Used Bernardo Gbs 200 B for sale (223)

Condition: new, square edge steel 20x20 / 25x25 mm flat steel 100 x 7.0 mm round bar steel 22.0 / 27.0 mm L-beam 100 x 10 mm weight of the machine ca. 33.0 kg. range L-W-H 900 x 430 x 310 mm Features - For precise cold and hot bending of flat, round and square steels - Sturdy design for bolting to the workbench - Infinitely adjustable bending stop - With eccentric quick clamping for efficient working - Readable bending angle up to 120 - High repeat accuracy thanks to bending angle stop - Ideal for repair workshops and locksmiths - - - - - Bending performance "cold" : Flat steel 100 x 7 mm 65 x 12 mm Round steel 22.0 mm Square steel 20 x 20 mm Angle steel 100 x 10 mm Fgodpfxjxcuyhs Ahaef - - - - - Bending capacity "hot" : Flat steel 100 x 15 mm 75 x 20 mm Round steel 27.0 mm Square steel 25 x 25 mm Angle steel 100 x 15 mm - - - - - Scope of delivery - Bending plate - Angle stop stepless - Clamping block with eccentric clamp - Material stop

Condition: new, Technical data: Belt speed: 15 / 30 m/s Sanding diameter: 20 - 76 mm Carriage adjustment: 30° - 90° Surface grinding table: 400 x 100 mm Contact wheel ø x W: 195 x 100 mm Fgodpfxjqvmqye Ahaef Suction connection ø: 2 x 75 mm Speed: 1420 / 2660 1/min Motor power: 2.5 / 3.3 kW Dimensions (WxDxH), approx.: 750 x 1400 x 1200 mm Weight, approx.: 148 kg Features: - Consistent belt tension due to spring-loaded tensioning device - With cylindrical sanding device for sanding diameters from diam. 20 - 76 mm as standard - Quick and easy adjustment of the desired sanding angle - Graphite coating on the face grinding surface increases the sliding properties of the sanding belt - Large flat sanding surface with protective cover - Slow belt speed (15 m/s) optimal for sanding stainless steel and aluminum - User-friendly belt change, quick and uncomplicated - Quick and easy changing of the sanding rollers without tools - Various sanding angles from 30° to 90° easily possible - Shorter processing times compared to milling Scope of delivery: - Sanding belt K 36 - Rubberized sanding drum - 1 sanding roller for 1 1/4" (42/44 mm pipe) - 2 hinged protective discs - Sanding and support table - 2 x dust extraction nozzles diam. 75 mm - 2 x chip container - Graphite coating - Motor protection switch

Condition: new, width of the strips 100 mm band length 2000 mm band speed 15 + 30 m/sel tube diameter 20 - 76 mm angle adjustable from - to 30 - 90 Grad Dust suction hood 2 x 75.0 mm motor speeds: 1420 / 2660 Upm. face grinding attachment 400 x 100 mm total power requirement 2.5 / 3.3 kW weight of the machine ca. 148 kg. range L-W-H 750 x 1400 x 1200 mm Furnishing : - Constant belt tension through spring-loaded tensioning device - Standard with cylindrical grinding device - for grinding diameters of diam. 20-76 mm - Quick and easy setting of the desired grinding angle - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Fsdpfx Ahjxab Dzjasgf - Large plan grinding surface with protective cover - Slow belt speed (15 m / sec.) - ideal for grinding stainless steel and aluminum - User-friendly tape change, quick and uncomplicated - Quick and easy changing of the grinding rollers without tools - Various grinding angles from 30 ° to 90 ° are possible without any problems - Shorter processing times compared to milling scope of delivery - Sanding belt K 36 - Rubberized sanding roller - 1 piece sanding roller for 1 1/4 "pipe (42/44 mm pipe) - 2 pcs. Hinged protective panels - Sanding and support table - 2 x dust extraction nozzle diam. 75 mm - 2 pieces of chip collector - graphite coating - Motor protection switch

Condition: new, thread dia. M6 - M36 turning speeds 30 - 150 U/min working area max. 1200 R angle adjustable from - to 0 - 90 Grad voltage 230 V engine output 1200 W weight 65,0 kg - Includes quick-change chuck - for use with taps - for through holes and blind holes - Swivel motor unit for thread cutting - at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting - Thread is guaranteed to be right-angled (90°) - High productivity - significant time savings compared to manual thread cutting - Quick-change chuck with integrated slip clutch - Includes swivel arm with large radius - for easy positioning of the tap on the workpiece - Highly economical due to low investment and maintenance costs Fsdpfx Ahexab Eljajgf - For thread cutting in steel, stainless steel, aluminum and non-ferrous metals Scope of delivery - Operation via touchscreen - Digital drilling depth display - Quick-change holder according to DIN - Quick-change chuck - Electric motor - 90° angle adjustment - Mounting flange Special accessories included: - BERNARDO base frame with 2 drawers * milled support surface 900 x 600 mm * including 3 T-slots (16 mm) * large storage space and 2 drawers for storing tools * 4x swivel castors including parking brake - Mounts according to DIN 376: * M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36

Condition: new, thread dia. M5 - M24 turning speeds 70 - 200 U/min working area max. 1200 R angle adjustable from - to 0 - 90 Grad voltage 230 V engine output 1200 W weight 65,0 kg - with micro spray system for constant cooling & minimal Cooling lubricant consumption - Includes blow-out device to remove chips, ensuring optimal visibility on the borehole - Includes quick-change chuck for using taps for Through and blind holes - Swivel motor unit for thread cutting at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting, thread is guaranteed right angle (90°) - high productivity, significant time savings compared to manual Threading - Quick-change chuck with integrated slip clutch prevents breaking of the tap - Includes large radius swivel arm for easy positioning tap on the workpiece - For thread cutting in steel, stainless steel, aluminum and non-ferrous metals scope of delivery Fsdpjxaaybefx Ahaegf - Operation via touchscreen - Digital drilling depth display - Micro spray system - Blow-out device - Quick change mount - Quick-change chuck according to DIN - Electric motor - 90° angle adjustment - Mounting flange Special accessories included: - BERNARDO base frame 900 x 600 mm (Art. No.: Mounts: DIN 376: M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24

Condition: new, Bernardo Hydraulic guillotine shear HSB 2000 x 4 Cutting length 2000 mm Max. sheet thickness * 4 mm Fodoqpfrmopfx Ahaogf Cutting angle 1° 30' Motorized backgauge 0 - 600 mm Strokes / min 12 Number of hold-down devices 8 pcs. Table height 760 mm Support arms 3 pcs. Oil tank 100 liters Motor power 4.0 kW Length 2700 mm Depth 2600 mm Height 1600 mm Weight approx. 3015 kg * Material strength 400 N/mm² Scope of delivery: - Cutting gap adjustment - Cutting line lighting - Motorized NC backgauge - Front sheet supports - Lateral stop - Angle stop - Protective plate with photocells - E21S control unit - Foot pedal with emergency stop - Tool steel blade

Condition: new, Bernardo Hydraulic guillotine shear HSB 2000 x 6 Cutting length 2000 mm Max. sheet thickness * 6 mm Cutting angle 1° 45' Motorized backgauge 0 - 600 mm Strokes / min 12 Number of hold-down devices 8 pcs. Table height 800 mm Support arms 3 pcs. Oil tank 100 liters Motor power 7.5 kW Length 2800 mm Depth 2800 mm Height 1670 mm Weight approx. 3925 kg * Material strength 400 N/mm² Scope of delivery: - Cutting gap adjustment - Cutting line lighting - Motorized NC backgauge - Front sheet supports - Lateral stop - Angle stop - Protective plate with photocells - E21S control unit Fgjdpfeqpfwysx Ahaef - Foot pedal with emergency stop - Tool steel blade

Condition: new, Bernardo TM 36 BLO/ R 1200 Electric threading machine Technical specifications Threaded holes* M5 - M36 Tool holder GT 24 Speed max. 30 - 150 rpm Adjustable angle 0° - 90 Fgsdpfx Ahspag R Reajf Max. Working radius R 1200 mm Quick-change chuck DIN 376: M5-6 / M8 / M10 / M12 / M14 M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36 Motor power 1200 W Voltage 230 V Weight approx. 35 kg * Material strength 400 N / mm2 Scope of delivery Operation via touchscreen Digital drilling depth display Micro spray system Blow-out device Quick-change holder Quick-change chuck according to DIN Electric motor 90° angle adjustment Mounting flange features With micro-spray system as standard for constant cooling and minimum cooling lubricant consumption Includes blow-out device for removing chips, providing an optimum view of the drill hole Includes quick-change chuck for using taps for through holes and blind holes Swivel motor unit for tapping at any desired angle between 0° and 90 Higher accuracy compared to manual tapping, thread is guaranteed to be at right angles (90°) High productivity, significant time savings compared to manual tapping Quick-change chuck with integrated slip clutch prevents the tap from breaking Includes swivel arm with large radius for easy positioning of the tap on the workpiece For tapping in steel, stainless steel, aluminum and non-ferrous metals Price: Base frame 900 x 600 mm with 2 drawers for TM series 830.00 € plus 19% VAT

Condition: new, Bernardo Belt Sander KBR 100 x 2000 Duo Belt dimensions 100 x 2000 mm Belt speed 15 / 30 m/s Min./max. pipe diameter 20 – 76 mm Sled adjustment 30° – 90° Flat grinding table 400 x 100 mm Contact wheel Ø x W 195 x 100 mm Dust extraction connection Ø 2 x 100 mm Speed 1410 / 2850 rpm Motor output S1 100% 2.2 / 2.8 kW (400 V) Motor input S6 40% 3.0 / 4.0 kW (400 V) Fgjdpfjd Id Ubsx Ahasf Machine dimensions (W x D x H) 750 x 1450 x 1160 mm Weight approx. 158 kg Features Consistent belt tension thanks to spring-loaded tensioning device Standard with round grinding attachment for pipes with diameter 20 – 76 mm Quick and easy adjustment of the desired grinding angle Graphite coating on the flat grinding surface increases the sliding properties of the grinding belt Large-sized flat grinding surface with protective cover Slow belt speed (15 m/s) is ideal for grinding stainless steel and aluminum User-friendly belt change, quick and easy Quick and easy changing of the grinding rollers without tools Various grinding angles from 30° to 90° can be easily achieved Shorter processing times compared to milling Scope of delivery Grinding belt K 36 Rubberized grinding roller 1 piece grinding roller for 3/4“ pipe (26/28 mm pipe) 2 pieces folding protective screens Round grinding attachment Grinding and support table 2 x dust extraction nozzles, diameter 100 mm 2 pieces chip collection containers Graphite coating Motor protection switch

Condition: new, Universally applicable double grinding machine for professional users. The induction motor runs quietly and maintenance-free thanks to the quality ball bearings. The quality grinding wheels ensure optimal work results when sharpening and deburring tools. Technical data: Fjdpfx Aovnrm Hohasgf Grinding wheel bore: 32 mm Grinding wheel grain: K 36 / K 80 Speed: 2850 rpm Motor output power S1 100%: 0.90 kW Motor input power S6 40%: 1.25 kW Voltage: 400 V Width: 510 mm Depth: 270 mm Height: 310 mm Weight approx.: 25 kg Features: - ON-OFF switch in accordance with IP54 with undervoltage release - Extended application area thanks to optionally available grinding attachment - Universally applicable for a wide range of materials (metal, plastic, wood, ...) - Very smooth running thanks to balanced rotor with quality ball bearings - Large protective glasses provide optimal protection against flying sparks - Stable and adjustable workpiece support made of cast iron - Powerful pulling power thanks to powerful Drive motor Scope of delivery: - Roughing disc K 36 - Finishing disc K 80 - Spark guard on both sides - Workpiece support Note: Illustrations may show special equipment and application examples. These are not included in the scope of delivery. (Belt grinding attachment and base frames available for an additional charge)

Condition: new, bore capacity in steel (diameter) 32,0 mm throat 255 mm bore stroke 120 mm morse taper 4 MK table: 385 x 335 mm turning speeds 80 - 2130 U/min total power requirement 1,1 / 2,2 kW weight 125 kg range L-W-H 460 x 900 x 1730 mm Furnishing: - Surface-machined work table - Height adjustable via rack and hand crank Fgedpfsxaaqgjx Ahaef - Ground base plate with T-slots for clamping high workpieces - V-belt drive with balanced drive pulleys for smooth running - Adjustable drilling depth stop for precise infeed of the quill - Powerful 2-stage motor, speed range from 80 - 2130 rpm - Direction of rotation switch for clockwise and counterclockwise rotation included in the scope of delivery - Cross line laser device for comfortable work - Compact, stable cast iron construction in a modern design - Stable and polished steel column, designed for heavy use Scope of delivery: - Drill chuck arbor MK 4 / B 18 - Keyless chuck 1 - 16 mm / B 18 - Cam switch for right-left rotation - Cross line laser device - T-nuts - Height-adjustable protective cover

Condition: new, 6.0 mm ST 40 Fsdpexcuybefx Ahaegf 3.0 mm VA 30 - 140 Grad blade length 200 x 200 mm table: 900 x 990 mm work height max. 940 mm Punching capacity 35.0 in 6.0 mm ST 40 Throat / punching unit 135 mm engine output 4.0 kW weight 1020 kg range L-W-H 900 x 990 x 1200 mm Characteristics : - Notching with a burr-free cut, without deformation of the cut edges - Blades made of surface-hardened tool steel - Operation by means of a foot pedal, so both hands are free for the workpiece - Large dimensioned work table with built-in scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting blade for high security scope of delivery - hydraulic Notching machine with adjustable angle & punching station - 1 set of cutting knives - Round punch with die 12 mm - 2 swiveling material stops - Plexiglas protective cover - Foot pedal with emergency stop

Condition: new, sheet width 1050 mm plate thickness 1.0 mm daylight opening 95.0 mm angle adjustable from - to 0 - 150 Grad total power requirement manuell weight of the machine ca. 180 kg range L-W-H 1320 x 790 x 1050 mm characteristics - Universally applicable bending machines for plumbing and repair shops Fedpfx Aexcuxwehaegf - Simple pivoting movement of the bending beam using a bow handle - Easy adjustment of the upper beam for efficient work - High upper beam for producing high-edged profiles - The piano inserts in the upper, lower and bending beam result in a large number of bending options - Cassettes and special profiles with opposite bends are with these Models easily feasible Scope of delivery : - Segmented upper, lower and bending beam - bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 2 x 250 mm

Condition: as good as new (ex-display), Year of construction: 2019, bore capacity in steel (diameter) 35,0 mm bore capacity in cast iron 40,0 mm threading M 24 in Stahl throat 320 mm morse taper 4 MK bore stroke 160 mm turning speeds 65 - 3250 U/min table: 500 x 420 mm throat 320 mm weight 375 kg range L-W-H 600 x 870 x 2.170 mm 2019 showroom model (!!) Approx. 1 hour of operation Special price on request Furnishing: - Infinitely variable speed, ideal for - Set the desired cutting speed. - Automatic tool ejector and thread cutting device as standard - Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev - Solid gray cast iron table with rotating and swiveling support surface - T-slots in the machine base enable high workpieces to be clamped - Guaranteed concentricity 0.02 mm, measured in the quill - Hardened and ground gears ensure smooth running - Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, MT 4/2 - coolant device - Thread cutting device - Electromagnetic spindle feed - Automatic tool ejector - LED machine light - First filling with Shell Tellus 46 - Digital speed display Fodpfxjxaabrs Ahajgf - Height-adjustable protective cover

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Features and technical specifications: - The drilling depth is adjusted via a maintenance-free linear guide - Efficient and cost-effective operation thanks to the rapid-lift system, eliminating the need for laborious cranking - Smooth-running and infinitely variable drilling unit - Height adjustment with fine adjustment and gas pressure cylinder for weight compensation - Transverse and height adjustment with scales and adjustable stops - Vibration-free operation thanks to robust steel construction - Drilling depth adjustable via a scale and stop - The drill head height adjustment can be used entirely for vertical slotting - Large-dimension grey cast iron table with a ground surface - Motor power: 1.5 / 1.9 kW - Voltage: 400 V - Speed: 1,400 / 2,850 rpm - Westcott drill chuck: 0–20 mm - Maximum drilling depth: 220 mm - Drilling width: 340 mm - Height adjustment: 145 mm - Swivelling drill head: -60° to +60° - Drilling table size: 595 × 315 mm - Table extension: 2 × 200 × 220 mm Fgjdpfjzk Nlnsx Ahaof - Drilling table height: 830 mm Dimensions: 1,200 × 1,050 × 1,300 mm Weight: approx. 240 kg Availability: at short notice Location: Flörsheim

Condition: good (used), Saw roller stand, saw roller stand, sawhorse, roller conveyor stand, roller stand -Manufacturer: Bernardo, roller stand for hacksaw, band saw, cold circular saw -Roll height: 570 to 970 mm -Roll: Ø 52 x 355 mm Fedpfx Ahovm Sv Seajgf -Dimensions: 500/420/H570 mm -Weight: 14 kg

Condition: good (used), Saw roller stand, saw roller stand, sawhorse, roller conveyor stand, roller stand -Roller stand: Roller stand for hacksaw, band saw, cold circular saw.... -Roll height: 445 to 565 mm -Roll: Ø 55 x 270 mm Fodjwvfmbepfx Ahaogf -Dimensions: 370/315/H445 mm -Weight: 22 kg

Condition: excellent (used), For sale: Bernardo KFM 500 M edge chamfering machine, designed for precise chamfering and deburring of parts made of steel, stainless steel, aluminum, and other metals. This machine is ideal for preparing parts for welding, removing sharp edges, and creating even chamfers. Its robust construction and adjustable chamfering angle ensure accurate and repeatable machining. The machine is sold with the operating manual and a set of cutting blades, as shown in the pictures. Technical data: Manufacturer: Bernardo Country of manufacture: Austria Model: KFM 500 M Year of manufacture: 07/2019 Machine number: PWA-190707 Type: edge chamfering machine Motor power: 0.55 kW Power supply: 400 V Frequency: 50 Hz Rated current: 1.48 A Recommended protection: C16 Weight: 33 kg Application: The device is designed for: chamfering edges, deburring parts, preparing material for welding, machining steel, stainless steel, and aluminum, Fodpfx Aoziww Nohaogf creating precise chamfers for welds. Included: Bernardo KFM 500 M chamfering machine, operating manual, set of cutting blades (shown in the pictures), other items shown in the pictures. Condition: The device is used and in good visual condition. Normal signs of wear and tear are visible, consistent with its use. The machine is sold exactly as it is and with all the components shown in the pictures.

Condition: new, Special offer price for in-stock items! Only while supplies last! Price ex warehouse, plus VAT. Belt sanding machine: Bernardo Type/Model: MS 75 x 2000 S Condition: new Belt dimensions: 75 x 2000 mm Belt speed: 29 m/s Contact wheel Ø x W: 200 / 80 mm Platen sanding table: 460 x 75 mm Dust extraction connection: 100 mm Motor output power S1 100%: 3.0 kW Motor input power S6 40%: 4.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 66 kg Features: Good sanding performance due to high belt speed Quick adjustment for horizontal and angled positions Continuous platen sanding surface for optimal sanding of long workpieces Consistent belt tension thanks to spring-loaded tensioning device Universally applicable for sanding edges, surfaces and for round sanding Including quick-release system for fast belt changes Simple adjustment of parallel belt run by means of adjusting screw Graphite coating on the platen sanding surface increases the sliding properties of the sanding belt Fsdpfx Ajfnr Aishasgf Scope of delivery: - Sanding belt K 80 - Folding protective cover - Sanding and support table - Workpiece stop - Dust extraction nozzle - Separate on/off button - Base frame

Condition: new, Special offer for in-stock items! Only while supplies last! Price ex warehouse, plus VAT. Belt sander: Bernardo Type/Model: MS 75 x 2000 S-2 Condition: New Belt dimensions: 75 x 2000 mm Belt speed: 14.5 / 29 m/s Contact wheel Ø x W: 200 / 80 mm Platen table: 460 x 75 mm Dust extraction connection Ø: 100 mm Motor output power S1 100%: 2.4 / 3.0 kW Motor input power S6 40%: 3.0 / 4.0 kW Voltage: 400 V Fsdjb Hhkgopfx Ahasgf Dimensions (L x W x H): 1080 x 440 x 1000 mm Weight approx.: 67 kg New item in original packaging.

Condition: new, Special promotional price for in-stock items! While supplies last! Price ex warehouse, plus VAT. Belt sanding machine: Bernardo Type/Model: MS 150 x 2000 S-2 Fgedpfx Aheb Hhh Doasf Condition: New Belt dimensions: 150 x 2000 mm Belt speed: 14.5 / 29 m/sec Contact wheel Ø x W: 200 / 155 mm Platen sanding table: 460 x 150 mm Dust extraction connection Ø: 100 mm Motor output S1 100%: 2.1 / 2.8 kW Motor input S6 40%: 2.8 / 3.6 kW Voltage: 400 V Length: 1080 mm Width: 520 mm Height: 1000 mm Weight approx.: 85 kg Features: - Standard with 2 speeds, ideal for sanding stainless steel - Universally applicable for sanding edges, surfaces and for round sanding - Graphite coating on the platen sanding surface increases the gliding properties of the sanding belt - Consistent belt tension thanks to spring-loaded tensioning device - User-friendly belt change, quick and easy - Good sanding performance thanks to high belt speed - Quick adjustment for horizontal and angled position - Universally applicable for crafts and industry - Large-sized platen sanding surface with protective cover - Including fine adjustment for parallel belt running Scope of delivery: - Sanding belt K 80 - Foldable protective disc - Sanding and support table - Workpiece stop - Dust extraction nozzle - Motor protection switch - Rubberized sanding roller - Graphite coating - Separate on/off switch - Base frame Promotional price ex warehouse Mindelheim, free on board. Art. 05-1249

Condition: new, Technical data: Working length: 1020 mm Max. sheet thickness: 2.5 mm Fgjdpfxect Rzbj Ahaof Max. opening width: 48 mm Bending angle: 0 - 135° Width: 1350 mm Depth: 820 mm Height: 1140 mm Weight approx.: 285 kg Features: - Versatile bending machine for sheet metal workshops and repair shops - Robust construction in a modern design - Easy adjustment of the upper die using a foot pedal, leaving hands free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper die for a wide range of bending options - Optimal price-performance ratio - Quick and easy bending process using a handle - Non-slip rubber coating on the foot pedal for safe operation - Easy adjustment of the lower die to the respective sheet thickness - High upper die for producing profiles with high hems

Condition: new, Universally applicable bending machine for metalworking and repair shops. Working length: 1270 mm Max. sheet thickness (400 N / mm²): 2.0 mm Max. opening width: 45 mm Bending angle: 0 - 135° Width: 1620 mm Depth*: 1115 mm Height: 1150 mm Weight approx.: 340 kg * with back stop Features: - Universally applicable bending machine for metalworking and repair shops - Robust construction in a modern design Fodpfovnrk Ejx Ahajgf - Easy adjustment of the upper beam using the foot pedal, hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending options - Optimal price-performance ratio - Fast and easy bending process using the bow handle - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for producing high-edged profiles Scope of delivery: - Segmented Upper beam - Back stop - Bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 250 | 270 mm

Condition: new, Bernardo Semi-Automatic Double Mitering Bandsaw MBS 600 DGA-V / 400 V Technical Specifications Cutting capacity, round / square 90° 410 mm / 300 x 300 mm Cutting capacity, flat 90° 540 x 300 mm Cutting capacity, round / square 45° R 400 mm / 260 x 260 mm Cutting capacity, flat 45° R 400 x 210 mm Cutting capacity, round / square 45° L 340 mm / 260 x 260 mm Cutting capacity, flat 45° L 380 x 170 mm Cutting capacity, round / square 60° R 260 mm / 175 x 175 mm Working height 965 mm Bandsaw blade dimensions 4290 x 34 x 1.1 mm Cutting speed, stepless 20 – 80 m/min Coolant pump 100 W Motor output S1 100% 2.2 kW Motor input S6 40% 3.0 kW Voltage 400 V Fedpfxezibdts Ahaegf Machine dimensions (L x W x H) 2340 x 1430 x 1550 mm Weight approx. 686 kg Mode of operation, semi-automatic: • Hydraulic clamping of the vise • Hydraulic lowering of the saw arm • Raising of the saw arm Scope of delivery • Saw blade • Workpiece stop • Base frame • Manometer for belt tension • Saw blade guide with carbide inserts • Quick-release vise • Coolant system • Hydraulic lowering cylinder • Motor circuit breaker • Automatic end stop

Condition: new, Bernardo Double-Column Bandsaw MBS 600 DG / 400 V Fgjdpfx Ahszibc Asaef Technical Specifications Cutting capacity, round / square, 90°: 410 mm / 300 x 300 mm Cutting capacity, flat, 90°: 540 x 300 mm Cutting capacity, round / square, 45° (right): 400 mm / 260 x 260 mm Cutting capacity, flat, 45° (right): 400 x 210 mm Cutting capacity, round / square, 45° (left): 340 mm / 260 x 260 mm Cutting capacity, flat, 45° (left): 380 x 170 mm Cutting capacity, round / square, 60° (right): 260 mm / 175 x 175 mm Working height: 866 mm Bandsaw blade dimensions: 4290 x 34 x 1.1 mm Cutting speeds: 45 / 90 m/min Coolant pump: 100 W Motor output power S1 100%: 2.2 kW Motor input power S6 40%: 3.0 kW Voltage: 400 V Machine dimensions (L x W x H): 2340 x 1430 x 1460 mm Weight: approx. 606 kg Scope of supply • Bandsaw blade • Workpiece stop • Base frame • Manometer for blade tension • Bandsaw blade guide with carbide inserts • Quick-release vise • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic end-of-cut shut-off