Used Doosan Dx180Lc for sale (279)

Condition: used, functionality: fully functional, Year of construction: 2015, This machine will be sold by Euro Auctions at an unreserved auction in Dormagen, Germany 24th – 26th June 2026. For more information go online. Cedpfx Ahezcxgtotjgw

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm Cgjdpjvzln Refx Ahtow spindle taper A2-11 number of spindle speeds 2000rpm engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available

Condition: good (used), Year of construction: 2013, Traverses XYZ: 762 x 435 x 510mm, table size 920 x 435mm, ISO40 spindle taper, spindle speed 12000 rpm, FANUC i Control, spindle motor power 15kW, 30 station ATC with side arm, Codpfx Ajzhwg Ujhtogw Through Spindle Coolant, Low Volt Light, Swarf conveyor

Condition: good (used), Year of construction: 2011, 850mm Swing, 525mm Max Cutting Diameter, 1310mm max turning length, 10 Station Turret, 102mm bar capacity, 2800rpm 22kW Spindle, Fanuc I series, Cgodpfszhwghjx Ahtsw 3 jaw chuck, Low Volt Light, Tailstock,

Condition: used, color: orange, Year of construction: 2017, operating hours: 6,110 h, Empty weight: 23.500 kg Track width: 60 cm Cjdjzi Ecaopfx Ahtsgw Digging depth: 10.8 m

Condition: used, Year of construction: 2022, functionality: fully functional, DOOSAN PUMA GT 3100 M – UNUSED, PRE-OWNED MACHINE, PREMIUM TURNING CENTER AT A SPECIAL PRICE A Doosan Puma GT 3100 M, manufactured in 04/2022, which has never been used for production after commissioning by the supplier (02/13/2023). 0 production hours, no workpiece contact, technically and visually in new condition. You receive the standard of a new Doosan machine at the price of a used machine. Origin: Liquidation of a user's operations in the Nuremberg area. Inspection on-site or via video call is possible at any time. KEY FEATURES - 12″ main spindle, high power and high torque, designed for steel and stainless steel machining - Driven tools VDI40/BMT 65P, milling, drilling, and threading from the turret, complete machining in a single setup Cgjdpfx Aezi Da Rshtjw - Programmable tailstock with servo drive (Z2 axis) - SIEMENS SINUMERIK 828D with 15″ touchscreen and ShopTurn workshop programming - Highly rigid 30° inclined bed, FEM-optimized, gray cast iron FACTORY-INSTALLED SPECIAL EQUIPMENT (installed on the machine) - 24-station turret BMT 65, Hirth gear (1 s/position) - Automatic tool measuring arm (tool setter) - Tailstock programmable, hydraulic clamping, mount for rotating center - Auto power-off after program end - Automatic door with servo drive - 3-jaw power chuck Ø 305 mm (12″) with hydraulic collet chuck - 3× Eppinger driven tool holders (drilling/milling head, VDI40/BMT 65) - LNS articulated strip chip conveyor + LNS Turbo HB coolant filtration system - Dormatec ADF oil mist extraction system (filter level 99.97 %, 65 dB) - 20 kVA transformer separately wired - Absolute measuring system on all axes CONDITION Used machine, unused, no operating hours since installation at the first buyer. Sold “as is, where is”, warranty excluded (used machine). On-site or online inspection before placing an order is strongly recommended. OUR SERVICE On-site or online inspection in the Nuremberg area · Transport, installation, and commissioning offered as a separate package · direct German-speaking contact person for spare parts and support · financing possible via leasing/hire-purchase partners · member of the FDM, the trade association of the machine and tool wholesale trade. Optionally expandable: LoadAssistant holder (Fanuc Robot M-710iC/70) for a fully automated loading cell, upon request. Since this is a unique item, subject to prior sale. Call us or write a short message, and we will arrange an inspection appointment as soon as possible.

Condition: good (used), Year of construction: 2013, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1500rpm spindle, 165mm bar capacity, 10 station turret Codswnfzcepfx Ahtsgw 45kW spindle motor, FANUC control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: good (used), Year of construction: 2012, 300mm max cutting diameter, 510mm mm max turned length, 51mm bar capacity, 11kW motor, Spindle speed 6,000 rpm, milling speed 6,000 rpm, Csdpfxozg Eb Do Ahtsgw sub-spindle speed 6,000rpm, C axis 0.001 degrees, Fanuc oi-Series Control, 3 Jaw Chuck, Tool setter, 12 Station turret, parts catcher, parts conveyor

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 146 h, load capacity: 2,000 kg, lifting height: 4,500 mm, free lift: 1,210 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Electromechanical Condition: Like new Technical condition: very good Front tire type: Superelastic Front tire size: 6.50-10 Rear tire type: Superelastic Rear tire size: 5.00-8 Battery voltage: 48V Cjdpfstl Hzdex Ahtjgw Battery capacity: 500Ah Battery manufacturer: GNB Battery year of manufacture: 2023 Side shifter, 3rd valve, 4th valve, rear work light, front work light, overhead guard, windshield, load guard, full free lift, safety light, multi-directional control lever, single-pedal operation.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 19,865 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: FANUC, controller model: Series 31i-model B, total height: 3,422 mm, total width: 7,297 mm, table load: 1,500 kg, overall weight: 18,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 40, tool weight: 30,000 g, product length (max.): 3,780 mm, number of axes: 4, This 4-axis DOOSAN NHP6300 was manufactured in 2014. It features an impressive X-axis travel of 1,050 mm, Y-axis travel of 900 mm, and Z-axis travel of 1,000 mm. The machine includes a maximum pallet load of 1,500 kg and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DOOSAN NHP6300 horizontal machining centre we have for sale. Contact us for further details. Cedpfezh Hpfsx Ahtjgw • Distance from top of pallet to spindle center: 100–1,100 mm • Distance from pallet center to spindle nose: 75–975 mm • Pallet • Type: Indexing (rotary) • Indexing angle: 1° • Size: 630 × 630 mm • Maximum load: 1,500 kg • Mounting pattern: 24 × M16 × P2.0 {5–18H8} • Maximum workpiece size (Ø × H): Ø1,050 × 1,350 mm • Spindle • Speed: 10,000 rpm (options: 6,000 / 15,000 rpm) • Taper: ISO 50 (7/24 taper) • Maximum torque: 489 Nm (options: 599.8 / 350 Nm) • Feed rates • Rapid traverse (X/Y/Z): 60 / 60 / 60 m/min • Maximum cutting feed: 30,000 mm/min • Automatic Pallet Changer (APC) • Number of pallets: 2 • Type: Rotary shuttle • Change time: 12 s • Drive: Servo motor • Automatic Tool Changer (ATC) • Tool interface: BT / CT / DIN (HSK optional) • Magazine type: Chain • Standard capacity: 40 tools (options: 60 / 90 / 120 / 150) • Matrix magazine capacity: 196 / 256 / 316 / 376 tools • Maximum tool diameter: Ø130 mm (Ø125 mm per note) • Maximum tool diameter with adjacent pockets empty: Ø320 mm • Maximum tool length: 630 mm (HSK: 700 mm) • Tool-to-tool change time: 2.0 / 3.5 s • Chip-to-chip change time: 5.0 / 6.5 s • Motor power and utilities • Spindle motor: 25 / 30 kW (options: 22 / 30, 50 / 55 kW) • Compressed air supply: 0.54 MPa • Tank capacities • Coolant: 925 l • Lubrication: 7.2 l Additional equipment • Fastems automation system Technical Specification Taper Size ISO 50

Condition: excellent (used), Year of construction: 2022, operating hours: 4,605 h, functionality: fully functional, Controller: FANUC 31i-B5 Max. turning diameter: ø540 mm Max. turning length: 1.020 mm Spindle bore / bar capacity: ø76 / 65 mm Y-axis travel: 170 mm (±85) Milling spindle: 12.000 rpm, 18.5 kW Tool magazine (ATC): 80 stations, Capto C6 Tool change time: 2.0 s Counter spindle: 5.000 rpm, 22 kW Spindle power: 22 / 18.5 kW (S1/S6) Cjdpfx Aozilupjhtjgw

Condition: good (used), Year of construction: 2007, Parts shown by hand not come. Technical details are shown on picture. Cgsdpfjzibgzex Ahtjw

Condition: used, color: orange, lifting height: 3,410 mm, Year of construction: 2019, operating hours: 3,630 h, Year of manufacture: 2019 Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Cgodpfx Asxqfb Eehtew Digging depth: 4.88 m = Additional options and accessories = - Rubber tracks

Condition: used, fuel type: diesel, color: orange, lifting height: 4,050 mm, Year of construction: 2015, operating hours: 6,800 h, Year of manufacture: 2015 Field of application: Construction Cgodpfsx Hgn Uox Ahtow Empty weight: 6.000 kg Dimensions (LxBxH): 567 x 198 x 255 cm Engine type: Yanmar Yanmar 4TNV94L

Condition: used, Year of construction: 2012, New mill spindle 2026 Turning diameter: 760 mm Turning length: 1540 mm Control: FANUC Chuck diameter: 254 mm Bar capacity: 76 mm Spindle bore: 86 mm Swing over bed: 1000 mm X-axis travel: 630 x 220 mm Z-axis travel: 1585 x 1515 mm Y-axis travel: 230 mm Spindle speed: 4,000 rpm Spindle nose: A2-8 Milling spindle speed range: 12,000 rpm Tool changer: 40 positions Cgedpjzg N Diefx Ahtew Turret: 12 stations Tool holder: BMT 65 P, Capto Drive power: 26/22 kW Total power requirement: 100 kVA Machine weight: approx. 15.5 t Space required: approx. 6.1 x 2.7 x 3.0 m Options: High pressure coolant 60 bar Auto door & Safety Edge Auto tool setter Coolant blast for chuck jaw cleaning Coolant gun Dual chuck pressure LNS Bar feed interface Prep. for special steady rest lower turret Thru-coolant for Main and Sub spindle Tool load monotoring function Profibus 3 color patrol lamp Renishaw RMP60 INCL. high speed SKIp Function

Condition: used, Year of construction: 2020, Lathes Travel distance X: 293 mm Travel distance Y :130 mm Travel distance Z: 1350 mm turning length: 1285 mm max. turning diameter: 850 mm max. circulation diameter: 420 mm spindle boring: 102 mm input Power: 26 kW max. turning moment: 1123 NM range of revolutions till: 2800 rpm Cgjdeyrfl Uopfx Ahtew Control: Fanuc I-series powered tools control Fanuc The machine offers a maximum turning length of 1,285 mm, a maximum turning diameter of 420 mm, and a maximum swing over bed of 850 mm. The main spindle provides a spindle bore of 102 mm and a speed range up to 2,800 rpm, delivering high torque and stable machining performance. Equipped with a 12-station turret, driven tools, and a FANUC i-Series control, the machine is well suited for complex turning and milling operations in modern production environments.

Condition: excellent (used), With C-axis Csdpfx Aozhmnbjhtegw With driven tools FANUC 21i TB Manual Guide control Turning diameter max 355 mm Turning length -1330 mm Spindle speeds -2'800 rpm Top turret tool holders 12 driven positions Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 2005, functionality: fully functional, Very well-maintained machine, regularly serviced and in good condition. Cgjdpfezh Rhfex Ahtow - Includes a large number of tool holders, both live tooling and static tooling. - Bar feeder included. - Gantry loader included. - One additional newly refurbished spindle included. - 80-position tool magazine with Capto C6 tooling. The machine can be inspected under power and in production until 17 July.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 210 h, load capacity: 16,000 kg, lifting height: 4,500 mm, free lift: 1,470 mm, mast type: triplex, construction height: 3,035 mm, fork length: 2,400 mm, empty load weight: 26,850 kg, total length: 5,600 mm, construction width: 2,540 mm, Diesel forklift Load center: 1200 Mast type: Triplex Technical condition: very good Cgedpjzf Sfyjfx Ahtew Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Description: Very good, like-new condition. The unit will receive a new inspection and a new certification according to UVV (German regulations for occupational safety and health). Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, roof protection, windshield, heater, air conditioning, full free lift,

Condition: used, color: orange, Year of construction: 2021, operating hours: 3,828 h, Empty weight: 31.000 kg Dimensions (LxBxH): 1077 x 339 x 300 cm Track width: 60 cm Digging depth: 5.395 m Cgsdpjzf I Haofx Ahtow = Additional options and accessories = - Rubber tracks

Condition: used, Year of construction: 2008, turning length: 1,043 mm, turning diameter: 550 mm, spindle bore: 116 mm, spindle speed (max.): 2,000 rpm, CNC lathe, 2 axes, Doosan Puma 400B Year: 2008 Fanuc 21iTB with Manual Guide Max. turning diameter: 550mm Max. turning length: 1043mm Z-axis travel: -1100mm Chuck: 380mm Spindle bore: 116.5mm Max. spindle speed: 2000 rpm Spindle gearbox: low gear, high gear 10-tool turret Steady rest with SMW autoblock, diameter 30-245mm Measuring probe Tailstock Chip conveyor with tray and pump Cgsdpfszh Uq Dox Ahtjw Documentation

Condition: excellent (used), Year of construction: 2024, turning length: 830 mm, turning diameter over cross slide: 720 mm, spindle motor power: 35,000 W, spindle bore: 115 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 830 mm, rotational speed (max.): 2,800 rpm, CNC Lathe with c-axis Cjdpfx Ahjzfgrzetegw DOOSAN - PUMA GT3100M MACH-ID 9658 Make: DOOSAN Type: PUMA GT3100M Control: Siemens 828D ShopTurn Year: 2024 Part catcher Cromar chip conveyor Tool eye probe CROMAR Chip conveyor Samchully Chuck 380 mm 5 BMT Tool holders Max. turning Ø: 720mm X-Axis: 260mm Z-Axis: 830mm Spindle bore: 115mm Speedrange: 2800Rpm Spindle power: 35kW ATC / revolver: 12 Speed live tools:5000Rpm Speed live tools:5000Rpm Power live tools:7.5kW Chip conveyor: Yes Tool eye: Yes Pinole taper: 5Mk Stroke pinole: 100mm Quill Ø: 100mm Length: 4200mm Width: 2100mm Height: 2100mm Weight: 5650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, FOR SALE: Exceptional Lot of 4 DOOSAN Puma 2600S CNC Lathes A rare opportunity on the used market! Ideal for immediately increasing your production capacity or upgrading your machine park. We offer a consistent lot of 4 CNC lathes with 2 axes (X, Z) from the reputable DOOSAN brand, known for their rigidity, precision, and longevity. 🛠️ COMMON FEATURES OF THE RANGE: Brand / Type: DOOSAN Puma 2600S (Note: "26005" is understood as a variation of the standard Puma 2600 model) Kinematics: 2 robust axes (X, Z) CNC Control: FANUC CNC (industrial reliability, easy to learn) Compliance: Original CE certificate available for each machine Documentation: Technical manuals and operating instructions included 📦 DETAILED COMPOSITION OF THE LOT (4 MACHINES): Doosan Puma 2600S Lathe — Ref. A072 Year: 2012 Equipment: Sold complete with its chip conveyor, documentation & CE certificate. Doosan Puma 2600S Lathe — Ref. A074 Year: 2012 Equipment: Sold complete with its chip conveyor, documentation & CE certificate. Csdpezd R E Nsfx Ahtegw Doosan Puma 2600S Lathe — Ref. A076 Year: 2013 (Newer) Equipment: Sold complete with its chip conveyor, documentation & CE certificate. Doosan Puma 2600S Lathe — Ref. A077 Year: 2012 Equipment: Sold complete with its chip conveyor, documentation & CE certificate.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, turning length: 330 mm, turning diameter: 350 mm, spindle bore: 65 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 340 mm, spindle motor power: 15 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, total height: 1,700 mm, total length: 3,600 mm, total width: 1,600 mm, Equipment: rotational speed infinitely variable, USED ​​DOOSAN LYNX 2100B 2-axis lathe with Fanuc i-Series CNC Cgodpfxjzhaawo Ahtsw

Condition: used, fuel type: diesel, fuel: diesel, Year of construction: 2022, operating hours: 509 h, Doosan 77.55 Compressor – 3000 rpm – 8.6 bar – 35.5 kW – Weight 750 kg – 509 operating hours = Additional Information = Year of manufacture: 2022 Codpfx Aheyrigvetegw Intended use: Construction Contact Miguel Cubas for further information. = Company Details = We are located between Antwerp and Brussels along the A12 motorway, close to the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.