Condition: new, Cutting range: round 0°: 170 mm square 0°: 150 x 150 mm flat 0°: 150 x 190 mm round 45°: 125 mm square 45°: 95 x 120 mm working height : 870 mm cutting speeds : 40 / 80 m/min saw band: 2080 x 20 x 0,9 mm coolant pump: 100 W saw motor: 0,75 kW connection: 400 V dimensions L x W x H, approx.: 1340 x 810 x 1320 mm Weight, approx.: 146 kg Features: - Saw bow can be tilted up to 45°. - With 2 saw blade speeds for optimum adaptation to the workpiece - Ideal for cutting tubes, profile material as well as solid material made of VA, iron, etc. - Generously dimensioned saw arm for low-vibration work - Lowering of the saw arm via hydraulic lowering cylinder - Low noise level due to stable design - Switch-off after end of cut by micro limit switch - Quick-action vice for simple and fast workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - Coolant system with pump - Incl. base frame - CE/IEC, German documentation and German service Scope of delivery: - BiMetal saw band 2080 x 20 x 0.9 mm, 6/10 ZpZ - Band tension adjustable via manometer - quick clamping vice - material stop - Coolant device with pump Coloilk H Tjn Ti Nkerb - Hydraulic lowering cylinder - Motor protection switch - Automatic limit stop after end of cut - underframe

Condition: used, Year of construction: 2001, Technical details: saw blade diameter: 250/285 mm cutting diameter: 50-70 mm total power requirement: 5,5 kW weight of the machine ca.: 1 t Saw type: circular saws Cutting direction: straight cut Cjln Tiou T Tyme Nkerb Automation: automatic Material type: structural steels, stainless steels, tool steels Material width: 60 mm Material height: 70 mm *

Condition: refurbished (used), Year of construction: 2010, Used automatic hydraulic band saw for metal MEP SHARK 332 NC EVO Sheet dimensions: 3320x27x0,9mm Cutting angle: from 45° to +60° Operating modes: manual, semi-automatic-dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Crjlnjul Svlj Ti Nksb Dimensions: 2600x2320x2000mm Weight: 1050kg The machine is fully rebuilt and tested.

Condition: excellent (used), I sell a massive band saw for cutting metal in bdb condition. Croleu Udrion Ti Nksb

Condition: good (used), Year of construction: 1980, machine/vehicle number: 40435, Offer 24504 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° round 130 mm - square 120 mm - rectangle 300 x 40 mm - or 240 x 85 mm - at 45° round 130 mm - square 110 mm Cjlnovqa Nbo Ti Nkjrb - rectangle 245 x 40 mm - Miter adjustable left + right 0 - 90 ° each - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydraulic. continuously adjustable - Hydraulic vertical metal clamping - 2 horizontal clamps manual - Coolant system - Removal roller conveyor with dimension stop approx. 2000 mm - Space requirement approx. W 800 x H 1850 x D 1100 mm - Weight approx. 850 kg

Condition: used, Year of construction: 2002, - Material feed up to 600 mm - Year of construction 2002 specifications - Cutting range 90° round/flat: 335 / 500x335 mm - Miter right 45° round/flat: 330 mm / 320x335 mm - Mitre right 30° round/flat: 200 mm / 200x335 mm - Clamping range bundle clamping width/height: 0-500 mm / 15-335 mm - Material insertion single/multiple: 0-600 mm / 0-9999 mm - Remaining piece length manual/automatic: approx. 70 mm / approx. 110 mm - Cutting speed: 15 - 150 m/min (AC drive) - Cutting pressure: infinitely variable hydraulic - Lowering speed: 0 - 300 mm/min (infinitely variable) - Saw blade dimensions: 4400 x 34 x 1.1 mm - Saw blade tension: with torque wrench - Max. Support weight: max. 250 kg/m - Working height: 750 mm - Noise emission: 74 dB(A) Connection data: - Power supply: 3x 400 V / N / PE / 50 Hz - Compressed air: 6 - 8 bar, min. 50 l/min - Saw blade drive: 3.0 kW - Coolant pump: 0.11 kW Cjln Ti Nsu Uu Hwskorb - Hydraulic pump: 2.2 kW - Electric swivel drive: 0.09 kW - Spindle insert drive: 0.55 kW - Total power requirement: min. 7.5 kW - Rated current: 16 A - Back-up fuse: 25 A Filling quantities: - Hydraulics: approx. 30 l - Coolant: approx. 80 l - Micro-sprayer: approx. 0.7 l Dimensions: - Weight of the machine: approx. 1710 kg - Machine dimensions WxHxD: approx. 2500 x 1900 x 2300 mm

Condition: new, Machine in stock and immediately available Horizontal mitre band saw S 225 G Cutting range 90°, round: 225 mm Cutting range 90°, square: 200 x 200 mm Cutting range 45°, round: 160 mm Crsln Tod R Sklei Nkeb Cutting range 45°, square: 160 x 160 mm Cutting range 60°, round: 100 mm Cutting range 60°, square: 100 x 100 mm Saw blade: 2480 x 27 x 0,9 mm Cutting speeds: 45 / 90 m/min motor power: 1,5 kW Voltage: 400 V Scope of delivery - BiMetal saw blade 2480 x 27 x 0,9 mm, 6/10 ZpZ - Carbide guides (4 jaws) - Adjustable workpiece stop 0,5 m - Manometer for band tension - Vice with quick clamp - Integrated coolant system - Hydraulic clamp lowering - Motor protection switch - Automatic limit stop - Underframe

Condition: used, Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 186854001, TECHNICAL DETAILS Saw blade length: 4,250 mm Saw blade width: 34 mm Total height: 1,950 cm Overall length: 4,120 cm Total width: 2,450 cm Cutting speed: 150 mm/min Cutting range: 500 mm Cutting range round at 45°: 300 mm Cutting range round at 90°: 305 mm Cutting width: max. 500 mm Square cutting range at 90°: 280 mm Cutting range square at 45°: 270 mm Cutting angle range: 30 - 150 degrees Roller conveyor at the entrance: 9 meters (to feed the machine) Roller conveyor at the saw outlet: Retractable 1-meter roller conveyor MACHINE DETAILS Motor power: 2,200 W Type of input current: three-phase Input power: 2.2 kW (2.99 hp) Table height: 845 mm Total weight: 2,100 kg Cutting height: max. 305 mm Input voltage: 400 V EQUIPMENT Croletrdmien Ti Nksb Emergency stop switch sensors Saw band brushes WIKUS saw bands Documentation/Manual

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, saw blade diameter: 550 mm, saw blade speed: 3,000 rpm, cutting length (max.): 3,350 mm, saw blade bore: 33 mm, saw blade width: 5 mm, swivel angle A-axis (min.): -23 °, swivel angle A-axis (max.): 45 °, Machine is provided "free loaded truck". No dismantling and loading costs! TECHNICAL DETAILS Saw blade diameter: 550 mm Saw blade bore: 33 mm Saw blade width: 5 mm Workpiece length: 300 - 3,350 mm Swivel range: -22.5° to +45° (servo-controlled) Type: carbide saw blade Saw drive Motor power: 3 kW Creln Tiovvv Ahj Nkjb Speed: 3,000 rpm Feed drive Power: 0.75 kW Speed: 3,000 rpm Cutting area Hydro-pneumatic feed control: available Cutting zone protective covers: available Horizontal and vertical pneumatic clamping devices: available Lubrication system Cooling lubrication system: available Operation and automation Touchscreen control panel: Smart Touchscreen Panel PC Integration of the digital loading conveyor: available MACHINES DETAILS Dimensions: 4,268 x 1,905 x 1,600 mm Weight: 440 kg Air pressure: 6 - 8 bar Air consumption: 98.5 l/min Compatibility and control Compatibility with cutting lists: available Safety operation (two-hand control): available Data transfer: Ethernet and USB

Condition: used, Year of construction: 1989, saw blade diameter 320 - 350 mm cutting diameter 120 mm turning speeds 16 / 25 U/min total power requirement 2,0 kW Coln Ti Njvl Tqzeksrb weight of the machine ca. 1,36 t dimensions 1,0 x 0,8 x 1,8 m Cold circular saw with - 45 degree miter - coolant system - incl. 3 saw blades

Condition: good (used), Year of construction: 2008, Manufacturer: EBG-TECH Type: BMW N-63 Year: 2008 Max. disk diameter: 300 mm Celef Ecwzsn Ti Nkorb Overall size: 1900 x 1200 x 2900 mm Weight: 1750 kg

Condition: ready for operation (used), Gebruikte Amada industriële machines – HA250W gevestigd in België. Deze lintzaagmachine heeft een tafelhoogte van 700 mm, een bladsnelheid van 27-90 m/min en een zaagbladmotor van 3,7 kW. Meer informatie: Creln Tsk D Hmvsi Nksb De machine is inclusief accessoires.

Condition: new, Cutting area round 0°: 127 mm Cutting area flat 0°: 125 x 130 mm Cutting area round 45° right: 90 mm Cutting area square 45° right: 90 x 90 mm Cutting area round 60° right: 45 mm Coln Tjilk Ekoi Nksrb Cutting area square 60° right: 45 x 45 mm Vice opening: 130 mm Saw blade dimensions: 1440 x 13 x 0.65 mm Cutting speed: 60 m / min Motor power: 0.55 kW Voltage: 230 V Weight approx.: 25 kg Features: - Saw arm can be tilted up to 60 - Ideal for cutting pipes, profile material and solid material made of VA, iron, etc. - Stable saw arm for low-vibration work - Low-noise due to stable design - Micro limit switch switches off at the end of the cut - Quick-clamping vice for quick and easy workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - Environmentally friendly, as there is no need to use lubricants and coolants - Ideal for use on construction sites due to its low weight - Underframe optionally available (not included in the scope of delivery) Equipment: - Saw blade 1440 x 13 x 0.65 mm - Material stop - Ergonomic handle Underframe available at an extra charge: 149 Euro net

Condition: good (used), Used cold circular saw from EISELE EISELE VMS-III-S-PV cold circular saw Current 400V 16A Motor power 2 / 2.6kW Automatic sequence: close vice, down/up, open vice Coln Tijvl T Nke Nkerb Requires compressed air 4-6 bar for pneumatics Miter cuts possible Saw blade revolutions 17 and 34 rpm Saw blade diameter max 350mm (300mm mounted) Coolant device with pump With roller conveyor on the left approx. 2m Total weight approx. 400kg UVV would need to be renewed Good condition. Fully functional. Inspection and collection possible Shipping Germany (excluding islands) 149.00 euros net The goods can be inspected at the 59379 Selm location by appointment. You will receive an invoice with VAT shown. Payment information: Payment by bank transfer before delivery of the goods. Or cash payment upon collection.

Condition: refurbished (used), Fully automatic circular saw machine Kaltenach KKS 400NA Celn Tstqnimsi Nkorb Machine has had a major service where several parts have been replaced. Price on request. TM-Tools B.V. is the Kaltenbach overhaul specialist in the Benelux. More information can be requested via email.

Condition: new, cutting diameter 185 mm saw band length 2.085 x 20 x 0,90 mm table height 920 mm band speed 35 + 70 m/min Colnjvn Uzao Ti Nksrb connected load frequency 400 V total power requirement 0,8 kW weight of the machine ca. 200 kg

Condition: good (used), Functionality: fully functional, cutting range round at 90°: 360 mm, Heavy-duty bow saw semiautomatic Creln Tevi Izcji Nkeb

Condition: good (used), Year of construction: 2000, Functionality: fully functional, center width: 1,000 mm, center height: 205 mm, spindle bore: 52 mm, swing diameter over top slide: 410 mm, spindle speed (max.): 2,000 rpm, type of input current: three-phase, overall weight: 1,150 kg, Horizontal lathe - in between centers: 1000mm - diameter above bed: 410mm - centerheight: 205mm - spindle bore: 52mm - spindle speed: 2000mm max. Machine equipped with: - selfcentering 3 jaw chuck - independant 4 jas Chuck Croln Tijuyynao Nksb - fix and steady rest - drill chuck - lubrication unit

Condition: new, Cutting width: 355 mm Cutting height: 230 mm Csln Tieilpz Hj Nksrb working height: 960 mm Table size: 500 x 400 mm Infinitely variable cutting speed: 20 - 90 m/min Saw band length: 2840 mm Saw band width: 3 - 16 mm Tiltable and inclinable table in 4 directions: 15°. Motor power: 0,75 kW Weight, approx.: 250 kg Scope of delivery: - Saw band - Infinitely variable cutting speed - Band welding device with annealing unit - Machine light - shear - Grinding station - Chip brush - Blow out unit - LED digital display (to indicate cutting speed) - Table with stop groove - Rip fence - CE

Condition: new, 310 mm 310 mm 340 x 310 mm saw band length 3730 x 34 x 1,1 mm table height 922 mm band speed 15 - 100 m/min total power requirement 3,0 kW weight of the machine ca. 1,65 t Crsljvn Uy Aon Ti Nkob dimensions 1950x1755 m 2-column automatic band saw X-Smart 3 • Modern CNC control, freely programmable for multiple sawing jobs various cutting lengths and quantities • Inclination of the saw frame for maximum service life of the saw band • 2-column structure linearly guided on both sides • Linear guided button for automatic cutting height detection • Hydraulic clamping pressure reduction (option) for thin-walled pipes and profiles • Hydraulic cutting pressure regulation for maximum cutting performance • Material feed carriage in bridge construction for optimal performance Transport/feed and tension of the saw material • Feed unit via precision ball screw • Double vise before and after the saw band • Electrically driven chip conveyor • Cleaning gun for easy cleaning of the system • Full fairing with easy access for maintenance and cleaning • LED work light • Minimum remaining piece length of 50 mm • Waistband tensioning device (option)

Condition: good (used), Functionality: fully functional, saw band length: 5,620 mm, saw band width: 41 mm, cutting range round at 45°: 450 mm, cutting range round at 90°: 450 mm, Band saw semiautomatic with left and right mitre capability Croleviu Hlsn Ti Nkjb

Condition: excellent (used), The Maco BSS 360 AR fully automatic bandsaw features programmable angular rotation. This enables fully automatic cutting of pipes and profiles to the right length and miter angle. Creln Ti Netvwxfsksb To minimize vibration during sawing, the saw frame is made of cast iron. The Maco BSS 360 AR can be operated in both semi-automatic and fully automatic modes. The machine is equipped with a 5″ touch screen for operation. The machine can be programmed via this screen and diagnostic data can be read. In the control, 200 programs can be stored, with the option of entering length, off-cut length, number of pieces, angles and off-cut corners in each program. Mitre sawing is possible from 60° left to 45° right. Material clamp automatically moves according to the mitre angle to be cut. The feed clamp has a stroke of 860 mm. The program itself calculates the number of feed unit strokes required to reach the defined length.

Condition: good (used), Cutting angle from/to: 90° - 40°. Opening width vice: 260 mm band speed: 2-stage saw band: 400 x 32 mm motor power: 0,48 / 0,65 kW dimensions: 1200 x 420 x 800 mm weight approx.: 130 kg Equipment: Coolant system without pump Croln Tohufaqsi Nksb

Condition: new, Cutting range round 0°: 150 mm Cutting area square 0°: 150 x 150 mm Cutting area flat 0°: 150 x 165 mm Cutting area round 45°: 115 mm Cutting area flat 45°: 115 x 130 mm Cutting area round 60°: 60 mm Cutting area flat 60°: 70 x 70 mm Working height: 700 mm Saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds: 40 - 80 m / min Motor power: 0.75 kW Voltage: 400 V Machine dimensions: 1200 x 750 x 1250 mm Weight approx.: 85 kg Features: - Saw arm can be tilted up to 60 - With 2 saw blade speeds for optimum adaptation to the workpiece - Ideal for cutting pipes, profile material and solid material made of VA, iron, etc. - Generously dimensioned saw arm for low-vibration work - Lowering of the saw arm via hydraulic lowering cylinder - Low-noise due to stable design - Micro limit switch switches off at the end of the cut - Quick-clamping vice for quick and easy workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - Incl. base frame Scope of delivery: - Bi-metal saw blade 1735 x 13 x 0.65 mm, 6/10 tpi - Quick-clamping vice - Material stop - Hydraulic lowering cylinder - Motor protection switch - Automatic switch-off at the end of the cut Csln Tjilk E Doi Nksrb - Underframe

Condition: new, Ideal for cutting pipes, profile material and solid material made of VA, iron, etc. for industrial applications Technical data: Cutting range: round 0°: 235 mm square 0°: 200 x 200 mm flat 0°: 280 x 190 mm round 45° R: 190 mm square 45° R: 170 x 170 mm flat 45° R: 190 x 180 mm round 60°: 120 mm square 60°: 120 x 120 mm flat 60°: 120 x 115 mm round 45° L: 175 mm square 45° L: 145 x 145 mm Cutting speed, infinitely variable: 20 - 90 m/min Saw blade: 2645 x 27 x 0.9 mm Working height, approx.: 990 mm Coolant pump: 100 W Saw motor: 1.5 kW Connection: 230 V Dimensions (LxWxH), approx.: 1600 x 1100 x 1500 mm Weight, approx.: 295 kg Equipment: - Double mitre saw with swivel saw arm from left -45° to right +60° - Generously dimensioned cast saw arm for low-vibration work - Infinitely variable sawing speed for ideal adaptation to the workpiece - Hydraulic lowering cylinder, infinitely adjustable - Quick-clamping vice for quick and easy workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - CE/IEC, German documentation and German service Scope of delivery: - BiMetal saw blade - Band tension adjustable via pressure gauge - Carbide guides Crolneqbr Suo Ti Nksb - Quick clamping vice - Material stop - Coolant device incl. pump - Hydraulic lowering cylinder - Motor protection switch - Automatic switch-off at the end of the cut - Underframe