Used Milling machines - univ.NC/CNC 500-699mm X-axis travel for sale (119)

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, table width: 520 mm, table length: 900 mm, overall weight: 4,500 kg, controller manufacturer: Heidenhain, TECHNICAL DETAILS Table size: 900 x 520 mm MACHINE DETAILS Gkjdpexl Sy Dsfx Abroc Control: Heidenhain Installation dimensions LxWxH: 3.16 x 3.62 x 2.37 m Weight: 6,000 kg Electrical data Operating voltage: 400 V / 3~ Mains frequency: 50 Hz Control voltage: 24 V Total rated current: 23 A Total power: 16 kVA Weight: 4,500 kg

Condition: good (used), Machine available for delivery within 15 days. Vertical 5-axis machining center MIKRON WF 41C. CNC Heidenhain 426. 16-tool magazine. Table length: 500 mm. Table width: 1000 mm. Max spindle speed: 4000 rpm. Spindle motor power: 4000 kW. In operating condition. Gjdpfx Aoxl Htfobrekc

Year of construction: 1988, condition: good (used), Tool milling machine Gedpehaq T Tefx Abrekc make: INFRATIREA, type: FUS-32, year 1988 Technical data: table 950 x 450 mm travels X / Y / Z: 500 / 320 / 400 mm spindle speeds 25 - 2000 rpm with digital display

Condition: good (used), Year of construction: 1991, functionality: fully functional, CNC milling machine HERMLE UWF 900 W year of construction 1991 Control: Heidenhain TNC 360 x-path: 600 mm y-path: 400 mm z-path: 420 mm Spindle holder ISO: SK 40 Vertical quill stroke: 75 mm Speed range: 20 ... 4000 rpm Spindle head swivels left and right: 90° left / right ° Feed rate:: X/Y/Z: 1...6000 mm/min. Feed rate:: X/Y: 7 m/min. + Z: 6 m/min. Table size: 900 x 460 mm Table load: 400 kg Total power requirement: 13 kW Machine dimensions approx. LxWxH: 4.0 x 3.8 x 2.0 m Weight approx.: 2300 kg Equipment: - Separate production cell - Coolant device - Control panel with swivel arm Gkedpfx Aoxhcu Dobrsc - SK 40 Heidenhain touch probe - handwheel

Condition: reconditioned (used), Year of construction: 2014, feed length X-axis: 650 mm, feed length Y-axis: 450 mm, feed length Z-axis: 450 mm, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 55 rpm, quill stroke: 75 mm, quill diameter: 80 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 55 rpm, table load: 400 kg, overall weight: 2,500 kg, Equipment: rotational speed infinitely variable, ABENE VHF 360 with Heidenhain TNC 620 Travel paths: X 650 / Y 450 / Z 450 mm Quill stroke: 75 mm HR 410 rotary table Speed range up to 5,000 rpm Condition: Machine in good condition, partially overhauled by us. New axis and gearbox bearings Belt replaced Godoxg Ic Djpfx Abrokc Wear parts checked/replaced Spindle bearings original, in good condition Special features: ✔ Immediately ready for operation ✔ Inspection and trial machining possible at any time

Condition: good (used), Year of construction: 2002, Maho DMU 50 M Universal Milling Machine, year of manufacture 2002, Siemens control, travel X/Y/Z 500/400/400 mm, feed X/Y/Z up to 5 m/min, manual rotary-swivel table with display indication, rotary table size 700 x 500 mm, swivel range -10° / +95°, max. table load 200 kg, spindle speed up to 4,500 rpm, SK 40 spindle taper. Gkedpoxm Srcsfx Abrec

Condition: good (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 10,000 m/min, rapid traverse Y-axis: 10,000 m/min, rapid traverse Z-axis: 10,000 m/min, total height: 2,200 mm, total width: 1,860 mm, total length: 2,164 mm, table width: 320 mm, table length: 800 mm, type of input current: AC, rotational speed (max.): 10,000 rpm, rotational speed (min.): 10 rpm, table load: 300 kg, overall weight: 2,800 kg, Equipment: documentation/manual, Fully functional milling machine with numerous accessories and manual. Gkedpfx Aow U Rdnsbrjc

Condition: good (used), ⚙️ Mikron Gear Hobbing Machine Type 132-02 (M23) – Now available at our facility in Ireland: Mikron Gear Hobbing Machine Type 132-02 (M23) in very good condition. This precision Swiss-made machine is ideal for the production of small gears, toolrooms, and manufacturers seeking reliable, high-precision gear cutting capabilities. Mikron is renowned for its robust construction and long-lasting performance in gear hobbing applications, making it an outstanding solution for hobbing spur gears, helical gears, and splines with consistent accuracy. Condition: Used Stock number: 968859 State: Good Maximum diameter: 100mm (4") Maximum length: 100mm (4") Gkjdpsxlabcjfx Abroc Number of teeth: 6–400 Maximum pitch in steel: 15 D.P. 12 table revolutions Geometrically calibrated between 200 and 2,400 rpm Feed: Horizontal or plunge cutting Main motor: 1.5 HP Coolant pump motor: 0.1 HP Hydraulic system motor: 0.1 HP Dimensions: 1120 x 1120 x 1680 mm Machine weight: 500 kg

Condition: excellent (used), Year of construction: 2025, Hermle UWF 900 Gkedoxf Ec Sopfx Abrsc Year of manufacture according to wiring diagram: 1992 Heidenhain 407 control Handwheel Electric pushbutton Network connection Speed: 4,000 rpm Technical data: X-travel: 600 mm y-travel: 400 mm z-travel: 420 mm Tool holder: SK 40 Distance spindle/table: 127 - 567 mm Spindle diameter at front bearing: 55 mm Videos of the machine are available!

Condition: used, machine/vehicle number: 186137200089, used TOS tool milling machine model FNG 40 CNC Year of manufacture: 1988 with Heidenhain path control TNC 155 Gjdpfexf Inkox Abrekc with fixed angular table 800x400mm Travel paths: X/Y/Z = 500/400/400mm Speed range: 10-3150 rpm Spindle: SK40 Chip guard, attachable Documentation for the machine and control is available. The machine is located in 71334 Waiblingen-Beinstein and can be inspected by appointment.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 36194, feed length X-axis: 800 mm, feed length Y-axis: 400 mm, feed length Z-axis: 450 mm, travel distance X-axis: 800 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 2,000 m/min, spindle speed (max.): 5,000 rpm, spindle speed (min.): 55 rpm, quill stroke: 75 mm, quill diameter: 80 mm, rapid traverse X-axis: 5,000 m/min, rapid traverse Y-axis: 5,000 m/min, rapid traverse Z-axis: 2,000 m/min, table length: 1,530 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 5,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, Universal milling and drilling machine. X 800 mm Y 400 mm Z 450 mm - Heidenhain TNC 620 with ABENE/HEIDENHAIN software for easy operation - 2-speed gearbox with frequency-controlled spindle motor from 55 to 5,000 rpm. - 1 LED machine light, 24 V/70 W - Electronic handwheel HR-510 for the X, Y, and Z axes - Complete electrical equipment for 400 V, 3-phase, 50 Hz. - Transformer for 24 V control voltage. Gkjdpfx Abowf E R Eerec - All fuses in the electrical cabinet are automatic. - Machine longitudinal, cross, and vertical feeds - AC motor spindle, 7.5 kW - Z-axis spindle, 40 mm diameter, ball screw. - Spindle for the X and Y axes, with backlash-free ball screw. Ø 32 mm. - All guideways are hardened and ground. - An automatic central lubrication system lubricates all guideways and ball screws. - AC servo motors with continuously variable control via Heidenhain TNC 620 - Extendable chip tray - Collision protection monitoring in all axes via electronic threshold monitoring - Keys, operating instructions, spare parts catalog, and acceptance report. - Mechanical handwheels in all axes (optional) - Table enclosure - Key switch for selecting between manual and automatic mode. We offer you a machine that is ideally suited for training and continuing education. Our machine is characterized by its robust construction and enables precise machining of workpieces. Thanks to its features, it is ideal for use in training workshops or professional development courses. The machine allows you to gain practical experience in CNC manufacturing and deepen your understanding of CNC technology. Our machine is located in our warehouse in Pfullingen and can be inspected at any time. We would also be happy to arrange a test run to demonstrate the machine's capabilities. You will quickly notice how easy and efficient our machine is to operate. We offer the machine at a fair price. Please contact us for further information or to request a quote. We are confident that our machine will meet your requirements and look forward to your inquiry.

Condition: ready for operation (used), functionality: limited functionality, machine/vehicle number: 2832-1076, feed length X-axis: 560 mm, feed length Y-axis: 500 mm, feed length Z-axis: 390 mm, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 390 mm, feed rate X-axis: 4 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 4 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 4 m/min, total height: 2,265 mm, total width: 2,410 mm, total length: 2,710 mm, table width: 530 mm, table length: 900 mm, type of input current: three-phase, rotational speed (max.): 4,000 rpm, rotational speed (min.): 40 rpm, table load: 800 kg, overall weight: 2,890 kg, input voltage: 380 V, workpiece weight (max.): 800 kg, input current: 44 A, input frequency: 50 Hz, number of spindles: 2, number of slots in tool magazine: 20, Equipment: documentation/manual, Tool holder: SK 40, Control: DECKEL DIALOG 11, with documentation. According to our research, the NPL01 board of the tool changer is defective. Therefore, the automatic tool changer does not work. Otherwise, the machine is fully functional. Operating manual (Machine manual 1), diagnostic manual for the 'DIALOG11' control, machine manual 2 (accessories), programming manuals 1-3, and electrical wiring diagrams are available. The machine can be viewed under power. The machine is bought as is. No warranty. Gkjdpfewqdtpsx Abrjc

Condition: excellent (used), Year of construction: 2007, Control: Heidenhain iTNC 530 Table Clamping surface: 1200 x 450 mm T-slots: 6 x 18 H7 mm Maximum load: 400 kg Feeds Longitudinal travel: 650 mm Cross travel: 480 mm Vertical travel: 475 mm Feed (X, Y, Z): Infinitely variable Rapid traverse X,Y: 6000 mm/min Rapid traverse Z: 4000 mm/min Feed motor AC (Z): 4.0 (10.5) Nm Spindle Speed range: 55 – 4000 rpm Speed control: Frequency controlled, stepless Spindle taper: ISO 40 Spindle power: 7.5 kW Spindle swivel: ± 90° Gkjdpfexd Tgiex Abrjc Spindle stroke: 140 mm Weight Net weight: 2100 kg Gross weight: 2300 kg

Condition: ready for operation (used), Year of construction: 1970, Immediately available from university: Universal milling machine with slotting head SHW Type UF 1 Year of manufacture: 1970 Retrofit: 2010 Table: 700 x 310 mm Travel X/Y/Z: 550/340/420 mm Taper: SK 40 Spindle speeds: 46 – 2,200 rpm Quill stroke: 80 mm Slotting stroke: 200 mm Feed rates: 12 – 254 mm/min Weight: 2 tons SK 40 toolholders Gedpfx Absxldz Horskc Hydraulic vise Price: EUR 2,500.— plus VAT ex location

Condition: good (used), Year of construction: 2014, operating hours: 7,633 h, functionality: fully functional, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 500 mm, spindle speed (max.): 12,000 rpm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, table load: 500 kg, The machine is currently in use. It can be inspected under power at any time. Control: Heidenhain I TNC 530 SK40 Godpfx Abexl T Nasrokc 60-position magazine.

Condition: excellent (used), Year of construction: 2007, Universal milling machine Manufactured by KUNZMANN. WF 650 Year of manufacture 2007 Technical specifications Manufacturer Kunzmann Type WF 650 Year of manufacture 2007 X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Clamping area 1000 x 600 mm Spindle mount SK 40 Spindle speeds 5 - 6500 rpm Quill stroke 60 mm Vertical head swivels +/- 90 Max. table load 400 kg Feed rates - longitudinal/transverse/vertical 0 - 4000 mm/min Rapid traverse 25 / 25 / 20 m/min Distance between table and vertical milling spindle 100 / 550 mm Distance between table and horizontal spindle 270 / 720 mm Number of tool magazine positions: 20 Tool diameter: 95 mm Tool diameter with 2 free positions: 135 mm Max. tool length: 300 mm Max. tool weight: 7 kg Spindle power: 13 kW Total power requirement: 20 kVA Machine weight: approx. 5.5 t Machine dimensions: L x W x H: 3.80 x 2.70 x 2.40 m Equipment Godpfx Aswhm S Nebrokc - Heidenhain iTNC 530 control system - Operating instructions - Enclosure - Vertical head with extendable spindle sleeve - Hydraulic tool clamping - Fixed table - Electronic handheld control panel - Coolant system - Chip conveyor All information is subject to change without notice. A demonstration is available at any time in our showroom.

Condition: excellent (used), Year of construction: 1989, Philips CNC 432 control Gksdpfsxc N Iyjx Abrsc Travel paths X/Y/Z 600 x 400 x 450 mm Spindle speed 4,000 rpm 20-position tool magazine SK 40 4th axis Lehmann

Condition: used, CNC Milling Machine ABENE Type VHF-360TI serial no. 36084 year of construction 2008 CNC control HEIDENHAIN TNC 320 Travel X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle holder SK 40 Gsdpfx Aoty A Ehobrskc Spindle speed 55 - 3000 rpm. 2 steps Feed speed 30 - 4000 mm/min. infinitely variable Rapid traverse speed (X + Y-axis) 4000 mm/min. Rapid traverse speed (Z-axis) 2000 mm/min. Spindle nose-to-table distance 20-495 mm Motor power spindle drive 7.5 kW Mains connection 400 Volt, 50 Hz - CNC contouring control HEIDENHAIN TNC 320 with RS232, USB and LAN interfaces - Electronic handwheel - mechanical handwheels for X and Y axis - Spindle speed manually switchable with 2 gear stages (stage 1 = 55-700 rpm) + (stage 2 = 701-3000 rpm) - Inclined bed concept with laterally mounted swivel spindle head +/- 50° - Manual inclined bed adjustment via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with electric cooling lubricant pump opposite - Machine light - Switch cabinet permanently attached to the machine - Operating hours of control unit on = 14780 hours - Read operating hours machine on = 12980 hrs. - Read operating hours program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Very good condition

Condition: excellent (used), Year of construction: 2011, Type: Conventional milling machine Manufacturer: Avia Model: FNE 40P Gksdpfx Abexk R Hasroc Year of manufacture: 2011 Control: Conventional with digital display Serial number: 90494 Longitudinal travel (X): 620 mm Cross travel (Y): 420 mm Vertical travel (Z): 400 mm Table: 400 x 800 mm Max. workpiece weight: 400 kg Spindle taper: SK 40 Spindle speed: 40 – 4000 rpm Weight: approx. 2000 kg Digital display: Heidenhain ND 780 integrated in the control panel

Condition: ready for operation (used), Year of construction: 1989, Available immediately from location: MAHO Toolroom Milling Machine Type MH 500 M Year of manufacture 1989 Heidenhain Digital Display Table 800 x 360 mm SK 40 Spindle speeds 63 – 4000 rpm Quill stroke 50 mm Travel X/Y/Z 500/380/350 mm Drive 3 kW Feed rates 10 – 1000 mm/min Coolant system Weight 1600 kg Adapters Gkedpfx Absxldy Njrsc Hydraulic vise Price: €3,000 plus VAT, ex location

Condition: new, x-travel 600 mm y-travel 300 mm z-travel 350 mm table-size 1120 x 260 mm spindle taper ISO 40 spindle turning speed range 67 - 2010 U/min quill stroke 120 mm bore capacity in steel 40 mm total power requirement 2,2 kW weight of the machine ca. 1,3 t dimensions of the machine ca. 1,58 x 1,45 x 2,15 m Gkedpfjf Nb Hcjx Abrec

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 3501100, travel distance X-axis: 550 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 10,000 rpm, rapid traverse X-axis: 10 m/min, TECHNICAL DETAILS Travel Paths X-axis travel: 550 mm Y-axis travel: 305 mm Z-axis travel: 460 mm Main Spindle Main spindle speed range: 10 - 10,000 rpm Drive power - main spindle: 11 / 7.5 kW Max. torque: 70 / 48 Nm Tool holder: BT 40 Worktable Clamping surface: 800 x 320 mm Max. table load: 300 kg T-slots: 3x 14 x 100 mm Distance spindle / table: 100 - 600 mm Tool Changer Number of tool stations: 12 Tool holder: BT 40 Max. tool diameter: 70 mm Max. tool weight: 6.0 kg Tool-to-tool change time: 7.0 sec Feed Rates Gksdpfoxb Aczsx Abrsc Rapid traverse (X / Y / Z): 10 m/min Feed rate: max. 10,000 mm/min Repeatability: +/- 0.008 mm Positioning accuracy: +/- 0.01 mm MACHINE DETAILS Control: Siemens Sinumerik 808D adv. Space & Weight Required space approx.: 3.5 x 2.5 x 2.4 m Machine weight approx.: 2,800 kg Total power requirement: 15 kVA EQUIPMENT Documentation Chip removal system Coolant system Tool changer RENISHAW - Primo touch probe

Condition: excellent (used), Year of construction: 1997, Universal milling and drilling machine Manufactured by KUNZMANN. WF 7/3 Year of manufacture: 1997 Technical specifications Make: Kunzmann Type: WF 7/3 Year of manufacture: 1997 X-axis: 600 mm Y-axis: 400 mm Z-axis: 400 mm Clamping surface: 800 x 425 mm Clamping slots: 6 Slot spacing: 63 mm Max. load: 250 kg Tool holder: SK 40 Quill stroke: 60 mm (vertical) Head can be swiveled 90° to both sides Drive power: 4 kW Dimensions: approx. L 2.0 x W 2.0 x H 2.0 m Weight: approx. 2.0 t (including control cabinet and swivel panel) Equipment - Heidenhain TNC 124 control - Operating instructions - Enclosure Gjdpfswhm Sijx Abrekc - Coolant system - Hydraulic tool clamping All information is subject to change without notice. A demonstration is available at any time in our showroom.

Condition: used, Year of construction: 2004, Technical Specifications: Travel X/Y/Z: 650 / 500 / 450 mm Clamping Area: 1000 x 600 mm Spindle Mount: SK 40 Spindle Speed: 6500 rpm Max. Table Load: 400 kg Number of Tool Magazine Positions: 20 Power: 24 kVA Machine Weight, Approx.: 5500 kg Equipment: - Motorized Spindle 12000 rpm - 20-Station Tool Changer - Heidenhain Tool Probe Gkedpfjwglapjx Abroc - Heidenhain Workpiece Probe - Heidenhain Handwheel - Menzel Minimum Quantity Lubrication - Approx. 25 Tool Holders

Condition: ready for operation (used), Year of construction: 1990, Immediately available from university: Gkjdpfx Aoxldypsbrjc Tool milling machine Maho Model MH 400 P Year of manufacture: 1990 Heidenhain TNC 135 Table 690 x 270 mm Travel with feed 360/200/375 mm Travel with handwheel 400/250/375 mm SK 40 Hydraulic tool clamping Spindle speed 40 – 2500 rpm, stepless Feed X and Z axis 5 – 1000 mm/min, stepless Feed Y axis 5 – 670 mm/min, stepless Rapid traverse 1.2 m/min Drive 2.2 kW Conventional handwheels for X/Y/Z axis Coolant system Tool holders Vice Weight 1,000 kg Price: EUR 4,500 plus VAT ex location