Used Schaffer 222 S for sale (10,880)

Condition: excellent (used), Year of construction: 1962, Functionality: fully functional, pressing force: 200 t, table width: 970 mm, table length: 1,600 mm, ram stroke: 800 mm, die cushion force: 40 t, year of last overhaul: 2022, Equipment: safety light barrier, Lasco FP 222 S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2022. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Bslsv E Efdjn E H Hmowl Lasco FP 222 S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2022. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: good (used), Year of construction: 2020, Functionality: fully functional, cooling capacity: 22 kW (29.91 HP), type of cooling: air, total width: 1,000 mm, total length: 2,000 mm, total height: 1,250 mm, warranty duration: 6 months, heating capacity: 24.3 kW (33.04 HP), Aircooled chiller/Heat pump S-KLIMA SAL223RS2 22 kW/24.3 kW Belnev Uyxqs E H Hmswl Cooling capacity: 22 kW / 6.26 tons (12/7 — 35°C) Heating capacity: 24.3 kW / 6.91 tons (40/45 —7°C) Year of manufacture: 2020 Options: Heat pump. Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi LVB65FAEMC (rotary, inverter) Type of refrigerant: R32 Number of fans: 1 pcs. Hydraulic module: 1 pcs. water pump Grundfos MGE80b, buffer tank 145 L. Dimensions: 2x1x1.25 m. Condition: Good

Condition: used, mileage: 60,842 km, power: 159 kW (216.18 HP), first registration: 01/1985, overall weight: 12,000 kg, fuel type: diesel, color: red, axle configuration: 4x4, maximum load weight: 4,520 kg, empty load weight: 7,480 kg, next inspection (TÜV): 01/2027, brakes: engine braking, driver cabin: other, gearing type: mechanical, suspension: steel, operating hours: 204 h, total length: 7,600 mm, number of seats: 9, Equipment: all wheel drive, trailer coupling, Non-binding offer - Subject to alterations and prior sale - Sale is subject to exclusion of any warranty - All information without guarantee! Beljwftauon E H Hmjwl

Condition: used, Working width 4000 mm Working height 2600 mm Number of cylinders 6 St. Dimensions (L/W/H) 5300 x 1250 x 3330 mm S&S frame press type RP 2000, ----- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Bwjln E Hou Uvalo Hmel Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center holes for the two Abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Printing plate and support width 130 mm Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm double-acting, with counterweight and One-hand quick adjustment, 2 pieces Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with weight balancing; 2 manual control valves, Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400 to 2400 kg pressure vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: 4000mm x 2600mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: ----- Article .00 pc Medium pressure bar with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article .00 pc Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Cross printing device complete with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve There is no weight compensation on the lower horizontal cylinder Article .00 pc Individual pressure control for transverse pressure device, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Shut-off valve on the 3rd vertical cylinder Article .00 pc Shut-off valve on the upper horizontal cylinder Article .00 pc Width allowance for compression of small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article .00 pc Basic equipment for counter profiles The space required in height increases by 100 mm Item All pressure plates and abutments covered with plastic Article .00 pc Triangle studio window pressing device consisting of: locking device of Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates Article .00 pc double pendulum pressure plate for pointed windows (triangle) ----- Total price in the above version ex works: On request! ----- Options: Article ....

Condition: used, Year of construction: 2019, operating hours: 514 h, 2019 | Schäffer | Schäffer 2445 SLT | Used Wheel Loader | 514 hours 📍Location: Germany, Friedberg 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 40600 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert Bwjlnewg Im Sj E H Hmol 55 inspection points 53 approved ✅ 1 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "32352 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: new, R. & S. Keller Control panel Sinumerik 820 T , unused, 100% functional Bweln E H Hji Ecl Ismol

Condition: good (used), Year of construction: 2012, S&T ST-40/55 VC Boln E H Hom Shcrsmewl Vertical Turning & Milling 2012 Fanuc 31i CNC Table diameter 4000 mm Turning diameter 5500 mm Turning height 2600 mm Table drive motor 60/75 KW Table speeds 60 rpm C-Axis 0.001° Milling spindle motor 22/26 KW Milling spindle speeds 1500 rpm 16 station tool changer Proposal Number V(K)-6833

Condition: used, Functionality: fully functional, power: 96 kW (130.52 HP), overall weight: 8,000 kg, lifting height: 5,000 mm, tire condition: 60 %, digging bucket width: 1,700 mm, Year of construction: 2005, operating hours: 11,387 h, machine/vehicle number: 01410085, Equipment: cabin, pallet forks, Sale of a used Schäffer telescopic wheel loader Technically sound Year of manufacture: 2005 Bwsln E Hsv T Rz Ts Hmjl Type: 930T Operating hours: 11,387.76 Weight: 8,000 kg Lift height: 5,000 mm Last service with oil and filter change at 11,187.73 hours Three working circuits The load indicator needs to be recalibrated Including folding bucket, fork, and brush Price is net

Condition: used, Metso GP300S Funnel Bwsljv Rn Dgen E H Hmsl

Condition: new, Working width 4000 mm Working height 2600 mm Bwolned Ih E Aj E H Hmol Number of cylinders 5 St. weight 2000 kg Dimensions (L/W/H) 5550x1300x3000 mm

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Bsln E Hevvkmbs Hmswl Storage location: Nattheim

Condition: new, R.& S. Keller control panel lid Dialog 11 , unused, 100% functional Bwelnei Ecmaj E H Hmel

Condition: good (used), Heidelberg Cylinder S 54×72 die-cutting machine Machine from production, ready to work. The cylinder was repaired a few years ago. Bolnjwdpcpe E H Hmswl Format 540x720mm Machine prepared for die-cutting. Fully automatic, central lubrication. The set includes a mounting frame, sheet metal for the cylinder, trolleys, a set of fillers and locks.

Condition: used, 1024, S-A-T Saalfelder Antriebstechnik GmbH rotary union for DS264 Bwoln Ejq S Ty Ro H Hmjl Model: 1024 Condition: Used

Condition: new, Year of construction: 2025, power: 37 kW (50.31 HP), _____Schäffer loader type 3650 SLTKubota 3-cylinder diesel engine D1803-CR-T 37 KW = 50 PSDOC and DPF to meet emission level VHydrostatic all-wheel drive with automotive controlTires 10.0/75-15.3 AS, ET-5HTF (High Traction Force)SPF (Schäffer Power Transmission)ECO modeHydraulic fast gear 20 km/h switchable under loadOriginal Schäffer axles, 6-holeCombined oil coolerMaintenance and wear-free multi-disk brake in oil bath as service and parking brakeMaintenance-free articulated pendulum jointRestraint system (overhead guard)1 x LED work light at the front on the swing armParallel guideAdditional control unit mechanically operatedWorking hydraulics standard / optional: 46 / 51 l/minAdjustable Steering column, hour meter, fuel and temperature gauge, rear weight end plate, seat contact switch, quick-change frame SWH with hydraulic locking, lighting system, standard paint finish RAL 1006, one-key system including lockable fuel cap, with operating instructions, special equipment, tires 31x15.5-15 AS 6-hole, ET-70, operating instructions 3650 (SLT) + 2445 S German, Euro-WS mounting frame with hydraulic locking, case weight 100 kg, hydraulic connections and plug-in couplings, work light set LED 800 lumens (2x front, 1x rear), TÜV certificate, self-propelled machine < 25 km/h, towing device with bolts and lashing eyes, storage location: null Bolnowftfde E H Hmowl

Condition: new, Working width 3500 mm Working height 2300 mm Boln E H Hod Rzc Rjmjwl Number of cylinders 4 St.

Year of construction: 1999, Condition: good (used), PCI -NF MEMBRANE FILTRATION PLANT Item: M-2199-PCI-NF Plant This plant is membrane filtration plant used for remove water and / or very low molecular weight substances from liquid dairy products. The low molecular weight substances that are typically removed with NF membranes are monovalent ions such as K ions and Na ions. Bjljhqhw Isn E H Hmowl With APV Rannie-High Press Pump Good condition, Not used last two years!. Year of Production: 1999. Dimension: L 4.000 MM W 1200 mm H 1900 mm Press: Medium pressure 20 bar Retentat flow: 1200 l/h

Condition: new, R.& S. Keller control panel lid Dialog 11 , in opened original packaging, unused, 100% functional Bwoln Eoi Ecmds H Hmel

Year of construction: 2014, Condition: ready for operation (used), A T-S-I mixing and dosing system for adhesives is available. System type: two-component gear pump dosing system, material type: 2K silicone, swivel arm length: 1200mm, hose length: 2500mm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 650kg. Documentation available. On-site inspection is possible. Bwsln E H Hewfg E Demsl

Condition: good (used), pressing force: 150 t, Hammer weight: 150 kg Stroke: 480 mm Strokes: 168 p/min. Throat: 375 mm Ram diameter: 180 mm Bjln E Hsubb Sts Hmewl Country of origin: UK Motor power: 11 kW Machine LxWxH: 200 x 180 x 240 cm Machine weight: 6000 kg

Condition: new, Year of construction: 2025, operating hours: 3 h, Ceetec A/S produces since 1970 wood painting machines in Norre Aaby, Denmark. According to the motto "keep it simple" all machines are reduced to necessary things combined with innovative Technology where it makes sense for our customer. Are surface spraying machine is equipped with No. 2 traverses and can paint material up to 200mm high and 1.800mm wide (standard is 100mm x 1.300mm). Beln E Hjffc Tyo Hmswl We can offer it with 1-2 paint circles for easy color management. It can be combined with our innovative drying systems or used as a stand alone machine. You are interested and want to see a line working? No problem, we will organize a visit at another customer for You. Do You have further questions? Please feel free to contact us whenever You want!

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Lower horizontal pressing cylinders with bore for two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders d = 60 mm, stroke 120 mm, single-acting, with counterbalance and One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm stroke, 120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves , Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550 4200 kg compression force vertically. With 3 kW three-phase motor for 400 volts , 50 Hz Operating voltage. Complete with electrical connection . Painting RAL 7035 anthracite gray with light gray RAL 7016 . (technical details according to manufacturer - without guarantee ! ) Bsln E Hod Ih H Ns Hmewl The detailed technical description can be found in the attached pdf file

Condition: new, R. & S. Keller Control panel Sinumerik 820 T , unused, in opened original packaging, 100% functional Bwsln E H Hsi Ecl Ssmjl

Condition: new, Working width 3500 mm Bjlod Ih H Sjn E H Hmjwl Working height 2300 mm Number of cylinders 4 St.

Condition: new, Working width 4500 mm Working height 3000 mm Number of cylinders 6 St. Dimensions (L/W/H) 5500x1400x3550 mm Weight 3000 kg S&S frame press Bavaria 2000 L ----- With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, Bwjlewg Hr Tsn E H Hmel with thick-walled special hollow profiles. Guideways of the pressure beams for the press corners in a low-abrasion machined version. Fast, smooth, manual width adjustment using ball-bearing carriage, fixing in 50 mm hole grid, optional motorized width adjustment with hydraulic clamping (at an additional cost). Height adjustment and pressing using long-stroke cylinders in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders is necessary, which avoids cylinder collisions. Lower support can be adjusted in several positions to the most suitable insertion height. 3 KW compact hydraulic system with integrated control block, variable pressure control from 20 - 120 bar, pressure gauge Control via touch button with separate control circuits for the vertical and horizontal press cylinders, mounted on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke adapted to working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint: RAL 7035 light gray with RAL 7016 anthracite gray Working size: length x height = 4,500 mm x 2,750 mm Note: Actual working size: 4,500 x 3,000 mm (length x height) Space required: 5,500 mm x 1,400 mm x 3,550 mm (LengthxWidthxHeight) Article medium pressure bar complete with pressure cylinder, pressure hose and shut-off valve up to 2,750 mm high Note: actual working height: 3,000 mm Article Individual pressure control for medium pressure bar, pressure control range up to max. 100 bar (For pressing cross-bar windows) Article infinitely height-adjustable cross pressure device, complete with pressure cylinder and abutment, throttle and shut-off valve Article Individual pressure control for cross pressure device pressure control range up to max. 100 bar (For pressing cross-bar window) Article Shut-off valve on the 3rd vertical cylinder Article Shut-off valve on the upper horizontal cylinder Article x slanted window control for vertical cylinder Article x pendulum pressure plates attachable for pressing up to 60 degrees Article Double pendulum pressure plate for pointed window (triangle) Article x extension for p...