Drilling and milling machine

MAXION BT 25 FST

Condition: new, Year of construction: 2022, Power: 1,1kW Itsdpogulr Hjfx Ad Nsb Drilling capacity steel / continuous drilling capacity: 30mm / 25mm diameter Speed range: 120 - 1810 rpm Speed steps: 9 Spindle mounting: MK-4 Drilling stroke: 120 mm spindle throat: 254 mm table size: 475 mm x 425mm Drilling table lateral tilting / rotating: 45° left / 360°. column diameter: 80 mm Quick chuck: 1 - 16 mm Weight: 132 kg

Condition: used, Year of construction: 2004, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm number of spindle speeds: 63 - 3.150 1/min feed stepless: 12-3000 / 6-1500 (Z) mm/min quill stroke: 100 mm milling-head swivable +/-: 90° spindle taper ISO: SK 40 surface area: 630 x 400 mm total power requirement: 8 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2 x 1,9 x 1,95 m universal milling machine with point to point control, Itedpfsk Hdu Djx Ad Neb mechanical handwheels, swivel - rotary table (mech.) +-45°, hydr. tool clamping, half cabin, coolant device, manuals (German language) *

Condition: good (used), bore capacity in steel (diameter) 25,0/30,0 mm throat 260 mm bore stroke 120 mm number of spindle speeds 80-1400 min-1 table surface area 410 x 390 mm total power requirement 0,8/1,5 kW Itedpfx Aeuhhzhsd Nsb weight of the machine ca. 250 kg dimensions of the machine ca. 0,75 x 0,6 x 1,15 m

Condition: used, Pillar drilling machines Itodpob N Ezrefx Ad Nsb

Condition: excellent (used), Surface of the base plate 880 x 700 mm Distance from spindle center to stand min./max. 220 / 620 mm Drill spindle: 13 mm passage Itodpfxsuigzps Ad Nsb Inner cone MK 3 Stroke 150 mm Spindle speeds 25 - 2560 rpm. Spindle feeds 0.06 - 0.12 - 0.25 mm/rev Motor power (1500/3000 rpm) 1.2 / 1.5 HP

Condition: used, Year of construction: 2015, machine/vehicle number: 188786, Tapping machine Make: MAXION Model: BT 15 GL Year of manufacture: 2015 - workshop tested Iedpfxsvc A U Do Ad Notb Machine no.: 188786 4 speeds 320, 560, 1,000 and 1,600 rpm. Accessories: - Lead screw device for jig-like threads - Lead screw change by means of quick coupling - Safety device against tool breakage - Program for single or continuous cycle - electronically controlled motor braking for single cycle - Electrical hood guard - electric chuck protection hood - 3m connection cable with 16A CEE plug - operating instructions incl. the following options: - Pull-out circuit After the safety device is activated device is activated, this enables the quill to be return the quill to the home position at the the push of a button. Without this device, the spindle must be the spindle must be turned back manually until the the home position.

Condition: good (used), Year of construction: 2006, machine/vehicle number: 860027, Offer 24331 Technical data: - Table surface 1700 x 550 mm - manual travel X / Y 1300 x 500 mm - MAXION drilling machine, type: BT 18 STP - Drilling capacity up to 18 mm - Tapping device up to M 16 - Drill spindle holder MK 2 - Drill spindle stroke with fine drilling depth adjustment 76 mm Itjdpfx Adeu Aq Ame Njb - Pneumatic feed unit PV 12 - throat depth 670 mm - Spindle speeds 100 - 1800 rpm - 200 - 3600 rpm - mot. Stroke of the drilling unit - mot. Table clamping x + y - Minimum quantities Lubrication - Pneumatic connection 6 bar - Connection 400 V - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, ALZMETALL AX 4 / SV pillar drilling machine 3KW Manufacturer: Alzmetall Type: AX 4 / SV Condition: NEW Year of manufacture: 2025 Drilling capacity steel E335 (St 60) 55 mm Thread cutting Steel E335 (St 60) M 42 Cast EN-GJL-200 M 56 Short spindle MK 4 Spindle stroke 140 mm Usable projection 300 mm Column diameter 145 mm Machine table, usable support 615 x 430 mm Distance spindle-table min./max. 150/735 mm T-slots, number x width x distance 2 x 14 x 224 mm Feed 0.1 + 0.3 mm/rev Machine height approx. 1850 mm Net weight approx. 380 kg Drive stepless Motor 1500 rpm Power 3.0 kW Spindle speed rpm 70-2400 Standard equipment: Main switch with motor protection switch, lockable Mushroom push button (latching) for EMERGENCY STOP Speed adjustment stepless Speed display digital Feed overload protection Protection class IP 54 Spindle protection with electrical protection Paint: DD structural paint signal white RAL 9003, PANTONE 7545c, black Machine oil: initial filling; Container supplied loose Available options: Ijdpfxexd Ttpe Ad Netb - LED machine light - Thread cutting device with soft start (from 2025) - Coolant device in the base - Digital drilling depth display - Drilling depth fine adjustment 0.1 mm

Condition: new, grinding range 2 - 13 mm Isdpfxoupxdqo Ad Notb sharp cornered angle min./max. 90 - 140 Grad connected load 230 V weight of the machine ca. 10 Kg dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Condition: new, ELMAG drill grinder DBG 832 W 8 - 32mm DBG - 3 in 1 The DBG series drill grinder is used for grinding twist drills made of HSS and carbide twist drills. The machine has integrated grinding stations for grinding the point angle, the clearance angle and for cross grinding. Special CBN or SDC diamond grinding wheels are used, which are to be used depending on the drill material. material. SDC coated grinding wheels Metal-coated synthetic diamond for sharpening carbide drills. CBN coated grinding wheels Deliver sensational sharpening results at very high speed and without annealing. The special thermal conductivity of CBN (boronite crystals) dissipates the resulting frictional heat into the wheel, preventing hardening of the cutting edge and virtually eliminating sparking. CBN has a higher thermal stability than diamond and is ideal for sharpening HSS tools due to lower wear. Optionally available: Itedpfxet Hhg Nj Ad Nsb Grinding wheel SDC for DBG 832 W Order no. No. 61016 Collet chuck holder for Ø 31-32 mm for DBG 832 W Collet set (ER40) 2-piece, Ø 31-32 mm for DBG 832 W Now free of charge with both models Collet holder and collet set ER 20 or ER 40 ADVANTAGES CBN grinding wheel for HSS Adjustment device for center angle 95°-135 Clearance angle grinding function Cross grinding function For drill bits 8-32 mm 23 collets 8-30 mm TECHNICAL DATA Grinding range drill bit Ø 8 - 32 mm Grinding range point angle 95 - 135 ° Speed 4400 rpm Motor power 0.25 kW Mains connection 230/50 V/Hz Length 490 mm Width 250 mm Height 260 mm Weight 27 kg