Used Doosan Dx55W for sale (259)

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available Rsdsvzln Rspfx Agmocd

Condition: excellent (used), Year of construction: 2023, Traverses X Y Z; 1050 x 570 x 510mm, Table size 1300 x 570mm, min-max height spindle to table 150-660mm, spindle speed 12,000rpm, 30 station ATC, spindle taper BT40, spindle power 18.5 kW, Rcodpfxjzqtb Hs Agmod Fanuc control, Through Spindle Coolant, swarf conveyor

Condition: used, color: orange, lifting height: 3,410 mm, Year of construction: 2019, operating hours: 3,640 h, Year of manufacture: 2019 Field of application: Construction Rcjdpfexqfb Esx Agmod Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Digging depth: 4.88 m = Additional options and accessories = - Rubber tracks

Condition: used, Year of construction: 2011, control FANUC Series 31i-MODEL A weight approx. 9.000 kg rated capacity 75,21 kVA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Rcedozpzfwspfx Agmod Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 2010, control FANUC Series 31i-MODEL A weight approx. 9.000 kg rated capacity 75,21 kVA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Rcjdpfxozpzfqe Agmjd Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 2007, turning diameter 300 mm turning length 600 mm control FANUC, 18i-TB turning diameter over bed slide 230 mm travel x1 165 mm travel z1 700 mm travel x2 190 mm travel z2 720 mm travel -y axis +/- 50 mm main spindle bore 76 mm main spindle speed 5.000 U/min main spindle drive 22 kW max. torque on the spindle 208 Nm sub spindle bore 76 mm sub spindle speed 5.000 U/min sub spindle drive 22 kW max. torque on the spindle 208 Nm tool turret 2 x 12 Stat. number of driven tool stations 2 x 12 speed of driven tools 5.000 U/min max. torque 47 Nm tool taper BMT 55 C-axis resolution 0,001 ° rapid traverse x + z axis 20 / 40 m/min rapid traverse y-axis 7,5 m/min work piece power 5,5 kW total power requirement 68,4 kVA Accessories: collet fixture make KITAGAWA, CRS 66, on main spindle, Rcodey Tpliopfx Agmsd hydr. 3-jaw chuck make KITAGAWA, BB 208, 210 mmø, on sub spindle, various tool holders for turret, bar loader make HYDRAFEED, model MULTIFEED MX-1B for bar dia. 3 - 80 mm and bar length up to 1650 mm, chip conveyor, coolant with belt filter device

Condition: used, lifting height: 4,650 mm, Year of construction: 2016, operating hours: 8,640 h, Year of manufacture: 2016 Empty weight: 8.500 kg Digging depth: 4.175 m = Additional options and accessories = Redpfxey Nw Abo Agmocd - Rubber tracks

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 26,000 W, spindle speed (max.): 3,500 rpm, bar diameter (max.): 76 mm, total width: 2,210 mm, total height: 2,480 mm, overall weight: 12,700 kg, controller manufacturer: FANUC, controller model: Series 31i-MODEL A, product length (max.): 4,050 mm, number of axes: 8, This 8-axis DOOSAN PUMA TT2500SY was manufactured in 2008. It features a maximum turning diameter of 390 mm on the upper turret and 300 mm on the lower turret, with a maximum turning length of 350 mm. The machine includes a robust tool turret with 24 stations and a rapid traverse speed of 20 m/min for X1 and X2 axes. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA TT2500SY multi-spindle turning machine. Contact us for further details. • Number of axes: 8 (X1, X2, Z1, Z2, Y, B, C1, C2) • Swing over bed: 800 mm • Swing over saddle: 620 mm • Max. turning diameter: Upper turret 390 mm; Lower turret 300 mm • Recommended turning diameter: 255 mm • Max. turning length: 350 mm • Main/left spindle motor power (30 min / cont): 26 / 22 kW • Main/left spindle nose: ASA A2-8 • Right/sub spindle max. speed: 3500 rpm • Right/sub spindle motor power (30 min / cont): 26 / 22 kW • Right/sub spindle nose: ASA A2-8 • C-axis indexing (C1 & C2): 360° in 0.001° increments • Upper turret travel (X1/Z1/Y): 255 / 800 / 120 mm (±60 mm Y) • Lower turret travel (X2/Z2): 190 / 900 mm • Sub-spindle B-axis travel: 810 mm • Rapid traverse (X1/X2): 20 m/min • Rapid traverse (Z1/Z2/B): 24 m/min • Rapid traverse (Y): 7.5 m/min • Turret stations: 24 total (12 upper + 12 lower) • Tooling type/interface: BMT65P • Indexing time: 0.2 s • Rotary tool spindle speed: 4000 rpm • Rotary tool motor power (15 min / cont): 5.5 / 1.5 kW Redoznwf Depfx Agmscd • Machine electric power supply: 95.77 kVA Additional equipment • Chip conveyor • Various static tool holders • Rotary live tool holders • Chucks on both spindles Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2019, operating hours: 2,100 h, functionality: fully functional, turning length: 3,028 mm, turning diameter over cross slide: 690 mm, turning diameter: 650 mm, spindle bore: 166 mm, DOOSAN PUMA 5100 XLMB CNC LATHE FANUC CONTROL 32i B YEAR 11/2019 , INSTALLED 2020 SWING OVER BED 900 MM SWING OVER SADDLE 690 MM MAX TURNING LENGTH 3028 MAX TURNING DIA 650 MM HYD CHUCK 550 MM DIA X 362 Z 3150 C 360 INDEXING 0.001 12 STATION TURRET BORING BAR 60 MM MAX RPM 1500 Rcedpsznu Dqsfx Agmed BAR CAPPACITY 166.37 MM TAILSTOCK - QUILL 120 DIA - NO 6 MT LIVE TOOLING SWARF CONVEYOR TOOL PRESETTER COOLANT SYSTEM HYD STEADY IS THERE BUT NOT FITTED TO MACHINE FULL LOAD 82 AMPS NETT WEIGHT 13.2 TON

Condition: used, lifting height: 3,410 mm, Year of construction: 2019, operating hours: 2,850 h, Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Digging depth: 4.88 m = Additional options and accessories = - Rubber tracks Rcjdpfsyn En Ujx Agmed

Condition: used, lifting height: 4,650 mm, Year of construction: 2017, operating hours: 7,150 h, Year of manufacture: 2017 Empty weight: 8.500 kg Digging depth: 4.175 m Rcedpfjxqfhljx Agmed = Additional options and accessories = - Rubber tracks

Condition: used, Year of construction: 2008, functionality: fully functional, CNC lathe, 2 axes, Doosan Puma 300B Rcjdpfx Agjzpxi Temod Year 2008 Excellent condition Fanuc 21iTB with manual guide Maximum turning diameter: 400 mm Maximum turning length: 650 mm Z-axis travel: 680 mm Spindle bore: 76 mm Chuck: 250 mm Tailstock Tool probe Parts catcher Included with the machine: Chip conveyor Documentation

Condition: new, Year of construction: 2023, functionality: fully functional, DN Solutions PUMA 5100MB – NEW, UNUSED MACHINE! Year: 2023 Rsdpfxozpw Dpe Agmscd Fanuc Oi-TF 15” control C-axis powered tool 21-inch chuck (535mm) Spindle bore: 166mm 12-position BMT75 turret Max. turning diameter: ø 650 mm Max. turning length: 952 mm Prepared for steady rest support Tailstock Tool probe CROMAR chip conveyor 12 tool holders, including 4 powered tool holders (2/2)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar TOOL MAGAZINE: CHAIN-TYPE ; 32 POS MAX TOOL DIAMETER: 90(150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg Rcedpfx Asq Nqkxsgmod OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Condition: used, Year of construction: 2014, turning diameter 320 mm turning length 510 mm control i Serie Fanuc swing diameter over bed slide 250 mm spindle turning speed - stepless 6000 U/min spindle bore 65 mm power capacity 15 kW total power requirement 20 kW weight of the machine ca. 3.5 t dimensions of the machine ca. 2,59 x 1,6 x 1,7 m Rcsdpfxozl E Rij Agmod Machine has chip conveyor and Tail stock. It has C- axe and live tooling. Control: Fanuc i series

Condition: like new (used), Year of construction: 2020, operating hours: 4,300 h, functionality: fully functional, spindle motor power: 15,000 W, spindle speed (min.): 6,000 rpm, spindle speed (max.): 6,000 rpm, rotational speed (max.): 6,000 rpm, feed length X-axis: 135 mm, feed length Z-axis: 530 mm, bar passage: 51 mm, feed rate X-axis: 30 m/min, feed rate Z-axis: 40 m/min, chuck outer diameter: 152 mm, bar diameter (max.): 51 mm, overall weight: 8,100 kg, Equipment: documentation/manual, We offer this Doosan PUMA TT1300SYB CNC turning and milling center, in like-new condition, manufactured in 2020. Manufacturer: Doosan Model: PUMA TT1300SYB Year of manufacture: 2020 Condition: Like new Category ID: 1128 Type ID: 2239 Machine type: CNC turning and milling center If you have any questions or need further information, please do not hesitate to send us a message or call us. For sale: a nearly new Doosan PUMA TT1300SYYB from February 2020, with an LNS SPRINT 565 S2 automatic bar loader with motorized chucks and only 3,800 cutting hours. This is a high-end, multitasking CNC lathe with a dual spindle and dual motorized turret, featuring an independent Y-axis in both positions. A unique machine in its category, designed for complete machining in a single setup. -Synchronized dual spindle -Dual turret with powered tools -Upper and lower Y-axis (SYYB configuration) -Simultaneous machining of both sides -Drastic reduction in cycle times -High precision and thermal stability -Spindle speed up to 6,000 rpm -Bar capacity up to Ø51 mm -2 Hainbuch tool holders Special price: 165,000 EUR, WORKING HOURS: ONLY 3,800 CUTTING HOURS. Available for inspection and operational testing. Simultaneous machining with two turrets. Rodpfsyryymox Agmscd Automatic transfer between main and sub-spindle. Possibility to finish the complete part in a single operation. Ideal for use with a bar feeder. Significant reduction in cycle times compared to a single-spindle lathe.

Condition: used, fuel type: electric, lifting height: 4,800 mm, Year of construction: 2014, operating hours: 6,320 h, Empty weight: 23.500 kg Carrying capacity: 1.800 kg GVW: 25.300 kg Dimensions (LxBxH): 900 x 299 x 308 cm Track width: 60 cm Digging depth: 10.795 m = Additional options and accessories = Rcsdpozb Nc Nofx Agmed - Central lubrication

Condition: used, color: other, Year of construction: 2018, Number of cylinders: 4 Width: 38 cm Track width: 3,8 cm Quick coupler system: Yes Serial number: DXCCEABAJJ0027370 Brand: DOOSAN Model: DX55-9C Year of manufacture: 2018 Hour meter reading: 3,690 hours Serial number: DXCCEABAJJ0027370 Empty weight in kg: 5,500 kg Transport dimensions (L x W x H) in mm: 5,700 x 2,000 x 2,600 mm Engine make and model: Yanmar 4TNV94L Power: 36.2 kW / 50 pk Cylinders: 4 Track width: 380 mm Bucket width: 650 mm Equipment: Mechanical quick coupler Tooth bucket Hammer lines Dozer blade Tracks with rubber pads No documents Online auction of construction, agricultural, and industrial machinery (including: JOHN DEERE / DEUTZ-FAHR / CASE / NEW HOLLAND tractors, VOLVO / CATERPILLAR / HITACHI / KOMATSU excavators, wheel loaders, and MANITOU skid-steer loaders, aerial work platforms, FORD and MERCEDES-BENZ trucks, portable compressors, power generators, rollers, scissor lifts, various ROLLAND and KUHN agricultural machines, and off-road and workshop equipment, etc.), with most lots located at our own warehouse in Deinze, Belgium. The online auction opens Wednesday 22 July and closes Tuesday 4 August. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Rsdpszpym Tsfx Agmecd Viewing day is on: - Monday 3 August Pickup days are on: - Tuesday 11 August - Tuesday 11 August - Thursday 13 August - Thursday 13 August Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, color: orange, Year of construction: 2021, operating hours: 4,310 h, Equipment: air conditioning, Empty weight: 36.000 kg Rcsdpszb Ndtefx Agmed Dimensions (LxBxH): 1141 x 300 x 364 cm Track width: 60 cm Digging depth: 6.94 m = Additional options and accessories = - Central lubrication

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 3,955 h, load capacity: 2,500 kg, lifting height: 4,750 mm, fuel type: diesel, mast type: triplex, construction height: 2,190 mm, power: 43 kW (58.46 HP), drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Ready for operation and fully functional Rcsdpfozngxmjx Agmjd Technical condition: good Front tire type: Solid rubber Front tire condition: 80 - 100% Rear tire type: Solid rubber Rear tire condition: 60 - 80% Description: DOOSAN D25S-5 diesel forklift - - 2.5 ton lifting capacity - - Year of manufacture 2015 - - Side shifter - - Triplex free-lift mast - - Overall height 2.19 m - Lifting height 4.75 m - - 3955 operating hours according to meter - - 4-cylinder YANMAR diesel engine, 58 hp - - Solid rubber tires, front approx. 90%, rear approx. 80% - - Half cab, lighting system - - Simple and mechanical forklift - - Good condition - - - Delivery possible! Side shifter, 3rd valve, rear work light, front work light, windshield, half cab, CE certificate.

Condition: used, power: 127 kW (172.67 HP), fuel tank capacity: 255 l, color: orange, lifting height: 2,750 mm, Year of construction: 2014, operating hours: 6,540 h, Empty weight: 14.400 kg Rjdsy Takiepfx Agmscd Dimensions (LxBxH): 772 x 264 x 328 cm Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3

Condition: good (used), Year of construction: 2013, Traverses XYZ: 762 x 435 x 510mm, Rcodpfjzhwg Uex Agmed table size 920 x 435mm, ISO40 spindle taper, spindle speed 12000 rpm, FANUC i Control, spindle motor power 15kW, 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor

Condition: good (used), Year of construction: 2011, 850mm Swing, 525mm Max Cutting Diameter, 1310mm max turning length, 10 Station Turret, 102mm bar capacity, Rcodezhwghepfx Agmed 2800rpm 22kW Spindle, Fanuc I series, 3 jaw chuck, Low Volt Light, Tailstock,

Condition: used, Year of construction: 2023, operating hours: 1,773 h, 2023 | Doosan DX225LC-5 | Used Tracked Excavator | 1773 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Rcsdszkuk Nepfx Agmod 💰 Buy Now for EUR 140000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 67 inspection points 67 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine with very few hours, in very good condition, no issues. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40971 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2021, operating hours: 2,348 h, 2021 | Doosan DX225LC-5 | Used Tracked Excavator | 2348 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 120000 or Make an Offer. Rodjzkuakepfx Agmocd Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 67 inspection points 66 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine in very good condition. Few hours and the track is almost new. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41033 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.