Year of construction: 1986, condition: good (used), machine/vehicle number: 26647, Technical data: - Roll diameter 420 mm - Overhang 410 mm - Max. passage height 265 mm - Table size 600 x 600 mm - Table, left and right, swivels by 15 / 30° each - Table height from the floor 1020 mm - Saw blade length 3150 - 3260 mm - Saw band width 3 - 16 mm Codect Nm Uepfx Agtsrg - 8 cutting speeds 12 - 375 m/min - Drive 400 V / 1.1 / 1.7 kW - Weight approx. 650 kg - Space required approx. W 900 x H 1900 x D 1000 mm - Includes: - Saw blade welding device in the machine stand - Grinding wheel and lamp - Shear, air pump and lighting

Year of construction: 1992, condition: good (used), machine/vehicle number: 29-0288, Offer 04612 Technical specifications: - Cutting range at 90° (round): 260 mm - Cutting range at 90° (flat): 450 x 240 mm - Cutting range at 45° (round): 230 mm - Cutting range at 45° (flat): 240 x 200 mm - Machine is mounted on the original rotating table - Saw band dimensions: 3660 x 25 x 0.9 mm - Cutting speeds: 20 / 35 / 50 / 70 m/min - Hydraulic lifting and lowering of the saw frame Crsdpegin Ndjfx Agtjg - Cutting pressure, infinitely adjustable: 0 - 10 m/min - Total drive power: 400 V / 0.8 kW - Coolant system - Space requirement: approx. W 2100 x H 1200 x D 1000 mm - Weight: approx. 500 kg

Condition: new, Year of construction: 2025, functionality: fully functional, power: 1.1 kW (1.50 HP), input voltage: 400 V, type of input current: three-phase, total height: 1,700 mm, total length: 1,400 mm, total width: 685 mm, overall weight: 200 kg, cutting range round steel at 45°: 145 mm, cutting range round steel at 90°: 225 mm, cutting range square steel at 45°: 150 mm, cutting range square steel at 90°: 190 mm, saw band length: 2,480 mm, saw band width: 27 mm, Saw band --- 2480 x 27 x 0.9 mm Saw speed --- 45 - 90 m/min Motor --- 400V - 1.1 kW Weight --- 200 kg Cutting capacity at 0° ----- 225 mm / 190 x 190 mm / 245 x 150 mm Cutting capacity at 45° ----- 145 mm / 150 x 150 mm / 190 x 150 mm Cutting capacity at 60° ----- 90 mm / 90 x 90 mm / 120 x 90 mm INCLUDED * Adjustable material clamp * Graduations up to 60 degrees * Automatic shut-off * Low-noise electric motor * Enclosed worm gear transmission * Hydraulic pressure control * CE emergency stop * Coolant pump Cjdpfoga Tzqex Agtorg * Base cabinet * Quick-release clamp * M42 Bi-metal saw band

Condition: good (used), Year of construction: 1992, machine/vehicle number: 5164, Offer 23148 Technical data: - with hydraulic clamping and feed device - Cutting range round 320 mm - square 300 x 300 mm - large cut-off length with single stroke up to 400 mm - Multiple feed up to 10 x 400 mm - Saw blade dimensions 3660 x 25 x 0.9 mm - Infinitely variable cutting speed 20 - 100 rpm - Hydraulically infinitely variable feed speed - Coolant device - Material support height 720 mm - Saw band - Drive 400 V / 2.5 kW - Space requirement approx. W 1950 x H 1250 x D 1500 mm - Weight approx. 1000 kg Crodpfx Agsq Evn Eetjg

Condition: good (used), Semi-automatic cold circular sawing machine with roller table. Crsdpfx Aoq U N Rysgtog

Condition: good (used), Year of construction: 1981, machine/vehicle number: 11790-81, Offer 23402 Codpfx Asri R Azogterg Technical data: - Roller diameter 420 mm - projection 400 mm - max. passage height 325 mm - Table size 600 x 600 mm - Table can be tilted left / right 10° / 45° - Table height from floor approx. 1030 mm - Saw blade length 3450 - 3640 mm - Band width max. 25 mm - infinitely variable band speed 15 - 1500 m/min - Drive 400 V / 1.5 kW - Weight approx. 500 kg - Space requirement approx. W 800 x H 1850 x D 1000 mm - with: - IDEAL saw blade welding unit - lighting

Condition: good (used), Stock number: 2839 Crjdpfxjrpl Sue Agtog Make: WMW Year of manufacture: Machine number: 13539 Type / Model: SgB 400 Cutting range round: 420 mm square: 380 x 380 mm Saw blade: 700 x 55 x 2.5 mm Sawing speed: 42 / 52 / 68 / 84 strokes/min (?) Clamping jaws: fixed 280 x 230 mm movable 230 x 230 mm Clamping jaw opening: 450 mm electrically clamping Connection: 3.6 kW Accessories/equipment: Condition: good Weight: 1,4 t Dimensions: 1,900 x 700 x 1,400 mm

Condition: good (used), Manufactured by: Stanko Tilt table Crodpfx Aov S Ukvsgtsg Table size: 560 x 560 mm Design: 400 mm Maximum cutting height: 240 mm Belt length: 3150 mm Adjustable speed

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, saw blade diameter: 120 mm, O F F E R Codpfx Aeyub N Uegtsrg We can offer you the following ex stock, subject to prior sale and errors excepted, without obligation: EISELE Vertical cold circular saw with mitre cut Type VMS II – 350 PV Year of manufacture 2010 _____ Max. saw blade diameter 350 mm Saw blade speeds 40 / 80 rpm Workpiece diameter 90 mm Swivel range of saw table 0 – 90 degrees Continuously adjustable pneumatic feed 0 – 10 (?) Approx. weight 350 kg Features: • Adjustable workpiece length stop, mounted on the right - Max. adjustable length: 500 mm • Pneumatic workpiece vice – clamping width 160 mm • Minimum quantity coolant system (MMKS) for saw blade • Adjustable depth stop

Condition: good (used), Year of construction: 2000, Offer 24477 Technical Specifications: - Cutting range at 90° round: 220 mm - flat: 250 x 100 mm - square: 170 x 170 mm - Cutting range at 45° round: 150 mm - flat: 150 x 150 mm - Mitre adjustment left and right - Saw blade dimensions: 2890 x 27 x 0.9 mm - Cutting speeds: 40 + 60 m/min - Hydraulic lowering of the saw frame - Infinitely adjustable cutting pressure: 0 - 10 m/min Codey H Dmhopfx Agtsrg - Total drive power: 400 V / 1.5 kW - Installation space approx.: W 1500 x H 1000 x D 650 mm - Weight approx.: 250 kg

Condition: good (used), Year of construction: 1974, Offer 26003 Technical Data: - Saw blade diameter: up to 370 mm - Cutting capacity at 90°: - round: 110 mm - square: 100 mm - rectangular: 280 x 40 mm or 240 x 85 mm - Cutting capacity at 45°: - round: 110 mm - square: 100 mm - rectangular: 220 x 40 mm - Mitre adjustment left and right: each 0 - 90° Crodpey Nlnxofx Agtog - 2 cutting speeds: 13 + 26 m/min - Drive: 380 V / 1.2 / 1.8 kW - Saw blade feed rate hydraulically, steplessly adjustable - Coolant system - Required space approx. W 800 x H 1850 x D 1100 mm - Weight approx. 750 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, control type: CNC control, actuation type: pneumatic, rotational speed (max.): 3,000 rpm, overall weight: 640 kg, Equipment: CE marking, documentation/manual, The MACC TA 400 A CNC is an automatic circular saw designed for cutting aluminium and non-ferrous materials in industrial serial production. Main Technical Data Parameter Value Machine Type Automatic CNC circular saw for aluminium Blade Diameter Ø 400 mm Blade Bore 32 mm Motor Power 2.2 kW Power Supply 3 × 400 V Credpoy Uvqzsfx Agteg Blade Speed 3000 rpm Vice Opening 180 mm Cooling System Emulsion cooling system Clamping System 2 pneumatic vices Weight Approx. 510–640 kg Machine Dimensions Approx. 3450 × 1700 × 1420 mm Cutting Capacities at 90° Profile Type Capacity Solid Round Material 60 mm Tube / Round Profile 140 mm Square Profile 110 × 110 mm Rectangular Profile 180 × 100 mm

Condition: good (used), Year of construction: 1994, operating hours: 1,000 h, functionality: fully functional, saw blade diameter: 550 mm, cutting range round steel at 90°: 200 mm, type of input current: AC, rotational speed (min.): 2,800 rpm, rotational speed (max.): 2,800 rpm, overall weight: 1,000 kg, cutting diameter: 200 mm, Barely used aluminum circular saw with length measurement on the infeed conveyor. BRAND: ELUMATEC. Csdpfxszavzvj Agtjrg DRIVE: VIA AIR COMPRESSOR. Saw blade diameter: 550. Maximum cutting length: 200 mm at 90 degrees. Offer includes infeed conveyors and length measurement system. A stable loading device is available.

Condition: good (used), Year of construction: 1998, machine/vehicle number: 1116-147-739, Offer 26155 Technical data: - Electric hydraulic lifting and lowering of the saw bow - Saw blade dimensions: 400 x 30 x 1.5 mm - Cutting range at 90°: - Round: approx. 210 mm Crjdpfx Aozf A Dyogtog - Flat: approx. 240 x 190 mm - Square: approx. 210 x 210 mm - Cutting range at 45°: - Round: approx. 150 mm - Flat: approx. 150 x 100 mm - Flat: approx. 130 x 210 mm - Square: approx. 145 x 145 mm - Adjustable stroke speeds and cutting speeds - Stroke rates: 62 / 125 m/min - Average cutting speed: 16 / 32 m/min - Miter adjustable vise with opening width up to 260 mm - Electric coolant system - Drive: 400 V / 1.1 kW - Space requirement: approx. W 500 x H 1250 x D 1200 mm - Weight: approx. 180 kg

Condition: good (used), Year of construction: 1995, machine/vehicle number: 117848, Offer 26171 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90°: - Round 130 mm - Square 120 mm - Rectangular 300 x 40 mm - Or 240 x 85 mm - Cutting range at 45°: - Round 130 mm - Square 110 mm - Rectangular 245 x 40 mm - Miter adjustable left and right, each 0 - 90° - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.8 / 2.7 kW Cedpfjzibdgex Agtorg - Feed rate of the saw blade, hydraulically steplessly adjustable - Vertical hydraulic metal clamping device + 2 hydraulic horizontal metal clamping devices - Coolant system - Infeed – roller conveyor with storage area 5000 mm - Outfeed – roller conveyor with measuring stop and positioning control 4000 mm - Space required approx. W 900 x H 1950 x D 1200 mm - Weight approx. 850 kg

Condition: used, Year of construction: 1999, machine/vehicle number: 2632, Item No. 24108 Credpfjzibxwsx Agteg Technical data: - Saw blade dimensions: up to 300 x 2.0 x 40 mm - 2 saw blade spindle speeds: 40 + 80 1/min - Cutting range: at 90° - Round: 100 mm - Flat: 120 x 85 mm - Miter adjustable: - Left: up to 45° - Right: up to 30° - Material clamping device - Drive: 400 V / 1.0 / 1.2 kW - Space requirement: approx. W 600 x H 800 x D 700 mm - Weight: approx. 180 kg

Condition: used, Year of construction: 2007, machine/vehicle number: 0003000421, functionality: unexamined, AUTOMATIC BAND SAW Cjdsy Ndnwjpfx Agtjrg

Condition: excellent (used), Year of construction: 1999, O F F E R We can offer you, subject to prior sale and errors excepted, the following ex stock, without obligation: EISELE Circular Sawing Machine for Straight and Mitre Cuts Model: VMS 370 Year of manufacture: 2000 Max. saw blade Ø: 370 mm Cutting capacity: - Pipes approx. up to 130 mm - Flat material: 200 x 100 / 140 x 100 mm - Solid material (square): 120 mm Note: For mitre cuts, cutting capacities may be somewhat reduced—up to max. 140 mm. Saw carriage stroke, manual, vertical approx.: 200 mm Saw blade speeds: 17–34 rpm Saw blade drive approx.: 2/2.6 kW Total drive approx.: 3 kW – 380 V – 50 Hz Weight approx.: 500 kg Accessories/Special features: • Adjustable saw head for mitre cuts at 30° / 45° / 90° via scale • Pole-changeable three-phase motor with max. 2.6 kW drive • Manual feed of saw carriage with long, adjustable lever • Manual workpiece vice, jaw width approx. 120 mm • Integrated coolant system with chip collection tray • Roller conveyor material feed approx. 2,000 mm • New saw blade installed, 2 spare saw blades included Cedjx A H Rrspfx Agterg • Electrical system recently overhauled Ideal machine for locksmithing and metalworking shops. Condition: Very good – ready for demonstration – very smooth running Delivery: Ex stock, as inspected Payment: Net, strictly after receipt of invoice We look forward to your order. We also have larger EISELE cold circular saws and other (band/hacksaw/cold circular) saws in stock. Further saw machines always available—please enquire.

Condition: good (used), Year of construction: 1990, machine/vehicle number: 103 2583310, Offer 25326 Technical Data: Crjdpfsx Sxx Aox Agteg - Saw blade diameter up to 400 mm - Cutting capacity at 90°: - Round: 130 mm - Square: 120 mm - Rectangular: 300 x 40 mm or 240 x 80 mm - Cutting capacity at 45°: - Round: 130 mm - Square: 110 mm - Rectangular: 245 x 40 mm - Mitre adjustment left & right each 0–90° - 2 cutting speeds - Drive: 400 V / 1.26 / 2.5 kW - Saw blade feed rate hydraulically infinitely adjustable - Coolant system - Required space approx. W 1100 x H 1980 x D 1210 mm - Weight approx. 950 kg - Infeed and outfeed roller conveyors with length stop, each 6000 mm

Condition: good (used), Year of construction: 1998, machine/vehicle number: 19263.98, Offer 24149 Technical data: - Cutting area at 90° round 320 mm - flat 300 x 270 mm - Material feed stroke up to 500 mm - Multiple strokes unlimited - Remaining piece length in automatic mode 125 mm - Saw band dimensions 3900 x 27 x 0.9 mm - Cutting speed 17 to 106 m/min - Hydraulic lifting - lowering of the saw frame - Upper stroke limit of the saw frame - Cutting pressure continuously adjustable 0 - 10 m/min - Hydraulic material vice - Chip conveyor - Saw band cleaning brush - Coolant device Codpfx Aevvim Togtorg - Drive 400 V / 2.2 kW - Space requirement approx. W 2300 x H 1700 x D 2600 mm - Weight approx. 1700 kg - Roller conveyor 2000 mm

Condition: good (used), Year of construction: 2009, machine/vehicle number: 87376, Offer 23330 Technical Data: - Semi-automatic sawing machine with hydropneumatic feed - Saw blade feed – vise - Saw blade diameter: 350 mm - 2 saw blade spindle speeds: approx. 40 + 80 rpm - Cutting capacity at 90°: round 110 mm; flat 120 x 80 mm - Cutting capacity at 45°: round 80 mm; flat 80 x 80 mm - Mitre adjustment: left up to 45°, right up to 45° - Infinitely variable saw blade feed - Pneumatic material vise - Electric foot switch - Pneumatic connection: 6 bar - Drive: 400 V / 1.4 / 1.8 kW - Coolant system Cedoxx R Tiepfx Agtsrg - Space required: approx. W 1000 x H 1500 x D 1200 mm - Weight: approx. 300 kg

Condition: new, Year of construction: 2026, Automatic and manual operation – continuous operation or trigger control possible Cedpfx Agsyi Uq Ujtsrg Hydraulic arm drop adjustment – ​​smooth feed control without the risk of overload Cutting angle range: -45° to +60° – quick adjustment without disassembling the material Powerful 1500/1100 W motor (2/4-pole) – high performance even with thick profiles 2 belt speeds: 34 and 68 m/min – adapted to the material type Stable construction – 285 kg – zero vibration, high precision Quick clamp vice – quick material changeover in mass production Pump-based cooling system – extended belt life, improved cutting quality Automatic shut-off after cutting 400 V | 3-phase power supply | 50 Hz Motor power 1500 / 1100 W Belt speed 34 / 68 m/min Belt dimensions 2740 × 27 × 0.9 mm Belt pulley diameter 305 mm Cutting angle range 45°L | 30°L | 15°L | 0° | 15°R | 30°R | 45°R | 60°R Coolant pump 45 W Coolant tank capacity 16 l Net weight 285 kg Noise level 68–71 dB

Condition: good (used), Year of construction: 2002, functionality: fully functional, Feature | Technical Data Machine Type | Fully automatic CNC pipe circular saw Cutting Type | Straight cut (90°) Pipe Diameter | Ø 8–80 mm (partially specified as 10–80 mm) Square Profiles | 10 × 10 to 70 × 70 mm Rectangular Profiles | Up to 80 × 70 mm Codpfxezqdlcj Agtorg Maximum Bar Length | 6,500 mm Minimum Bar Length | 2,000 mm Maximum Cutting Length | 4,500 mm Minimum Cutting Length | 50 m

Condition: used, Original roller conveyor / measuring stop for LTS 400 and LTS 460, available in 2 m and 3 m versions. Cjdpfszra Rkjx Agterg

Condition: ready for operation (used), Year of construction: 1982, Band saw with miter cutting device, manufacturer: HESKA, type: HSE 260, year of manufacture: 1982. Cedpfxezictcs Agterg The machine has been partially overhauled and includes a support stand, machine documentation, and a coolant system. Sawing capacity for round stock: max. 260 mm.