CNC Table Drilling Machine

Toshiba BTD13F-R22

Condition: ready for operation (used), chuck outer diameter: 6,000 mm, controller model: Siemens/Heidenhain, empty load weight: 220,000 kg, Type: SD 600/6500 4 assen gerichte, kogelomloopspindels tussen kolommen: 6500 mm maximaal hoogte onder dwarsbalk: 4270 mm verticale beweging van de dwarsbalk: 2500 mm maximaal gewicht op tafel: 160 ton Itjdpfx Afjwaiuqs Ser koppel van de tafel: 30.000 MKP, 200 PK Verticale beweging van Z1 Z2: 1750 mm Twee onafhankelijke schaarliften aan elke kant van de draaibank, met bedieningseenheid Max turningdia -- passage: 6500 mm Power on the spindle: 200 HP Max hight of workpiece Z-axis: 4270 mm Number of speeds: 1 > 40 rev/min Long: 20 500 mm Wide: 8500 mm Height: 6290 mm (above ground-level)

Condition: good (used), grinding diameter: 1,600 mm, grinding length: 6,000 mm, Manufacturer: CINCINNATI Type: 60 x 216 Year of manufacture: 1970 Covex and Concave grinding 6 steady rest included 2 steady rest hydrostatic Coolant system with magnetic filter Measuring system with 5 arms caliber: Arm 1: Working area 1300 to 1600 mm Arm 2: Working area 1000 to 1300 mm Arm 3: Working area 700 to 1000 mm Arm 4: Working area 400 to 700 mm Specifications Metric US Standard Center height 787 mm Grinding diameter Ø 1574 mm Grinding length 5800 mm Grinding stone dimensions 914 x 101.6 x 304.50 mm Iedpfx Asvvvw Eef Sstr Grinding stone speed 1800 rpm Dimensions (estimate) Length 15100 mm Width 5500 mm Height 3550 mm Weight 120000 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Vertical Turret Lathe - Double Column / Brand: SCHIESS BRIGHTON Itedpexgv Egefx Af Sjr Type: Vertimaster / Year of construction: 2009 The machine can be inspected by appointment. Condition: Fully functional / operational. TECHNICAL DATA: Working area and traverse: - Max. Machining- / Swing diameter: 9.000 mm - Processing height max.: 6.000 mm - Faceplate diameter: 6.000 mm - Passage width between racks/pillars: 8.300 mm Power and torque: - Main drive: 240 KW - Max. Torque on the face plate: 250 kN m - Max. Workpiece weight: 150 tons Boring and milling device: - Power max.: 63 kW - Speed max.: 2.500 rpm - Torque max.: 2.200 Nm Support: - Cross section: 520 x 420 mm - Injection diameter min.: 750 mm - Cutting power at 6 m Diameter max.: 75 kN EQUIPMENT: - CNC-Control: SIEMENS Sinumerik 840D - Tool holder: SK 50 - Operating platform - Chip conveyor - Documentation - Additional excellent accessories ... There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale. Detailed technical data sheet and information on equipment available on request.

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 850 mm, spindle speed (max.): 6,000 rpm, X-axis: 4.230 mm Y-axis: 2.100 mm Isdpfx Afsxd H H Ae Sotr Z-axis: 850 mm CNC Controller: Heidenhain iTNC 530 Spindle nose: ISO 50 Spindle speed: 6.000 Rpm Toolchanger: 30 pockets Table size: 4.000 x 1.650 mm Distance between columns: 2.300 mm Featured with: - Vertical milling head attachement - Touch probe - Cooling throught spindle - Double chip conveyor - Cooling unit - Machine manuals Country of origin: Taiwan Machine LxWxH: 9000 x 3500 x 4000 mm +/- Machine weight: 30.000 kg

Condition: good (used), Year of construction: 2009, travel distance X-axis: 6,230 mm, travel distance Y-axis: 4,250 mm, travel distance Z-axis: 1,100 mm, table length: 6,000 mm, table width: 3,000 mm, table load: 15,000 kg, Portal milling machine KAO MING - KMC 636 Multiface Double guideway four box way construction Head changer for Multi-Face machining off larger compontents ATC tool changer for Horizontal and vertical milling head swivabel Distance table spindle nose    345 - 1445 mm Distance table spindle center 132 - 1232 mm Indexing Horizontal head 5 Degrees x 72 positions HeidenHain iTNC530 with HR410 handwheel Spindle torq 1018 Nm ISO50  X - Travel: 6230mm Y - Travel: 4250mm Z - Travel: 1100mm Distance between column: 3600mm Table Length: 6000mm Table Width: 3000mm Table load: 15000 Feed rate X-Axis: 7000mm/min. Feed rate Y-Axis: 8000mm/min. Itodpfexf Haxex Af Ser Feed rate Z-Axis: 10000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 26kW Speeds / ranges: 4000Rpm ATC / revolver: 30 Number of controlled axis:3+2 Chip conveyor: Yes Coolantsystem: Yes Length: 14330mm Width: 7913mm Height: 5080mm Weight: 66000kg

Condition: used, Year of construction: 1960, grinding diameter ca. 360 mm grinding length 1500 mm serial number 12013 Isdow Sya Topfx Af Sstr

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 13,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,200 mm, spindle speed (max.): 2,500 rpm, feed rate X-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, feed length W-axis: 1,000 mm, position of the milling head: 360, table load: 100,000 kg, rapid traverse X-axis: 20,000 m/min, rapid traverse Z-axis: 20,000 m/min, table length: 4,500 mm, table width: 3,500 mm, quill diameter: 180 mm, workpiece weight (max.): 100,000 kg, Equipment: rotational speed infinitely variable, CNC BORING MACHINE PAMA model SPEEDRAM 2000 Hydrostatic Numerical control Siemens Sinumerik 840D X-Axis mm 13,000 Y-Axis mm 5,000 Z-Axis mm 1,200 W-Axis mm 1,000 Total axial travel (Z+W) mm 2,200 Working feed on all axes mm/min 8,000 Rapid traverse X, Z, W mm/min 20,000 Rapid traverse Y mm/min 15,000 Spindle: Boring spindle diameter mm 180 Ram spindle dimensions mm 400 x 440 Spindle speed (3 ranges) max rpm 2,500 Spindle power (S1) kW 91 Rated spindle torque (S1) Nm 9,050 Boring spindle internal taper ISO 50 DIN 69871/2 AD-Type Big Plus Clamping plates: 2 units m2 30 + 30 = total 60 Table 1 dimensions mm 6,000 x 5,000 Table 2 dimensions mm 6,000 x 5,000 Load capacity Kg/m2 15,000 Thickness mm 300 T-slot dimensions mm 28 H12 - DIN 650 T-slot pitch mm 250 Rotary-Traverse Table TH 100: Table dimensions mm 3,500 x 4,500 Load capacity Ton 100 Longitudinal (V-axis) travel mm 3,000 Feed/rapid traverse speed V-axis mm/min 10,000 Auto right angle head mod. TS 35 360 Taper ISO 50 - DIN 69871/2 Spindle diameter mm 128.57 Max spindle speed rpm 2,000 Universal head TU 30 360 Taper ISO 50 - DIN 69871/2 Spindle diameter mm 128.57 Max spindle speed rpm 2,500 Facing slide – UT 5-630 S Platform diameter mm 630 Slide stroke mm 200 Max rotation speed rpm 250 Slide feed rate mm/min 1/400 Max machinable diameter mm 1,250 Chain tool magazine cu 130 r80 80 positions Complete with: - Accessory storage with 3+1 positions, closed fixed type Iodpfoxuq H Uex Af Sjtr - Workpiece probe with radio transmission (Renishaw) - Adaptive technology control - Tool life monitoring and twin tools management - Coolant through spindle - No. 3 chip conveyors USED MACHINE

Condition: used, Year of construction: 1965, There are two WMW SU 315x3000 available, connected load machine 1/ 2: 12.6/ 12kW, weight machine 1/ 2: 8.2/ 9t, machines need overhauling. Ijdpfx Asxg Ihgef Sjtr

Condition: used, WEBSTER & BENNETT EV 36” HIGH SPEED VERTICAL BORER MAKE WEBSTER & BENNETT, MADE IN ENGLAND MODEL EV 36” TABLE DIA 915 mm SWING 1168 mm HEIGHT UNDER RAIL 533 - 1016 mm SPEED 13.5 - 300 rpm FEED RATE 0.005-0.250 inch/min MAIN SPEED 40 HP PLUS Itsdpfx Asxp Na Nef Sor HIGH SPEED TAABLE EV SERIES MACHINE ELEVATING RAIL SAFETY GAURDING SET OF JAWS FULLY FUNCTIONAL GOOD SLIDES

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 700 mm, Completely overhauled plate-type boring mill from a high-end aerospace company. New control cabinet New drives New CNC control system X / Y / Z: 1,200 / 2,000 / 700 mm (Longitudinal travel = X, Cross travel = Y, Vertical/Spindle axial = Z) Further details upon request. Technical Data Spindle Boring spindle diameter: 100 mm Spindle taper: ISO 50 Milling spindle diameter: 185 mm Spindle axial travel: 700 mm Automatic infinitely variable spindle and vertical feed: 2 × 1,000 mm/min Rapid traverse spindle and vertical axis: 5,500 mm/min Minimum spindle axis height above table: 0 mm Maximum spindle axis height above table: 1,500 mm Maximum distance spindle nose to table center: 1,850 mm Spindle speed ranges – Torque range: 5–14 rpm – Continuous power range: 15–1,450 rpm Number of speed ranges (continuous power): 4 Range values (rpm): 6–51 / 49–160 / 140–460 / 440–1,450 Table Rotary table dimensions: 1,100 × 1,300 mm Longitudinal travel: 1,200 mm Cross travel: 2,000 mm Automatic infinitely variable cross and longitudinal feed: 2 × 1,000 mm/min Rapid traverse longitudinal and cross: 5,500 mm/min Automatic infinitely variable table rotation: 30–100 °/min Rapid table rotation: 5,000 °/min Lifting data (assembly/transport) Required for group 1: – 1 steel bar Ø 70 mm × 1,600 mm length – 1 steel bar Ø 70 mm × 2,400 mm length Iodpfexizccex Af Sstr – 4 rings for rope spacing – 4 wire ropes Ø 22 mm Weight group 1 approx. 12,500 kg For lifting group 2: – two wire ropes minimum Ø 18 mm Weight group 2 approx. 3,500 kg For lifting group 3: – use hand ropes Weight group 3 approx. 1,300 kg