Used machining centers (vertical) X-axis travel 700-799mm for sale (200)

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, controller model: WinMax, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 762 mm Travel range, Y-axis: 508 mm Travel range, Z-axis: 610 mm Spindle speed: 12,000 rpm Cholsz Ahx Djhccqkoc Table area: 1,020 × 510 mm Table load capacity: 1,500 kg MACHINE DETAILS Control system: WinMax EQUIPMENT Internal cooling system (ICS) Fourth axis

Condition: like new (used), Year of construction: 2012, operating hours: 4,541 h, functionality: fully functional, machine/vehicle number: SN:79004, travel distance X-axis: 1,035 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 620 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, nominal power (apparent): 14 kVA, torque: 96 Nm, controller manufacturer: Heidenhain, controller model: TNC 620, workpiece weight (max.): 1,000 kg, total height: 2,850 mm, total length: 2,500 mm, total width: 2,910 mm, table width: 540 mm, table length: 1,200 mm, table load: 1,000 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 5,100 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,541 h, coolant supply: 3 bar, distance table to spindle center: 150 mm, spindle motor power: 1,400 W, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, The machine is in excellent condition and is almost like new. It has been used almost exclusively for aluminum prototype construction. Disassembly upon request. Here are all the details from the technical description. SN: 79004, Year: 2012 Commissioned: February 2014 UVA 1035 PLUS Heidenhain Vertical machining center with HEIDENHAIN TNC 620 control, new price, after discount, net 79,900.00 Standard equipment of the UVA 1035 PLUS as ex works: - Computer-optimized, vibration-damping machine base made of gray cast iron - Large linear guides with 45 mm width in all axes Description Overall price - CNC control Heidenhain TNC 620 - Ergonomically arranged control panel with electronic handwheel - Digital Heidenhain drives in all axes - Ball screws (supported on both sides and preloaded) diameter 40 mm - Pitch 12 mm in all axes - Rapid traverse rate 35 m/min in all axes - Guide covers (telescopic) in all axes - Spindle taper SK 40 DIN 69871 A - Tool pull stud DIN 69872 - Main drive with 13 kW, 96 Nm - Main spindle speed range 10 - 10,000 1/min - Preparation for internal cooling 20 bar - Tool changer (dual-arm gripper) with 24 storage locations - Work area full protection with large viewing doors and 2 work area lights - Large coolant tank with 380 l capacity - 2 chip drawers for easy and quick manual chip disposal - Flood coolant 3 bar / 60 l/min - Chip flushing in the work area - Spray gun for cleaning the inside of the machine - Signal light 2-color - Festo pneumatic system - Automatic central lubrication in all axes - All axes: Positioning accuracy +/- 0.005 mm - Repeat accuracy +/- 0.003 mm (ISO 230-3) - Painting in light gray (RAL 7035) and blue gray (RAL 7031) - Documentation - UVA Unverzagt machining centers comply with the CE standard UVA 1035 PLUS Heidenhain Technical details of the machine Travel ranges Travel X-axis [mm] 1,035 Travel Y-axis [mm] 540 Travel Z-axis [mm] 620 Distance spindle bottom edge to table [mm] 150 - 770 Work table Table length [mm] 1,200 Table width [mm] 540 Number of T-slots 5 Slot width [mm] 18 Table load max. [kg] 1,000 Feed Rapid traverse X and Y axis [m/min] 35 Rapid traverse Z axis [m/min] 35 Diameter ball screw X and Y axis [mm] 40 Diameter ball screw Z axis [mm] 40 Main spindle Main spindle speed max. [1/min] 10,000 Main spindle power [S6-40% ED kW] 14 Main spindle torque max. [Nm] [S6-25%] 96 Tool holder SK 40 Tool magazine Number of tool magazine positions 24 Tool change time [sec] 2.8 Chjljzzrmpehccqksc max. tool diameter [mm] 80 max. tool length [mm] 300 max. tool weight [kg] 7 Coolant system Volume coolant tank [l] 380 Through coolant pressure [bar] 3 Through coolant [l/min] 60 Internal coolant supply pressure [bar] 20 (optional) Air blow external yes Basic machine data Installation area width [mm] 2,910 Installation area depth [mm] 2,500 Machine height [mm] 2,850 Weight of the basic machine [kg] 5,100 Electrical connection power [kVA] 30 Required pneumatic connection [bar] 6 Required compressed air [l/min] 260 Control Manufacturer Heidenhain Control type TNC 620

Condition: used, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, feed length X-axis: 1,270 mm, feed length Y-axis: 660 mm, feed length Z-axis: 610 mm, controller manufacturer: Hurco, controller model: Ultimax, workpiece length (max.): 1,500 mm, workpiece width (max.): 660 mm, workpiece weight (max.): 1,300 kg, table load: 1,300 kg, rotational speed (max.): 10,000 rpm, CNC milling machine Hurco VMX 50 | Year of manufacture: 2006 | SK40 | Chip conveyor | Spare parts For sale is a Hurco VMX 50 CNC milling machine / CNC machining center, manufactured in 2006, from our machine inventory. The machine is in a well-maintained and good condition. It is ideally suited for workshops, job shops, as well as training and production companies. Technical data: - Manufacturer: Hurco - Model: VMX 50 Chslhccqsz Iri Iskoc - Year of manufacture: 2006 - Control: Hurco Ultimax - Travels X / Y / Z: 1,270 / 660 / 610 mm - Table size: 1,500 × 660 mm - Table load: approx. 1,300 kg - Tool holder: SK40 - Spindle speed: up to 10,000 rpm, depending on the model - Rapid traverse X / Y / Z: 30 / 30 / 20 m/min - Tool changer: 20-position - Internal coolant system: included - Coolant system: included - Chip conveyor: included Equipment: - Chip conveyor included - Various spare parts included - LAN-capable via existing WR box - Coolant system included Sale & Handling The machine is sold ex works. Pickup only. Inspection and demonstration under power are possible upon request. Loading can be arranged after consultation. Price: net plus statutory VAT. If you are interested, have any questions, or would like to arrange an inspection, please contact us.

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller manufacturer: SIEMENS, spindle speed (max.): 24,000 rpm, number of axes: 3, This 3-axis DMG MORI MILLTAP 700 was manufactured in 2013. It features a spindle speed of 24,000 rpm and a travel distance of 700 mm in the X-axis, 420 mm in the Y-axis, and 380 mm in the Z-axis. If you are looking to get high-quality machining capabilities, consider the DMG MORI MILLTAP 700 vertical machining centre we have for sale. Contact us for further details. Cslhccqjz Iym Iekehc Technical Specification Taper Size BT 30

Condition: excellent (used), Year of construction: 2010, operating hours: 32,300 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 11 kVA, controller manufacturer: Hurco, controller model: WINMAX, workpiece weight (max.): 340 kg, table width: 356 mm, table length: 762 mm, table load: 340 kg, overall weight: 2,900 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 32,300 h, spindle motor power: 11,000 W, spindle nose: CAT 40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, 2010 Hurco VM10 CNC Milling Machine with CAT 40 Spindle, WINMAX Control 2010 Hurco VM10 Vertical Machining Centre with WINMAX CNC Control, CAT 40 spindle, 20-tool ATC and premium software package. Good condition. Delivery throughout Ireland, UK & Europe. Manufacturer: Hurco Model: VM10 Machine Type: 3 Axis Vertical Machining Centre Year: 2010 Hours: 32,300hrs Control: WINMAX Condition: Excellent For sale is a 2010 Hurco VM10 Vertical Machining Centre in good working condition, equipped with the renowned Hurco WINMAX CNC Control (Version V08.01.04.33) and a CAT 40 10,000rpm spindle. The Hurco VM10 is recognised worldwide as one of the most reliable and user-friendly vertical machining centres for precision CNC milling, toolroom machining, prototype manufacture, small batch production, mould making, and general engineering. With 32,300 machine hours, this machine remains an excellent opportunity for engineering companies looking for an affordable, high-quality used CNC machining centre from one of the industry's most respected manufacturers. Please note: No tooling is included with the machine. Technical Specifications Manufacturer: Hurco Model: VM10 Year: 2010 Machine Type: Vertical Machining Centre CNC Control: Hurco WINMAX Mill V08.01.04.33 Machine Hours: 32,300 Hours X Axis Travel: 660 mm Y Axis Travel: 406 mm Z Axis Travel: 508 mm Table Size: 762 × 356 mm Maximum Table Load: 340 kg Spindle Taper: CAT 40 Spindle Speed: 10,000 RPM Spindle Motor: 11 kW (15 HP Peak) Automatic Tool Changer: 20 Station ATC Rapid Traverse (X/Y/Z): 24 m/min Machine Weight Approx.: 2,900 kg Condition: Excellent Working Condition Tooling: No Tooling Included Installed WINMAX Software Options This machine is equipped with an excellent range of factory software options including: Advanced Verification Graphics DXF File Import Cslhsziu Hzjccqkshc NC Productivity Package Industry Standard NC Programming UltiPockets Rigid Tapping Helical Ramp Milling 3D Mold Package NC Conversational Merge Swept Surface Machining Select Surface Finish Quality These options significantly enhance programming flexibility, machining accuracy and production efficiency, making the VM10 suitable for both conversational programming and full ISO/G-Code machining. Notes: *Specifications are given in good faith but not guaranteed* Key Features Hurco WINMAX Conversational CNC One of the easiest CNC controls to learn and operate, allowing operators to quickly produce components without extensive G-Code programming. CAT 40 High-Speed Spindle The industry-standard CAT 40 spindle provides excellent tooling availability and rigidity for machining steel, aluminium, plastics, composites and engineering materials. 20 Station Automatic Tool Changer Fast automatic tool changes reduce machining time and improve production efficiency. Compact High-Performance Design Large machining travels combined with a compact footprint make the VM10 ideal for workshops where floor space is at a premium. High-Speed Precision Machining The 10,000 RPM spindle combined with rapid traverse rates enables efficient production while maintaining excellent surface finishes. Proven Hurco Reliability Hurco machining centres are recognised worldwide for their durability, ease of maintenance and excellent resale value. Machine Condition: Excellent Condition Fully operational Ready for immediate production No tooling included in sale Inspection welcome

Condition: good (used), Year of construction: 2012, Haas VF-2SSYT Year of manufacture: 2012 Spindle speed: 12,000 RPM CT40 taper Tool Set Carousel (TSC) Workpiece Probe System (WPS) Renishaw probing system 4th axis, wired Video available! Cjlhoz Ihc Rsccqkshc

Condition: good (used), Year of construction: 2010, operating hours: 115,503 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, torque: 100 Nm, controller manufacturer: Fanuc, workpiece width (max.): 670 mm, workpiece weight (max.): 1,000 kg, total height: 2,940 mm, total width: 2,750 mm, table width: 670 mm, table length: 1,400 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 8 bar, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 420 V, type of input current: three-phase, Equipment: documentation/manual, BT 40. No chip conveyor. Chjlhcsyx U Nwecqkec

Condition: used, Year of construction: 2002, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Haas Machining Center 3 Axes + 1 Cjlhccsz Ir Nusqkjhc Model VF-1DHE Year 2002 Documentation Available Includes 4-Axis Rotary Table Video Available Inspection Possible

Condition: ready for operation (used), Year of construction: 2007, Hurco VMX 30 T vertical machining center 3-axis Year: 2007 Controller WINMAX DSM Double screen Table size 1020 x 510 mm Table load max 1350 kgs X travel 762 mm Y travel 510 mm Z travel 610 mm Spindle speed 12000 rpm Spindle taper SK40 Spindel power 11/15 kW Weight 4900 kgs Dimensions LxWxH = 2300 x 2400 x 2600 mm Accessories/options: - Coolant tank - Spindle coolant unit - Chip conveyor - software options Cslhcoz H Nviecqkshc Under power in our warehouse.

Condition: excellent (used), Year of construction: 2017, operating hours: 2,742 h, functionality: fully functional, machine/vehicle number: MV0061-000661, travel distance X-axis: 762 mm, travel distance Y-axis: 516 mm, travel distance Z-axis: 570 mm, controller manufacturer: Fanuc, workpiece length (max.): 800 mm, workpiece width (max.): 550 mm, workpiece height (max.): 460 mm, total height: 2,580 mm, total length: 3,260 mm, total width: 3,130 mm, table width: 570 mm, table height: 880 mm, table length: 860 mm, overall weight: 9,200 kg, distance table center to spindle nose: 720 mm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, input voltage: 380 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, Doosan VC 510 (2017) – Vertical Machining Center with APC High-productivity 40-taper vertical machining center featuring a heavy-duty column-moving design and an integrated 2-pallet automatic pallet changer (APC). Key Specifications: Year: 2017 Control: Fanuc Travels (X / Y / Z): 762 × 516 × 570 mm Pallet Size (×2): 860 × 570 mm (Rotary APC, ~6 sec swap) Max Workpiece Size: 800 × 550 × 460 mm Max Table Load: 350 kg per pallet Spindle Motor (kW): 15(30min)/11(CONT.) Chslsz Atqrjhccqkoc Max. Torque (Nm): 191.1(30min) Tool Changer (ATC): 30 Tools Rapid Traverse (X/Y/Z): 40 / 40 / 32 m/min Guideways: Heavy-duty Roller LM Guides Machine Weight: ~9,200 kg Excellent condition, fully maintained, and built for continuous high-speed production. Contact for inspection and further details.

Condition: good (used), Year of construction: 2003, functionality: fully functional, HAAS VF 2 VERTICTAL MACHINING CENTRE TABLE 914 X 356 MM TRAVERSES - 762 X 406 X 508 MM MAX CUTTING RATE 16.5 M/MIN Cholhccsz Ehxysqkec SPINDLE MOTOR 20 HP 20 ATC 40 TAPER SPINDLE SWARF CONVEYOR STANDARD COOLANT OVERALL DIMESIONS - 2790 X 2350 X 2650 MM WEIGHT 3.5 TON ORIGINAL PAINTWORK , VERY VERY GOOD FOR ITS AGE .

Condition: like new (used), Year of construction: 2006, operating hours: 9,039 h, functionality: fully functional, total height: 2,992 mm, total length: 3,980 mm, total width: 2,580 mm, overall weight: 8,500 kg, operating hours of spindle: 671 h, number of slots in tool magazine: 48, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this as new Quaser MV154 APC/P vertical machining center, year of construction 2006. The machine has 9039 power-on hours, but only 671 spindle-hours, this has been confirmed in the parameters aswell. The machine has seen very little usage. When i bought this machine the linear guides for the X & Y axis was worn out as they had not been lubricated properly and with the incorrect grease. These have been swapped for brand new ones, aswell as most of the air and coolant hoses. All the lubricating lines for the X & Y guides and ballscrews have also been renewed. There are some tools in the 48 tool magazine aswell. It also has a 3D Taster. The chip conveyor also has new bearings and seals. Two Hilma vices could also come with the machine. I have done a ballbar test and checked the machine to be in great working order. Cjlhccqjzxz Dfekohc The size of the machine also makes transportation easy, as it will fit inside a standard curtain semitrailer. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2004, operating hours: 16,651 h, functionality: fully functional, machine/vehicle number: M342-06204054DFA, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, feed length X-axis: 760 mm, feed length Y-axis: 510 mm, feed length Z-axis: 610 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 18 kVA, torque: 236 Nm, controller manufacturer: Hurco, controller model: Ultimax 4, workpiece length (max.): 1,020 mm, workpiece width (max.): 510 mm, workpiece height (max.): 610 mm, workpiece weight (max.): 750 kg, total height: 2,700 mm, total length: 280 mm, total width: 2,300 mm, table width: 510 mm, table height: 850 mm, table length: 1,020 mm, table load: 1,000 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 4,500 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, coolant supply: 6 bar, spindle nose: Steilkegel Gr. 40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Excellent condition: Hurco VMX 30 with extremely low operating hours! For sale is a very well-maintained, vertical 3-axis machining center, a Hurco VMX 30, manufactured in 2004. The machine is in exceptionally good condition for its age. As can be easily seen from the operating hours, the machine has only been used very little by us. It was used exclusively for light-duty operation/toolmaking and was not subjected to heavy series production. The mechanical components (guideways, ball screws, and spindle) are correspondingly only slightly worn and offer high precision. The machine is equipped with the popular Ultimax 4 dual-screen control system, which is highly regarded worldwide for its extremely fast and easy dialog programming directly on the machine. Colozudd Tehccqkjhc

Condition: ready for operation (used), Year of construction: 2018, operating hours: 17,822 h, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, table load: 250 kg, spindle speed (max.): 16,000 rpm, spindle motor power: 4,900 W, number of axes: 4, This 4-axis Brother Speedio S700 X1 was manufactured in 2018. It features an X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 300 mm. The machine includes a table size of 1150 x 400 mm and a maximum table load capacity of 250 kg. If you are looking to get high-quality machining capabilities, consider the Brother Speedio S700 X1 vertical machining centre we have for sale. Contact us for further details. • Table size: 1150 x 400 mm • Spindle taper: 7/24 No. 30 (Big-Plus) Dual Contact / BT30 • Tool shank: MAS-BT / BBT30 • Retention knob: MAS-P30T-2 (30°) • Tool changer: 21-tool carousel, total load capacity 35 kg Chslhccez Hmn Njqkoc • Tool change time (tool-to-tool): 0.8 s • Tool balance limit: 50 g • Rapid traverse rates: X 50 m/min, Y 50 m/min, Z 56 m/min • CNC control: CNC-C00 • Machine control indicated readings (recorded : Total operation time 17,822 h; Power-on time 33,212 h • Excluded equipment: External hydraulic unit Additional equipment • Hydraulic fixing table • Renishaw broken tool detector • Transformer / power supply unit • HAKUSAN chip conveyor • Emulsion mist separator SARA UC 1 SD

Condition: used, Year of construction: 2014, operating hours: 24,209 h, functionality: fully functional, machine/vehicle number: 286-56, total height: 3,000 mm, total length: 4,545 mm, total width: 2,450 mm, table width: 860 mm, table height: 975 mm, overall weight: 10,800 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 7,500 W, number of spindles: 1, number of slots in tool magazine: 48, Equipment: chip conveyor, documentation/manual, For sale is a CHIRON FZ15 W Magnum high-speed machining center (Type 286-56) from 2014. The machine is a fast, single-spindle traveling column machine with an integrated workpiece changer and a FANUC control (31i series), designed for productive series machining of metal and plastic parts (milling, drilling, threading, reaming, boring). Technical data: Control: FANUC 31i Travel ranges X/Y/Z: 730 / 400 / 360 mm Rapid traverse X/Y/Z: 75 m/min Spindle speed max.: 12,000 min⁻¹ Spindle power: 7.5 – 15.0 kW Spindle torque max.: 95 Nm Tool holder: HSK-A63 Tool magazine: Chain magazine, 48 positions Max. tool length: 300 mm Max. tool diameter: 78 mm (140 mm with free adjacent position) Max. tool weight: 8 kg (10 kg with reinforced positions) Workpiece changer (tandem/tilting device), bridge dimension 800 mm, max. fixture height 234 mm Enclosed cabinet, coolant emulsion Equipment / Peripherals: Coolant system TPF 350S (Bürener) with paper band filter and double safety filter, filling volume approx. 980 l Tool internal cooling (high pressure through spindle) Chip conveyor Extraction system / emulsion mist separator (Handte, EM Compact 800) Control cabinet cooler Oil central lubrication Table measuring probe Renishaw TS27R Coolant gun Energy-saving and warm-up functions (PowerSave / WarmUp) Connection values: Electrical connection: approx. 27 kVA, connection M40 Compressed air: min. 5.5 bar, approx. 510 Nl/min Celhcezv Tlvjcqkehc Coolant connection DN40 Dimensions / Installation: Footprint approx. 4,543 × 4,441 mm (L × W, incl. peripherals) Height approx. 2,405 mm (max. 3,042 mm with extraction system)

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: FANUC, controller model: Series 31i – Model B, total height: 2,400 mm, total width: 1,900 mm, overall weight: 2,200 kg, spindle speed (max.): 24,000 rpm, tool weight: 23,000 g, product length (max.): 2,115 mm, number of axes: 4, This 4-axis FANUC ROBODRILL α-D21LiB was manufactured in 2018. It features an impressive X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 330 mm. The machine includes a robust clamping area of 850 × 410 mm and a maximum workpiece weight of 250 kg. If you are looking to get high-quality machining capabilities, consider the FANUC ROBODRILL α-D21LiB vertical machining centre we have for sale. Contact us for further details. Travels and speeds • Rapid traverse (X/Y/Z): 48 m/min • Feed rate (X/Y/Z): 1–15,000 mm/min • Interference radius: 380 mm • Spindle nose to table: 350–680 mm • Configuration: 4 axes • B-axis: 0–360°Table • Clamping area: 850 × 410 mm • T-slots: 3 • T-slot width: 14H14 mm • T-slot spacing: 125 / 250 mm • Table height from floor: 815 mm • Max. workpiece weight: 250 kgSpindle • Spindle bearing diameter: 50 mm • Max. torque: 35 Nm (100% duty)Tool magazine • Stations: 21 • Max. tool diameter: 80 mm • Max. tool length: 200 mm • Tool clamping force: 2,200 N • Max. tool weight: 2 kg/tool • Total tool mass: 23 kgCutting capacity • Max. metal removal rate: 600 cm³ • Max. drilling diameter: 20 mm • Max. tapping: M16Feed forces • X-axis: 2,700 N • Y-axis: 2,700 N • Z-axis: 5,400 NElectrical • Voltage/Frequency: 400 V / 50 Hz • Connected load: 22 kVA • Power requirement: 17.6 kWUnits available and runtimes • Unit 1 • FANUC S/N: P182ZL013 • STAMA S/N: KMM 021.1705 • Runtime: 400 h 20 min 5 sec • Unit 2 Cslhccqez E Sthjkshc • FANUC S/N: P1827L014 • STAMA S/N: KMM 021.1704 • Runtime: 29,444 h 47 min 12 sec Additional equipment • KNOLL KF 200/950 cooling unit • Unit 1 S/N: 1347674 • Unit 2 S/N: 1347675 • KNOLL 300 K-1 chip conveyor • Unit 1 S/N: 1347673 • Unit 2 S/N: 1347676 Technical Specification Taper Size SK 30

Condition: excellent (used), Year of construction: 2014, operating hours: 21,800 h, functionality: fully functional, machine/vehicle number: P147YH288, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, nominal power (apparent): 11 kVA, overall weight: 2,200 kg, spindle speed (max.): 24,000 rpm, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 21, Equipment: documentation/manual, Equipment: - FANUC DDR-T 4th axis digital rotary table with tailstock - high-pressure through-spindle coolant, 24,000 rpm - 200L chip conveyor with high-pressure pump - automated side door for robotic loading - machine under annual FANUC maintenance contract - optional extra: integrated Fanuc M20iA12L robot already mounted on the machine Cjlhcezhi Nzecqkjhc

Condition: ready for operation (used), Year of construction: 2013, operating hours: 21,658 h, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP-P200M, table load: 800 kg, overall weight: 6,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 20, number of axes: 3, This 3-axis Okuma M460R-VE vertical machining centre was manufactured in 2013. It features a robust X-axis travel of 762 mm, Y-axis travel of 460 mm, and Z-axis travel of 460 mm. The machine is equipped with a powerful 15 kW spindle that can reach speeds of up to 15,000 rpm, along with a tool magazine capacity of 20. If you are looking to get high-quality machining capabilities, consider the Okuma M460R-VE machine we have for sale. Contact us for further details. Chjlhccqsy Nb Nxokoc • Table size: 1000 × 460 mm Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 730 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis DMG DMU60 Monoblock was manufactured in 2014. It features a Heidenhain iTNC 530 control unit, ensuring precision and reliability. The machine operates at a voltage of 400 V and has a power rating of 41 kVA. If you are looking to get high-quality machining capabilities, consider the DMG DMU60 Monoblock vertical machining centre we have for sale. Contact us for further details. - Voltage: 400 V- Control Voltage: 24 V- Frequency: 50 Hz- Power / Apparent Power: 41 kVA- Max Current: 63 A- Additional Accessories: Standard items such as tools and holders, no specific special accessories included. Chjlhjz Hk T Noccqksc

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, controller manufacturer: Haas, total height: 2,500 mm, total length: 3,500 mm, total width: 2,800 mm, table width: 450 mm, table length: 1,200 mm, overall weight: 6,000 kg, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, A Haas VF3 CNC vertical machining center is available. X/Y/Z axis travels: 1010mm/508mm/635mm, table dimensions X/Y: 1200mm/450mm, maximum table load: 1500kg, rapid traverse rate: 25m/min, feed rate: 16m/min, number of tool positions: 20, machine dimensions X/Y/Z: approx. 3500mm/2500mm/2800mm, weight: approx. 6000kg. On-site inspection is possible, and the machine can be powered on. Chslhccqezu Dfdskoc

Condition: good (used), Year of construction: 2020, Traverses X Y Z: 762 x 508 x 610mm, Table 1020 x 510mm, Spindle speed 40 – 12000 rpm, Hurco Winmax 5 Control, Spindle taper DIN40, 30 ATC, Chelhsz Ha Ayeccqksc Coolant, Low volt light, Swarf Conveyor

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total height: 2,600 mm, total length: 3,300 mm, total width: 2,000 mm, overall weight: 5,600 kg, spindle speed (max.): 12,000 rpm, number of spindles: 1, Equipment: chip conveyor, documentation/manual, Here is an offer for a vertical machining center from the manufacturer Akira Seiki with a dual-pallet changer. The machine is in good condition and can be inspected and tested at any time. Manufacturer: Akira Seiki Type: RMV700APC Year of manufacture: 2016 Control: Akira Mi745 - Mitsubishi Technical data: Travel ranges X-Y-Z: 700x400x400 mm Table/pallet: 700x400 mm Number of pallets: 2 (APC) Max. table load: 160 kg Spindle nose to table: 200–600 mm Spindle speed: 12,000 rpm Rapid traverse rate X: 48 m/min Rapid traverse rate Y: 60 m/min Rapid traverse rate Z: 72 m/min Cutting feed rate: 10 m/min Tool magazine: 24 + 1 Cslhccqszwvqkekohc Spindle taper: HSK63 Max. tool diameter: 75 mm Max. tool length: 200 mm Max. tool weight: 4.5 kg Tool change time (T–T): 1.9 s Chip-to-chip time: 3.4 s Positioning accuracy: 0.012 mm Repeatability: ±0.005 mm Coolant tank: 150 l Power consumption: 25 kVA Compressed air: 0.5 MPa Machine weight approx.: 5,600 kg Footprint according to manufacturer: 1,900 × 3,144 mm

Condition: excellent (used), Year of construction: 2017, operating hours: 15,200 h, functionality: fully functional, machine/vehicle number: P172ZH357, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, nominal power (apparent): 11 kVA, overall weight: 2,200 kg, spindle speed (max.): 24,000 rpm, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 21, Equipment: documentation/manual, Equipment: - FANUC DDR-T 4th axis digital rotary table with tailstock - high-pressure through-spindle coolant, 24,000 rpm - 200L chip conveyor with high-pressure pump - automated side door for robotic loading - machine under annual FANUC maintenance contract - optional extra: integrated Fanuc M20iA12L robot already mounted on the machine Cslhccqszhi R Sjkohc

Condition: like new (used), Year of construction: 2008, operating hours: 1,780 h, functionality: fully functional, Controller WINMAX DSM Double screen Table size 1020 x 510 mm Table load max 1350 kgs X travel 762 mm Chelhcoz Elldscqkjc Y travel 510 mm Z travel 610 mm Spindle speed 12000 rpm Spindle taper SK40 Spindel power 11/15 kW Weight 4900 kgs Dimensions LxWxH = 2300 x 2400 x 2600 mm Accessories - Coolant unit - Chip conveyor - SW options: 3D, pocket islands, rigid tapping, DXF, NCPP, ISNC, select surface, advanced graphics, material and tool databank - machine mounths

Condition: good (used), Year of construction: 2014, functionality: fully functional, HAAS VF-2SS | 4th axis | Through-spindle coolant | 2014 Vertical CNC Machining Center HAAS VF-2SS, manufactured in 2014. Machine equipped with a 4th axis and through-spindle coolant (TSC). Technical specifications: X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table size: approx. 914 × 356 mm Max. table load: approx. 680 kg Spindle speed: 12,000 rpm Spindle taper: CT/BT 40* Cjlhccez Dh Edjqkohc Spindle drive: direct drive Tool changer: 24+1 positions* Rapid traverse X/Y/Z: up to 35.6 m/min CNC control: HAAS Through-spindle coolant (TSC) 4th axis included Tool holders: not included Year of manufacture: 2014 Operating hours: not available Previous operation: 2–3 shifts Equipment: 4th axis Through-spindle coolant High-speed Super Speed (SS) version Automatic tool changer Coolant system Machine inspection can be arranged by prior agreement.