Used Milling machines - univ.conv. 400-499mm X-axis travel for sale (61)

Condition: used, Year of construction: 1996, x-travel 400 mm y-travel 350 mm z-travel 400 mm tool taper SK 40 spindle turning speed range 1,0 - 4.000 U/min feeds 0 - 2000 mm/min quill stroke 60,0 mm table-size 650 x 350 mm T-slots 14 H7 Control TNC 124 engine output 5,5 kW weight 1800 kg Bwolqyeu Sa Uwjx Nhol dimensions of the machine ca. 2000 x 1000 x 2100 mm New price ~ 55.000 euros (!!) Furnishing : - Universal tool milling machine - HEIDENHAIN pattern control TNC 124 - The control panel can be swiveled to the right of the machine - hydraulic tool changer (DIN 69872) - Vertical milling head - SK 40 - X-axis feed .. 0 - 2000 mm / min - Y-axis feed .. 0 - 2000 mm / min - Feed Z-axis .. 0 - 2000 mm / min - Central lubrication, electrical - coolant device - Chip tray - Operating instructions for machine + control Special accessories included: - hydraulic machine vice - many tool holders - HEIDENHAIN HR 410 electronic handwheel

Condition: excellent (used), Year of construction: 1976, x-travel 1100 mm y-travel 700 mm z-travel 500 mm turning speeds 30 - 2066 U/min Bjlqovf Rihjyx Nhowl total power requirement kW weight of the machine ca. 3,2 t dimensions of the machine ca. 2,3 x 2,0 x 1,8 m

Year of construction: 1968, Condition: used, Cover milling machine FP1 with 3 axis digital display 380V Machine no. 37729 120-1900 rpm Travel X-axis:300 mm Travel Y-axis:150 mm Z-axis travel:340 mm Tool holder: MK 4 with tightening thread S 20 x 2 Milling head type:Vertical milling head Table type:Fixed table Table clamping surface:600 x 210 mm T-slot size:12 mm X-axis feed:290 mm Y-axis feed:150 mm Z-axis feed:330 mm Weight:700 kg Cover milling machine FP1 Bwjlqyxjpmrpxe Nhel ID: M100000409

Condition: good (used), x-travel 300 mm y-travel 340 mm z-travel 250 mm total power requirement 1,5 kW weight of the machine ca. 0,8 t From training workshop: Heidenh. 3 axes active digital display Screw vice Bjlqyxeucph Eo Nhswl Vice holder with spindle M.No.:2102-5846

Condition: good (used), Travel X / Y / Z: 475 / 330 / 280 mm Table size W x D: 650 x 250 mm Quill stroke: 60 mm Spindle speed: 63 - 2800 rpm / 12 steps Mounting cone: ISO 30 / DIN 2080, ISO 40 / DIN 2080 Weight: approx. 950 kg Machine size W x D x H: approx. 1100 x 1400 x 1600 mm Spindle bore: 17.8 mm (24.8 mm) Movement range: Longitudinal travel. table: 330 mm Table: 330 mm* 1 handwheel rotation: 5 mm Bsled Dgdysqyx Nhowl Vertical travel: Console: 475 mm* 1 handwheel rotation: 2 mm Transverse travel: Milling spindle carrier head: 400 mm 1 handwheel rotation: 5 mm *These two directions of movement are provided with automatic feed and can be controlled by programs. Shortest cycle time 15 seconds, or 4 program sequences per minute. Reading accuracy at the scale drums: 0.02 mm Main motor: Milling head 2 speeds Engine: 1.1/1.5 kW, 1500/3000 rpm Automatic feeds: Rapid speed motor: 0.55 kW, 1000 rpm Rapid traverse lengthwise: 2500 mm/min Rapid traverse vertical: 1000 mm/min Working feed motor: 0.2 kW max. Control range in longitudinal direction 4 - 500 mm/min Control range in vertical direction: 1.6 - 200 mm/min Coolant device: Engine: 0.15 kW, 3000 rpm Coolant pump capacity: 20 l/min Coolant tank capacity: 30 l

Condition: used, x-travel 400 mm y-travel 200 mm Bolqyx Newb Hzkshowl z-travel 400 mm table surface area 670 x 390 mm spindle taper ISO SK 40 spindle turning speed - stepless 40 x 2500 U/min quill stroke 70 mm total power requirement 2,2 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1,7 x 1,3 x 1,95 m Toolroom milling machine (Ma. No. 8729) with: - 3-axis active digital readout - Universal milling head - Tool table - Steel cover for Z-axis - Chip guard - External control cabinet

Condition: good (used), Year of construction: 1980, For sale: Bolqoq Rfqboyx Nhewl 1 piece milling machine Manufacturer: Kunzmann Type: HF6/2V YEAR OF MANUFACTURE: 1980 For speeds see type plate Table: 700 x 170mm Machine can be inspected in our warehouse in 09599 Freiberg.

Condition: excellent (used), Year of construction: 1999, x-travel 400 mm Bjlqyx Nsunt Ihshjwl y-travel 320 mm z-travel 400 mm Control HEIDENHAIN TNC 410 spindle turning speed - stepless 0 - 4000 U/min quill stroke 60 mm tool taper SK 40 table surface area 650 x 350 mm total power requirement 6,5 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,5 x 1,8 x 2,0 m Electric handwheel HR 410 Probe MP 11, automatic tool measurement TT 120 Cabin, tool holders,...

Condition: used, Year of construction: 2000, Used Kunzmann WF 4/3 universal milling and drilling machine with Heidenhain TNC 124 linear control X/Y/Z travel = 400/350/400 mm Speed 1-4000 rpm Vertical head with 60 mm quill Bwslov R T H Toqyx Nhjl Fixed angle table 650 x 350 mm SK40 spindle with hydraulic tool clamping Accessories: - Electronic handwheel Heidenhain HR 410 - Chip protection cabinet - Machine light - Coolant system - Machine feet The machine is located at our location in 71334 Waiblingen-Beinstein, is immediately available, and can also be inspected. Please register in advance.

Condition: new, Year of construction: 2022, Functionality: fully functional, Kunzmann WF 410M tool milling machine with Heidenhain TNC 128 control. Brand new and CE-compliant! Technical specifications: >> Year of manufacture 2022 Machine no. 411555 >> Milling table clamping area 650 x 375 mm Clamping slots 5 Slot width 14 H 7 Slot spacing 63 mm Maximum load 250 kg >> Speed range 1-4500 rpm >> Feed X, Y, Z axes (infinitely variable) up to max. 5/5/4 m/min >> Travels X/Y/Z: 410/350/450 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 2000 kg >> Dimensions approx.: 2 x 2 x 2 m >> Connected load 13 kVA Accessories and equipment: >> Heidenhain TNC 128 control >> Heidenhain HR electronic handwheel 510FS >> Vertical and horizontal hydraulic clamping Bolqjv Rppksyx Nhswl >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating instructions >> Machine light >> Minimum quantity lubrication >> Counterholder >> Digital display for spindle stroke >> Oriented spindle stop (tapping without compensating chuck) >> Chip protection cabin >> KT 130 edge finder >> Coolant system >> 200 mm rotary table >> Dividing head with 125 mm three- and four-jaw chuck >> 125 mm hydraulic vise About the machine: Offered is a Kunzmann WF 410M tool milling machine, built in 2022, in new condition with a Heidenhain TNC 128 control. The TNC 128 provides numerous dialog-guided cycles with graphic simulation for fast and easy data entry, e.g.: various drilling cycles, thread cutting, bolt circles, hole pattern, rectangular pockets, rectangular tenons, and multi-pass milling of surfaces. A very easy-to-use control system. The machine also has hydraulic clamping for both vertical and horizontal operation. Converting from vertical to horizontal is very easy by folding away the vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and try out the Kunzmann on site with power on.

Condition: good (used), Kunzmann BA 600 CNC machining center with 4 axes Year of manufacture 2000 Travel ranges X 600 mm Y 400 mm Z 600 mm Speed range 50-9000 rpm TNC 426 control system Bwolqyx Njwbglpshjl SK 40 chuck 24-position tool changer With 4 axes Operating hours 1500 Machine comes from a training workshop Price €13,500 plus VAT

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, quill stroke: 60 mm, total height: 2,100 mm, total width: 2,100 mm, total length: 2,300 mm, table width: 450 mm, table length: 750 mm, overall weight: 1,900 kg, workpiece weight (max.): 500 kg, Travel X/Y/Z 400/350/300 mm, spindle spped 1 - 4500 rpm, motor 4,5 KW, spindle ISO 40, control Heidenhain TNC 320, table size 750x450 mm, hydraulic tool clamping, coolant device, spash guard, tool holders, manual Bolqyx Newb Erzjhowl

Condition: used, Year of construction: 1977, x-travel 400 mm y-travel 200 mm Bwelqyxev N N Nnj Nhol z-travel 400 mm spindle taper ISO 40 spindle turning speed range 40 - 2000 U/min surface area 700 x 330 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t

Year of construction: 1991, Condition: good (used), Hermle UWF 802 M tool room milling machine with Hermle HS track control. Machine is in good working condition, under current demonstration ready. Belsdubmkjqyx Nhowl

Condition: good (used), FR Korradi milling machine Type: UW1 X-path: 460 mm Y-path: 260 mm Z-path: 320 mm Max. speed: 1740 rpm Spindle: ISO 40 Bed: 345 x 800 mm Bwolqsq Eh H Ujyx Nhol Dimensions: 130x110x170 cm LxWxH

Condition: like new (used), Year of construction: 2016, Functionality: fully functional, Kunzmann WF 400M tool milling machine with Heidenhain TNC 128 path control. As good as new. CE-compliant!! Technical data: >> Year of manufacture 2016 (demonstration machine delivered in 2019) >> Milling table clamping surface 600 x 375 mm Clamping slots 5 Slot width 14 H 7 Maximum load 250 kg >> Speed range 1-4500 rpm >> Feed up to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min Z axis 4000 mm/min >> Travels X/Y/Z: 410/350/450 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1700 kg >> Dimensions approx.: 2 x 2 x 2 m >> Power consumption 12KVA Accessories and equipment: Bolqyx Nev Ifx Njhowl >> Heidenhain TNC 128 path control >> Hydraulic clamping vertically and horizontally >> Automatic central lubrication >> Electronic handwheel HR410 >> Chip splash guard cabin >> Spindle brake >> Technical documentation, spare parts plans, operating instructions >> Coolant system About the machine: A Kunzmann WF 400M tool milling machine with a Heidenhain TNC 128 control is offered. The TNC 128 provides numerous dialog-guided cycles with graphic simulation for quick and easy data entry, e.g.: various drilling cycles, thread cutting, hole circles, rows of holes, rectangular pockets, rectangular tenons and line cutting of surfaces. This universal milling machine was a demonstration machine built in 2016, it was only sold to a training company in 2019. It is in mint condition. A very easy-to-use control. The machine also has hydraulic clamping vertically and horizontally. Converting from vertical to horizontal is very easy, by folding away the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann was mechanically and electrically tested by us. Take the opportunity to view and try out the Kunzmann on site with power on.

Condition: good (used), Year of construction: 1985, tool taper SK 40 mains voltage 380/220 V Mains frequency 50 Hz weight of the machine ca. 600 kg Milling arbor SK40 x 315 long up to max. Ø27 with bushing Ø42 Return hose 700 long Coolant tank Bwelqyx Nsvt Eg Dshel Capacity 20 l cooling emulsion or cutting oil Cover with coolant pump Removable for refilling and cleaning

Condition: new, – ISO40 – 115/1750 V – Table 800 x 240 mm – Automatic feed on the X, Y, and Z axes. – Fast Bweloqpgl Aoqyx Nhol – Digital readout on the X, Y, and Z axes. – Milling head can be rotated – Cooling – Lightening – Protective cap – Emergency stop – Documentation – 400 V

Condition: used, Year of construction: 1981, Technical details: x-travel: 400 mm y-travel: 420 mm z-travel: 380 mm table surface area: 710 x 400 mm max. table load: 120 kg range of revolution per miute: 45 - 2240 / 18 step U/min feed continuous: 6,3 - 600 / 2 steples mm/min quill stroke vertical: 100 mm quill stroke: horizontal: 100 mm spindle taper: vertical/horizontal: SK 40/SK40 spindle head swivable left - right: 90 ° distance table/horizontal spindle: min./max.: 200 / 325 mm distance table/vertical head: min./max.: 150 / 730 mm total power requirement: 5,5 kW weight of the machine ca.: 1,95 kg machine dimensions LxWxH: 1,7 x 1,4 x 1,9 m dimensions electric cabinet: 850x500x1500 mm Bwelou Nc Hkoqyx Nhol The milling machine is equipped with a 3-measuring path display. incl. machine feet and operating instructions *

Year of construction: 1986, Condition: good (used), Universal milling machine Fabr.KUNZMANN Type:UF 6 / 3 Bj.1986 with digital indicator Heidenhain spindle mounting : ISO 40 horizontal and vertical spindle speed : 50 - 2150 rpm feeds stepless : 0-1000 mm/min steps X / Y and Z 0-250 mm/min Rapid traverse : 2000 mm/min X / Y and Z 500 mm / min table surface :860 mm X 265 mm tiltability + - 45 degrees Bwjlqyoich Dvsx Nhsl Counter bearing, 2 milling arbors for horizontal milling. Machine Docs Available Good condition Ready for demonstration .

Condition: good (used), Hispano Suiza Geneve milling machine offered. X-travel: 410 mm Y-travel: 200 mm Z-travel: 400 mm Speed: 67- 3000 RPM Spindle: ISO 40 Bed: 430x225 mm Head adjustable Dimensions: 130x130x140 cm LxWxH Bslqyxof Srhgs Nhewl For more information call us or send an e-mail.

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, Kunzmann WF4/3 tool milling machine with Heidenhain TNC 320 contouring control, very good CONDITION, CE compliant!! Technical data: >> Year of manufacture 2008 Machine no. 348084 >> Rigid angle table >> Speed: infinitely variable up to 4500 rpm >> Feed infinitely variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min Z axis 4000 mm/min >> Travels X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and Equipment: >> Heidenhain TNC 320 contouring control >> Hydraulic tension vertical and horizontal Bwjlqev Dut Ijyx Nhel >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating instructions for the control and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the machine: A Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 contouring control is offered. This universal milling machine is in very good condition. It comes from a company where it was only used a little for training. A very easy-to-use control. The machine also has hydraulic tension vertically and horizontally. Converting from vertical to horizontal is very easy by folding away the vertical head. The guides are regularly lubricated by the central lubrication. The Kunzmann was mechanically and electrically tested by us. Take the opportunity to view and try out the Kunzmann on site under power.

Condition: used, Year of construction: 1985, Technical details: x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm control: Contour 1 Bahnsteuerung spindle taper ISO: SK 40 spindle head swivable left - right: 90° ° quill travel: 80 mm Bjlqyx Nju Ndcmshowl milling head vertical adjustable: 150 ( y-Achse) mm range of revolution per miute: Spindel vertical: 50 - 2.500 / 18 step U/min feed:: X/Y/Z: 2 - 1000 steples mm/min rapid traverse : X/Y/Z: 2000 mm/min revolution per minute: horizontal: bis 1.000 U/min Table dimensions: 460 x 800 mm table load: 0,4 t total power requirement: 9,5 kVA machine weight approx.: 1900 kg dimension machine xH: 2,35 x 2,2 x 2,0 m -Equipment: - Operation via control panel Grundig elektronic with boom - Cooling with pump - machine lighting - Linear interpolation, circular polarization in XY and XZ planes - quick chuck - manual control unit *

Condition: excellent (used), Year of construction: 1983, Functionality: fully functional, Universal milling machine Deckel FP3 with 3-axis active digital display TNC 111 Heidenhain and stepless feed. Great condition Technical data: Bwjlqyx Nov Aah Ijhel >> Year of manufacture 1983 Machine no. 2201-5115 >> Rigid angle table (revised) >> Speed: 25 - 2500 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 2.0 / 4.0 KW >> Spindle brake >> Travels X/Y/Z: 500/300/400 mm >> Vertical milling head on spindle block, 200mm movable >> Vertical quill and horizontal quill - SK40 extendable >> Tightening system S20 x 2 >> Weight approx. 1500 kg Accessories and Equipment: >> 3-axis active digital display Heidenhain TNC111 >> Coolant system >> Electric central lubrication About the machine: A universal milling machine Deckel FP3 in very good condition is offered. The machine has little crank play and all spindles can be moved easily. In this newer FP3 model, the feed is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A big advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions that the machine automatically moves to. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes working easier and more precise. Take the opportunity to view and try out this machine on site under power. The machine is available immediately.

Condition: excellent (used), Year of construction: 1994, Functionality: fully functional, Tool milling machine Kunzmann WF4/3 Heidenhain digital display year of manufacture 1994 very good CONDITION!! Technical data: >> Year of manufacture 1994 >> Rigid angle table >> Speed from 40 to 2550 rpm Biojv7Igbpa >> Continuous feed in X Y Z axis from 0 to 2000 mm/min >> Travels X/Y/Z: 400/320/400 mm >> Rapid traverse in all axes >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1500 kg Accessories and equipment: >> 3-axis Heidenhain digital display Bslqyxovyr R Ne Nhswl >> Electric central lubrication >> Machine feet >> Handwheels >> Coolant system About the machine: Offered is a Kunzmann WF4/3 tool milling machine in very good condition. It comes from a state-owned company where it was only used a little. Converting from vertical to horizontal is very easy, by folding away the vertical head. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and try out the Kunzmann on site with power.