Used Bosch Generator for sale (492)

Condition: used, BOSCH proportional valve NG16, NG6- removed from K-Tec 350 3F Cedpfx Aaot Sbfvo Tehc - removed from running machine - fully functionalmanufacturer: BOSCH  type: NG16, NG6 manufacturer no.:   spare part no.: 1type code: 4WRLE 16 X200M-3X/G24K0/A1WG02M-776 The number before the first slash describes the appliance series. For this reason, this digit of the type code on your old spare part may differ. If you have any questions, please do not hesitate to contact us. Dition: gebraucht

Condition: ready for operation (used), Year of construction: 1975, A Bosch OBD 10/53L 12 and a Bosch OBD 15/54L 17 are available, strip width: 250mm, usable height: 260mm, number of furnace doors: 3, doors: inlet, intermediate and outlet door, strip speed: 1.8m/min, cycle time: 25min, cycle distance: 700mm, operating temperature of decarburizing zone: 760°C, operating temperature of bluing zone: 550°C, heating capacity of decarburizing zone: 84kW, heating capacity of bluing zone: 18kW, evaporator heating capacity: 3kW, evaporator water consumption: approx. 0.5l distilled water/h, energy consumption: approx. 45kWh/100kg net weight, total decarburizing time: 150min, cycle time: 25min, cycles in the decarburizing zone: 6, decarburizing zone temperature: 760°C, holding time: 30min, propane/air ratio for protective gas generation: 1:18, protective gas quantity: approx. 35Nm³/h, propane quantity: 2Nm³/h, air quantity: 36Nm³/h, combustion tower temperature: 1250°C, dew point or cooling water temperature of direct cooler: 23.5-25.5°C, total bluing time: 75min, cycles in the bluing zone: 3, bluing zone temperature: 550°C, holding time: 50min, evaporator temperature: 120°C, total connected load: 111kW, length: 14,200mm, width: 1650mm, height: 3000mm, with an Exogas Generator Gebrüder Hammer GmbH and documentation. An on-site inspection is possible. Chsdpfx Asztrbwea Tsc

Condition: used, BOSCH pilot operated proportional valve - removed from running machine Chsdpfx Aaorr Egds Tjc - removed from Arburg 420 C 1 fully functional manufacturer: BOSCH manufacturer no.: PROP-WEGEVENTIL), PROP-WEGEVENTIL), control solenoid RM45) type code: 4WRL10Q5-85M-3X/G24TZ4/M-754, 4WRPH6C3B04P-2X/G24Z4/M, type code: The digit before the first slash describes the model series. For this reason, this digit of the type code on your old spare part may differ. If you have any questions, please do not hesitate to contact us. Dition: gebraucht

Condition: excellent (used), functionality: fully functional, A good used VFFS Machine from Bosch Model NEL100 - with forming set and printer mounting frame - machine is equipped with print registration photocell - was in use until recently Ready to Ship Worldwide Open to reasonable offers Cjdpfxsz H Tiyj Aa Tohc Request more pictures and videos on Whats App

Condition: new, Year of construction: 2020, functionality: fully functional, BOSCH Pharmatec CIP System 8X0400 – Never Used – GMP Pharma Version For sale is a complete BOSCH Pharmatec CIP (Cleaning in Place) system in new condition (Never Used). The system was manufactured in 2019/2020 but was never put into operation. Since delivery, it has been stored professionally and is in excellent condition. The system was developed according to the highest GMP standards and is ideally suited for the pharmaceutical, biotechnology, vaccine, and food industries. Technical Data Manufacturer: Bosch Pharmatec GmbH (now Syntegon) Type: CIP Unit 8X0400 Year of Construction: 2019 / 2020 Condition: Never Used / New GMP Version Stainless Steel Design CE Marking Immediately available Scope of Supply BOSCH Pharmatec CIP Unit 8X0400 Stainless Steel Water Tanks CIP Satellites Complete Pump Skids KPA Hygienic Pumps Endress+Hauser Measuring and Control Technology Hygienic Stainless Steel Piping Valves and Fittings Heat Exchangers Original Bosch Documentation P&ID Flow Diagrams Layout Drawings and Technical Documents Important Note The system is offered without pneumatic components and without control (automation). This allows the system to be individually adapted to the buyer's requirements and equipped with a modern PLC, pneumatic, and automation solution as desired. This offers maximum flexibility for new installations or integration into existing production facilities. Application Areas Pharmaceutical Industry Biotechnology Vaccine Production Sterile Production Facilities API Manufacturing Supply of Purified Media GMP Production Plants Cedpfxezpy Nzs Aa Tehc Contract Manufacturing (CMO) Advantages Original Bosch Pharmatec Quality Never Put Into Operation High-Quality GMP Version Complete Technical Documentation Available Flexible Retrofitting of Control and Pneumatic Technology According to Customer Requirements Immediately Available Significantly Cheaper Than a Comparable New System The system can be inspected by appointment. We will gladly send you further photos, technical documents and drawings upon request.

Condition: good (used), functionality: fully functional, A good used 6 station Volumetric cup filler which has been fitted with a variable speed indexing drive and PLC controls - cup volume of 3Litre max in single drop and system capability of multidump set on HMI controls This machine is ideal for filling any free flowing granular product or seeds/pulses - complete on floor stand and supplied with a top sub hopper. Please request more pictures and videos which can be sent on Whats App Ready to ship worldwide Chsdezzkr Dopfx Aa Tjc

Condition: good (used), diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator -Manufacturer: Bosch, injection pump from generator MWM RHS 518V16 -Injection pump: Bosch EP/RSUV300-750P9/332/1R PE8P120/520RS190 -Feed pump: Bosch FP/K 22 P11 -Shaft: Ø20 - 25mm / M18x1.5 -Individual components: see photos Chedpfjivfgfsx Aa Tsc -Dimensions: 1000/170/H290 mm -Weight: 41 kg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 140563, power: 1,300 kW (1,767.51 HP), overall weight: 2,600 kg, total width: 1,424 mm, total length: 3,787 mm, total height: 2,402 mm, pressure: 6 bar, heating capacity: 1,300 kW (1,767.51 HP), fuel: domestic gas H, operating pressure: 6 bar, Equipment: hot water, Bosch Unimat UT-L 10 industrial low-pressure hot-water boiler, manufactured in April 2023. Technical data: - Manufacturer: Bosch Industriekessel Austria GmbH - Model: Unimat UT-L 10 Chsdpfx Ajzp Rmqja Toc - Year of manufacture: 2023 - Serial number: 140563 - Rated thermal capacity including ECO: 1,300 kW - Maximum allowable pressure: 6 bar - Hydraulic test pressure: 9.6 bar - Allowable temperature range: 0–110 °C - Total boiler volume: 1,370 litres - Approximate dimensions: 3,786 × 1,424 × 2,402 mm - Approximate net boiler weight: 2,600 kg - Heating medium: low-pressure hot water - Design: three-pass flame-tube/smoke-tube boiler - Flue/appliance classification: EN 1749, B23 - CE marking: CE 0085 - Manufactured in Austria - Type plate available The stated dimensions and weight are manufacturer reference values for the UT-L 10 boiler body. Actual dimensions and transport weight may vary depending on the installed burner, economiser, fittings and control equipment. Fuel type and electrical connection data must be taken from the installed burner and control-cabinet nameplates. The exact scope of supply, operating condition and included documentation should be confirmed before purchase. Sale subject to prior sale and verification of the technical information. Included equipment, as shown in the photographs: - Natural-gas regulating and supply line - Gas pressure regulator - Gas meter - Pressure gauge - Motorised Bosch valve actuator - Butterfly shut-off/control valves - Associated pipe sections, flanges, gaskets and mounting components The components are supplied dismantled. Completeness and suitability for the buyer’s installation must be verified before commissioning.

Condition: excellent (used), Year of construction: 2008, BÖSCH/HEWEMA universal miter fence A97 for panel saws When in the closed position, 90° angle cuts are performed. When adjusting the cutting angle, the two fence profiles are moved synchronously. Cuts can be made on both the front and rear supports. The saw angle is read on the scale disc. Chsdpfxezbytlj Aa Tec

Condition: used, Year of construction: 2019, Year of manufacture: 2019 Includes saw blade Multiple units in stock 230 volts Condition: Used, in good condition Cjdpozyzcwofx Aa Tjhc Price: € 150,- including VAT

Year of construction: 2015, condition: ready for operation (used), A pharmaceutical sterilization autoclave Bosch (Schoeller-Bleckmann Medizintechnik) is available. Design: horizontal, doors: 2, chamber volume: approx. 1800l, process method: vacuum/steam/sterilization, sterilization goods: porous goods/solid instruments/components, max. liquid product volume: 50ml. Documentation available. An on site inspection is possible. Chedpfx Aajyuyvyj Toc

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, 1 used feedwater tank ----- Thermal feedwater degassing system insulated, cylindrical, with degassing dome, sludge collection tank Chodpfx Aajzz I N Hj Toc with base frame and platform Type: FT 1.5 Manufacturer: BOSCH Operating pressure max.: 0.5 bar Test pressure: 2.0 bar Temperature max.: 110°C Water content when full: 1,500 l Year of manufacture: 12/2016

Condition: used, functionality: unexamined, Due to warehouse clearance, we are selling a total of 12-15 used machines/presses/workshop presses (see pictures, including those from Bosch). The machines are mounted on sturdy base frames/tables and are ideal for workshops, production, hobbyists, or for obtaining spare parts. Individual price: €60 per machine. Package price: If you purchase all 7 machines, you will receive an attractive package price! Condition: Used, as shown in the pictures (see photos). Upon request, transport and loading can be arranged for an additional fee, and we can organize transport throughout Europe. Chsdpfx Ajzqtzmja Tjc Prices exclude VAT. Inspection is possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange is possible! Machine purchase and sale WE BUY/SELL PRODUCTION & METALWORKING MACHINES, AMONG OTHERS. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website.

Condition: excellent (used), For sale: a functional Rexroth hydraulic pump with a mounted Rexroth control valve. The condition of the housing, shaft, connections, and other components is shown in the pictures. Readings from the nameplates: Component Designation / Number Pump Type SY2DFEE-20/100-100/01073331+01073331 Codpfx Asz Ezv Eoa Tehc Pump Material Number (MNR) R901073415 Pump Serial Number 31132779 Additional Number on Pump Nameplate 000121315715 Pump Designation FD 07W02, SN 000001 Valve Type VT-DFPE-A-22/G24K0/2D0V/V-019 Valve Material Number (MNR) R901031176 Additional Number on Valve Nameplate 000121122273 Valve Designation SN 000002 The pump is used and shows signs of wear, as visible in the pictures. Before purchasing, it is recommended to compare the complete designations from the nameplates, the shaft, and the connections with the requirements of your machine.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 13459-01, input voltage: 400 V, input frequency: 50 Hz, The Bosch TFA 242 is a fully automatic thermoforming, filling, and sealing machine (FFS) designed for aseptic applications. The system is primarily designed for filling and packaging coffee creamer into single-serving cups. Technical data and performance characteristics: Capacity: The production output is 30,000 to 33,000 units per hour. Dosing: Set to a nominal volume of 10 ml (due to the design, a filling range of 6 to 12 grams is possible). Dimensions: The forming area (V) is 160 mm with a material width of 234 mm. Connection values: 400 V / 50 Hz / 3 phases. Materials: All parts in contact with the product are made of stainless steel. Process flow and scope of delivery: The aseptic filling process takes place under germ-free conditions via an integrated sterilization station. The scope of delivery for the system includes the central control panel, the sterilization and thermoforming unit, the connecting conveyor belts, and a downstream tube packaging machine (flow wrapper) for final packaging. Further information on aseptic processing: Continuous H₂O₂ disinfection of the upper and lower film directly before processing to prevent re-contamination. Sterile air forming process: Deep drawing in the encapsulated sterile tunnel using microfiltered compressed air. Overpressure encapsulation: Constant laminar flow overpressure in the filling and sealing area prevents the ingress of unsterile ambient air. Hermetic sealing: Thermal welding of the lid film takes place completely within the sterile zone before ejection. The Bosch can be refurbished or otherwise adapted by the manufacturer. Please contact us for further information. Cedpfx Ajzzfduoa Tjhc

Condition: used, Hydraulic power unit, Bosch Rexroth complete industrial hydraulic power pack with 15 kW Siemens motor, HYDAC oil cooler and WOERNER control system, Used Machine MAIN MOTOR AND PUMPS: Main drive motor: SIEMENS 15 kW (3~ Mot. 1LA7166-4AA61, 400/690 V, 1460 rpm, IP55, 99 kg) Rexroth main pump: A10VSO 28 DFLR/31R-PPA12N00 (250 bar, Vg = 28 cm³/rev) Chedpszxfnzefx Aa Tsc Rexroth 2nd pump: PGH5-21/080RE11VE4 (80 cm³/rev, internal gear pump) Rexroth 3rd pump: PGH2-22/006RR07VU2 COOLING AND FILTRATION: Oil cooler unit: HYDAC SA Cooling Systems (SCA 3L/40/2.0/M/A/1, max. 6 bar) Cooling circuit pump: HYDAC SYSTEM KFZP-3+4/3.0/P/90/40 (G 1 1/4") Cooling fan motor: A.O. SMITH 5.5 kW (400 V, IP55) Filter housing: REXROTH pressure filter housing (25 bar, 16.7 litres) CONTROL SYSTEM AND TANK: Temperature controller and display: WOERNER KTR-B/3/V300/T5/T5/TA (IP65) Hydraulic tank: Robust steel hydraulic oil tank with oil level indicator and inspection/cleaning opening. OVERALL DIMENSIONS: Width: 1700 mm Depth: 1300 mm Height: 1650 mm

Condition: ready for operation (used), functionality: fully functional, For sale is a special-purpose machine—a complete production line for manufacturing heating elements. The production line was designed and built by Bosch itself. The heating elements are suitable for use in instantaneous water heaters. You can see an image of these elements in the second picture of the gallery. The production line also includes a testing station. According to our checks, all required documentation is available. Transport and loading can be organized throughout Europe for an additional charge upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team looks forward to assisting you. Machinery Buying / Selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, MACHINE TOOLS, ETC. Are you looking for a high-quality yet cost-effective machine for your production? Or are you looking to sell your equipment? Cjdpozvfiyefx Aa Tjhc For more information or contact options, please reach us via the contact form.

Condition: ready for operation (used), Year of construction: 2007, A vertical high-performance flow wrapping machine Robert Bosch is available. Format range: 360mm, packaging capacity: 80bags/min. An on-site inspection is possible. Expected to be available June 2026. Cedpjyxratsfx Aa Tjhc

Condition: excellent (used), ///// PRICE LISTED FOR 1 UNIT ///// For sale: Professional Bosch Rexroth industrial screwdrivers designed for use in production lines and assembly workstations. The devices are characterized by high precision, durability, and the ability for continuous operation in industrial environments (automotive, series production). The items are used. They show normal signs of use but are in good technical condition. ⚙️ Available models (choose one) 🔹 Rexroth ESA075G-G (0 608 841 230) Torque: 75 Nm Speed: 530 rpm Year of manufacture: 2021 Chodpfsyzkhuox Aa Tsc Country of manufacture: Germany 🔹 Rexroth ESV073-G (0 608 841 247) Torque: 73 Nm Speed: 900 rpm Year of manufacture: 2020 Country of manufacture: Germany 🔹 Rexroth ESA150S-G (0 608 841 212) Torque: 150 Nm Speed: 380 rpm Year of manufacture: 2021 Country of manufacture: Germany 🔹 Rexroth ESA013G-G (0 608 841 225) Torque: 13 Nm Speed: 1000 rpm Year of manufacture: 2024 Country of manufacture: Slovenia 🔌 Common specifications Power supply: 3~230V Frequency: 0–250 Hz Power: 200W Manufacturer: Bosch Rexroth 📦 Scope of supply ✔️ 1x screwdriver (selected model) ✔️ Head (as per photo – straight or angled) 📊 Condition Used – normal signs of wear. Equipment in good technical condition. 🛠️ Application assembly lines automotive industry series production precision tightening

Condition: not inspected (used), Bosch Rexroth Cjdezh U R Rspfx Aa Tohc Type: SCARA SR6, control panel defective Bosch Rexroth articulated-arm robot, turbo SCARA SR6 with control unit Rated load: 2 kg Maximum load (sleeve diameter 20 mm): 5 kg Maximum load (sleeve diameter 25 mm): 8 kg Rated maximum moment of inertia (axis 4): 500 kgcm² Maximum moment of inertia (axis 4): 1000 kgcm² Horizontal force, continuous/maximum: 60/150 N Vertical force, continuous/maximum: 200/300 N Torque (axis 4), rated/maximum: 5/10 Nm Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2017, 1 used steam boiler Manufacturer: Bosch Type: U-MB 2020 Capacity: 2,000 kg/h Permissible operating pressure: 13.0 bar Increased test pressure: 24.1 bar Maximum temperature: 195°C Total volume: 2,065 l Year of manufacture: 01/2017 CE marking: CE 0036 Equipped with a Weishaupt gas burner, type WM-G20/3-A, 300-2,000 kW, ZM-LN design, 15-500 mbar, gas control system, separate control cabinet, Loos Boiler Control LBC boiler control system, feed water pump, Eco Type 1, capacity 89 kW, volume 41 liters, temperature 238°C, permissible operating pressure 31 bar, test overpressure 56 bar, Cjdpfx Aezltalja Tshc and the existing coarse and fine fittings.

Year of construction: 1996, condition: ready for operation (used), A Bosch candy forming machine is offered. Max. rope speed: approx. 125m/min, min./max. output: approx. 1000/4000candies/min, hourly output range: approx. 400kg/h-1200kg/h, rope diameter range: approx. 15mm/49mm, max. filling percentage: approx. 32%, control system: Siemens SIMATIC S5-95U. Weight: approx. 2400kg. Machine dimensions X/Y/Z: approx. 3900mm/1650mm/1750mm. Documentation available. An on-site inspection is possible. Csdpfx Aezpyytja Tohc

Condition: new, Bosch Rexroth Indramat Servo Motor Model: MHD093C-058-PG1-AN Material No.: R911273523 3-Phase Permanent Magnet Motor Liquid Cooled Csdpfezxbuwex Aa Tshc Holding Brake: 22 Nm, 24 V DC Continuous Standstill Torque: 23.0 Nm Liquid Cooled Torque: 43.7 Nm Maximum Speed: 6000 rpm Protection Class: IP65 Weight: approx. 24.6 kg Made in Germany Condition: New / unused old stock. The motor is supplied in its original packaging with protective packaging and documentation as shown in the pictures. The nameplate and product number are clearly visible in the photos. Suitable for industrial automation, CNC machines, machine tools and other Rexroth Indramat applications. Part Number: R911273523 Please check compatibility with your application before purchasing. Worldwide shipping available.

Year of construction: 2021, condition: used, empty load weight: 5 kg, Year of manufacture: 2021. Weight: 4.7 kg. Condition: good. 230 volts including case, drilling and chiseling. Multiple units in stock. Price: € 200,- excl. VAT Chjdpfozxvh Ejx Aa Tsc

Condition: excellent (used), functionality: fully functional, Set of proportional valves Manufacturer: Bosch Type: 0811404666 Type: 1817414313 Cjdpfxowkucbs Aa Tshc Price for both valves: 1200 EUR PRICE REDUCED TO 900 EUR!!!