Used milling machines - vertical for sale (64)

Condition: good (used), Year of construction: 2001, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, CNC milling machine KUNZMANN - WF7/3 X-Axis: 600mm Y-Axis: 400mm Z-Axis: 400mm Table Length:650mm Table Width: 400mm Table load: 250 Stroke pinole:40mm Length: 2800mm Width: 2400mm Hfslhccqewq Ndgoqsg Height: 2100mm Weight: 2000kg

Condition: good (used), Year of construction: 2005, travel distance X-axis: 560 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 2,400 m/min, feed rate Y-axis: 2,400 m/min, feed rate Z-axis: 2,400 m/min, table width: 450 mm, table length: 950 mm, Fixed table 950 x 450 mm Feeds all direction ISO-40 and 3kW 3 Axis Digital Read Out Systsem CE-Safety  Coolant system with semi closed lower base  X-Axis: 560mm Y-Axis: 320mm Z-Axis: 400mm Table Length: 950mm Table Width: 450mm Table load: 350 Spindle speeds: 2240Rpm Hslhexdltbjccqqofg Feed rate X-Axis:2400mm/min. Feed rate Y-Axis:2400mm/min. Feed rate Z-Axis:2400mm/min. Stroke pinole: 0 - 95mm Length: 1800mm Width: 1600mm Height: 1900mm Weight: 1700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, Milling machine Saimp model FU-P2. Machine complete with axis display and dividing head. Used. Hfjlhccoy N T Umsqqjg

Condition: ready for operation (used), Gorton milling machine X-axis: 600mm Y-axis: 300mm Z-axis:300mm Hfolhcjtt Stkocqqog RPM: Max 4666 RPM Cone: 40mm Max drilling depth: 90mm Bed dimensions: 850x240 mm Transport dimensions: 150x135x210 cm (LxWxH) Location: Hamont-Achel, Belgium Gorton milling machine X axis: 600mm Y axis: 300mm Z axis: 300mm Speed: Max 4666 RPM Cone: 40mm Max drilling depth: 90mm Bed dimensions: 850x240 mm Transport dimensions: 150x135x210 cm (LxWxH) Location: Hamont-Achel, Belgium Gorton-Fräsmaschine X axis: 600 mm Y-axis: 300 mm Z-axis: 300 mm Geschwindigkeit: Max. 4666 U/min Cone: 40 mm Maximum drilling depth: 90 mm Bettabmessungen: 850x240 mm Transport dimensions: 150x135x210 cm (LxWxH) Standort: Hamont-Achel, Belgium

Condition: refurbished (used), Year of construction: 2011, operating hours: 11,200 h, functionality: fully functional, machine/vehicle number: 5748, spindle speed (max.): 42,000 rpm, HSC600-5axis, high-speed milling machine Control Heidenhain TNCi530 Travels XxYxZ 650x550x400mm Travels BxC B100+/-, C endless Clamping table diameter 410mm Distance table/spindle nose 600mm Workpiece weight max. 250kg Spindle speed max. 42000rpm Spindle power S1/S2 10/13KW Rapid traverse 50m/min Turning speed B/C 80/80rpm. Equipment: Control Heidenhain TNCi530 HVC 140 Step Tec milling spindle HSK 40-E tool holder Hfjlhccqenr Hlbjqsg Tool changer 60 places Oil mist extraction system for extracting oil vapors L-CUT 1 dust extraction system Renishaw OMP400 measuring system Manual control panel with handwheel and enabling button External minimum quantity lubrication (MMS) Lubrication and tool cooling EROWA UPC chuck Calibration ball for Kinematopt for spatial compensation Services with Trasport, commissioning on site, training Warranty 6 months after handover

Condition: excellent (used), Year of construction: 2011, operating hours: 5,303 h, functionality: fully functional, machine/vehicle number: 5847, travel distance X-axis: 600 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 360 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 42,000 rpm, spindle speed (min.): 5 rpm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, table width: 550 mm, table length: 450 mm, type of input current: three-phase, table load: 350 kg, overall weight: 5,500 kg, workpiece weight (max.): 350 kg, input frequency: 50 Hz, controller manufacturer: Heidenhain, controller model: TNCi530i, operating hours of spindle: 5,303 h, Equipment: documentation/manual, rotational speed infinitely variable, High-Speed Milling Machine HSC500/3 HSC500 - 3 Axis Annual maintenance Spindle operating hours HVC140: 5303h Travel range X/Y/Z: 700/590x580x360 mm Actual machining area: 580x530 mm Table area: 550x450 mm Workpiece weight: 350 kg Distance table to spindle nose: 160/520 mm Machine dimensions (W x D x H): 3200x2250x3000 mm Rapid traverse: 30 m/min Equipment: Heidenhain iTNC530i control Prepared for dust extraction Tool changer with 60 stations, HSK40 (Minimum quantity lubrication) Adjustable air nozzle Tool length measurement with Blum laser Workpiece measurement with Renishaw OMP-400 touch probe Hfslhcoy R U Azecqqjg Additional lighting Electronic handwheel with enabling switch Milling spindle: Steptec HVC140-15/42 42,000 rpm, 5303 operating hours MMS Lubtools 3 kW cooling system Loading door at rear of machine Length compensation, temperature compensation for accuracy package Warranty: 3 months (milling spindle excluded) Transport, commissioning, training Options on request

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm tool taper SK 40 DIN 69871 table surface area 700 x 500 mm max. table load 500 kg T-slots 7x 14 x 63 mm number of toolpositions 60 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm change-time tool to tool 1,6 sec change-time chip to chip 8,0 sec rapid traverse 24 m/min Feed force ( X / Y / Z ) 4,5 kN Helhccqoy E Tv Asqjfg feed speeds 1 - 24.000 mm/min total power requirement 26 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Vertical DECKEL MAHO - DMU 50 - 3 Axis - only ca. 8.097h Spindle-Hrs. - Backup package for power outages - DXF import - incl. workbench - incl. tool cabinet - incl. cabinet for SK 40 tool holders - incl. approx. 63 SK 40 tool holders

Condition: used, Milling machine Type: MEC 300 Year: 2002 Serial number: M0004/02 Control: Selca s3045 Helhccoy Sp Nrjqqjfg

Condition: good (used), Year of construction: 2003, CNC milling machine RECKERMANN 1300 Kombi, No. 8112, year of manufacture 2003, spindle speed 32 - 1,400 rpm, 20-position tool changer (SK40), HEIDENHAIN control Hfelhccqsy N Tp Rjqjg

Condition: used, Year of construction: 1985, functionality: limited functionality, machine/vehicle number: WW 12 24 2292, travel distance X-axis: 160 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 20,000 rpm, rotational speed (max.): 20,000 rpm, For sale is a classic precision milling machine from Kern Microtechnik, specialized in micro-machining and fine mechanics. This machine stands out for its compact design and the exceptionally high inherent accuracy characteristic of Kern machines. Technical Data & Features Model: Kern 10/16 (Type WW 12) Control: Heidenhain TNC 135 Travel Paths: X-axis: 160 mm Y-axis: 100 mm Z-axis: 200 mm 4th / 5th axis included Spindle: High-frequency spindle (HF) for speeds up to approx. 30,000 – 40,000 rpm Year of manufacture: approx. 1984–1986 (serial number 229) Hjlhcoy Nbcrscqqofg Condition & Particularities Visual condition: The machine is in a well-maintained state considering its age, with normal signs of wear to the paintwork. Important note: The automatic tool changer is currently defective. However, the machine can still be loaded manually or repaired by skilled technicians or hobbyists. Fields of application: Perfectly suited for the watchmaking industry, jewelry manufacturing, electronics, or demanding model making.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: NX1102194, milling spindle speed (min.): 50 rpm, milling spindle speed (max.): 3,500 rpm, Equipment: lighting, SPECIFICATION Table size 1244 x 230mm Longitudinal traverse 700mm Cross traverse 300mm Vertical traverse 405mm Quill travel 125mm Quill feeds 0.045-0.086mm/rev Quill diameter 86mm Quill taper R8 Spindle motor 2.2kW Spindle speeds (inf. Variable) 50-3500rpm Weight 1200Kg Machine in Metric execution MACHINE EQUIPPED WITH Sino 3 axis DRO system Longitudinal power feed One shot centralised lubrication system Low voltage halogen worklight Hfjlhcjy H Ix Uocqqeg Spindle guard Coolant system

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 9,000 rpm, spindle speed (min.): 20 rpm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, table width: 500 mm, table length: 700 mm, rotational speed (max.): 9,000 rpm, rotational speed (min.): 20 rpm, table load: 200 kg, overall weight: 3,500 kg, workpiece weight (max.): 6 kg, space requirement width: 2,300 mm, space requirement length: 2,300 mm, space requirement height: 2,000 mm, For sale: Deckel MAHO DMU 50 T. Year of manufacture: 2001. The machine is equipped with the popular and powerful Heidenhain MillPlus / 3D path control, Hfolsy Raf Ushccqqsg workshop-serviced and immediately ready for operation. 3-axis base machine with manual swivel rotary table [3+2 axes]. Available from calendar week 21. Can be inspected under power at the location near Salzburg, Austria, immediately. Condition: Very good (low operating hours for its age) Incl. accessories. Machine weight: 3,500 kg

Condition: used, X Axis 30.0 in 762 mm Y Axis 16.0 in 406 mm Z Axis 16.0 in 406 mm Read for inspect Hslhccqsiypzdjqofg Ready for delivery

Condition: used, Year of construction: 2017, operating hours: 2,115 h, functionality: fully functional, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 50 rpm, rapid traverse X-axis: 8,500 m/min, rapid traverse Y-axis: 8,500 m/min, rapid traverse Z-axis: 7,000 m/min, overall weight: 2,708 kg, We offer this used TOS OLOMOUC FNG-40 CNC A milling machine, manufactured in 2017. Type: FNG-40 CNC A Serial number: 404 100 008 Hfelhccsy Rbb Rjqqjg Year of manufacture: 2017 Weight: 2708 kg If you have any further questions or require additional information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 1989, x-travel 1500 mm y-travel 1000 mm z-travel 700 mm table: 1500 x 1000 mm control FIDIA Hfelhccqsu Id N Deqjg weight of the machine ca. 11 t

Condition: good (used), x-travel 380 mm z-travel 140 mm dist. cutter spindle - workpiece spindle 370 mm distance spindle - column 163 mm table-size 630 x 150 mm quill stroke 40 mm milling head -swivable 360 Grad spindle turning speed range 120-2000 U/min table feed 35/65/170 mm/min voltage 380 V weight of the machine ca. 130 kg total power requirement 0,5 kW dimensions of the machine ca. 0,91 x , 0,68 x 1,80 m Hfjlhccqsyz Dg Djqjg Includes 32-piece collet set Includes base cabinet with key Includes small parts Includes operating instructions

Condition: good (used), Vertical Drilling and Milling Machine Stock number: 3083 Manufacturer: Sempuco Greiz Year of manufacture: 1956 Type / Model: Midrimat 3 Machine number: 3545 Travel (x-y-z): 320 - 150 - 350 mm Spindle taper: MT3 Spindle feed: 0.042 mm/rev Quill stroke: 60 mm Table size: 660 x 310 mm Clamping surface of the table: 450 x 200 mm Head travel: 150 mm Speed range: 190 to 2,100 rpm Hjlhey Hflroccqqjfg Feed rate: 11.2 to 125 mm/min Spindle taper: MT3 Connection: 1.1 kW Accessories/Equipment: Condition: good Weight: 0.65 t Footprint: 800 x 600 mm Dimensions: 900 x 1,100 x 1,700 mm

Condition: good (used), Metal milling machine with some cutters included X-axis approx. 800 mm Y-axis max. approx. 300 mm Hfjloxvll Iohccqqog Z-axis ? Still a heavy, stable cast iron machine

Year of construction: 1972, condition: excellent (used), machine/vehicle number: 2995, table mounting size: 300 x 1100 mm movement x: 780 mm movement y: 250 mm movement z: 410 mm spindle taper: SK 40 tailstock stroke: 100 mm spindle turning speed range: 31,5 - 1400 rpm carriages longitudinal and cross: 12,5 - 630 mm/min carriages vertical: 6,3 - 315 mm/min electrical connection: 380 V, 5,5 kW Hjlhjh I Du Uoccqqsfg space needed: 1770 x 1500 x 2050 mm weight: ca. 2200 kg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 7HAA047, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 14,000 rpm, spindle speed (min.): 140 rpm, quill diameter: 65 mm, rapid traverse X-axis: 4,200 m/min, rapid traverse Y-axis: 4,200 m/min, rapid traverse Z-axis: 4,200 m/min, table width: 550 mm, table length: 1,000 mm, table load: 550 kg, overall weight: 6,500 kg, workpiece weight (max.): 550 kg, MITSUBIISHI M-V4050 Vertical Machining Centre, new 2005, ex aerospace enviroment. Hslhsyr Nh Heccqqefg Fanuc 16iMB control, with hand controller, 30 position auto tool changer, BT 40 spindle, 14,000 rpm, renishaw probe, thru spindle high pressure coolant, chip conveyor. XYZ axis travels 800 x 510 x 460 mm, table size 1000 x 550 mm. Machine is in excellent condition. Vice and tooling not available.

Condition: good (used), Year of construction: 2001, The machine will be delivered including a new replacement spindle. Digma HSC 500, year of manufacture 2001, Heidenhain iTNC 530 control, travel X/Y/Z 500/400/350 mm, spindle speed up to 42,000 rpm, tool holder HSK 40, laser diameter measurement, oil mist lubrication system, Hslhccqoy A H Tpoqefg extraction for graphite machining, 3D infrared measuring probe, The tool cannot be released from the spindle; according to the service technician, this is not a spindle problem but a hydraulic issue. A new HSC replacement spindle is included.

Condition: used, Technical details: x-travel: 762 mm y-travel: 382 mm z-travel: 419 mm tool taper: Sk 40 table surface area: 1070 x 230 mm range of revolution per miute: 60 - 4.200 U/min Helhcceva Evfsqqsfg feed continuous: 0,038/0,073/0,120 in 3 steps mm/min spindle stroke: 120 mm spindle taper: Iso 40 spindle head swivable left - right: 90 ° weight of the machine ca.: 1600 kg machine dimensions LxWxH: 1,8 x 1,5 x 2,15 m This machine is currently in the technical department. *

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: SI 9141, travel distance X-axis: 800 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 1,000 rpm, spindle speed (min.): 31 rpm, quill travel distance: 120 mm, total height: 2,000 mm, total width: 1,800 mm, total length: 1,750 mm, table width: 300 mm, table length: 1,100 mm, The milling machine is fully functional. Accessories are included in the price. No warranty is provided for the machine. Hjlsyzpy Ajhccqqefg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 111146, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 10,000 rpm, controller model: Heidenhain 530, TECHNICAL DETAILS Travel X-axis: 1,100 mm Travel Y-axis: 610 mm Travel Z-axis: 610 mm Spindle nose to table: 120–730 mm Machine table: 1,250 x 610 mm T-slots in table: 5 T-slot width: 18 mm T-slot spacing: 100 mm Spindle speed: 60–10,000 rpm Torque: 332 Nm Power: 13 kW Spindle cooling: Oil-cooled Rapid traverse X/Y/Z: 32 m/min Feed rate: 1–12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool holder: SK40 Pull stud: DIN 69871/72 Tool changer: 30 stations Tool-to-tool change time: 1.5 s Tool weight: max. 7 kg Tool diameter: max. 76 mm Tool diameter with adjacent station free: max. 140 mm Tool length: max. 300 mm MACHINE DETAILS Control: Heidenhain 530 Compressed air: 3/8", 6–8 bar Power supply: 400 V / 75 A / 35 kVA Hydraulic oil: R32 (ISO 32) Central lubrication: R68 (ISO 68) Coolant tank: 250 l Hjlhccqsyzxz Noqsfg Guides X/Y/Z: Linear 45/45/45 mm Machine bed: Cast iron Machine weight: 7,500 kg EQUIPMENT IKZ 22 bar (internal coolant supply) Tool changer with 30 stations Oil-cooled spindle Central lubrication Coolant tank Linear guides X/Y/Z Chip conveyor Handwheel Note: The machine is sold without tools and vise.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 350 mm, feed length Z-axis: 350 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, spindle speed (max.): 10,000 rpm, spindle speed (min.): 50 rpm, total height: 2,500 mm, total width: 5,200 mm, total length: 2,700 mm, table width: 375 mm, table length: 600 mm, table height: 120 mm, type of input current: three-phase, table load: 250 kg, overall weight: 6,000 kg, input voltage: 400 V, workpiece weight (max.): 250 kg, distance table to spindle center: 500 mm, Equipment: rotational speed infinitely variable, 1997 Heckler & Koch BA 18 – 4 Axis CNC Machining Centre – Siemens Sinumerik Machine Manufacturer: Heckler & Koch Model: BA 18 Machine Type: 4 Axis Machining Centre Year: 1997 Condition: Old but working well High-Precision German CNC Machining Centre for Sale in Ireland Used Machine Tools Ireland is pleased to offer this 1997 Heckler & Koch BA 18 4-Axis CNC Machining Centre, a robust German-built vertical milling and drilling centre renowned for accuracy, reliability, and heavy-duty construction. This machine is equipped with a Siemens Sinumerik CNC control, making it a solid choice for workshops requiring dependable CNC milling with integrated 4th-axis capability. Key Features & Highlights Heckler & Koch BA 18 CNC Machining Centre 4-Axis configuration Siemens Sinumerik CNC control Single spindle version Rigid German construction Automatic tool changer Ideal for precision milling & drilling Suitable for general engineering, toolmaking & production machining Technical Specifications – Heckler & Koch BA 18 (Single Spindle) General Machine type: Vertical Milling & Drilling Centre Axes: 4 Axis Control: Siemens Sinumerik Spindle type: Single spindle Tool holder: SK40 Travels (Programmable Working Area) X-Axis: 500 mm Y-Axis: 350 mm Z-Axis: 350 mm Spindle & Performance Spindle motor power: 9 kW (40% duty) Spindle speed range: Infinitely variable 50 – 10,000 rpm Torque: 50 Nm (40% duty) 35 Nm (100% duty) Power transmission: Toothed belt drive Tool System Tool magazine: Chain magazine Tool capacity: 36 tools Tool change: Automatic Average chip-to-chip time: Approx. 5 seconds Maximum tool weight: 4 kg Maximum tool diameter: 63 mm (125 mm with free auxiliary positions) Maximum tool length: 225 mm Accuracy & Feed Rates Positioning tolerance (VDI/DGQ 3441): 0.020 mm Mean position variation (X/Y): 0.008 mm Feed rates (X / Y / Z): 0 – 25 m/min Feed force per axis: 5000 N Measuring system: Rotary encoder with glass scales Table & Load Maximum table load (including table weight): 250 kg Distance table left/right: 400 mm Table to spindle nose: Max: 500 mm (620 mm without table) Min: 150 mm (270 mm without table) Electrical & Utilities Connection voltage: 3 × 380/220 V, 50 Hz Hjlhsyatkbeccqqjfg Connected load: Approx. 28 kVA Pneumatic supply: Max. 8 bar Sound level at rated operation: Approx. 78 dB(A) Dimensions & Weight Machine dimensions (L × W × H): Approx. 5200 × 2700 × 2700 mm Transport dimensions: Approx. 3600 × 2000 × 2500 mm Machine weight (incl. control cabinet): Approx. 6000 kg Ideal Applications Precision CNC milling Drilling & tapping operations Toolmaking & jig work Small to medium batch production General engineering workshops Why Buy From Used Machine Tools Ireland? Trusted Irish supplier of quality used CNC machinery Machines honestly described & professionally inspected Nationwide & export delivery available Competitive pricing Notes: *Specifications are given in good faith but not guaranteed*