Used Doosan Crawler Excavator for sale (306)

Condition: used, Year of construction: 2011, machine/vehicle number: DWBHEDGOHB0050330, Power: 88 kW, operating weight: 17,660 kg, with quick coupler system, manufacturer: LEHNHOFF, model: HS21-3, operating hours: approx. 6,720 h Hjdeyf R Dijpfx Afzjh

Condition: excellent (used), power: 210 kW (285.52 HP), Year of construction: 2014, operating hours: 13,949 h, Equipment: air conditioning, Empty weight: 34.980 kg Make of engine: DOOSAN CE mark: yes Technical condition: very good Hjdpfx Asyf Tvuofzsh Visual appearance: very good Delivery terms: EXW Please contact Nedtrax B.V. for more information DOOSAN DX340LC-3 Year: 2014 Reading hours: 13949 h Weight:34980 KG 209.6 kw Mono boom Hydraulic Quick Coupler hammer pipe Central greasing Original paint Cameras Airco/klima CE-MARKED In good condition

Condition: new, fuel type: diesel, color: orange, Year of construction: 2023, operating hours: 8 h, Equipment: air conditioning, Empty weight: 50.800 kg Make of engine: DC13 076A Track width: 60 cm Bucket capacity: 2,72 m³ Emission level: Stage IIIA / Tier III Delivery terms: EXW Transport dimensions (LxWxH): 12,2x3,35x3,8 Production country: KR Hodpfx Asx Scfgofzjh Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information CE marked - No CE Certificate available

Condition: good (used), power: 213 kW (289.60 HP), fuel type: diesel, color: orange, Year of construction: 2018, operating hours: 6,429 h, Equipment: air conditioning, Technical information Track width: 80 cm AdBlue system: Yes Make of engine: DL08P Empty weight: 36.200 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: DWGCECEBEH1020055 Hjdpox Scfaefx Afzjh Other information Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 11,3x3,5x3,4 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: good (used), power: 141 kW (191.71 HP), fuel type: diesel, color: orange, Year of construction: 2016, operating hours: 8,621 h, Technical information Track width: 60 cm AdBlue system: Yes Make of engine: DL06P Empty weight: 25.100 kg Functional CE mark: yes Condition Technical condition: good Hjdpfx Afex R Rztozoh Visual appearance: good Identification Serial number: DHKCEBBWTG0001283 Other information Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 9,6x3x3,6 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: used, color: orange, Year of construction: 2021, operating hours: 3,870 h, Equipment: air conditioning, Year of manufacture: 2021 Empty weight: 36.000 kg Dimensions (LxBxH): 1141 x 300 x 364 cm Hodevpqlkopfx Afzoh Track width: 60 cm Digging depth: 6.94 m

Condition: used, Year of construction: 2017, operating hours: 6,150 h, Year of manufacture: 2017 Empty weight: 23.500 kg Dimensions (LxBxH): 898 x 299 x 308 cm Track width: 60 cm Hodpottzmnjfx Afzsh Digging depth: 10.795 m

Condition: used, fuel type: electric, lifting height: 4,800 mm, Year of construction: 2014, operating hours: 6,240 h, Year of manufacture: 2014 Empty weight: 23.500 kg Carrying capacity: 1.800 kg GVW: 25.300 kg Dimensions (LxBxH): 898 x 299 x 308 cm Hodex Hgrajpfx Afzeh Track width: 60 cm Digging depth: 10.795 m

Condition: used, color: other, Year of construction: 2019, operating hours: 3,096 h, Power internal combustion engine: 2856 HP (2101 kW) GVW: 36.200 kg Make of engine: Doosan CE mark: yes Serial number: DWGCECEBVK1020400 Hodot Uyxajpfx Afzjh Machines for Sale Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly. We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines.

Condition: reconditioned (used), functionality: fully functional, fuel type: diesel, overall weight: 15,000 kg, chain condition: 90 %, Year of construction: 2019, operating hours: 4,080 h, Equipment: UVV, air conditioning, cabin, gripper hydraulics, hammer hydraulics, hydraulics, onboard computer, rubber tracks, Doosan DX 140LCR-5 with adjustable boom and HS 10 attachment, with 4,080 operating hours, year of manufacture 12/2019. Major service and statutory UVV inspection recently completed. Price and attachments on request. Hodpfx Afjww T Aaozjh

Condition: ready for operation (used), functionality: fully functional, overall weight: 34,080 kg, Year of construction: 2006, operating hours: 10,297 h, machine/vehicle number: DHKHECC0K60005283, The machine is ready for operation, after service, with oil and filters replaced. The air conditioning and automatic lubrication system are inoperable. I can also source original Doosan parts directly from Korea at significantly lower prices. Hsdpfsuylrwjx Afzeh

Condition: excellent (used), Year of construction: 2019, Doosan Puma TT2100SYY Mfd. 2019 Tooled as pictured Specifications SWING OVER BED 9.05" MAX CUTTING DIAMETER 9.05" DISTANCE BETWEEN CENTERS 38.5" X-AXIS TRAVEL 6.5" Y-AXIS Yes Y-AXIS TRAVEL 3.93" Z-AXIS TRAVEL 27.5" C-AXIS INDEXING FULL CONTOURING C-AXIS CHUCK SIZE 8" BAR CAPACITY 2.625" SPINDLE NOSE A2-6 SPINDLE MOTOR 35 hp SPINDLE SPEED 5,000 RPM RAPID TRAVERSE RATE - X-AXIS 1,181 in/min. RAPID TRAVERSE RATE - Z-AXIS 1,575 in/min. SUB SPINDLE Yes SUB SPINDLE - CHUCK SIZE 8" SUB SPINDLE - BAR CAPACITY 2.56" SUB SPINDLE - SPINDLE NOSE A2-6 SUB SPINDLE - SPINDLE MOTOR 25 hp SUB SPINDLE - SPINDLE SPEED 5,000 RPM SUB SPINDLE / W-AXIS TRAVEL 28.7" TURRET CAPACITY 12 TURRET TYPE BMT55 LIVE MILLING Yes LIVE MILLING SPEED 5,000 RPM LIVE MILLING MOTOR 10 hp TURRET 2 CAPACITY 12 TURRET 2 - X-AXIS TRAVEL 6.5" TURRET 2 - Z-AXIS TRAVEL 27.56" Dimensions 93" X 153" (W/CONVEYOR - 186") X 88.6"H Weight 20,940 LBS Equipped With FANUC OiTF CNC CONTROL DOOSAN EZ GUIDE i PROGRAMMING TWIN 12 POSITION TURRETS UPPER AND LOWER, W/24 POSITION INDEXING ON EACH TURRET WITH BASE MOUNT TOOLING SYSTEM Y-AXIS ON BOTH TURRETS (2) INTEGRAL SPINDLES FULL CONTOURING C-AXES ON BOTH SPINDLE MILL/DRILL ON UPPER AND LOWER TURRETS PARTS CATCHER LEFT AND RIGHT PROGRAMMABLE PARTS UNLOADER PARTS CONVEYOR BAR FEED INTERFACE Hjdpfjw Dvnxex Afzeh 8" 3-JAW KITAGAWA CHUCK FOR LEFT AND RIGHT SPINDLES (COLLET SYSTEMS IN ON MACHINE NOT INCLUDED IN SALE) (2) X-AXIS LIVE HOLDERS (2) Z-AXIS LIVE HOLDERS STANDARD FACTORY STATIC TOOLING DOOSAN TOOL LOAD MONITORING SYSTEM AIR BLAST SYSTEM FOR CHUCK CLEANING 2 machines available

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm engine output 37 kW weight of the machine ca. 9000 kg Hodpfxovzln Ro Afzsh dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available

Condition: used, Year of construction: 2013, 370mm max. machining diameter, 651mm swing over bed, 461mm swing over cross-slide, 712mm max turned length, 3500rpm spindle, 76mm bar capacity, 12 station turret, 15kW spindle motor, FANUC Oi control, collet chuck , C axis & Milling, Tool presetter, Tailstock, coolant, swarf conveyor, parts catcher. Hsdpfx Afoyffz Nozeh

Condition: used, Year of construction: 2012, operating hours: 6,104 h, 2012 | Doosan DL420 | Used Wheel Loader | 6104 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 53900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 54 inspection points 44 approved ✅ 10 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Very clean hydraulics 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39625 Equippo" is commonly used when looking up more details online. Hodpfeyfxw Dsx Afzjh 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, color: orange, lifting height: 3,410 mm, Year of construction: 2019, operating hours: 3,110 h, Year of manufacture: 2019 Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Hedpfxsxqfb Es Afzsh Digging depth: 4.88 m

Condition: used, Year of construction: 2018, operating hours: 5,156 h, 2018 | Doosan DX235LCR-5 | Used Tracked Excavator | 5156 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 115500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 64 inspection points 58 approved ✅ 3 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Crawler excavator Doosan DX235LCR-5 from 2018. short tail version. the boom measures 5.80m (basic boom 3.10m, adjustable part 2.90m) and the stick 2.40m. floor plate width 600mm. the condition of the machine corresponds to the value of the operating hours. the machine shows wear on pins and bushings corresponding to the age and mileage as well as the purpose of use, as well as signs of use (dents, abrasions, etc.). at the time of the inspection, the machine ran/functioned without any abnormalities. maintained machine. the sprocket/turas should be replaced. the customer has decided to keep the backhoe bucket after the inspection. the illustrated backhoe bucket is therefore NOT included in the sale! 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33296 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Hodpfx Afsyfxv Tszjh 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Fanuc, controller model: Oi-MC, workpiece weight (max.): 800 kg, total height: 2,700 mm, total length: 4,080 mm, total width: 2,400 mm, table width: 510 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 15 bar, spindle motor power: 15,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, Doosan NM510 Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Fanuc Series Oi-MC Condition: Very Good Includes Swarf Conveyor Chiller MCF20 Coolant Filter Autolube 6 x Tool Holders Hsdpfxjv Iq Eze Afzjh Notes Vice and clamping block in photos not included Technical Specifications Table Size: 1200 x 510mm Table Load: 800kg Travel (X-Axis): 1020mm Travel (Y-Axis): 510mm Travel (Z-Axis): 510mm Max Spindle Speed: 12,000rpm Spindle Power: 18.5/15/11kW Spindle Taper: BT 40 Rapid Traverse (X/Y/Z): 36/36/30m/min Tool Storage Capacity: 30 tools Tool Change Time (T-T/C-C): 1.7/3.5sec Machine Dimensions: 4080 x 2400 x 2700mm Machine Weight: 7,000kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 670 mm, feed length Z-axis: 625 mm, nominal power (apparent): 37 kVA, controller manufacturer: Fanuc, controller model: i Series, workpiece weight (max.): 1,000 kg, total height: 2,815 mm, total length: 3,350 mm, total width: 3,760 mm, table width: 650 mm, table length: 1,300 mm, table load: 1,000 kg, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Doosan DNM 650 Vertical Machining Centre – 2011 Fanuc i-Series Control | 12,000 RPM | 4th Axis Ready 2011 Doosan DNM 650 Vertical Machining Centre with Fanuc i-Series control. 12,000 RPM BT40 spindle, rebuilt spindle, 4th axis ready, 30-tool ATC, TSC, chiller & swarf conveyor. Available from Used Machine Tools Ireland. Manufacturer: Doosan Model: DNM 650 Machine Type: 3 Axis Vertical Machining Centre with 4th Axis preparation Year: 2011 Control: Fanuc i Series Condition: Very Good - spindle rebuilt in 2026 Availability: March 2026 We are pleased to offer this 2011 Doosan DNM 650 Vertical Machining Centre, a highly regarded and extremely rigid VMC, ideal for precision subcontract machining, toolmaking, and production environments. This machine is equipped with a Fanuc i-Series control and benefits from a newly rebuilt spindle, ensuring excellent performance, reliability, and long service life. The machine is prepared for a 4th axis with Nikken interface, making it an ideal platform for future rotary or multi-axis work. Key Specifications Manufacturer: Doosan Model: DNM 650 Year: 2011 Control: Fanuc i-Series Spindle Speed: 12,000 RPM Tool Taper: BT 40 X / Y / Z Travels: 1270 / 670 / 625 mm Table Size: 1300 × 650 mm Maximum Table Load: 1000 kg Rapid Traverse Rates: X / Y: 36 m/min Z: 30 m/min ATC: 30 Places Max Tool Diameter: Ø80 mm with adjacent tools / Ø125 mm without Max Tool Length: 300mm Max Tool Weight: 8 kg Machine Dimensions (Approx): 2760 x 3350 x 2815mm Machine Weight (Approx): 8500kg Features & Equipment Newly rebuilt spindle Nikken 4th Axis preparation 30-station Automatic Tool Changer (ATC) 20 bar through-spindle coolant (TSC) Coolant chiller LNS swarf conveyor Hedeyfh Ixepfx Afzjh Data server / networking capability Fully enclosed, heavy-duty construction Please Note No tool holders, vices, or swarf bin included Ideal For Precision engineering CNC subcontract machining Automotive & aerospace components General and high-speed milling applications The Doosan DNM 650 is known for its exceptional rigidity, accuracy, and reliability, making it one of the most popular vertical machining centres in its class. Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 510 mm, feed length X-axis: 1,020 mm, feed length Y-axis: 540 mm, feed length Z-axis: 510 mm, nominal power (apparent): 33 kVA, controller manufacturer: Fanuc, controller model: i Series, workpiece weight (max.): 800 kg, total height: 2,700 mm, total length: 3,750 mm, total width: 2,285 mm, table width: 540 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle motor power: 15,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Doosan DNM 500 Vertical Machining Centre – 2012 Fanuc i-Series Control | 12,000 RPM | BT40 | Spindle Rebuilt 2024 2012 Doosan DNM 500 Vertical Machining Centre with Fanuc i-Series control. 12,000 RPM BT40 spindle (rebuilt 2024), 1200×540 mm table, 30-tool ATC, 20 bar TSC & data server. Available now. Manufacturer: Doosan Model: DNM 500 Machine Type: 3 Axis Machining Centre Control: Fanuc i Series Control Year: 2012 Condition: Very Good - spindle rebuilt in 2024 We are pleased to offer this 2012 Doosan DNM 500 Vertical Machining Centre, a robust and highly accurate CNC milling machine designed for precision engineering, subcontract machining, and production environments. Equipped with a Fanuc i-Series CNC control and a 12,000 RPM BT40 spindle, this machine delivers excellent cutting performance across a wide range of materials. The spindle was professionally rebuilt in 2024, ensuring reliability, accuracy, and long-term service life. Key Specifications Manufacturer: Doosan Model: DNM 500 Year: 2012 Control: Fanuc i-Series CNC Axis Travels X Axis: 1020 mm Y Axis: 540 mm Z Axis: 510 mm Table Table Size: 1200 × 540 mm Hjdpjyfh H Usfx Afzsh Maximum Table Load: 800 kg Spindle Spindle Speed: 12,000 RPM Spindle Taper: BT40 Spindle Motor Power: 15 kW Spindle Condition: Rebuilt in 2024 Toolchanger Automatic Tool Changer: 30 Tool Stations Machine Dimensions & Weight Overall Length: 3750 mm Overall Width: 2284 mm Overall Height: 2703 mm Machine Weight: 6,500 kg Features & Equipment Fanuc i-Series CNC control 30-station Automatic Tool Changer (ATC) 20 bar Through-Spindle Coolant (TSC) Data server / networking capability Fully enclosed, rigid Doosan construction Ideal footprint for busy workshops Please Note No swarf bin included No tool holders included No vices included Ideal Applications Precision CNC milling Subcontract machining Automotive, aerospace & general engineering Small to medium batch production The Doosan DNM 500 is renowned for its rigidity, accuracy, and reliability, making it a proven and popular choice for machine shops seeking dependable CNC performance. Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2006, Doosan Puma 700L Turning Centre with Fanuc Series 21i-TB CNC Control, 600mm Diameter Powered 3 Jaw Chuck, Approx. 3000mm Between Centres, 10 Position Tool Turret, Tailstock, Machine Weight 21500kg. S/No. P60L0377 (2006) Includes Various Tool Holders and Sleeves in Tool Turret and Boxes. Country of Origin: Korea Hodjyfgymepfx Afzoh Location: These lots are located in Dundee, Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2020, Swing over bed 720mm, Swing over cross-slide 590mm, maximum machining diameter 481mm, maximum machining length 1275mm, bar capacity 102 mm, 12 station turret, Hjdpfx Afox Uy Haozsh spindle speed 2,800 rpm, Fanuc I series control, tool setter, swarf conveyor, 3 jaw chuck,

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, turning length: 510 mm, turning diameter: 300 mm, spindle bore: 65 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, Doosan LYNX 2100LYA – CNC Turning Center – 2020– Excellent Condition, Ready to Work! We offer for sale the Doosan LYNX 2100LYA CNC turning center, a high-performance machine for precise machining of rotational parts such as shafts, cones, spheres, and internal/external threads. The machine is in excellent technical condition, available immediately and ready for inspection. Key Features: High precision and reliability for both series and single-part production Large turret with 24 tools (including driven tools) Hedpoyftfisfx Afzsh Control system: Siemens Sinumerik 828D Powerful spindle and driven tools for high productivity Spindle bore 61 mm allows machining of various workpieces Technical Data: Max. turning length: 510 mm Max. turning diameter: 300 mm Clearance over bed: 600 mm Clearance over carriage: 400 mm Spindle bore: 61 mm Max. bar diameter: 51 mm Max. spindle speed: 6000 rpm Number of turret tools: 24 (driven tools included) Control system: SIEMENS Sinmerik 828D Year of manufacture: 2020 Dimensions (L x W x H): 2805 x 1582 x 1693 mm Weight: 3500 kg The machine is ready for immediate operation, connected to power, and available for inspection.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, turning length: 510 mm, turning diameter: 300 mm, spindle bore: 61 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, Doosan LYNX 2100LMA – CNC Turning Center – 2019 – Excellent Condition, Ready to Work! We offer for sale the Doosan LYNX 2100LM CNC turning center, a high-performance machine for precise machining of rotational parts such as shafts, cones, spheres, and internal/external threads. The machine is in excellent technical condition, available immediately and ready for inspection. Key Features: High precision and reliability for both series and single-part production Large turret with 24 tools (including driven tools) Control system: SIEMENS Sinumerik 828D Powerful spindle and driven tools for high productivity Spindle bore 61 mm allows machining of various workpieces Technical Data: Max. turning length: 510 mm Max. turning diameter: 300 mm Clearance over bed: 600 mm Clearance over carriage: 400 mm Spindle bore: 61 mm Max. bar diameter: 51 mm Max. spindle speed: 6000 rpm Number of turret tools: 24 (driven tools included) Control system: SIEMENS Sinmerik 828D Hedpfsyftatex Afzeh Year of manufacture: 2019 Dimensions (L x W x H): 2805 x 1582 x 1693 mm Weight: 3500 kg The machine is ready for immediate operation, connected to power, and available for inspection.

Condition: ready for operation (used), Year of construction: 2015, spindle speed (max.): 3,500 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 830 mm, total height: 2,200 mm, overall weight: 6,450 kg, controller manufacturer: FANUC, controller model: na, number of axes: 5, This 5-axis DOOSAN 2600 SY turn-mill centre was manufactured in 2015. It features a Fanuc CNC, a maximum turning diameter of 375 mm, and lengths up to 760 mm. The machine includes a motorized turret with 24 positions and motorized tools capable of 5,000 rpm. Ideal for complex machining tasks. Consider the opportunity to buy this DOOSAN 2600 SY turn-mill centre. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Total installed power: 54 kw • Workpiece max turning diameter: 375 mm • Workpiece max turning length: 760 mm • Workpiece max turning diameter from bar: 81 mm Hjdpfxjyc Iiwe Afzeh • Power of motorized tools: 5. 5 kw • Speed of motorized tools: 5000 rpm Extra Information Tools 1 self-centering chuck, diameter 250 mm 2 axial live tool holders 2 radial live tool holders 5 boring bar holders 5 external turning tool holders Dimensions Machine Depth 3600 mm