Used Doosan Dx18 for sale (308)

Condition: used, Year of construction: 2011, machine/vehicle number: DWBHEDGOHB0050330, Power: 88 kW, operating weight: 17,660 kg, with quick coupler system, manufacturer: LEHNHOFF, model: HS21-3, operating hours: approx. 6,720 h Kwjdjyf R Dispfx Ahwju

Condition: excellent (used), Year of construction: 2019, Doosan Puma TT2100SYY Mfd. 2019 Tooled as pictured Specifications SWING OVER BED 9.05" MAX CUTTING DIAMETER 9.05" DISTANCE BETWEEN CENTERS 38.5" X-AXIS TRAVEL 6.5" Y-AXIS Yes Y-AXIS TRAVEL 3.93" Z-AXIS TRAVEL 27.5" C-AXIS INDEXING FULL CONTOURING C-AXIS CHUCK SIZE 8" BAR CAPACITY 2.625" SPINDLE NOSE A2-6 SPINDLE MOTOR 35 hp SPINDLE SPEED 5,000 RPM RAPID TRAVERSE RATE - X-AXIS 1,181 in/min. RAPID TRAVERSE RATE - Z-AXIS 1,575 in/min. SUB SPINDLE Yes SUB SPINDLE - CHUCK SIZE 8" SUB SPINDLE - BAR CAPACITY 2.56" SUB SPINDLE - SPINDLE NOSE A2-6 SUB SPINDLE - SPINDLE MOTOR 25 hp SUB SPINDLE - SPINDLE SPEED 5,000 RPM SUB SPINDLE / W-AXIS TRAVEL 28.7" TURRET CAPACITY 12 TURRET TYPE BMT55 LIVE MILLING Yes Kedpfjw Dvnxjx Ahwowu LIVE MILLING SPEED 5,000 RPM LIVE MILLING MOTOR 10 hp TURRET 2 CAPACITY 12 TURRET 2 - X-AXIS TRAVEL 6.5" TURRET 2 - Z-AXIS TRAVEL 27.56" Dimensions 93" X 153" (W/CONVEYOR - 186") X 88.6"H Weight 20,940 LBS Equipped With FANUC OiTF CNC CONTROL DOOSAN EZ GUIDE i PROGRAMMING TWIN 12 POSITION TURRETS UPPER AND LOWER, W/24 POSITION INDEXING ON EACH TURRET WITH BASE MOUNT TOOLING SYSTEM Y-AXIS ON BOTH TURRETS (2) INTEGRAL SPINDLES FULL CONTOURING C-AXES ON BOTH SPINDLE MILL/DRILL ON UPPER AND LOWER TURRETS PARTS CATCHER LEFT AND RIGHT PROGRAMMABLE PARTS UNLOADER PARTS CONVEYOR BAR FEED INTERFACE 8" 3-JAW KITAGAWA CHUCK FOR LEFT AND RIGHT SPINDLES (COLLET SYSTEMS IN ON MACHINE NOT INCLUDED IN SALE) (2) X-AXIS LIVE HOLDERS (2) Z-AXIS LIVE HOLDERS STANDARD FACTORY STATIC TOOLING DOOSAN TOOL LOAD MONITORING SYSTEM AIR BLAST SYSTEM FOR CHUCK CLEANING 2 machines available

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm Kedjvzln Ropfx Ahwewu z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available

Condition: excellent (used), Year of construction: 2022, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Kodpfxsyll Txs Ahwowu Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, 12 station turret, 22KW Motor, Main spindle 4000rpm, sub-spindle 4500rpm, 3 jaw chucks, swarf conveyor, tool setter,

Condition: excellent (used), Year of construction: 2015, Traverses XYZ: 1020 x 540 x 510mm, table size 1200 x 540mm, ISO40 spindle taper, spindle speed 12000 rpm, Siemens 828D Control, Kwsdpfx Aeylbpvohwju spindle motor power 15kW, 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 810 h, load capacity: 2,500 kg, lifting height: 4,710 mm, load center: 500 mm, fuel type: gas, mast type: triplex, motor manufacturer: Mitsubishi, battery voltage: 12 V, fork length: 1,200 mm, overall weight: 4,120 kg, color: orange, Equipment: CE marking, pallet forks, sideshift, Including license plate Ksdoylhnfjpfx Ahwswu

Condition: good (used), Year of construction: 2010, Maximum turning diameter 406mm, Maximum turning length 520mm, bar capacity 65mm, Y axis -/+ 51mm, Spindle speed, 4,500 rpm, sub-spindle speed 4,500 rpm, milling speed 5,000rpm, 12 station turret, Kwedpfx Ahsyizllowsu 18.5 kw main motor, C axis 0.001degrees, Fanuc I series control, parts catcher, tool setter, swarf conveyor, 3 jaw chucks to main and sub spindles, magazine barfeed

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Fanuc control, 12-position turret, Y-axis, tailstock, chip conveyor, Kjdpfx Aheymfd Tjwjwu

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Fanuc control, 12-station BMT turret, Y-axis, tailstock, chip conveyor, Kjdpfxeymfdtj Ahwjwu

Condition: used, power: 41 kW (55.74 HP), color: orange, Year of construction: 2010, operating hours: 4,810 h, Year of manufacture: 2010 Drive: Wheel Empty weight: 5.550 kg Kwedpfew Afrdjx Ahweu Dimensions (LxBxH): 612 x 229 x 286 cm

Condition: used, lifting height: 4,650 mm, Year of construction: 2017, operating hours: 6,890 h, Year of manufacture: 2017 Empty weight: 8.500 kg Digging depth: 4.175 m Kwjdpfjxqfhljx Ahwju

Condition: used, color: orange, Year of construction: 2021, operating hours: 4,010 h, Equipment: air conditioning, Year of manufacture: 2021 Kodpfx Aovpqlkjhwewu Empty weight: 36.000 kg Dimensions (LxBxH): 1141 x 300 x 364 cm Track width: 60 cm Digging depth: 6.94 m

Condition: used, power: 127 kW (172.67 HP), color: orange, lifting height: 2,800 mm, Year of construction: 2017, operating hours: 6,560 h, Year of manufacture: 2017 Number of cylinders: 6 Empty weight: 15.000 kg Carrying capacity: 10.885 kg Kwjdpfexxkf Ssx Ahwsu GVW: 25.885 kg Dimensions (LxBxH): 758 x 274 x 328 cm Engine type: Doosan Doosan DL06 Stage IV

Condition: excellent (used), Year of construction: 2022, CNC Lathe Doosan Puma 700 M II Control: Siemens Sinumeric 828 Year of manufacture: 2022 Kwjdeyk Tdiopfx Ahwju Turning length: 1,600 mm Turning diameter: 900 mm X-axis travel: 470 mm Z-axis travel: 1,650 mm Spindle speed: 3 – 1,500 rpm Tool turret: 12 stations (all driven) Tool holder: BMT 85P Equipment: Self-centering steady rest Chip conveyor Touch setter 3-jaw chuck Programmable tailstock Extraction system Coolant pump 20 bar with cyclone filter Oil mist extractor

Condition: like new (used), Year of construction: 2024, Table size 1630 x 760 mm, table load 1500 kgs, Traverses XYZ 1630 x 762 x 650 mm, rapid feedrates 30m/min, Spindle power 18.5 Kw, spindle speed 12,000rpm, Kwjdpfx Ahsyia Upewsu 30 station ATC, spindle taper BT40, through spindle coolant, swarf conveyor, Fanuc i series control.

Condition: like new (used), Year of construction: 2024, Traverses XYZ: 625 x 450 x 400mm, 500 x 450mm diameter table, max table weight 400kg, maximum workpiece size 550mm dimeter x 450mm high, B axis table tilt +30°, -110°, C axis 360degrees, 18.5kW, 12000rpm, BT40, Kwsdpfoyia T Ssx Ahweu 24 pallets 120 station tool changer, Fanuc I series control, swarf conveyor,

Condition: used, Year of construction: 2011, turning diameter 250 mm turning length 510 mm control Fanuc i Series greates pass round over bed 510 mm swing diameter over slide rest 290 mm x-axis 175 mm z-axis 550 mm spindle tunring speed 6.000 U/min number of tool places 12 Pos. auto power on hours ca. 18.136 h spindle hours ca. 8.822 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: Kedsylcqzspfx Ahwewu - Driven tools - Short bar feeder - Chip conveyor - Collets - 3-jaw chuck, hydraulic Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2011, turning diameter 250 mm turning length 510 mm control Fanuc i Series greates pass round over bed 510 mm swing diameter over slide rest 290 mm x-axis 175 mm z-axis 550 mm spindle tunring speed 6.000 U/min number of tool places 12 Pos. auto power on hours ca. 11.197 h spindle hours ca. 5.359 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Driven tools - Short bar feeder - Chip conveyor - Collets - 3-jaw chuck, hydraulic Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved. Kwedpfxsylcque Ahwsu

Condition: used, Year of construction: 2008, operating hours: 8,341 h, Type of fuel: Diesel Empty weight: 4.810 kg Dimensions (LxBxH): 270 x 125 x 233 cm Lifting capacity: 3.500 kg Lift height: 482 cm Clearance lift height: 170 cm Fork dimensions: 1.190 x 1.070 mm Ksdpfx Ahsykrc Dowswu - Year: 2008 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: QE-00141 - Operating hours: 8341 - Lifting capacity: 3500kg - Lifting height: 4820mm - Overhead clearance: 2335mm - Free lift: 1700mm - Fork length: 1190mm - Maximum fork width: 1070mm - Minimum fork width: 220mm - Number of wheels: 4 Wheels - Options: Work lights, Full cabin, Free-lift - Mast: Triplex - Drive: Diesel - Motor brand: Yanmar - Transport dimensions: 2700mm x 1255mm x 2335mm (l x w x h) - Transport weight [kg]: 4810kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2008, operating hours: 7,706 h, Type of fuel: Diesel Empty weight: 4.460 kg Dimensions (LxBxH): 270 x 122 x 216 cm Lifting capacity: 3.000 kg Lift height: 471 cm Clearance lift height: 145 cm Fork dimensions: 1.470 x 1.050 mm Kjdpjykracefx Ahwewu - Year: 2008 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: QN70261 - Operating hours: 7706 - Lifting capacity: 3000kg - Lifting height: 4710mm - Overhead clearance: 2160mm - Free lift: 1450mm - Fork length: 1470mm - Maximum fork width: 1050mm - Minimum fork width: 250mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Half cabin, Free-lift, Work lights - Mast: Triplex - Drive: Diesel - Motor brand: Yanmar - Transport dimensions: 2700mm x 1228mm x 2160mm (l x w x h) - Transport weight [kg]: 4460kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: ready for operation (used), Year of construction: 2020, operating hours: 11,574 h, travel distance X-axis: 1,525 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 625 mm, total height: 3,235 mm, overall weight: 13,500 kg, product length (max.): 5,000 mm, This 3-axis DOOSAN MYNX 7500 was manufactured in 2020, featuring a Heidenhain TNC 620 control with a TS 460 probe. It has a table size of 1600 mm by 750 mm and a maximum spindle speed of 12,000 rpm. With dimensions of 5000 × 4050 × 3235 mm and a weight of 13,500 kg, consider the opportunity to buy this DOOSAN MYNX 7500 vertical machining centre. Contact us for more information. • Table Length: 1600 mm • Table Width: 750 mm • Spindle Taper: ISO 40 dual contact • Maximum Spindle Speed: 12000 rpm Kwjdpfxox U Dtwe Ahwju Dimensions Machine Depth 4050 mm

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 300 mm, travel distance Z-axis: 3,120 mm, number of axes: 2, Horizontal turning machine manufactured in 2016. This DOOSAN Puma 3100 ULY was designed for precision with a maximum turning length of 3,100 mm and a turning diameter of 420 mm. It features a tool turret with 12 positions and a spindle chuck diameter of 315 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 3100 ULY machine we have for sale. Contact us for further details. Kwodpfx Ahsyk U A Hewsu • Maximum turning length: 3,100 mm • Maximum turning diameter: 420 mm • Maximum bar capacity: 102 mm • Spindle chuck diameter (main spindle): 315 mm • Tool turret: 12 positions • Driven tool power: 7.5 kW • Number of axes: 2 (X, Z) Additional equipment • High pressure system: 10 bar • Automatic presetting: Yes • Chip conveyor: Belt type

Condition: good (used), Year of construction: 2022, functionality: fully functional, Fanuc control, two turrets, turret 1 with Y-axis, spindle bore 65 mm, sub-spindle, Tool-Eye, parts catcher, conveyor belt, short bar loader. Kwjdjylig Nepfx Ahweu

Condition: excellent (used), power: 103 kW (140.04 HP), fuel type: diesel, color: orange, Year of construction: 2023, operating hours: 244 h, Equipment: air conditioning, Drivetrain AdBlue system: Yes Drive: Wheel Make of engine: DL06V Weights Empty weight: 18.500 kg Functional CE mark: yes Condition Technical condition: very good Visual appearance: very good Identification Serial number: DHKCEWCXCP5002429 Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Kwjdpfxeyibdxs Ahwju Tyre brand: Aeolus Emission level: Stage V / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 8,04x2,5x2,85 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: new, power: 116 kW (157.72 HP), fuel type: diesel, color: orange, Year of construction: 2025, operating hours: 10 h, Equipment: air conditioning, Technical information Track width: 60 cm Empty weight: 22.200 kg Make of engine: DL06A Functional Bucket capacity: 0,92 m³ Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Emission level: Stage IIIA / Tier III Kodsyibbkjpfx Ahwowu Delivery terms: EXW Transport dimensions (LxWxH): 9,5x3x3,2 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information CE marked - No CE Certificate available