Used Doosan Dx255Nlc for sale (276)

Condition: used, Year of construction: 2012, operating hours: 30,973 h, functionality: fully functional, machine/vehicle number: MM0018-000103, turning length: 1,540 mm, turning diameter: 630 mm, spindle motor power: 22,000 W, spindle speed (min.): 1 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 86 mm, travel distance X-axis: 630 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,585 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 40 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 1 rpm, type of input current: three-phase, feed length X-axis: 630 mm, feed length Y-axis: 230 mm, feed length Z-axis: 1,585 mm, bar passage: 66 mm, total height: 2,900 mm, total length: 5,300 mm, chuck outer diameter: 254 mm, total width: 2,750 mm, bar diameter (max.): 76 mm, spindle nose: A2-8, swing diameter over bed slide: 750 mm, overall weight: 15,600 kg, spindle diameter: 254 mm, Equipment: documentation/manual, Additionally included in the scope of delivery: Revolver holder Fgedpfe Air D Tjx Actoi 1 x AGW 90° angled BMT65 Eppinger Preciflex 1 x AGW BMT65 Eppinger Preciflex 3 x Drill chuck holder Ø40 BMT65 1 x Axial square shank holder 32x32 BMT65 2 x Radial square shank holder 32x32 BMT65 1 x Facing holder, square shank 32x32 BMT65

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: MV0083-000047, overall weight: 5,500 kg, DOOSAN DNM 200/5AX – CNC 5-axis machining center – Year of manufacture 2015 For sale is a well-maintained DOOSAN CNC machining center, model DNM 200/5AX, in very good condition. Technical data: Year of manufacture: September 2015 Travel distances X / Y / Z: 400 / 435 / 500 mm Spindle speed: up to 12,000 rpm Spindle power: 18.5 / 11 kW Rotary table diameter: 200 mm A-axis: +30° to −120° Fjdpfx Ace Ahkdqotsgi C-axis: 360° Rapid traverse rate X / Y / Z: 36 / 36 / 30 m/min Machine weight: 5,500 kg Connection: 380 V, 50/60 Hz

Condition: like new (used), Year of construction: 2017, operating hours: 2,450 h, functionality: fully functional, Machine with 4+1 axis operation CNC FANUC Like new condition, with only 5,000 operating hours and 2,450 spindle hours Spindle DIN 12,000 rpm with coolant system Chip conveyor 60-position tool changer High-pressure coolant through the spindle RENISHAW TS-27 tool presetter Fodpfxe Ah T Nno Actjgi Roof with motorized top opening for crane loading Overhead table, 700mm diameter, with threaded holes for fixture positioning (removable)

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: ML0271-000198, spindle speed (max.): 6,000 rpm, spindle motor power: 15 W, total height: 1,600 mm, total length: 2,325 mm, total width: 1,600 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, type of input current: three-phase, bar passage: 65 mm, Equipment: documentation/manual, We are offering for sale a DOOSAN LYNX 220LSYC CNC turning center with a tailstock, manufactured in 2015, in good condition. It operated for 2 years in medium-volume series production and has since been used for smaller series and custom parts. Fsdpfxey Uwgqo Actjgi The machine is equipped with a chip conveyor, tool probe, chuck with collet chuck, and a 3-jaw hydraulic chuck. It also has powered tool holders (3 pcs). Other features include: workpiece ejector, workpiece catching and removal system, tool load monitoring, oil separator for extended coolant life, high-rigidity cast iron machine bed, and a turret with 12 tool positions (24 positions total). Weight: 2900 kg. The machine is sold with 12 tool holders. Net price. If you have any questions or need further information, please send us a message. The bar feeder shown in the pictures can be purchased separately (see our other listing).

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, feed rate X-axis: 45,000 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC530, spindle speed (max.): 12,000 rpm, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Specifications Fsdj Ah S Etepfx Actegi Chip conveyor and set of tool holder. With hydraulic clamp with control unit. Table dimensions: 1200x540 mm Capacity Longitudinal X-travel: 1270 mm Cross Y-travel: 670 mm Vertical Z-travel: 625 mm Spindle Spindle nose: SK40 ISO Spindle speed: 12000 giri/min. Motor power: 18,5 Kw Rapid X,Y,Z axis: 45000 mm/min Tool Stations: 30 nr.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, We are offering a complete, integrated robotic CNC turning cell consisting of two DOOSAN vertical CNC turning centers and one KAWASAKI ZX-165U industrial robot. The machines and robot are exceptionally well preserved, regularly maintained and currently operating in our production facility in a two-shift environment. The robotic cell enables automated workpiece handling, loading and unloading between the CNC machines. This is an opportunity to acquire an existing production automation system rather than sourcing individual machines and commissioning a new integration. 1. Complete cell – Included equipment • 1 × DOOSAN VT450TM-2SP CNC turning center • 1 × DOOSAN VT750TM-2SP CNC turning center • 1 × KAWASAKI ZX-165U industrial robot and robot control cabinet • Installed robot gripper / workpiece handling equipment • Safety fencing and protective enclosure • Robot-to-machine communication interfaces • Associated electrical and pneumatic automation components • Workpiece handling / storage stations and chip conveyors Fsdez Rqqqspfx Actogi 2. Condition, inspection and advantages Both CNC machines and the Kawasaki robot are fully operational, regularly maintained and currently used in our manufacturing facility in Slovenia. The complete cell can be inspected under power and demonstrated during production by prior appointment. • Complete, existing robotic CNC turning solution • Two heavy-duty Doosan vertical turning centers with FANUC CNC controls • Driven tools and C-axis on both machines • Automated workpiece handling and reduced manual intervention • Excellent condition; regularly maintained • Live inspection and test run available 3. Typical applications Automated machining of flanges, bearing rings, gear components, housings, brake discs, large rotational components and other medium- to heavy-duty industrial workpieces, including steel and cast-iron parts. 4. Sales information The complete robotic cell is offered for sale as one integrated system. Additional photographs, video and technical information are available upon request. Inspection and test run by appointment

Condition: used, Year of construction: 2006, Control system: Fanuc D-iT. Fjde Ai Eq Topfx Actjgi

Condition: used, Year of construction: 2013, functionality: fully functional, turning diameter: 370 mm, spindle bore: 76 mm, spindle speed (max.): 3,500 rpm, rotational speed (max.): 712 rpm, Equipment: rotational speed infinitely variable, DOOSAN LYNX300M (32,000 euros) - CNC: FANUC - Chuck diameter: 250 mm - Swing over bed: 651 mm - Max. turning diameter: 370 mm - Max. turning length: 712 mm - Spindle bore: 76 mm - Spindle speed: 3,500 rpm - C-axis - Main spindle motor: 15 kW - Rapid traverse rates X/Z: 30/24 m/min - BMT 55 turret: 12 positions - Rotating tool speed: 5,000 rpm - Machine weight: 3.6 t Fode Ady Htopfx Actjgi - Overall dimensions: 3 x 1.8 x 1.7 m

Condition: new, Year of construction: 2014, operating hours: 705 h, functionality: fully functional, turning length: 3,150 mm, turning diameter over cross slide: 590 mm, turning diameter: 770 mm, spindle speed (max.): 3,000 rpm, spindle bore: 102 mm, travel distance X-axis: 362 mm, travel distance Z-axis: 3,150 mm, bar passage: 90 mm, total height: 2,439 mm, total length: 6,978 mm, total width: 2,310 mm, spindle nose: A2-11, overall weight: 12,000 kg, DOOSAN PUMA 400 XLM CNC LATHE (700 hours of use!) TECHNICAL SPECIFICATIONS Brand: Doosan Model: Puma 400 XLM Year: 2014 CNC: Fanuc Swing over bed: 770 mm Swing over carriage: 590 mm Maximum machining length: 3150 mm X-axis: 362 mm Z-axis: 3150 mm C-axis: 0.001° Motorized BMT turret: 12 positions Bar capacity: 90 mm Hydraulic chuck Tool presetter Chip conveyor Smoke extractor Hydraulic steady rest: 50-315 mm PRICE AND FURTHER INFORMATION AVAILABLE UPON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, Fsdpfx Ae Aihw Eoctogi PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, FOLDING MACHINE)

Condition: used, Year of construction: 2012, Doosan Puma TT1800SY Twin Turret Multi Axis CNC Lathe (2012), 230mm Swing, 230mm Max Turned Diameter, 230mm Maximum Turning Length, 12 + 12 Station Turrets, 65mm Bar Capacity, 5000rpm 15KW Main Spindle, Fanuc 31i Control, C Axis to both Spindles, 5000rpm Sub Spindle, +/-50mm Y Axis, Coolant, Swarf Conveyor, Tool Setter, Parts Catcher, Hydrafeed Multifeed Magazine Bar-feed. S/No. ML0177-000555, Machine Weight: 9000kg. Country of Origin: Korea Fedpfx Ao Ah E Nnectegi Location: This lot is located in Leicester, UK. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2004, Year of manufacture: 2007 Control system: FANUC 18-iTB Options: Fsdpfx Acj Ai D Hcjtegi Interface for bar feeder magazine Part catcher for bar turning parts, max. part length 120 mm and ø 65 mm incl. part conveyor belt, located on the right-hand side outside the machine M-function for opening and closing the chuck internal coolant supply to the counter-spindle with ejector hinged band chip conveyor, located on the right-hand side, without chip cart Bar loader: IEMCA

Condition: used, Year of construction: 2013, Doosan DNM650 Vertical Machining Centre (2013), Traverses X Y Z: 1300 x 650 x 510mm, Table 1200 x 540mm, Spindle Speed 12,000rpm, BT40 Spindle Taper, Spindle Motor 17kW, FANUC Oi Control, 30 Station ATC, Low Volt light, Through Spindle Coolant. S/No. MV0011-000877, Machine Weight: 8500kg. Country of Origin: Korea Fjdpfx Aj Ah E S Hectsgi Location: This lot is located in Leicester, UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2005, Control: FANUC 18-iTB Fgsdpfs Ai Eatsx Actji Options: Interface for bar feeder magazine Part catcher for turned parts, max. part length 120 mm and ø 65 mm incl. part conveyor belt, on the right-hand side outside the machine M-function for opening and closing the chuck internal coolant supply to the subspindle with ejector hinged belt chip conveyor, on the right-hand side, without chip cart Bar loader FMB Turbo 5-55

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large Fsdpfx Ao Af U Ezsctsgi removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -ball screw nut cooling -tool breakage detection in magazine -automatic doors -robot interface -4th axis preparation -Hiwin RCV 250 rotary table -HIWIN RTS 250 suport -Hidraulic aggregate 200 bar 2 A+B -4th axis fixture support hydraulic (3x oil, 2x air) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor -mist collector interface

Condition: like new (used), Year of construction: 2022, operating hours: 400 h, functionality: fully functional, turning length: 1,030 mm, turning diameter: 460 mm, spindle bore: 81 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 265 mm, travel distance Z-axis: 1,100 mm, Doosan Puma GT2600LM, 2022. Machine with only 400 operating hours. Excellent condition. Fanuc 0i-F Plus iHMI-Touch control with Manual Guide. Max. turning length: 1030 mm Max. turning diameter: 460 mm Chuck: 250 mm Spindle bore: 81 mm Spindle: ASA A2-8 Max. spindle speed: 3500 rpm Motor: 18.5/22 kW Fgodpfx Ace Aba D Hstei 12-tool turret, BMT 55 Axis travels: -X: 265 mm -Z: 1100 mm -C: +-360° Live tooling Renishaw tool probe Tailstock Part catcher Included with the machine: - Chip conveyor with collection tank - High-pressure pump - Documentation - 4 live tooling holders (2 angular, 2 straight)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: HEIDENHAIN, controller model: TNC-620, workpiece weight (max.): 1,300 kg, total height: 3,100 mm, total length: 4,400 mm, total width: 2,450 mm, table width: 670 mm, table length: 1,600 mm, overall weight: 9,000 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 775 mm, spindle nose: ISO 40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, Used 3-axis vertical machining center with Heidenhain TNC-620 CNC Fgsdpe Afpq Rofx Actoi

Condition: used, Year of construction: 2007, functionality: fully functional, spindle bore: 52 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 15 W, overall weight: 3,500 kg, For sale: DOOSAN LYNX 220MA CNC turning center, year 2007, equipped with driven tools, C-axis, and FMB SL 80 S automatic short-bar feeder. Technical specifications Manufacturer: DOOSAN Infracore Model: LYNX 220MA Year of manufacture: 2007 CNC control: DOOSAN-FANUC Maximum turning diameter: 250 mm Maximum turning length: 290 mm Maximum bar capacity: 51 mm Main spindle speed: 6,000 rpm Main spindle motor: 15 / 11 kW Fjdpfx Acs Aay Ntstegi Chuck size: 6" Turret: 12 stations Driven tools / live tooling: Yes Maximum live tool speed: 6,000 rpm Live tooling motor: 3.7 kW C-axis: Yes Included equipment FMB SL 80 S automatic short-bar feeder Driven-tool turret C-axis for milling and drilling operations Chip conveyor Tool holders visible in the photographs The machine is suitable for automatic bar machining, including turning, drilling, tapping, and milling operations. Location: Slovenia, EU

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: Fanuc, controller model: Fanuc, table width: 670 mm, table length: 1,500 mm, table load: 1,300 kg, spindle speed (min.): 12,000 rpm, number of spindles: 1, Manufacturer: Doosan Model: DNM 6700 Year: 2018 Condition: (Used) Excellent Control: Fanuc Control Accessories: Kitagawa 4th Axis, Renishaw Spindle Probe, Tool Probe, Swarf Conveyor, Mist Extraction Unit & Manuals. LOCATION: COVENTRY, UNITED KINGDOM MACHINE SPECIFICATIONS Control: Fanuc Control Fgsdpfxszwhtks Actsi X Axis Travel: 1300mm Y Axis Travel: 670mm Z Axis Travel: 625mm Max Workpiece Weight: 1300kg Spindle Speed: 12,000rpm Table Size: 1500 x 670mm Tool Change Capacity: 30 ATC Tool Size: BT40

Condition: used, Year of construction: 2007, operating hours: 67,434 h, functionality: fully functional, machine/vehicle number: PT18SY0210, turning length: 300 mm, turning diameter: 230 mm, spindle motor power: 18,500 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 205 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, feed length Z-axis: 350 mm, feed rate Z-axis: 30 m/min, chuck outer diameter: 250 mm, bar diameter (max.): 65 mm, overall weight: 8,800 kg, We are offering a high-performance and reliable Doosan TT1800SY CNC turning center, ideal for demanding serial production as well as complex precision machining. Key Features: Dual spindle (main + sub spindle) Y-axis for off-center and complex machining Twin turret system (upper + lower turret) Live tooling capability Full spindle synchronization (simultaneous machining) High productivity with reduced cycle times Technical Specifications: Max. turning diameter: approx. 230 mm Max. turning length: approx. 300 mm Bar capacity: approx. 65 mm Spindle speed (main/sub): up to 5,000 rpm Spindle motor power: ~18.5 kW Y-axis travel: ±50 mm X/Z axis travels: approx. 205 mm / 350 mm Rapid traverse rates: up to 30 m/min Turrets: 2 × 12 stations Live tooling speed: up to 6,000 rpm Fgsdpfx Acsy D Rypetoi Tool holders: BMT55 Control system: FANUC 18iTB C-axis: both spindles

Condition: used, Year of construction: 2018, functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 630 mm, turning diameter: 376 mm, spindle motor power: 33,000 W, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 53 mm, travel distance Z-axis: 830 mm, bar passage: 81 mm, controller manufacturer: Siemens, controller model: 828D, number of tool stations in tool turret 1: 24, number of driven tool stations in tool turret 1: 12, CNC turning machine with counter spindle, driven tools, and Y-axis. • Max. turning diameter over bed: 780 mm • Max. turning diameter over slide: 630 mm • Max. turning length: 760 mm • Torque of the main spindle: 719 Nm Fgodo Ad U Uxjpfx Actsi • Spindle mounting (main spindle): a2 #8 • Speed of the counter spindle: 6000 rpm • Power of the counter spindle (30 min): 18.2 kW • Torque of the counter spindle: 220 Nm • Spindle mounting (sub): a2 #5 • Number of stations: 24 (12 driven) Additional equipment: • Renishaw Equator • Rotary turret magazine • Portal robot • Portal loader (Mekiload) Machine can be inspected while powered on. Portal loader can also be sold separately.

Condition: ready for operation (used), Year of construction: 2012, overall weight: 3,500 kg, bar diameter (max.): 32 mm, controller manufacturer: FANUC, controller model: Series 31i-MODEL A, number of axes: 7, This 7-axis DOOSAN Puma ST32G was manufactured in 2012. It features a maximum machining diameter of 32 mm and includes a main spindle with a Z1/C1 axis. The machine is equipped with 6 turning tools and 4 driven cross-machining tools, providing versatile capabilities. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma ST32G swiss type turning machine we have for sale. Contact us for further details. Fjdpfx Aj Ahzbdoctjgi - Completely overhauled in 2022- Maximum Machining Diameter: 32 mm- Number of Axes: 7 (X1, Z1, C1, Y, X2, Z2, C2)- Main Spindle (Front Side): 1, Z1 / C1 Axis- Turning Tools (Front Side): 6 pieces (12 x 12 x 120)- Cross-Machining Tools (Front Side): 4 pieces (ER16) driven- Tool Holders (Front Side): 4 pieces (ER16M) driven- Sub-Spindle (Rear Side): 1 piece, X2 / Z2 / C2 Axis- Rear Tool Holder: 2 fixed tools and 2 driven tools- Deep-Hole Drilling: 2 tools- CNC Control Unit: FANUC Series 31i-MODEL A- Power Supply: AC 200/220V, 3 Phase, PE, 50/60 Hz- Rated Power: 21.04 kW- Interrupting Current: 5.0 kA- Full Load Current: 33.18 A- Short Circuit Current: 10.0 kA- Circuit Diagram Version: ST20H31AA09- Machine Weight: 3,500 kg- Optional Equipment:Profluid High-Pressure Coolant System (Model: PFMF-7015-S4)Bar feeder FMB Turbo 3-36 (Bar capacity: 3–26 mm / nominal 3–36 mm, Bar length: 3,200 mm) (2012) Technical Specification Counter Spindle Yes

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: H2017, overall weight: 68 kg, load capacity: 20 kg, arm reach: 1,700 mm, pivoting range: 360 °, type of input current: three-phase, The Doosan H2017 is an advanced collaborative robot (cobot) that combines high performance with maximum safety and precision. With a lifting capacity of up to 20 kg and a reach of 1,700 mm, the H2017 is ideal for heavy and space-intensive tasks in industry, production, and logistics. The robot is equipped with six integrated high-performance torque sensors, which ensure extremely precise motion control and safe operation in collaboration with humans. This technology makes the H2017 particularly suitable for tasks where both strength and sensitivity are crucial – such as palletizing, machine tending, assembly, and handling of heavy items. Benefits of the Doosan H2017: ✅ High payload of 20 kg – perfect for heavy lifting ✅ Long reach (1,700 mm) – increased flexibility and coverage ✅ Six torque sensors – precise, stable, and safe collaboration ✅ Intuitive programming – quick implementation and startup ✅ Advanced safety features – meets international standards ✅ Robust and reliable design – suitable for industrial environments Ideal for: Palletizing and depalletizing Machine tending Assembly and joining Internal logistics and material handling Fedjz Sxc Rjpfx Actjgi Automation of manual and ergonomically demanding tasks With the Doosan H2017, you get a future-proof cobot that increases productivity, reduces the strain on employees, and delivers consistently high quality – every time. Availability: We have some almost new Doosan H2017 units for sale – still in their original packaging.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, controller manufacturer: FANUC, controller model: i Series + Easy Operation Package, total height: 2,950 mm, total length: 2,160 mm, total width: 2,615 mm, table width: 450 mm, table length: 1,000 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (min.): 0 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 5,025 h, coolant supply: 20 bar, spindle motor power: 18,500 W, spindle nose: SK40 (DIN69871), number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, We acquired this machine in working condition directly from the first owner, after it had completed its production cycle. The Doosan DNM 4500 from 2016, equipped with a FANUC control system, is a reliable 3-axis vertical CNC machining center. It is particularly suitable for general milling operations, working with steel/stainless steel/aluminum, and for series production. The machine will be fitted with 2 new original windows (currently on order)! Additional options & accessories: - Internal cooling (20 bar) - Electronic handwheel Fjdezzdh Ejpfx Actegi - DOOSAN Easy Operation Package - Chip conveyor - HAIMER 3D probe - AOF mist extraction system - Oil skimmer - Preparation for a 4th axis - All original documentation.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,400 h, spindle bore: 81 mm, DN Solutions PUMA 2600YII, year 2022 Fanuc i series Plus Axis travels: Z-830mm X-260mm Y-105mm B-830mm Max. Turning diameter: 376 mm Max. Turning length: 760 mm Standard chuck size: 10 inches Diameter when working with bar stock: 81mm Max. Spindle speed: 4000 rpm Max. Spindle power: 22 kW Built-in spindle (electric spindle) BMT65 turret with 24 positions C-axis driven tools Tailstock Tool probe Chip conveyor Prepared for bar feeder 4 driven tool holders (2 angled, 2 straight) 8 standard tool holders Chip conveyor with tray and pump Documentation Fgsdpfx Ace Ahxl Retji Specification – PDF file

Condition: ready for operation (used), Year of construction: 2000, overall weight: 12,500 kg, Vertical, heavy-duty CNC turning machine with Fanuc control; 630 power chuck; Fodj Aggdhspfx Actegi 850 mm turning diameter; no driven tools; good condition; chip conveyor; various tool holders; machine manuals and documentation; without coolant tank and pumps – can be retrofitted if required; ideal for dry machining.