket, ideal for building construction, mining, roadworks, highways, tunnels, or hydraulic dam projects. Used Doosan DL300 brand loader. This Doosan DL300 loader outperforms the competition, featuring technologies that lower fuel consumption and set new standards in cab comfort. CE

Condition: used, Year of construction: 2014, operating hours: 5,079 h, lifting height: 4,320 mm, free lift: 1,480 mm, fuel type: gas, mast type: triplex, fork length: 1,190 mm, fork width: 1,080 mm, total height: 2,190 mm, total length: 2,810 mm, total width: 1,250 mm, color: other, Empty weight: 5.152 kg Dedpfxeyx H Rys Adwour Lifting capacity: 3.500 kg - Year: 2014 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: FGA0E-1290-01085 - Operating hours: 5079 - Lifting capacity: 3500kg - Lifting height: 4320mm - Overhead clearance: 2180mm - Free lift: 1480mm - Fork length: 1190mm - Maximum fork width: 1080mm - Minimum fork width: 260mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Work lights, Half cabin, Free-lift - Mast: Triplex - Drive: LPG - Motor brand: GM - Transport dimensions: 2810mm x 1255mm x 2190mm (l x w x h) - Transport weight [kg]: 5152kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2018, operating hours: 18,042 h, Type of fuel: Diesel Empty weight: 13.225 kg Dimensions (LxBxH): 400 x 223 x 395 cm Lifting capacity: 9.000 kg Lift height: 510 cm Fork dimensions: 2.200 x 2.240 mm Djdpfex I Np Rjx Adwjur - Year: 2018 - Documentation available: Yes - └ Type Documentation: Technical data - CE marking present: Yes - CE certificate present: No - Serial number: FDB0X-2520-00262 - Operating hours: 18042 - Lifting capacity: 9000kg - Lifting height: 5100mm - Overhead clearance: 3950mm - Free lift: 0mm - Fork length: 2200mm - Maximum fork width: 2240mm - Minimum fork width: 530mm - Number of wheels: 6 Wheels - Attachment: Side-shift, Fork positioner - Options: Work lights, Radio, Camera, Full cabin, Heating - Mast: Duplex - Drive: Diesel - Motor brand: Doosan - Transport dimensions: 4000mm x 2230mm x 3950mm (l x w x h) - Transport weight [kg]: 13225kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, lifting height: 4,650 mm, Year of construction: 2017, operating hours: 6,890 h, Year of manufacture: 2017 Djdpoxqfhlsfx Adwsur Empty weight: 8.500 kg Digging depth: 4.175 m = Additional options and accessories = - Rubber tracks

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 3 h, load capacity: 3,000 kg, lifting height: 4,730 mm, free lift: 1,400 mm, fuel type: gas, mast type: triplex, construction height: 2,165 mm, fork length: 1,200 mm, drive type: Treibgas, LPG forklift truck Mast type: Triplex Duodpfx Adsv Eff Rswjr Transmission: Automatic Technical condition: New Front tires type: Superelastic Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires condition: 80 - 100% Description: New machine including 12-month warranty or 1000 operating hours, new UVV inspection. We are happy to arrange affordable transport for you. Sideshift, Integrated sideshift 3rd valve, 4th valve, rear work lights, front work lights, roof cover, front windshield, full free lift, CE certificate.

Condition: good (used), Year of construction: 2011, 320mm max cutting diameter, 510mm swing, 305mm max turned length, 51mm bar capacity, 11kW motor, Dusdpfxeyvhv Es Adwer Fanuc Oi-Series Control, 3 Jaw Chuck, Tool setter, Parts Catcher, 12 Station turret, spindle speed 5000rpm, swarf conveyor, multifeed barfeed.

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, controller manufacturer: FANUC, controller model: Series 21i-MB, spindle speed (max.): 8,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 60, number of axes: 4, This 4-axis DOOSAN ACE HC-500 was manufactured in 2005. It features an X-axis travel of 850 mm, Y-axis travel of 700 mm, and Z-axis travel of 750 mm. The machine includes a robust pallet size of 500 x 500 mm with a maximum pallet load of 500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN ACE HC-500 horizontal machining centre we have for sale. Contact us for further details. • Distance spindle face to pallet center: 150–900 mm • Distance spindle center to pallet surface: 50–750 mm • Pallet size: 500 x 500 mm • Max. pallet load: 500 kg • Spindle orientation built-in sensor • Through-spindle coolant: 70 kg/cm², max flow 20 L/min, pump power 3.7 kW • Spindle completely overhauled in 2023 • Z-axis ball screw replaced in 2020 Dsdpfx Aeyxppljdwour Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2019, x-travel 1300 mm y-travel 670 mm Dujdoyzt Anepfx Adwer z-travel 625 mm control Siemens Sinumerik 828D weight of the machine ca. 8500 kg

Condition: used, Year of construction: 2012, turning diameter 320 mm turning length 330 mm control Fanuc oi-TD weight of the machine ca. 2600 kg Dedpfjyzt Ahjx Adweur

Condition: ready for operation (used), Year of construction: 2018, operating hours: 6,193 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 340 mm, spindle motor power: 15,000 W, controller manufacturer: FANUC, controller model: F0i, number of axes: 2, Horizontal turning machine manufactured in 2018. This DOOSAN Lynx 2100A features a maximum turning diameter of 350 mm and a turning length of 330 mm. It is equipped with a spindle speed of 5,000 rpm and a chuck size of 8” (210 mm). If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 2100A machine we have for sale. Contact us for further details regarding this machine. • Control: Fanuc F0i • Operating hours: 6,193 h • Spindle: 8" chuck (210 mm); bar capacity Ø52 mm • Capacity: Max turning diameter Ø350 mm; max turning length 330 mm • Axes: rapid traverse X/Z 30 m/min • Turret: 12 stations; tool change time 0.15 s; tool shank 25 x 25 mm; boring bar Ø32 mm • Tailstock: Programmable with rotating tip • Certification: CE • Software/monitoring: Doosan tool load monitoring system Additional equipment • Basic tool holder set Dedpsyxhqzefx Adwjur • Oil mist extractor • Transformer • Bar feeder preparation • Workpiece catch with collection box • Automatic tool gauge • High-pressure cooling 7 bar (1.1 kW) • Oil separator • Chip collector • Electrical noise suppression Technical Specification Counter Spindle No Driven Tools No

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 117 h, load capacity: 3,000 kg, lifting height: 5,000 mm, free lift: 2,000 mm, fuel type: gas, mast type: triplex, Equipment: CE marking, full service history, head guard, lighting, trailer coupling, For sale is my Dosan 30 GP plus forklift. Apart from a few paint scratches, it is in like-new condition both technically and visually. It has only 117 operating hours and has been serviced as per manufacturer specifications. Two doors have been retrofitted, as well as a fourth hydraulic function for clamp, sideshift, etc. Collection only, upon advance payment by bank transfer or cash. The price is net, plus VAT. You will receive a proper invoice with VAT shown separately. Dusdpfx Aoyzpy Njdwor

Condition: ready for operation (used), functionality: fully functional, power: 107 kW (145.48 HP), empty load weight: 11,600 kg, Year of construction: 2010, Equipment: air conditioning, all wheel drive, cabin, Wheel Loader DOOSAN DL200 Year: 2010 Approx. 14,000 operating hours 107 kW 11.6 tonnes - incl. bucket - hydraulic Volvo quick coupler - auxiliary hydraulic circuit up to the fork carrier - air conditioning - central lubrication - rearview camera - Good 20.5R25 tyres - Machine is immediately ready for operation! - Original paint! Duodsyyy H Repfx Adwer - Not cleaned and not repainted! - Direct from the construction site! Sale price: €22,900 net Available with new pallet forks for an extra charge! Also available with low-cost delivery!

Condition: excellent (used), power: 103 kW (140.04 HP), fuel type: diesel, color: orange, Year of construction: 2023, operating hours: 244 h, Equipment: air conditioning, Drivetrain AdBlue system: Yes Drive: Wheel Make of engine: DL06V Weights Dujdjyibdxjpfx Adwjr Empty weight: 18.500 kg Functional CE mark: yes Condition Technical condition: very good Visual appearance: very good Identification Serial number: DHKCEWCXCP5002429 Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Aeolus Emission level: Stage V / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 8,04x2,5x2,85 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information = Additional options and accessories = - 2-piece boom - Ad blue - Battery disconnector - Blade - Hammer/shear hydr. circuit - Safety line rupture valve - boom/hoist - Safety line rupture valve - dipper/stick - Slope/rotator hydr. circuit

Condition: good (used), Year of construction: 2001, In good technical condition and fully functional. Year of manufacture: 2001 Maximum turning diameter: 310 mm Dujdjwxv Dijpfx Adwer Maximum turning length: 750 mm Lathe with FEDEK feeder. Machine weight: approx. 4,800 kg. Dimensions: Length: 3400 mm, Width: 1800 mm, Height: 1900 mm