Used Doosan Dx140Lc for sale (314)

Condition: reconditioned (used), functionality: fully functional, fuel type: diesel, overall weight: 15,000 kg, chain condition: 90 %, Year of construction: 2019, operating hours: 4,080 h, Equipment: UVV, air conditioning, cabin, gripper hydraulics, hammer hydraulics, hydraulics, onboard computer, rubber tracks, Doosan DX 140LCR-5 with adjustable boom and HS 10 attachment, with 4,080 operating hours, year of manufacture 12/2019. Major service and statutory UVV inspection recently completed. Price and attachments on request. Lrodoww T Aaopfx Aaxsg

Condition: ready for operation (used), Year of construction: 2012, operating hours: 7,599 h, functionality: fully functional, machine/vehicle number: MM0018-000095, turning length: 1,540 mm, turning diameter: 760 mm, spindle bore: 86 mm, travel distance X-axis: 630 mm, travel distance Y-axis: 1,585 mm, TECHNICAL DETAILS Turning diameter: 760 mm Turning length: 1,540 mm Travel X-axis: 630 x 220 mm Travel Z-axis: 1,585 x 1,515 mm Travel Y-axis: 230 mm Chuck diameter: 254 mm Bar capacity: 76 mm Spindle bore: 86 mm Swing over bed: 1,000 mm Spindle speed: 4,000 rpm Spindle nose: A2-8 Milling spindle speed range: 10,000 rpm Tool changer: 80 positions Turret: 12 positions Tool holder: BMT 65 P, Capto milling head Drive power: 26/22 kW MACHINE DETAILS Lredpfx Aajx Updnsxjg Total connected load: 100 kVA Dimensions & Weight Footprint: approx. 6.1 x 2.7 x 3.0 m Machine weight: approx. 15.5 t Operating hours Spindle hours: 7,599 h Run time: 47,684 h Power-on time (control): 85,381 h EQUIPMENT Sub spindle 80-position tool magazine Hydraulically actuated hollow clamping device 12-position lower turret with BMT 65 P Chuck air blow-off system spindle 1 and spindle 2 Automatic central lubrication Contour milling with B-axis incl. 4-axis simultaneous machining Internal coolant supply on sub spindle Automatic tool measuring arm Electronic tool breakage monitoring 2-pressure clamping for main and sub spindle Automatic shutdown after end of production Hinged belt chip conveyor 2 x power chucks 250 mm 1 x radial AGW 1 x axial AGW Measuring probe Extended high-pressure coolant system with paper belt filtration Note: For transportation, two Mega Liner semi-trailers with 3 m loading height will be required.

Condition: excellent (used), Year of construction: 2019, Doosan Puma TT2100SYY Mfd. 2019 Tooled as pictured Specifications SWING OVER BED 9.05" MAX CUTTING DIAMETER 9.05" DISTANCE BETWEEN CENTERS 38.5" X-AXIS TRAVEL 6.5" Y-AXIS Yes Y-AXIS TRAVEL 3.93" Z-AXIS TRAVEL 27.5" C-AXIS INDEXING FULL CONTOURING C-AXIS CHUCK SIZE 8" BAR CAPACITY 2.625" SPINDLE NOSE A2-6 SPINDLE MOTOR 35 hp SPINDLE SPEED 5,000 RPM RAPID TRAVERSE RATE - X-AXIS 1,181 in/min. RAPID TRAVERSE RATE - Z-AXIS 1,575 in/min. SUB SPINDLE Yes SUB SPINDLE - CHUCK SIZE 8" Lrjdsw Dvnxspfx Aaxeg SUB SPINDLE - BAR CAPACITY 2.56" SUB SPINDLE - SPINDLE NOSE A2-6 SUB SPINDLE - SPINDLE MOTOR 25 hp SUB SPINDLE - SPINDLE SPEED 5,000 RPM SUB SPINDLE / W-AXIS TRAVEL 28.7" TURRET CAPACITY 12 TURRET TYPE BMT55 LIVE MILLING Yes LIVE MILLING SPEED 5,000 RPM LIVE MILLING MOTOR 10 hp TURRET 2 CAPACITY 12 TURRET 2 - X-AXIS TRAVEL 6.5" TURRET 2 - Z-AXIS TRAVEL 27.56" Dimensions 93" X 153" (W/CONVEYOR - 186") X 88.6"H Weight 20,940 LBS Equipped With FANUC OiTF CNC CONTROL DOOSAN EZ GUIDE i PROGRAMMING TWIN 12 POSITION TURRETS UPPER AND LOWER, W/24 POSITION INDEXING ON EACH TURRET WITH BASE MOUNT TOOLING SYSTEM Y-AXIS ON BOTH TURRETS (2) INTEGRAL SPINDLES FULL CONTOURING C-AXES ON BOTH SPINDLE MILL/DRILL ON UPPER AND LOWER TURRETS PARTS CATCHER LEFT AND RIGHT PROGRAMMABLE PARTS UNLOADER PARTS CONVEYOR BAR FEED INTERFACE 8" 3-JAW KITAGAWA CHUCK FOR LEFT AND RIGHT SPINDLES (COLLET SYSTEMS IN ON MACHINE NOT INCLUDED IN SALE) (2) X-AXIS LIVE HOLDERS (2) Z-AXIS LIVE HOLDERS STANDARD FACTORY STATIC TOOLING DOOSAN TOOL LOAD MONITORING SYSTEM AIR BLAST SYSTEM FOR CHUCK CLEANING 2 machines available

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m Lrsdpfxsvzln Ro Aaxjg The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available

Condition: excellent (used), Year of construction: 2020, Swing over bed 720mm, Swing over cross-slide 590mm, maximum machining diameter 481mm, maximum machining length 1275mm, bar capacity 102 mm, Lrodpfx Asx Uy Hasaxjg 12 station turret, spindle speed 2,800 rpm, Fanuc I series control, tool setter, swarf conveyor, 3 jaw chuck,

Condition: ready for operation (used), Year of construction: 2015, spindle speed (max.): 3,500 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 830 mm, total height: 2,200 mm, overall weight: 6,450 kg, controller manufacturer: FANUC, controller model: na, number of axes: 5, This 5-axis DOOSAN 2600 SY turn-mill centre was manufactured in 2015. It features a Fanuc CNC, a maximum turning diameter of 375 mm, and lengths up to 760 mm. The machine includes a motorized turret with 24 positions and motorized tools capable of 5,000 rpm. Ideal for complex machining tasks. Consider the opportunity to buy this DOOSAN 2600 SY turn-mill centre. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits Lsdpfx Asyc Iiwsaxerg • Total installed power: 54 kw • Workpiece max turning diameter: 375 mm • Workpiece max turning length: 760 mm • Workpiece max turning diameter from bar: 81 mm • Power of motorized tools: 5. 5 kw • Speed of motorized tools: 5000 rpm Extra Information Tools 1 self-centering chuck, diameter 250 mm 2 axial live tool holders 2 radial live tool holders 5 boring bar holders 5 external turning tool holders Dimensions Machine Depth 3600 mm

Condition: used, fuel type: diesel, color: orange, lifting height: 4,050 mm, Year of construction: 2015, operating hours: 6,550 h, Year of manufacture: 2015 Empty weight: 6.000 kg Dimensions (LxBxH): 567 x 198 x 255 cm Lredpfox Hgn Uex Aaxsg Engine type: Yanmar Yanmar 4TNV94L

Condition: excellent (used), Year of construction: 2012, Maximum turning diameter 406mm, Maximum turning length 520mm, bar capacity 65mm, Y axis -/+ 51mm, Spindle speed, 4,500 rpm, Lsdsx T Dhlepfx Aaxjrg sub-spindle speed 4,500 rpm, milling speed 5,000rpm, 12 station turret, 18.5 kw main motor, C axis 0.001degrees, Fanuc I series control, parts catcher, tool setter, swarf conveyor, 3 jaw chucks to main and sub spindles, Iemca magazine barfeed

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 125 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,400 mm, fuel type: gas, mast type: triplex, construction height: 2,145 mm, power: 47 kW (63.90 HP), empty load weight: 4,850 kg, drive type: Treibgas, LPG forklift Load center: 500 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Torque converter Speed class: 20 Condition: Like new Lredpfxsx Aw S Te Aaxsg Technical condition: New Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 60 - 80% Sideshift, 3rd valve, 4th valve, Half-cab,

Condition: used, Year of construction: 2012, Serial number: DWGCWLAPTB101xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20995 Engelsk: Specifications: 2012 model Hours: approx. 11,150 (can increase) 264 kW Weight: 25,500 kg Central grease Tires (see photos) Scale Rear-view camera Extra lights Lredpfewzg Dfox Aaxjg AC/climate control Radio/DAB See video Ready for delivery  Description:2012 Doosan DL 450-3 wheel loader with bucket and scale.The machine is in daily use, so the hour count may increase.See video.Ready for delivery Own weight: 25500 Total Weight: 25500 Model: DL 450-3 hjullaster m/ skuffe og vekt. SE VIDEO

Condition: used, Year of construction: 2007, Multipallet Horizontal CNC Center Doosan HC500, year 2007. 7-pallet pallet system Fanuc 21i-MB control Spindle speed 8000 rpm ISO40 (BT) taper -X850mm -Y700mm -Z750mm 1-degree pallet indexing 60 tools Chip conveyor Through-spindle coolant (IKZ) Ledpjycvpfofx Aaxsrg Machine fully operational, available for inspection in France, 01360 Loyettes.

Condition: used, Year of construction: 2022, operating hours: 2,600 h, Serial number: DXCCEBDPCM002xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18806 Lredpfx Aaox Svmkexeg Specifications: - 2022 model - Hours: approx. 3200 (will increase) - 129.4 kw - Certified - Belt width: 60 cm - Machine width: 300 cm - Undercarriage (see pictures) - Central lubrication - Makin GPS - Digging bucket - Cleaning bucket - Hammer - Rototilt - Service history - AC/climate - App controlled webasto - Radio/Dab - Delivery by agreement Description: 2022 Doosan excavator which is in very good condition. Services have been taken at a brand dealer and are still subject to agreement. Comes with the SMP digging tray that came with the machine. 2022 Engcon rototilt and Makin GPS. Can come with a clamp in hardox for NOK 30,000 Delivery by agreement. Hours: 2600 Own weight: 22300 Year controlled: Yes Width: 300 Kw: 129.4 Model: DX225LC-7 gravemaskin m/ graveskuffe, pusseskuffe, hammer og GPS. SE VIDEO

Condition: excellent (used), functionality: fully functional, cutting diameter: 560 mm, DOOSAN PUMA 400 LMB FANUC 21i CONTROL MAX TURNING DIA 560 MM MAX WORKING LENGTH 2000 MM MAX SWING OVER BED 770 MM SWING OVER SADLE 590 MM X Z AND C AXIS - 360 DEGREES 0.001 DEGREES HYD CHUCK 380 MM DIA HYD STEADY ( SMW BLOCK ) SPINDLE BORE 132 MM 12 STATION TURRET SWARF CONVEYOR QUILL DIA 120 MM MORSE TAPER 6 QUILL TRAVEL 120 MM POWER REQUIREMENTS 60 KVA FLOOR SPACE 4220 X 2180 MM WEIGHT 10 TON Lrjdpfeyciq Asx Aaxsg

Condition: used, Year of construction: 2018, operating hours: 7,450 h, Serial number: DHKCEWBSVH500xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20213 Specifications: - 2018 model - 8000 Hours (will increase slightly) - 17,700 kg - 102.1 kW - Articulated boom - Blade - Central lubrication - G60 HK-mount - Stage 5 engine - 4 new rear tires - K80 trailer with electric hydraulics - Engcon ec219 rototilt - 650 l Gjerstad sanding bucket (new knife) - Tool cabinet - Wheel guards Lodpfx Aowdvg Ieaxjrg - Support legs - Blade - Lights - Air conditioning/ac - Radio - Ready to deliver Description: We have a 2018 Doosan DX165W-5 wheeled machine w/ K80 trailer hitch with electric and hydraulics, articulated boom, Engcon ec219 rototilt, Gjerstad sanding bucket for sale.u The machine is well maintained and cared for by the owner. It will be serviced again before sale. Ready for delivery Hours: 7450 Own weight: 17700 Total Weight: 17700 Kw: 102,1 Model: DX165W-5 hjulmaskin m/ K80 hengerfeste med elektrisk og hydraulisk opplegg, knekkbom ,Engcon ec219 rototilt, Gjerstad pusseskuffe. SE VIDEO

Condition: used, Year of construction: 2017, operating hours: 5,019 h, Serial number: dwgceceakh103xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21771 Ljdpfx Ajxvlfhjaxsrg Spesifikasjoner. 2017 modell  Sertifisert til: 10/26  5019 timer  Vekt: 31800 kg  202 kW Maskin bredde: 320 cm  Understell (se bilder)  Beltestyringer  Pusseskuffe  Engcon rototilt ec233  Sentralsmøring  Ekstra hydraulikk  S70 feste  Lys pakke  Klima/ac  Radio  Leveringsklar    Beskrivelse:  Vi har en 2017 Doosan Dx300lc-5 Gravemaskin m/ rototilt og pusseskuffe for salg.  Det kan følge med Makin 3D gps om ønskelig mot et tillegg i prisen.  Maskinen har gått på serviceavtale og har full servicehistorikk. Alt skal fungere som det skal ifølge eier.  Leveringsklar  Hours: 5019 Own weight: 31800 Year controlled: Yes Year controlled until: 10/26 Width: 320 Kw: 202 Model: Dx300lc-5 Gravemaskin m/ rototilt og pusseskuffe

Condition: used, Year of construction: 2006, turning diameter 320 mm turning length 322 mm control Fanuc D -iT greates pass round over bed 510 mm x-axis 175 mm z-axis 330 mm spindle tunring speed 6.000 U/min spindle drive 15 kW number of tool places 12 Pos. auto power on hours ca. 43.947 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor Lodpfsya Ih Iox Aaxjrg - Manual tailstock - Tool setter arm - Parts catcher with collection box Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2020, operating hours: 7,800 h, CE mark: yes Please contact ATS Norway for more information Please provide reference number upon request: 21289   Specifications: • 2020 model• 7800 hours• S70 quick coupler• Width: 349 cm• KW: 202• Weight: 29,400 kg• Rototilt R8• Grapple• Previously on a gold service contract. Now on a standard service contract• Makin 3D GPS• Includes a 1600-liter grading bucket (bucket in picture not included)• Good undercarriage (see pictures)• Includes spike guard• High and wide undercarriage• Large light package• App-controlled Webasto heater• One operator• Central lubrication on both machine and tilt• Extra hydraulics• 360 camera Ledpexdhxajfx Aaxorg Description: 2020 Doosan 300LC-7 for sale on behalf of customer.The machine appears to be in very good condition and well maintained. Sold with a lot of extra equipment such as R8 Rototilt, grapple, Makin 3D GPS, high and wide undercarriage, large light package, and app-controlled Webasto heater.Ready to go straight to work for the new owner. Hours: 7800 Own weight: 29400 Total Weight: 29400 Width: 349 Kw: 202 CE: Yes Engine hours: 7608 Model: DX-300LC7 - HDHW - GPS -

Condition: used, Year of construction: 2015, operating hours: 7,473 h, Serial number: dhkceaaucf6001xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21920 Specifications: 2015 model 7473 hours 36.2 kW Weight: 6250 kg Machine width: 197 cm Movable boom Chassis (see pictures) Cut Rubber belts Yanmar engine Central lubrication Tiltrotator Sanding bucket Excavator bucket Auxiliary hydraulics Air conditioning/ac Light Radio Ready for delivery Description: We have a 2015 Doosan DX62R-3 excavator with rototilt, sanding bucket and backhoe bucket for sale. The machine works as it should according to the owner and it comes with 2 drawers and a rototilt. The machine is in weekly operation so the number of hours will increase slightly. Ready for delivery Hours: 7473 Own weight: 6250 Kw: 36.2 Lredpfx Aajx Aavzexjg Model: DX62R-3 gravemaskin m/ rototilt, pusseskuffe og graveskuffe

Condition: used, machine/vehicle number: DIN0DA30LH074xxxx, Year of construction: 2017, operating hours: 24,500 h, Please contact ATS Norway for more information Please provide reference number upon request: 21134 Specifications: 2017 model Approx. 6870 hours Approx. 24,500 km Power: 270 kW (375 hp) Tires (see photos) Road registered (white plates) High tailgate Central lubrication Length: 955 cm Width: 299 cm Wheelbase: 411 / 177 cm Curb weight: 24,300 kg Max payload: 27,125 kg 6x6 Reversing camera LED work lights Radio/CD Air conditioning Description: 2017 Doosan DA30 articulated dump truck for sale.Equipped with central lubrication, high tailgate, and reversing camera.Ready for quick delivery. Hours: 24500 Lodpfx Aajw Ruyxsxorg Own weight: 24300 Model: 2017 Doosan DA30 Dumper

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 770 mm, spindle motor power: 18,500 W, controller manufacturer: FANUC, controller model: 31i-MODEL B, number of axes: 9, This 9-axis DOOSAN PUMA TT 1800 SY was manufactured in 2014, offering advanced capabilities for horizontal turning. Ideal for complex machining tasks, this machine ensures precision and efficiency. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA TT 1800 SY machine we have for sale. Contact us for more information. Additional equipment • LNS bar interface • the robot is not included Machine Benefits Qualitative Machine Benefits • Part ejector + internal cooling for sub-spindle • Automatic electric tool measurement • Air conditioning in the electrical cabinet • Lns lamella-type chip conveyor • Auto door for robot application • Absolent air system mounted on the machine • 3 pcs driven tools radially • 4 pieces of m-l21590377d triple holders with v-offset, 2 pieces of m-l21590337e axial external holders, 2 pieces of m-l21590347d double holders (single l/h), 4 pieces of m-l21590367d double holders (external), 6 pieces of m-l21590317 single holders (external), 2 pieces of m-l21590387c single holders (external), and 6 pieces of m-l21590327b internal holders • 3 pcs hard jaws Technical Machine Benefits • Max turning diameter: 230 mm • Max turning length: 230 mm • Bar capacity: 65 mm • C1-c2 axis: 360, x2: 190 mm, z2: 720 mm • 2 x 12 position turrets, all positions driven (24/24 index) • Tool holder: bmt 55 p • Driven tools: 5. 5 kw, max: 5000 rpm • Coolant pump for main turret: 3. 7 kw, 14 mpa, 30 l/min Lrsdjyaqq Ejpfx Aaxjg • Coolant supply via sub-/right spindle • Belt-type oil skimmer, part ejector Extra Information Machine still under power

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 7,058 h, load capacity: 2,500 kg, lifting height: 3,300 mm, fuel type: gas, mast type: telescopic, construction height: 2,180 mm, fork length: 1,200 mm, drive type: Treibgas, LPG Forklift ISO Class: ISO Class 2 = 1,000 - 2,500 kg Ljdeyadd Sepfx Aaxorg Mast type: Telescopic Transmission: Torque converter Condition: Operational and fully functional Technical condition: Good Front tires type: Superelastic Front tires size: 7.00-12 Rear tires type: Superelastic Rear tires size: 6.00-9 Description: In addition to this device, we offer more forklifts and warehouse equipment. All our machines are workshop-inspected and comply with FEM4.004 standards. Please contact us by email or phone. You can also find us at hsr-gabelstapler. We are also happy to purchase your used equipment, even if you do not buy a vehicle from us. Leasing and financing at attractive conditions are available on request. We will gladly provide you with professional and comprehensive advice about our vehicles. Sideshift, 3rd valve, rear work light, front work light, internal mirror, beacon light, single pedal, seat,

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 319 h, load capacity: 3,500 kg, lifting height: 4,200 mm, fuel type: electric, mast type: telescopic, construction height: 2,800 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Telescopic Transmission: Electromechanical Condition: Operational and fully functional Technical condition: Standard Front tires type: Superelastic Front tires size: 23x10-12 Rear tires type: Superelastic Lredpfx Asyadd Esaxog Rear tires size: 18x7-8 Battery voltage: 80V Battery capacity: 775Ah Battery manufacturer: Exide Battery type: PzS Battery year: 2019 Description: In addition to this unit, we offer further forklifts and warehouse equipment. All our machines are fully workshop-inspected and certified according to FEM 4.004. Please contact us via email or phone. You can also find us at hsr-gabelstapler. Of course, we are also interested in purchasing your used equipment, even if you do not buy a vehicle from us. Hire purchase and financing at favorable terms are available upon request. We are happy to offer you professional and comprehensive advice on our vehicles. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, load guard, safety light, interior mirror, revolving beacon, single-pedal control, LED, seat,

Condition: used, Year of construction: 2019, x-travel 900 mm y-travel 550 mm z-travel 500 mm Control FANUC 31i-b tool change unit 30 pos. table-size 1.000 x 500 mm table weight 700 Kg spindle taper HSK - A 63 number of spindle speeds 20.000 U/min/rpm Spindle power 22 Kw Lredpfx Aex Ak E Hoaxjg Working hours 10.816 h Spindle hours 2.352 h Distance between table and spindle 150/690 mm weight of the machine ca. 9 t dimensions of the machine ca. 2.530 x 2.900 x 3.064 m

Condition: ready for operation (used), Year of construction: 2007, overall weight: 12,500 kg, This DOOSAN VT 900 was manufactured in 2007. It's a vertical turning machine featuring a CNC FANUC Oi-TC, a chuck diameter of 630 mm, and a conveyor. Weighing 12500 Kg, it also meets CE standards. Consider the opportunity to buy this DOOSAN VT 900 vertical turning machine. Contact us for more information. Ledpfx Asyalm Ueaxerg Machine Benefits Technical Machine Benefits • Chuck diameter: 630 mm

Condition: ready for operation (used), Year of construction: 2011, spindle speed (max.): 6,000 rpm, travel distance X-axis: 170 mm, travel distance Z-axis: 510 mm, spindle motor power: 15,000 W, total height: 1,675 mm, overall weight: 3,100 kg, controller manufacturer: FANUC, number of axes: 2, This DOOSAN LYNX 200 LM turn-mill centre was manufactured in 2011. It features a swing over bed of 510 mm and a maximum turning diameter of 320 mm. The spindle supports a maximum speed of 6000 rpm, and the machine includes a 12-station turret with live tooling capabilities. Ideal for precision turning and milling operations. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits Lrjdpfx Ajyalivsaxeg • Cutting feed rate: 1 to 5000 mm/min • Swing over bed: 510 mm • Swing over cross slide: 170 mm • Max turning diameter: 320 mm • Max turning length: 510 mm • Bar workpiece capacity: 65 mm • Turning tool size: 25 x 25 mm • Boring bar diameter: Ø40 mm • Live tooling max speed: 5000 rpm Extra Information Machine still under power Dimensions Machine Depth 2410 mm