Pillar drilling machine

Alzmetall AB 4 SV

Condition: used, Column drilling machine ALZMETALL type AB 4 SV Machine no. No. 14805 Year of construction approx. 1980 drilling capacity 40 mm Spindle holder MK 4 - short quill throat 340 mm Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator gearbox - Reduction gear with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch Phedpfx Asn N Ekcef Sja - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg good condition

Condition: good (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 5742, - Drilling capacity in St 60, 30 mm - Short spindle MK 3 - Spindle stroke 120 mm - throat depth 293 mm - Table support 420 x 300 mm, 2 T-slots - Machined base plate 320 x 329 mm, 2 T-slots - Distance base plate - drill chuck 1000 mm - Feed via turnstile - Weight 220 kg - Spindle speed 160 - 2250 rpm - Operating voltage 380 V-50Hz Pjdpfeq U Swgox Af Ssha - Infinitely variable speed adjustment by means of adjustment lever - Motor speed in 2 stages, 700/1435 rpm - Tapping device with direction of rotation changeover after reaching the end stops - Coolant system completely installed. - Coolant tank in machine base - Work light with LED - RÖHM drill chuck 1 - 16 mm - New precision machine vice (test winner)

Condition: used, Technical details: bore capacity in steel (diameter): 28 mm throat: 345 mm bore stroke: 190 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 4 spindle speed:: 50 - 1280 / 4 steples U/min feed: 0,1; 0,2, 0,3 manuell/automastic mm/U Distance spindle/table max.: 200 - 800 mm table clamping surface:: 450 x 600 mm table rotating: 360 ° table adjustment: vertical 600 mm column diameter: Ø 160 mm weight of the machine ca.: 273 kg dimension machine xH: 1,0 x 0,71 x 2,0 m Thread cutting with right and left rotation via foot switch Table adjustment via hand crank Without coolant tank Machine vice Quick-action clamping chuck Röhm Supra 3 - 16mm i.D. Phodpfx Afsu Idk Ue Soa *

Condition: used, Year of construction: 1978, bore capacity in steel (diameter) 40 mm throat 345 mm bore stroke 200 mm Pjdpfxev Ehfte Af Seha table surface area 720 x 5 mm

Condition: new, ELMAG Geared pillar drill GBM 3/30 SNA - Set Fast geared pillar drill 1,200 / 900 W The robust GBM 3/30 SNA pillar model is equipped with a powerful special gearbox, has a drilling capacity of 30 mm in steel and, with a quill spacing of 820 mm, offers plenty of space for holding tall workpieces. Helical gears made of steel and pressed material ensure high load capacity and smooth running. The GBM 3/30 SNA is therefore a perfect solution for medium-sized requirements in steel construction and metalworking stores, also for small batch processing. Standard equipment - Quick-action drill chuck B 16, 1 - 16 mm - Taper arbor MK 3 / B 16 - Reducing sleeve MK 3 / MK 2 - Reducing sleeve MK 3 / MK 1 - Drive-out wedge - Operating instructions / CE Set equipment - GBM 3/30 SNA geared pillar drill - Machine vice 120 or 150 mm Podpfx Afjt Edzao Soha - Two clamping screws 14 mm - 9-piece drill cartridge, 14.5 mm - 30 mm, MK 2 / MK 3 - Cutting oil spray ADVANTAGES Drilling capacity Ø 30 mm Automatic sleeve feed (0.1; 0.15; 0.22; 0.33 mm/rev) Cubature 500x350x870 mm Spindle projection 320 mm Powerful drive motor 400 V, 2-stage 1,200 / 900 W Smooth-running quality gearbox with heavy-duty helical gearing 8 speeds 75 - 3,010 rpm Drill spindle with precision bearing Clockwise and counter-clockwise rotation Drill spindle protection cover Drilling depth scale and stop Tool ejector Large, precise drill table with T-slots and coolant channel Heavy-duty, ground steel column with gear rack Rotatable and height-adjustable drill head Heavy-duty, ground steel column with toothed rack Emergency stop button / zero voltage release TECHNICAL DATA Drilling capacity in steel 30 mm Thread cutting capacity M22 Spindle holder (turning spindle) MK 3 Speed range 75 - 3010 rpm Speed steps 8 Quill stroke 150 mm Quill feed stages 4 Column diameter 105 mm T-slots, width 14 mm Drill head stroke 270 mm Drill table stroke 500 mm Spindle projection 320 mm Drill table rotatable ± 180 ° Drill head rotatable ± 180 ° Quill spacing table 50 - 820 mm Drilling table surface 500x350 mm Motor power (2-stage) 900 / 1200 W Mains connection 400/50 V/Hz Cubature 500x350x870 mm Base plate area (lxw) 400x670 mm Weight 210 kg

Condition: good (used), Year of construction: 1999, machine/vehicle number: 20403, Offer 25170 Technical Data: - Drilling capacity in steel ST 60 40 mm - Drilling ability in steel ST 60 50 mm - Drill spindle mount MK 4 - Drill spindle stroke 180 mm - Drill spindle speeds steplessly adjustable with gear stage - Stage 1 60 - 210 rpm - Stage 2 210 - 765 rpm - Stage 3 120 - 420 rpm - Stage 4 420 - 1530 rpm - Throat 330 mm - 3 feeds 0.1 - 0.2 - 0.3 U/min - Table with 2 T-slots 720 x 360 mm - Height adjustable via rack with hand crank - Max. distance table – drill spindle ca. 780 mm - Max. distance machined base plate - drill spindle 1250 mm - Coolant device - Lighting - Machine vise - Various 10 pcs HSS drills - Drive 400 V / 2.6 / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm Pjdpfx Aewncaiof Soha - Weight approx. 350 kg

Condition: used, Year of construction: 1965, bore capacity in steel (diameter) 40 mm Phedev S Iqcepfx Af Ssa total power requirement 4 kW

Condition: new, ELMAG Geared pillar drill GBM 3/25 SNE - Set Fast geared drilling machines 900 / 650 W The more often carbide and stainless steel have to be machined, the more likely it should be a powerful geared drilling machine - also ideal for thread cutting. Thanks to a gear wheel combination made of steel and pressed material, the powerful GBM 3/25 TNE & SNE are particularly smooth-running. With a top speed of 2,900 rpm, you have an optimum cutting speed for small bores. The machines are equipped with clockwise and counter-clockwise rotation for thread cutting. GBM 3/25 TNE & SNE super set offer - Geared bench drill GBM 3/25 TNE or SNE - Machine vice 125 mm - Two clamping screws 14 mm - 9-piece drill cassette, 14.5 mm - 30 mm MK 2 / MK 3 Standard equipment - Quick-action drill chuck B 16, 1 - 16 mm - Taper arbor MK 3 / B 16 - Reducing sleeve MK 3 / MK 2 - Reducing sleeve MK 3 / MK 1 - Drive-out wedge - Operating instructions / CE Set equipment - Geared bench drill GBM 3/25 SNE - Machine vice 120 mm - Two clamping screws 14 mm - 9-piece drill cartridge, 14.5 mm - 30 mm MK 2 / MK 3 - Cutting oil spray ADVANTAGES Drilling capacity Ø 25 mm Cubature 290x250x580 mm Spindle projection 255 mm Powerful drive motor 400 V, 2-stage 900 / 650 W Smooth-running quality gearbox with heavy-duty helical gearing 8 speeds 105 - 2,900 rpm Drill spindle with precision bearing Clockwise and counter-clockwise rotation Drill spindle protection cover Drilling depth scale and stop Tool ejector Precisely machined drill table with T-slots and coolant channel Rotatable and height-adjustable drill head Pedpet Edpwjfx Af Ssha Heavy-duty, ground steel column with toothed rack Emergency stop button / zero voltage release With 5 meter connection cable and 16 amp EURO CEE safety plug TECHNICAL DATA Drilling capacity in steel 25 mm Tapping capacity M16 Spindle holder (turning spindle) MK 3 Speed range 105 - 2900 rpm Speed steps 8 Quill stroke 120 mm Column diameter 100 mm T-slots, width 14 mm Drill head stroke 580 mm Drill table stroke 530 mm Spindle projection 255 mm Drill table rotatable ± 180 ° Drill head rotatable ± 180 ° Quill distance table 0 - 840 mm Drilling table surface 500x350 mm Motor power (2-stage) 900 / 650 W Mains connection 400/50 V/Hz Cubature 500x350x840 mm Base plate area (lxw) 400x500 mm Weight 180 kg

Year of construction: 1978, condition: used, number of spindles 3 bore capacity in steel (diameter) 40 mm Psdpfx Afjd Ih S Ss Seha bore stroke 180 mm weight of the machine ca. 2,3 t

Condition: used, Year of construction: 1989, machine/vehicle number: 19216, Lg.no. 22614 Technical data: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drill spindle holder MK 4 - Drill spindle stroke 180 mm Phedpfxjt Etiyj Af Ssa - Drill spindle speed infinitely variable with reduction gear - Stage 1 60 - 210 rpm - Stage 2 210 - 765 rpm - throat depth 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - max. distance table - drilling spindle approx. 780 mm - max. distance machined base plate - drilling spindle approx. 1250 mm - Coolant device - Lighting system - Drive 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

Condition: good (used), Year of construction: 1985, machine/vehicle number: 16924, Offer 22090 Technical data: - Drilling capacity in steel ST 60 20 mm - Drill spindle holder MK 2 - Drill spindle stroke 120 mm - 4 drill spindle speeds 400 - 2000 rpm - throat depth 250 mm - Max. distance table - drill spindle 720 mm - Table with 2 T-slots 440 x 360 mm - Height adjustable via rack and pinion with hand crank - Drive 380 V / 0.6 kW - Space requirement approx. W 550 x H 1900 x D 850 mm Podpfx Aotz T Dvef Soha - Weight approx. 260 kg - with: - Drill chuck 3 - 12 mm

Condition: good (used), Year of construction: 1984, machine/vehicle number: 15470, Offer 25095 Technical specifications: - Drilling capacity in steel ST 60: 40 mm - Drilling capacity in steel ST 60: 50 mm - Drill spindle mount: MT 4 Phsdowd Ii Ujpfx Af Soa - Drill spindle stroke: 180 mm - Drill spindle speeds continuously adjustable with gearing - Stage 1: 50 - 175 rpm - Stage 2: 175 - 640 rpm - Throat depth: 330 mm - 3 feed rates: 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots: 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - Max. distance between table and drill spindle: approx. 780 mm - Max. distance between machined base plate and drill spindle: approx. 1250 mm - Coolant system - Lighting - Drive: 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg